Influence of additives on the clouding behavior of amphiphilic drug solutions

The present work focuses on the clouding phenomenon in an amphiphilic drug [amitriptyline (AMT), which is a tricyclic antidepressant] solution. A 50-mM AMT solution prepared in 10 mM of sodium phosphate (SP) buffer was taken where the cloud point (CP) was found to decrease with increasing pH. The same CP decreasing trend (with pH increase) followed in the presence of a fixed concentration (50 mM) of added salts [NaBr, and tetra-n-butylammonium bromide (TBuAB)]. The addition of increasing amounts of quaternary bromides (tetramethylammonium bromide, tetraethylammonium bromide, tetra-n-propylammonium bromide, TBuAB, and tetra-n-pentylammonium bromide) to 50 mM of AMT solution (prepared in 10 mM of SP buffer) caused continuous increase in CP, which was found to be dependent upon the alkyl chain length of that particular salt. The similar type of CP increase was also observed in the presence of conventional (cetyltrimethylammonium bromide and tetradecyltrimethylammonium bromide) and gemini surfactants [bis(hexadecyldimethylammonium)hexane, bis(hexadecyldimethylammonium)pentane, and bis(hexadecyldimethylammonium)butane]. The overall behavior was discussed in terms of electrostatic interactions, micellar growth, and mixed micelle formation.     

有机磷化合物的研究 X:五价膦(磷)酸酯与卤代烷在卤化钠存在下的酯烷基交换反应

A detailed study on the ester alkyl exchange reaction of various types of quinique-valent phosphorus esters with alkyl halide in the presence of sodium bromides was reported. This ester alkyl exchange reaction was evidently influenced by the structure of phosphorus esters and alkyl halides as well as by the nature of the halides of metal ions. In contrast with the reaction without sodium hadlide, the alkyl phosphinmate is more reactive than phosphonate and phosphate by treatment with alkyl halide in the presence of sodium halide. This is consistent with the high nucleophilicity of >P(CO)O- as leaving group. The reactivity of butyl halides was decreased in the following order: n-BuBr>i-BuBr=s-BuBr>t-BuBr. Alkyl iodide was proved to be more reactive than the corresponding bromide and chloride. However, the use of iodioe is limited by the formation of alkene resulted from the elimination of HI. These structural effects show the general characteristics of a nucleophilic substitution reaction. A reaction mechanism involving the formation of sodium salt intermecutiate was proposed based on the concept of HSAB principle. This reaction may, however, be used as a convenient method for the preparation of mixed esters of quinque-valent phosphorus acids.     

Palladium(0)‐Catalyzed Iminohalogenation of Alkenes: Synthesis of 2‐Halomethyl Dihydropyrroles and Mechanistic Insights into the Alkyl Halide Bond Formation

Although the advances on carbon halide reductive elimination have been made, the alkyl bromide and chloride analogues remain a challenge. Here, a palladium(0)‐catalyzed iminohalogenation of γ,δ‐unsaturated oxime esters is described, and the use of electron‐poor phosphine ligands proved to be crucial to promoting alkyl bromide and chloride reductive elimination. Furthermore, S_N2‐type alkyl bromide and chloride reductive elimination has also been established.     

Palladium-catalyzed borylation of primary alkyl bromides

A mild Pd-catalyzed process for the borylation of alkyl bromides has been developed using bis(pinacolato)diboron as a boron source. This process accommodates the use of a wide range of functional groups on the alkyl bromide substrate. Primary bromides react with complete selectivity in the presence of a secondary bromide. The generality of this approach is demonstrated by its extension to the use of alkyl iodides and alkyl tosylates, as well as borylation reactions employing bis(neopentyl glycolato)diboron as the boron source.     

