Charge transport modulation of silicon nanowire by O2 plasma

The modification of the electrical characteristics of field-effect transistors (FETs) with channels composed of n- or p-type silicon nanowires (SiNWs) by oxygen plasma treatment is investigated in this study. The SiNWs obtained from silicon bulk wafers are <111> surface-oriented and their doping concentrations are 10²¹ and 10¹⁷ cm⁻³ for the n- and p-type SiNWs, respectively. After the back-gate SiNWFETs were subjected to oxygen plasma treatment, the magnitude of the drain current of the n-type SiNWs was decreased, whereas that of the p-type SiNWs was increased, while the gate-dependent characteristics of both of types of SiNWs were improved. The changes in the electrical characteristics are due to the adsorption of oxygen ions on the surface of the SiNWs. To verify the effect of the oxygen ions, the SiNWFETs were kept in a vacuum for 24 h whereupon their electrical characteristics tended to revert to their inherent state.     

Formation and Electrical Evaluation of a Single Metallized DNA Nanowire in a Nanochannel

A novel fabrication process was developed for a single silver nanowire using DNA metallization in a nanochannel, and the electrical properties of this nanowire were evaluated using electrochemical impedance spectroscopy. After being isolated using a nanochannel measuring 500 nm in depth and 500 nm in width, a single λDNA molecule was electrostatically stretched and immobilized between two electrodes separated by a gap of 15 μm by applying an AC voltage of 1 MHz and 20 V_p‐p. Then, naphthalene diimide molecules terminally‐labeled with galactose moieties were intercalated into the λDNA, and the reduction of silver ions along the λDNA led to its metallization with silver. Scanning electron microscopy observations revealed that two nanowires having different average widths of 154 nm and 250 nm were formed in two individual nanochannels. The nanowires showed the linear current‐voltage characteristics, and their combined resistance was estimated to be 45.5 Ω. The complex impedance of the nanowires was measured, and an equivalent circuit was obtained as a series connection of a resistance and a parallel resistance‐constant phase element circuit. Impedance analysis revealed that the nanowire included silver grain boundaries, and the bulk resistivity of silver grain was estimated to be 8.35×10^?8 Ωm.     

Comparative study of ZnO and CuSCN semiconducting nanowire electrodeposition on different substrates

In this study, we are reporting on the electrochemical deposition of two kinds of semiconducting nanowires (ZnO and CuSCN) on different substrates. ZnO and CuSCN are n- and p-type transparent semiconductors whose electrochemical preparation has some similarity, and it is a combination of two steps: an electrochemical reduction with consecutive chemical precipitation. Here, we show that despite the different physicochemical nature of the studied materials, when they are deposited electrochemically, their dimensions depend mainly on the surface state of the used substrate. Thus, depending on the substrate morphology, nanowires with diameters between 50 and 380 nm from both semiconductors could be grown. It is also shown that ZnO and CuSCN nanowires could be successfully grown on glass and plastic substrates as well as on a metallic one. The possibility of growing these transparent semiconductors on flexible substrates opens new perspectives for their use in “invisible” electronic devices.     

Ultrasensitive SERS Detection of TNT by Imprinting Molecular Recognition Using a New Type of Stable Substrate

We report herein a method for the ultra‐trace detection of TNT on p‐aminothiophenol‐functionalized silver nanoparticles coated on silver molybdate nanowires based on surface‐enhanced Raman scattering (SERS). The method relies on π‐donor–acceptor interactions between the π‐acceptor TNT and the π‐donor p,p′‐dimercaptoazobenzene (DMAB), with the latter serving to cross‐link the silver nanoparticles deposited on the silver molybdate nanowires. This system presents optimal imprint molecule contours, with the DMAB forming imprint molecule sites that constitute SERS “hot spots”. Anchoring of the TNT analyte at these sites leads to a pronounced intensification of its Raman emission. We demonstrate that TNT concentrations as low as 10^?12 M can be accurately detected using the described SERS assay. Most impressively, acting as a new type of SERS substrate, the silver/silver molybdate nanowires complex can yield new silver nanoparticles during the detection process, which makes the Raman signals very stable. A detailed mechanism for the observed SERS intensity change is discussed. Our experiments show that TNT can be detected quickly and accurately with ultra‐high sensitivity, selectivity, reusability, and stability. The results reported herein may not only lead to many applications in SERS techniques, but might also form the basis of a new concept for a molecular imprinting strategy.     

