V形咔唑衍生物的合成及荧光性质

以N-烷基咔唑作为电子给体和共轭桥中心, 二米基硼作为端基电子受体, 合成了两个V形A-π-D-π-A型新化合物: 3,6-二{[(E)-2-(5-二米基硼)噻吩]乙烯基}-N-丁基-咔唑 {N-butyl-3,6-bis{(E)-2-[5-(dimesitylboryl)thiophen-2-yl]-vinyl}-carbazole, BBTC}和3,6-二[(E)-(4-二米基硼)苯乙烯基]-N-己基-咔唑, {N-hexyl-3,6-bis[(E)-4-(dimesitylboryl)-styryl]-carbazole, BBSC}. 这两个化合物在蓝绿光波段都有较强的荧光发射. 光谱数据表明, 扩大共轭体系并在端基引入含硼基团导致吸收谱和发射谱显著红移, 并增大分子内电荷转移.     

季铵盐型阳离子表面活性剂与牛血清白蛋白的相互作用

本文合成并表征了三种不同烷基链长度的季铵盐型阳离子表面活性剂：N-十二烷基-N-（2-羟乙基）-N,N-二甲基溴化铵（DHDAB）、N-十四烷基-N-（2-羟乙基）-N,N-二甲基溴化铵（THDAB）、N-十六烷基-N-（2-羟乙基）-N,N-二甲基溴化铵（CHDAB）。采用荧光光谱法、紫外-可见光谱法、动态光散射法和等温滴定量热法对三种表面活性剂与牛血清白蛋白（BSA）的相互作用进行研究。荧光光谱研究表明,三种表面活性剂主要与BSA分子内的色氨酸残基发生相互作用,导致蛋白质的构象发生变化,且表面活性剂烷基链越长,与BSA的相互作用就越强。BSA荧光猝灭的主要原因是静态猝灭,紫外光谱实验同样验证了静态猝灭的存在。等温滴定量热法结果表明低浓度的表面活性剂与BSA主要发生静电作用和疏水作用而放热。动态光散射结果表明高浓度的表面活性剂会使BSA结构被破坏。本文揭示了表面活性剂与BSA相互作用的机理,为表面活性剂的广泛应用提供了理论基础。     

二代螺环树形化合物1,2,3,4,5,6,7,8,9,10,11,12-十二氢-2,2;6,6;10,10-三[3,3-二(烷氧羰基)-1,1-环亚丁基二甲氧基]三亚苯基的合成

以1,4-环己二酮、丙二酸二乙酯及多元醇等为原料, 经过两次“一锅煮”法合成了六种二代螺环树形化合物1,2,3,4,5,6,7,8,9,10,11,12-十二氢-2,2;6,6;10,10-三[3,3-二(烷氧羰基)-1,1-环亚丁基二甲氧基]三亚苯基螺环树形化合物, 其中烷氧基为异戊氧基、三羟甲基甲氧基、2,2-二溴甲基-3-羟丙氧基、2,2-二羟甲基丙氧基、二羟甲基膦甲氧基和(N-羟甲基-N-二羟甲基氨基乙基)甲氧基. 利用IR, NMR, MS和元素分析对合成的化合物进行了结构认证, 对影响反应的因素进行了讨论.     

氧杂含氟表面活性剂水溶液的物理化学性能的研究

关于含氟表面活性剂的表面性能的研究已有些报道^[1~4],但对于同系列氧杂含氟表面活性剂的研究则很少.我们以一系列氧杂全氟酰氟1为原料,使与N,N-二乙基丙二胺作用,制得一系列含氟酰胺基胺2.     

新颖有机催化剂的合成及催化不对称直接Aldol反应研究

以N-苄氧羰基-(S)-脯氨酸和5-(1-氨基烷基)四氮唑(烷基: 甲基、乙基、2-苯基乙基)为原料, 经两步反应合成了3个新颖的有机催化剂: (S)-5-脯氨酰胺基甲基四氮唑(3a), (S,S)-5-(1-脯氨酰胺基乙基)四氮唑(3b)和(S,S)-5-(1-脯氨酰胺 基-2-苯基乙基)四氮唑(3c), 并首次将其用于催化丙酮和含吸电子基芳香醛的不对称直接aldol反应. 在室温条件下, 催化剂3b表现出较好的催化活性, 产物的ee值最高可达96%.     