Molecular Rydberg transitions. Intermediate coupling in simple bromides

An intermediate coupling analysis of the low-energy π → σ Rydberg transitions of hydrogen bromide, cyanogen bromide, acetylene bromide and alkyl bromides is presented. Exchange and spin-orbit coupling parameters are calculated and their variations discussed. The Br 5s orbital is delocalized in the larger alkyl bromides and Br 4p is heavily involved in π bonding in acetylene and cyanogen bromides.     

Cobalt-mediated cross-coupling reactions of primary and secondary alkyl halides with 1-(trimethylsilyl)ethenyl- and 2-trimethylsilylethynylmagnesium reagents

[reaction: see text] This paper describes cobalt-mediated cross-coupling reactions of alkyl halides with 1-(trimethylsilyl)ethenylmagnesium bromide and 2-(trimethylsilyl)ethynylmagnesium bromide, respectively. The cobalt system allows for employing secondary as well as primary alkyl halides as the substrates. The reactions offer facile formations of alkyl-alkenyl and alkyl-alkynyl bonds. The reaction mechanism would include single-electron transfer from a cobalt complex to alkyl halide to generate the corresponding alkyl radical. The cobalt system thus enables sequential radical cyclization/alkenylation and cyclization/alkynylation reactions of 6-halo-1-hexene derivatives.     

Dehalogenation of alkyl halides catalyzed by single-enantiomer complexes of titanium

Racemic alkyl bromides were dehalogenated with a stoichiometric quantity of a main group alkyl metal reductant in the presence of a chiral, single-enantiomer titanium catalyst. The reaction was monitored by chiral gas chromatography of samples from the reaction mixture. The chiral titanium compounds examined proved to be effective catalysts. However, there was no detectable difference in the rate of reduction between the two enantiomers of the alkyl halide. An enantiomerically pure secondary bromide was reduced under the same conditions without racemization during the course of the reaction. This indicates that the secondary alkyl bromide is stereochemically stable to the reaction conditions. Radical probe reactions suggest a radical mechanism.     

Effect of electrolytes on the cloud point of chlorpromazine hydrochloride solutions

Cloud point (CP) phenomenon occurring in amphiphilic drug chlorpromazine hydrochloride (CPZ) solutions with and without salts is reported herein. The CP of a 50mM CPZ solution (prepared in 10mM sodium phosphate, SP, buffer) was found to decrease with increasing pH, both in the absence as well as presence (50mM) of added salts (NaCl, NaBr, LiBr, KBr, tetra-n-butylammonium bromide). Whereas, at a fixed concentration of NaCl, the CP increased with increasing CPZ concentration, addition of increasing amounts of salts (NaF, NaCl, NaBr, LiCl, KCl) to 50mM CPZ solution (at pH 6.7) caused continuous increase in CP. On the basis of these studies the binding-effect orders of counterions and co-ions have been deduced, respectively, as: Br(-)>Cl(-)>F(-) and Li(+)>Na(+)>K(+). The similar trend of increasing CP with addition of increasing amounts of quaternary bromides (tetramethylammonium bromide, TMeAB; tetraethylammonium bromide, TEtAB; tetra-n-propylammonium bromide, TPrAB; tetra-n-butylammonium bromide, TBuAB; tetra-n-pentylammonium bromide, TPeAB) to 50mM CPZ solutions (at pH 6.7) was found to be dependent upon the alkyl chain length of the particular salt. The overall behaviour has been discussed in terms of electrostatic interactions, micellar growth, and mixed micelle formation.     

X-Ray absorption spectroscopy investigation of 1-alkyl-3-methylimidazolium bromide salts

X-ray absorption spectroscopy (XAS) has been used to unveil the bromide ion local coordination structure in 1-alkyl-3-methylimidazolium bromide [C(n)mim]Br ionic liquids (ILs) with different alkyl chains. The XAS spectrum of 1-ethyl-3-methylimidazolium bromide has been found to be different from those of the other members of the series, from the butyl to the decyl derivatives, that have all identical XAS spectra. This result indicates that starting from 1-buthyl-3-methylimidazolium bromide the local molecular arrangement around the bromide anion is the same independently from the length of the alkyl chain, and that the imidazolium head groups in the liquid ILs with long alkyl chains assume locally the same orientation as in the [C(4)mim]Br crystal. With this study we show that the XAS technique is an effective direct tool for unveiling the local structural arrangements around selected atoms in ILs.     