Differential thermal analysis of porous silicon

Porous silicon materials, macro- and mesoporous silicon, obtained by electrochemical anodic etching of n- and p-Si were studied by differential thermal analysis at a steady temperature rise and under isothermal conditions in nitrogen atmosphere and in air. The method was used to estimate the presence and amount of phases of surface volatile compounds. The possibility was studied to perform a comparative estimate of the specific surface area of different types of porous silicon from data on the surface oxidation kinetics determined by the dynamic differential thermal analysis in air.     

Coefficient seebeck et méanismes de conduction dans les polymères (PPP) electroactifs dopés par implantation ionique

A study of the Seebeck coefficient has shown that doping of polyparaphenylene by ion implantation makes it possible to obtain an electronically doped semiconductor at low energy: n-type with alkali metal ions and p-type with halide ions. At the highest energies (E > 100 keV) the p-type conductivity is due to the creation of defects by irradiation. Generally the semiconductor obtained is degenerate with a Seebeck coefficient close to that obtained by chemical doping. Study of the mechanisms of conduction suggests plots of log σ = (T^?l/n); the greater n is, the better is the agreement between the experimental curve and theory. Representation of the conductivity is proposed according to Mott's theories, which are applicable to amorphous semiconductors and involve several conduction processes in the temperature space. For the variable-range-hopping (VRH) mechanism at low temperature, two parameters, α^?1 (representing the spatial separation of hopping sites) and N(E_F) (the density of states at the Fermi Level) are obtained.     

Light-induced noncovalent fixation of DNA and synthetic polyions on the surface of silicon single crystals

The paper presents a simple method for fixing DNA and synthetic polyions on the surface of p and n type Si(100) single crystals. Different methods for preparing the surface for DNA fixation are compared. It is shown that the conformation of macromolecules fixed on a substrate depends on the presence of bivalent counterions in solution and the charge properties of the surface and polymer. The results of fixation were checked and analyzed by atomic force microscopy (AFM).     

Doping Effects in CMOS-compatible CoSi Thin Films for Thermoelectric and Sensor Applications

Abstract . We report on semi-metallic cobalt monosilicide (CoSi) as a CMOS-compatible thermoelectric (TE) material and discuss the effect of n- and p-type dopants on its transport properties. Thin films of CoSi are developed using chemical vapor deposition tools and subsequent rapid thermal processing. Film properties such as microstructure, crystallinity and elemental distribution are studied via electron microscopy, X-ray diffraction and time-of-flight secondary ion mass spectroscopy. Doping silicon with boron prior to silicidation impedes the Co-Si diffusion process, while phosphorus atoms distribute uniformly in silicides with no voids or agglomerations. CoSi makes a suitable n-type TE candidate and provides an alternative to Si or SiGe materials. Transport properties of undoped CoSi exhibit a linear dependence within the investigated temperature window, whereas dopants in CoSi increase the number of electron carriers that contribute to charge transport and thereby influence the Seebeck coefficient. Thus, TE characteristics of thin CoSi films can be tuned via (i) the type of dopants used and/or (ii) varying the residual silicon thickness post silicidation.     

完全绿色路线获得的银纳米线的表面增强拉曼光谱

以硝酸银为银源,在硅片上成功地制备了银纳米线。该制备步骤在室温下操作,用环境友好的化合物乙二醇作还原剂。这是一个完全“绿色的”制备路线。用XRD、SEM和EDX对新制备的产物进行了表征,结果表明该银纳米线很纯,平均直径20nm。该银纳米线用于罗丹明6G的表面增强拉曼光谱测定,当罗丹明6G为10nM时,出现了特征峰。     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.     