油基-金纳米流体的制备及热稳定性

分别采用N-十六烷基-N-(羟乙基)-N,N-二甲基溴化铵(CHDAB)和丁烷-1,4-二(N-十六烷基-N,N-二甲基溴化铵)(G16-4-16)2种阳离子表面活性剂作为金属表面修饰剂, 在石油醚/正丁醇/水混合体系中用KBH₄ 还原HAuCl₄制备出亲油性纳米金. 其中, 双子表面活性剂G16-4-16显示出更好的包裹分散作用, 其包裹的纳米金粒径分布范围较窄, 平均粒径为5.2 nm. 将该纳米金颗粒分散在液态烷烃、 甲苯和长链烷基醇等溶剂中可制成稳定的油基纳米流体. 采用紫外-可见光谱法跟踪热稳定性随时间的变化, 结果表明, 该纳米流体显示了较好的热稳定性, 在130 ℃稳定时间达20 h. 采用点热源法测定了该纳米流体的导热系数, 结果表明, 50 ℃时添加质量分数1.5%的纳米金可以使其导热系数增大约17%.     

系列阳离子双子表面活性剂的合成及其表面活性的研究

合成了一系列新型的阳离子双子表面活性剂二溴化-N,N'-二(二甲基烷基)乙二铵(12-2-m', m'＝4, 8, 12, 16), 初步研究了其水溶液的表面活性和电导率性质. 结果表明, 此类表面活性剂的表面活性与所含疏水尾基的碳数密切相关.     

某些官能化手性氮杂环丙烷衍生物的合成及其结构

手性元5-(R)-(1R,2S,5R)-孟氧基-3-溴-2(5H)-呋喃酮(3)与氮亲核试剂伯胺(4), 通过串联的不对称Michael加成/分子内亲核取代反应得到了具有两个新的手性中心的1R,5S-6-烷基-6-氮杂-2R-孟氧基-3-氧杂-4-氧代二环[3,1,0]己烷(5a～5d), 产率41%～51%, e.e.≥98%. 后者经LiAlH₄还原得到N-烷基-2,3-双(羟甲基)氮杂环丙烷(6a～6d), 产率66%～91%. 化合物5和6通过元素分析, IR, ¹H NMR, ¹³C NMR, MS以及X射线晶体分析, 测定了它们的化学结构及立体化学构型. 本文为N-烷基氮杂环丙烷类化合物的合成提供了一种有效途径.     

正负离子表面活性剂/离子液体双水相性质研究

本文把短链离子液体(IL)四氟硼酸1-乙基-3-甲基咪唑鎓[C2mim]BF4引入正负离子表面活性剂十二烷基硫酸钠(SDS)和十二烷基三甲基溴化铵(DTAB)双水相体系(SDS/DTAB/H2O)中,研究了IL对双水相相图及相分离体系性质的影响。结果表明,[C2mim]BF4的阳离子性质是影响阴离子表面活性剂过量区域性质的主要因素,IL通过静电作用、氢键作用等改变体系中聚集体的形貌,最终导致阴离子双水相(ATPSa)的消失。IL的阴离子对阳离子双水相(ATPSc)区域性质起着决定作用;IL的盐效应引起的对表面活性剂混合胶束扩散双电层的压缩作用,不但促进胶团的形成,缩短了形成稳定胶团所需要的时间,加快了双水相的相分离速度,而且也造成了形成ATPSc所需DTAB含量的提高。IL的引入改变了ATPSc上、下相表面活性剂的组成及含量,使富含表面活性剂的上相中阳离子表面活性剂含量更高,进而提高了双水相的萃取性能,其上相对甲基橙的萃取效率可高达96.67%。     

阳离子表面活性剂结构对两相体系长链烯烃氢甲酰化反应的影响

合成了四种季铵盐型阳离子表面活性剂，C16H33N（N2H5）3Br(十六烷基三乙基溴化铵)，C16H33N(CH3)2C12H25Br(十六烷基十二烷基二甲基溴化铵)，C22H45N(CH3)3I(二十二烷基三甲基碘化铵)和C22H45N(CH3)2C16H33Br(二十二烷基十六烷基二甲基溴化铵)，考察其在水-有机两相体系中对Rh-TPPTS催化的长链烯烃氢甲酰化反应的促进作用。结果表明，表面活性剂中疏水长链和阳离子头的变化对催化性能有重要影响，疏水长链的增长和疏水长链数目的增加、小的阳离子头均有利于加快催化反应的速度，而疏水长链对催化活性的影响更为显著。     

Fluorocarbon crowning: Langmuir-Blodgett deposition versus self-assembly at molecularly rough surfaces

Langmuir-Blodgett deposition of a single monolayer of 1,2,4,5-tetrakis[(N-(perfluoroundecanoamidoethyl)-N,N-dimethylammonium)methyl]benzene tetrabromide (1) onto a thin film made from alternating layers of poly(diallydimethylammonium chloride) (PDADMA) and poly(4-styrenesulfonate) (PSS) ions affords a uniform fluorinated surface of low energy. An analogous surface that has been constructed by self-assembly shows the same critical surface tension of 16.5 dyn/cm. A comparison of Zisman plots for these two modified films, in combination with analysis by X-ray photoelectron spectroscopy, indicates that Langmuir-Blodgett deposition produces a higher quality and more densely packed fluorocarbon surface that is very hydrophobic. In sharp contrast, the use of a single-chain analog (i.e., N-(perfluoroundecanoamidoethyl)-N,N,N-trimethylammonium bromide) (2)) affords relatively high energy surfaces by Langmuir-Blodgett deposition and by self-assembly.     