Solvation dynamics in aqueous anionic and cationic micelle solutions: sodium alkyl sulfate and alkyltrimethylammonium bromide

Solvation dynamics of the fluorescence probe, coumarin 102, in anionic surfactant, sodium alkyl sulfate (C(n)H(2n+1)SO(4)Na; n = 8, 10, 12, and 14), and cationic surfactant, alkyltrimethylammonium bromide (C(n)H(2n+1)N(CH(3))(3)Br; n = 10, 12, 14, and 16), micelle solutions have been investigated by a picosecond streak camera system. The solvation dynamics in the time range of 10(-10)-10(-8) s is characterized by a biexponential function. The faster solvation time constants are about 110-160 ps for both anionic and cationic micelle solutions, and the slower solvation time constants for sodium alkyl sulfate and alkyltrimethylammonium bromide micelle solutions are about 1.2-2.6 ns and 450-740 ps, respectively. Both the faster and the slower solvation times become slower with longer alkyl chain surfactant micelles. The alkyl-chain-length dependence of the solvation dynamics in both sodium alkyl sulfate and alkyltrimethylammonium bromide micelles can be attributed to the variation of the micellar surface density of the polar headgroup by the change of the alkyl chain length. The slower solvation time constants of sodium alkyl sulfate micelle solutions are about 3.5 times slower than those of alkyltrimethylammonium bromide micelle solutions for the same alkyl-chain-length surfactants. The interaction energies of the geometry optimized mimic clusters (H(2)O-C(2)H(5)SO(4)(-) and H(2)O-C(2)H(5)N(CH(3))(3)(+)) have been estimated by the density functional theory calculations to understand the interaction strengths between water and alkyl sulfate and alkyltrimethylammonium headgroups. The difference of the slower solvation time constants between sodium alkyl sulfate and alkyltrimethylammonium bromide micelle solutions arises likely from their different specific interactions.     

Reductive Chlorination and Bromination of Ketones via Trityl Hydrazones

A method is presented for the direct transformation of a ketone to the corresponding reduced alkyl chloride or bromide. The process involves the reaction of a ketone trityl hydrazone with tBuOCl to give a diazene which readily collapses to the α‐chlorocarbinyl radical, reduction of which by a hydrogen atom source gives the alkyl chloride product. The use of N‐bromosuccinimide provides the corresponding alkyl bromide. This unique transformation provides a reductive halogenation that complements Barton's redox‐neutral vinyl halide synthesis.     

New synthetic strategies and disconnections in the synthesis of liquid crystals enabled by photoredox cross-coupling reactions

In this letter we describe the application of metallaphotoredox cross-electrophile couplings to the synthesis of liquid crystals using dual nickel and iridium catalysis. Given the proliferation of aryl and alkyl bromides in liquid crystal research we consider that the silyl-radical mediated cross-coupling of alkyl bromide with an aryl bromide (to afford a direct alkyl–aryl bond) will become an extremely powerful tool in the synthesis of liquid crystalline materials, and we use this to synthesise several well-known materials (PCH32, 5CB, CB7CB and CB15) in a single synthetic step from inexpensive and commercially available building blocks. The metallaphotoredox decarboxylative sp³–sp² cross-coupling of an aryl bromide with an alkyl carboxylic acid provides a complimentary method to form alkyl–aryl bonds, and we use this to successfully prepare trans PCH5 in a single synthetic step from commercially available building blocks. We also prepare novel methylene-linked materials in a single synthetic step, one of which exhibit the topical TB phase.     