Atomically Precise Nanocluster Assemblies Encapsulating Plasmonic Gold Nanorods

The self‐assembled structures of atomically precise, ligand‐protected noble metal nanoclusters leading to encapsulation of plasmonic gold nanorods (GNRs) is presented. Unlike highly sophisticated DNA nanotechnology, this strategically simple hydrogen bonding‐directed self‐assembly of nanoclusters leads to octahedral nanocrystals encapsulating GNRs. Specifically, the p‐mercaptobenzoic acid (pMBA)‐protected atomically precise silver nanocluster, Na₄[Ag₄₄(pMBA)₃₀], and pMBA‐functionalized GNRs were used. High‐resolution transmission and scanning transmission electron tomographic reconstructions suggest that the geometry of the GNR surface is responsible for directing the assembly of silver nanoclusters via H‐bonding, leading to octahedral symmetry. The use of water‐dispersible gold nanoclusters, Au_≈250(pMBA)_n and Au₁₀₂(pMBA)₄₄, also formed layered shells encapsulating GNRs. Such cluster assemblies on colloidal particles are a new category of precision hybrids with diverse possibilities.     

Magnetron sputtering of silver nanowires using anodic aluminum oxide template: a new active substrate of surface enhanced Raman scattering and an investigation of its enhanced mechanism

A high quality anodic aluminum oxide (AAO) template with ordered apertures about 50-80 nm was fabricated by anodizing aluminum in electrolytes through a two-step method, and silver nanowires with diameters from 40nm to 70nm were prepared on this AAO template by magnetron sputtering. On the glass covered with silver nanowires, high quality surface enhanced Raman scattering (SERS) spectra of sudan II (C₁₈H₁₆N₂O) with enhancement factors of 10⁵ were obtained. And comparison of SERS spectra on silver nanowires with the SERS spectra of silver colloids indicates that main enhanced mode is lightning rod effect of nanorods on the Sudan II/silver nanowires system.     

Electrodeposited Silver Nanoparticles on Carbon Ionic Liquid Electrode for Electrocatalytic Sensing of Hydrogen Peroxide

Silver nanoparticles (narrowly dispersed in diameter) were electrodeposited on carbon ionic liquid electrode (CILE) surface using a two‐step potentiostatic method. Potentiostatic double pulse technique was used as a suitable and simple method for controlling the size and morphologies of silver nanoparticles electrodeposited on CILE. The obtained silver nanoparticles deposited on CILE surface showed excellent electrocatalytic activity (low overpotential of ?0.35 V vs. Ag/AgCl) towards reduction of hydrogen peroxide. A linear dynamic range of 2–200 μM with an experimental detection limit of 0.7 μM (S/N=3) and reproducibility of 4.1% (n=5) make the constructed sensor suitable for peroxide determination in aqueous solutions.     

Synthesis, characterization and optical properties of silver and gold nanowires embedded in mesoporous MCM-41

Uniform nanowires of silver and gold inside the channels of MCM-41 were prepared by controlled reduction of their respective metal salts with sodium borohydride (NaBH₄). Presence of nanowires of silver and gold in MCM-41 were confirmed by high angle X-ray diffraction (XRD) data (peaks between 2ϑ = 30 − 60°) and transmission electron microscopy (TEM) confirmed the diameter of the nanowires. Diameter of nanowires is found to be ∼ 2.8 nm which is coincident with channel diameter of MCM-41. Optical properties of these heterostructured materials Ag-MCM-41 and Au-MCM-41 reveals the presence of surface plasmon absorption peaks of silver and gold respectively, and the shift in the absorption bands are associated to agglomeration of clusters inside the channels. Room temperature photoluminescence spectra exhibits interesting optical properties as observed for direct band gap semiconductors. Non-linear optical properties (NLO) corresponding to second harmonic generation (SHG) values were also recorded for self supported films of these heterostructured materials. Enhanced optical non-linearity was found to be arising from a corresponding increase of local field near the surface plasmon resonance. Further enhancement in SHG was found with poling due to an induction of orientation order.     

多孔硅和掺镨多孔硅的光致发光

多孔硅在室温下发出光致荧光展现了硅用作光电子材料和显示技术材料的前景。掺入希土元素可以改善硅的发光性能。本文首次报道多孔硅掺希土的一种新的电化学掺杂方法——恒电位电解,和一种希土硝酸盐-支持电解质-有机溶剂的新电解体系。这一方法和体系的特点是通过采用适当外加电压来控制电解产物,提高掺入的希土浓度,提高发光强度;同时可避免析出使发光不稳定的产物,提高发光稳定性。优化了阳极氧化制备多孔硅的条件和阴极还原制备掺镨多孔硅的条件(镨化合物浓度、溶剂、离子强度、电解电压、时间),获得了光致发光强度高于多孔硅的掺镨多孔硅,并讨论了多孔硅和掺镨多孔硅的光致发光机制。     