(1)H NMR and viscometric studies on cationic gemini surfactants in presence of aromatic acids and salts

In this paper, we are reporting the influence of addition of aromatic acids (anthranilic and benzoic acid) and their sodium salts on the micellar morphological changes in three cationic gemini surfactant solutions, viz. 5 mM tetramethylene-1,4-bis(N-hexadecyl-N,N-dimethylammonium bromide), 10 mM pentamethylene-1,5-bis(N-hexadecyl-N,N-dimethylammonium bromide), and 10 mM hexamethylene-1,6-bis(N,-hexadecyl-N,N-dimethylammonium bromide). The solubilization site of the counterions (obtained from the additives) near the micellar surface are inferred by 1H NMR. The behavior is explained in the light of binding of counterions to the micelle as well as the nature of the functional group attached to the additive.     

Enantiomer separation by reversed-phase liquid chromatography with novel hydrophobic phases composed of chiral cationic surfactants

This paper describes enantiomer separation using four kinds of chiral stationary phases (CSPs) where quaternary ammonium surfactants containing L-valine diamide moieties into long alkyl chains were bound to silicagel supports by reversed phase liquid chromatography. Our aim was to examine hydrogen bonding association of the chiral moiety in hydrophobic phase brought about by aggregation of the micelle-forming surfactants on the surface. The following CSPs were thus derived from the vinyl-terminated chiral surfactants via hydrosilylation: CSP 1 from N-[3-(10-undecenoyl-L-valylamino)propyl]-N,N,N-trimethylammonium bromide, CSP 2 from N-[6-(10-undecenoyl-L-valylamino)hexyl]-N,N,N-trimethyl-ammonium bromide, CSP 3 from N-[3-(10-undecenoyl-L-valylamino)propyl]-N-octadecanyl-N,N-dimethyl-ammonium bromide and CSP 4 from N-[6-(10-undecenoyl-L-valylamino)hexyl]-N-octadecanyl-N,N-dimethylammonium bromide. The degree of hydrophobicity in the interfacial phase was observed by measuring pyrene fluorescence in aqueous media including an organic modifier. Retention of racemic N-acylleucine isopropyl esters was highest in CSP 4, followed by 3, 2, and 1. Largest alpha values toward enantiomer separation were observed for CSP 4 where the chiral moieties were kept through a hexamethylene unit apart from the polar head groups and to which another long alkyl chain was attached, as compared with those for CSP 4. In CSP 4, the chiral moiety to interact with enantiomeric solutes should be buried into the interfacial phase deeply in more extent than CSP 3. In a similar manner, CSP 2 has more effective for enantiomer separation than CSP 1. The interfacial phase of these CSPs was easily exposed to the bulk phase because of the affinity between the bulk phase and the polar head groups as well as their electrostatic repulsion. However, degree of the enantiomer separation can be controlled by the depth of the chiral moiety in the hydrophobic interfacial phase.     

手性双季铵盐诱导下的硝基甲烷与查尔酮的Michael反应

双季铵盐相转移催化剂具有用量少、催化活性高的特点,比单官能团相转移催化剂的催化性能更为显著。手性季铵盐是进行不对称     

Self-cleaning resins

This paper introduces a fundamentally new concept in adsorbents, whereby the sorption of an aqueous solute by a cross-linked polymer is controlled by a gel to liquid-crystalline phase transition. To demonstrate proof of principle, a bilayer forming surfactant, N,N-dioctadecyl,N,N-dimethylammonium bromide (DODAB) has been immobilized onto a cation exchange resin, Dowex 50WX2, and its thermotropic phase behavior and solute-adsorption properties have been investigated. Examination by a combination of differential scanning calorimetry and X-ray scattering has confirmed the retention of a gel to liquid-crystalline phase transition of the surfactant, occurring between 296 and 318 K. Adsorption measurements that were made for 4-chlorotetrahydropyran, 1,2-dichloroethane, and benzyl alcohol have also confirmed uptake by the resin in the liquid-crystalline phase and release in the gel phase.     