辅酶B12模型化合物生成与解离电化学研究(II)

用电化学方法研究了钴卟啉与多种直链溴代烷的相互作用，表明１价钴卟啉可以与溴代烷形成有σ钴－碳键的辅酶Ｂ１２模型化合物。计算了Ｉ价钴卟啉与各种直链溴代烷的加合速率常数。详细讨论了直链烷烃的链长与模型化合物生成速率及烷基钴卟啉负离子稳定性的关系。讨论了几种模型化合物的优劣。     

Reductive activation of arenes: XIX. Mechanism and some synthetic applications of the alkylation of phthalodinitrile radical anion

Using cyclopropylmethyl bromide as mechanism-sensitive reagent, it was shown that the reaction of phthalonitrile radical anion with alkyl halides in liquid ammonia involves electron transfer. The effects of the nature of alkyl bromide and counterion in the radical anion salt and reaction conditions on the ratio of 2-alkyl-benzonitrile, 4-alkylphthalonitrile, and 2,5-dialkylbenzonitrile were studied. Phthalodinitrile radical anion was found to undergo dimerization with formation of biphenyl-2,3′,4′-tricarbonitrile. The examined transformations may underlie syntheses of phthalonitriles modified at the 4-position.     

Determination of trace quaternary ammonium surfactants in water by combining solid-phase extraction with surface-assisted laser desorption/ionization mass spectrometry.

This study demonstrates the feasibility of combining solid-phase extraction (SPE) with surface-assisted laser desorption/ionization (SALDI) mass spectrometry to determine trace quaternary ammonium surfactants in water. The trace surfactants in water were directly concentrated on the surface of activated carbon sorbent in SPE. The activated carbon sorbent was then mixed with the SALDI liquid for SALDI analysis. No SPE elution procedure was necessary. Experimental results indicate that the surfactants with longer chain alkyl groups exhibit higher sensitivities than those with shorter chain alkyl groups in SPE-SALDI analysis. The detection limit for hexadecyltrimethylammonium bromide is around 10 ppt in SPE-SALDI analysis by sampling 100 mL of aqueous solution, while that of tetradecyltrimethylammonium bromide is about 100 ppt. The detection limit for decyltrimethylammonium bromide and dodecyltrimethylammonium bromide is in the low-ppb range.     

Tetraalkylammonium bromides in methanol: Small angle neutron scattering and vapor pressure measurements

Vapor pressure measurements and small angle scattering (SANS) experiments are reported and discussed for bispiperidinium (BP) bromide and n-tetrapentylammonium bromide solutions in methanol at 25°C. The BP⁺ ion which may be considered as a tetraalkylammonium (TAA) ion with pairwise connected alkyl chains, is used for the study of the effects due to flexible TAA alkyl chains. SANS intensities are calibrated with the help of the precise osmotic coefficients from the vapor pressure measurements.     

Fabrication of positively charged catanionic vesicles from ion pair amphiphile with double-chained cationic surfactant

In this study, a pseudodouble-chained ion pair amphiphile, hexadecyltrimethylammonium-dodecylsulfate (HTMA-DS), was prepared from a mixture of cationic surfactant, hexadecyltrimethylammonium bromide, and anionic surfactant, sodium dodecylsulfate. Positively charged catanionic vesicles were then successfully fabricated from HTMA-DS with the addition of cationic surfactants, dialkyldimethylammonium bromide (DXDAB), including ditetradecyldimethylammonium bromide (DTDAB), dihexadecyldimethylammonium bromide, and dioctadecyldimethylammonium bromide (DODAB), with a mechanical disruption approach. The control of charge characteristic and physical stability of the catanionic vesicles through the variations of DXDAB molar fraction and alkyl chain length was then explored by size, zeta potential, and Fourier transform infrared analyses. It was found that the molecular packing and/or molecular interaction of HTMA-DS with DXDAB rather than the electrostatic repulsion between the charged vesicles dominated the physical stability of the mixed HTMA-DS/DXDAB vesicles. The presence of DTDAB, which possesses short alkyl chains, could adjust the packing of the unmatched chains of HTMA⁺ and DS^? and promote the vesicle formation. However, the weak molecular interaction due to the short chains of DTDA⁺ could not maintain the vesicle structures in long-term storage. With increasing the alkyl chain length of DXDAB, it was possible to improve the vesicle physical stability through the enhanced molecular interaction in the vesicular bilayer. However, the long alkyl chains of DODAB unmatched with those of HTMA-DS, resulting in the vesicle disintegration in long-term storage. For the formation of stable charged catanionic vesicles of HTMA-DS/DXDAB, a good match in hydrophobic chains and strong molecular interaction were preferred for the vesicle-forming molecules.     