The Geometric Structure of Silver‐Doped Silicon Clusters

Cationic silver‐doped silicon clusters, Si_nAg⁺ (n=6–15), are studied using infrared multiple photon dissociation in combination with density functional theory computations. Candidate structures are identified using a basin‐hopping global optimizations method. Based on the comparison of experimental and calculated IR spectra for the identified low‐energy isomers, structures are assigned. It is found that all investigated clusters have exohedral structures, that is, the Ag atom is located at the surface. This is a surprising result because many transition‐metal dopant atoms have been shown to induce the formation of endohedral silicon clusters. The silicon framework of Si_nAg⁺ (n=7–9) has a pentagonal bipyramidal building block, whereas the larger Si_nAg⁺ (n=10–12, 14, 15) clusters have trigonal prism‐based structures. On comparing the structures of Si_nAg⁺ with those of Si_nCu⁺ (for n=6–11) it is found that both Cu and Ag adsorb on a surface site of bare Si_n⁺ clusters. However, the Ag dopant atom takes a lower coordinated site and is more weakly bound to the Si_n⁺ framework than the Cu dopant atom.     

Selective Detection of p‐Phenylenediamine in Hair Dyes Based on a Special CE Mechanism Using MnO2 Nanowires

We report a novel approach for selective determination of p‐phenylenediamine in hair dyes using β‐MnO₂ nanowires modified glassy carbon (GC) electrodes through an electrochemical co‐deposition process with chitosan hydrogel. A special CE (chemical reaction and electron transfer) process on the surface of β‐MnO₂ nanowires modified GC electrode is proposed and proved by cyclic voltammetry and UV‐Vis spectroscopy in the presence of p‐phenylenediamine. p‐Phenylenediamine can react with MnO₂ nanowires to produce diimine and the equilibrium of the two‐electron and two‐proton redox process of p‐phenylenediamine on the electrode is changed, and consequently the reductive current is enhanced significantly. At a constant potential of 0 V vs. SCE, other main components of hair dyes including o‐, m‐phenylenediamine, catechol, resorcinol, and p‐dihydroxybenzene do not interfere in the determination of p‐phenylenediamine in the amperometric measurement because of their much lower chemical reaction activities with MnO₂ nanowires. It shows a determination range of 0.2–150 μM and a low detection limit of 50 nM to response p‐phenylenediamine. This modified electrode is successfully used to analyze the amount of p‐phenylenediamine in hair dyes without preseparation procedures.     

Ag核Au壳双金属复合纳米线的制备及其表面增强拉曼光谱研究

采用氧化铝模板结合交流电沉积技术制备纯银纳米线, 然后通过化学还原方法, 并控制加入的金盐的量, 在已制备好的银线表面包裹不同厚度的金壳层, 得到具有核壳结构的Ag_核Au_壳复合纳米线. 采用电子显微镜(SEM, TEM)和表面增强拉曼光谱对该复合结构纳米线进行相关表征, 纳米线的表面形貌与加入的金盐的量有关. 以苯硫酚(TP)和对巯基苯胺(PATP)为探针分子, 研究了此类复合纳米线的表面增强拉曼散射效应. 并以PATP在金银纳米线表面吸附的表面增强拉曼光谱的差别为探针, 表征了复合纳米线表面金的包裹程度, 结果表明一定厚度的包裹程度可制备无针孔效应的核壳结构金银复合纳米线.     

多孔硅上银纳米粒薄膜的制备及其表面增强红外光谱

通过简便的化学沉积法在多孔硅上制备银纳米粒薄膜用于表面增强红外光谱检测。通过Ag⁺与多孔硅表面的SiHx发生氧化还原反应将银纳米粒子沉积在多孔硅表面。红外探针分子溶解于无水乙醇中进而被均匀分散在多孔硅表面,实验结果显示：对氨基苯硫酚、对氨基苯甲酸和对氟苯硫酚3个探针分子的红外峰分别最大增强了10、85和21倍。银纳米粒的大小和形状等物理特性、探针分子是否有与银表面进行强结合的基团和芳烃结构、以及表面选律等因素影响表面增强红外的吸收效应。