Interpolymer complexes of poly(acrylic acid) with poly(2-hydroxyethyl acrylate) in aqueous solutions

Complexes formed from poly(acrylic acid) and poly(2-hydroxyethyl acrylate) were studied in aqueous solutions by viscometric, turbidimetric, FTIR spectroscopic, and thermogravimetric analysis methods. The formation of interpolymer complexes stabilized by hydrogen bonds was observed. It was found that the compositions of these interpolymer complexes are strongly dependent on the concentration of polymers, the order of mixing the solutions, and the pH. It was demonstrated that the complexation ability of poly(2-hydroxyethyl acrylate) is relatively low compared to other known nonionic water-soluble polymers. However, it can be significantly increased via hydrophobic modification of the poly(acrylic acid) using cetyl pyridinium bromide.     

The practical synthesis of a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246)

The synthetic route for a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246), was established by the coupling of optically active components, the bromohydrin 14 and the amine 24. We now describe the practical synthesis of these two optically active components. Bromohydrin 14 was obtained by the asymmetric borane reduction of the prochiral phenacyl bromide 13 using a catalyst prepared from aluminum triethoxide and a chiral amino alcohol. The other optically active component 24 was prepared from (S)-AMT.     

The aggregation of branched polyethylenimine and cationic surfactants in aqueous systems

The aggregation of binary mixtures of branched polyethylenimine with a molecular mass of 30 000 and cationic surfactants, such as cetyltrimethylammonium bromide, cetyldimethylethylammonium bromide, or cetyldimethyl(2-hydroxyethyl)ammonium bromide, in aqueous solutions is studied. The critical micellization concentrations, as well as the sizes and shapes of aggregates, are determined by conductometry, small-angle neutron scattering, and dynamic light scattering methods. Catalytic activity of cationic surfactant-polyethylenimine compositions in the hydrolysis of tetracoordinated phosphorus acid 4-nitrophenyl esters is studied via spectrophotometry. The influence of spatial characteristics of aggregates on the catalytic activity and selectivity of nanostructured polymeric systems is revealed.     

2-rhodaoxetanes: their formation of oxidation of [RhI(ethene)]+ and their reactivity upon protonation

New cationic, pentacoordinate complexes [(TPA)Rh1(ethene)]+, [1a]+, and [(MeTPA)Rh1(ethene)]+, [1b]+, have been prepared (TPA = N,N,N-tri(2-pyridylmethyl)amine, MeTPA = N-[(6-methyl-2-pyridyl)-methyl]-N,N-di(2-pyridylmethyl)amine). Complex [1a]+ is selectively converted by aqueous HCl to [(TPA)RhIII-(ethyl)Cl]+, [2a]+. The same reaction with [1b]+ results in the [(MeTPA)RhIII-(ethyl)Cl]+ isomers [2b]+ and [2c]+. Treatment of [1a]+ and [1b]+ with aqueous H2O2 results in a selective oxygenation to the unsubstituted 2-rho-da(III)oxetanes (1-oxa-2-rhoda(III)cyclo-butanes) [(TPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3a]+, and [(MeTPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3b]+. The reactivity of 2-rhodaoxetanes [3a]+ and [3b]+ is dominated by the nucleophilic character of their 2-oxyethyl oxygen. Reaction of [3a]+ and [3b]+ with the non-coordinating acid HBAr(f)4 results in the dicationic protonated 2-rhodaoxetanes [(TPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4a]2+, and [(MeTPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4b]2+. These eliminate acetaldehyde at room temperature, probably via a coordinatively unsaturated kappa1-2-hydroxyethyl complex. In acetonitrile, complex [4a]2+ is stabilised as [(TPA)-RhIII(kappa1-2-hydroxyethyl)(MeCN)]2+, [5a]2+, whereas the MeTPA analogue [4b]2+ continues to eliminate acetaldehyde. Reaction of [3a]+ with NH4Cl and Mel results in the coordinatively saturated complexes [(TPA)RhIII(kappa1-2-hydroxyethyl)(Cl)]+, [6a]+, and [(TPA)-RhIII(kappa1-2-methoxyethyl)(I)+, [7a]+, respectively. Reaction of [3a]+ with NH4+ in MeCN results in formation of the dicationic metallacyclic amide [(TPA)-RhIII [kappa2-O,C-2-(acetylamino)ethyl]]2+, [9]2+, via the intermediates [4a]2+, [5a]2+ and the metallacyclic iminoester [(TPA)RhIII[kappa2-N,C-2-(acetimidoyloxy)ethyl]]2+, [8]2+. The observed overall conversion of the [Rh(I)(ethene)] complex [1a]+ to the metallacyclic amide [9]2+ via 2-rhodaoxetane [3a]+, provides a new route for the amidation of a [RhI(ethene)] fragment.