Rapid Synthesis of Alkoxyamine Hydrochloride Derivatives from Alkyl Bromide and N,N′-Di-tert-butoxycarbonylhydroxylamine [(Boc)2NOH]

The conventional route to alkoxyamine hydrochloride derivatives is by reaction of alkyl bromides with N-hydroxyphthalimide or N-hydroxysuccinimide followed by addition of hydrazine and HCl. Transformation of an alkyl bromide to the corresponding alkoxyamine hydrochloride can be accomplished more rapidly in good yields without using hazardous hydrazine by reaction of (Boc)₂NOH (N,N′-di-tert-butoxycarbonylhydroxylamine) and alkyl bromide followed by addition of HCl. Alkoxyamine hydrochlorides are powerful reagents in organic synthesis that can be used to synthesize alkoxyimino derivatives after condensation with a ketone or aldehyde.     

Decarboxylation of 6-nitrobenzisoxazole-3-carboxylate in aqueous cationic micelles: kinetic evidence of microinterface property changes

We studied decarboxylation of 6-nitrobenzisoxazole-3-carboxylate, 1, as a kinetic probe to investigate microinterface properties of aqueous micelles formed by cationic surfactants of increasing head group bulk, i.e., cetyltrialkylammonium bromide, with alkyl=Me (CTABr), Et (CTEABr), n-Pr (CTPABr), n-Bu (CTBABr) and p-octyloxybenzyltrialkylammonium bromide surfactants with alkyl=Me (pOOTABr), n-Pr (pOOTPABr), and n-Bu (pOOTBABr), and the longer p-dodecyloxybenzyltrimethylammonium bromide (pDoTABr) at concentrations higher than 0.05 M. The pseudophase kinetic treatment fails to fit the data that show anomalies with abrupt increases in k(obs) for CTPABr and CTBABr (but not for CTEABr) and with smooth and continuos increase of k(obs) for all p-alkyloxybenzyltrilakylammonium bromides. Abrupt and successive modifications of the micellar interface properties, undergoing only when the polar head or the alkyl chain have some covalent structure, account for the observed kinetic behavior.     

Motilides, macrolides with gastrointestinal motor stimulating activity. II. Quaternary N-substituted derivatives of 8,9-anhydroerythromycin A 6,9-hemiacetal and 9,9-dihydroerythromycin A 6,9-epoxide

A series of quaternary ammonium derivatives of 8,9-anhydroerythromycin A 6,9-hemiacetal (1) and 9,9-dihydroerythromycin A 6,9-epoxide (2) has been prepared and tested for antimicrobial activity and gastrointestinal motor stimulating (GMS) activity in the dog (in vivo). The GMS activity is enhanced markedly when small alkyl halides and unsaturated alkyl halides such as allyl bromide and propargyl bromide are added to the dimethylamino group of 1. Among them, N-propargyl-8,9-anhydroerythromycin A 6,9-hemiacetal bromide (3) exhibits GMS activity 2890 times stronger than that of erythromycin A and is completely devoid of antimicrobial activity. The potency of 3 is comparable to that of synthetic motilin both in vitro and in vivo.