Synthesis of N-aryl-3-(arylimino)-3H-indol-2-amines via hypervalent iodine promoted oxidative diamination of indoles

A direct and fast oxidative diamination of substituted indoles with anilines was realized by using 1-fluoro-1,2-benziodoxol-3(1H)-one under mild conditions. This protocol could provide a wide range of synthetically valuable N-aryl-3-(arylimino)-3H-indol-2-amine derivatives under peroxide-free conditions within 30?min in up to 91% yields.     

An efficient synthesis of (−)-3-deazaaristeromycin

The coupling reaction of 4-chloro-1H-imidazo[4,5-c]pyridine (6-chloro-3-deazapurine) and (3aS,4S,6R,6aR)-tetrahydro-2,2-dimethyl-6-vinyl-3aH-cyclopenta-[d][1,3]dioxo-4-ol under Mitsunobu reaction conditions provides, after three subsequent straightforward reactions, ready access to the highly biologically active (−)-3-deazaaristeromycin. The versatility of this procedure opens access to a diverse pool of 3-deazapurine carbocyclic nucleosides.     

The Mitsunobu reaction in preparing 3-deazapurine carbocyclic nucleosides

The coupling reaction of 4-chloro-1H-imidazo[4,5-c]pyridine (6-chloro-3-deazapurine, 3) with several cyclopentyl derivatives under Mitsunubo reaction conditions provides an efficient entry into N-7 and N-9 substituted 3-deazapurine carbocyclic nucleosides of antiviral potential. The versatility of this procedure is illustrated with a new and efficient synthesis of (−)-3-deazaaristeromycin, a formal preparation of 3-deazaneplanocin A, and a route to 3-deaza-5′-homoaristeromycin.     

3-O-Acyl triggered tandem Lewis acid catalyzed intramolecular cyclization of diacetone glucose derivatives to 5-O-acyl-3,6-anhydro-d-glucose

BF₃ mediated one-pot conversion of 3-O-acyl-d-glucose-1,2:5,6-diacetonide derivatives to 5-O-acyl-3,6-anhydro-d-glucose is described through a tandem selective intramolecular cyclization sequence.     

Regioselective oxidation of N-alkylpyrrolidines to pyrrolidin-5-ones by RuCl3/NaIO4

RuCl₃/NaIO₄ under EtOAc/H₂O biphasic conditions, selectively oxidizes the Nα-endo-methylene group of pyrrolidine derivatives, without affecting the exo-methylene group adjacent to the N-heteroatom.     

2-Pivalamido-3H-pyrimidin-4-one derivatives: convenient pivalamide hydrolysis using Fe(NO3)3 in MeOH

A simple methodology for pivalamide (trimethylacetamide, pivaloylamino) hydrolysis has been discovered using Fe(NO₃)₃ in MeOH at room temperature. The pivalamido group of 2-pivalamido-3H-pyrimidin-4-ones or fused 2-pivalamido-3H-pyrimidin-4-ones such as 2-pivalamido-3H-quinazolin-4-ones and 2-pivalamido-3H-pteridines have been hydrolysed under these conditions to afford the corresponding amine.     

Bi2O3-catalyzed oxidation of aldehydes with t-BuOOH

A variety of aromatic, aliphatic and conjugated aldehydes were transformed to the corresponding carboxylic acids with 70% t-BuOOH solution (water) in the presence of catalytic amounts of Bi₂O₃. This method possesses a wide range of capabilities, does not involve cumbersome work-up, exhibits chemoselectivity and proceeds under mild conditions. The resulting products are obtained in good yields within reasonable time. The overall method is green.     

TaBr5-catalyzed Biginelli reaction: one-pot synthesis of 3,4-dihydropyrimidin-2-(1H)-ones/thiones under solvent-free conditions

An efficient TaBr₅ (5-10 mol %)-catalyzed Biginelli reaction under solvent-free conditions for one-pot syntheses of 3,4-dihydropyrimidin-2-(1H)-ones (DHPMs) and their thione analogs is reported. The catalyst is stable at room temperature and employed under mild and environmentally friendly conditions.     

Facile N-tert-butoxycarbonylation of amines using La(NO3)3·6H2O as a mild and efficient catalyst under solvent-free conditions

Facile N-tert-butoxycarbonylation of amines is described by the treatment of various primary, secondary, benzylic and aryl amines with di-tert-butyl dicarbonate in the presence of catalytic amounts of La(NO₃)₃·6H₂O under solvent-free conditions at room temperature to afford N-tert-butylcarbamates in excellent yields.     

BF3·SiO2: an efficient alternative for the synthesis of 14-aryl or alkyl-14H-dibenzo[a,j]xanthenes

Silica-supported boron trifluoride (BF₃·SiO₂) is an efficient, readily available, and reusable catalyst for the synthesis of 14-aryl or alkyl-14H-dibenzo[a,j]xanthenes by condensation of 2-naphthol and aldehydes. This reaction under heating or sonication conditions is very simple, affording good to excellent yields of products.     

Chemical stability of La1−xSrxCrO3 in oxidizing atmospheres

The single-phase region of La_1−xSr_xCrO₃ (x=0.1, 0.2, 0.3) was precisely determined as a function of temperature, P_O2 and Sr content. The powders with the nominal composition of La_1−xSr_xCrO₃ were equilibrated under various conditions, and then identified by XRD analyses. To confirm the equilibration, two independent experiments were performed for each composition observing (i) the precipitation of the second phase from a single-phase solid solution, and (ii) the formation of the single phase from the constituent oxides. Two kinds of second phases, SrCrO₄ and an unknown phase, were observed depending on the conditions. The second phases tended to appear at low temperature, in high P_O2 and with a large Sr content. The single-phase regions obtained via the two equilibration routes were in good agreement with each other. The thermodynamic calculations on the supposition of ideality of the solid solution essentially reproduced the experimental results. When this material is used as the interconnects of solid oxide fuel cells, much attention should be paid to its relatively narrow solubility range of Sr; for example, the solubility limit is approximately 0.1 under a typical cathode-side condition (1273 K, air).     

Interactions of Ba2YCu3O6+y with the Gd3NbO7 buffer layer in coated conductors

A systematic study of the chemical interaction of Ba₂YCu₃O_6+y and Gd₃NbO₇ was conducted under two processing conditions: purified air (21% p_o2), and 100 Pa p_o2 (0.1% p_o2). Phases present along the pseudo-binary join Ba₂YCu₃O_6z and Gd₃NbO₇ were found to be in two five-phase volumes within the system. Three common phases that are present in all samples are (Y,Gd)₂Cu₂O₅, Ba(Y,Gd)₂CuO₅ and Cu₂O or CuO (depending on the processing conditions). The assemblies of phases can be categorized in three regions, with Ba₂YCu₃O_6+y: Gd₃NbO₇ ratios of (I)<5.5:4.5; (II)=5.5:4.5; and (III)>5.5:4.5. The lowest melting temperature of the system was determined to be ≈938 °C in air, and 850 °C at 100 Pa p_o2. Structure determinations of two selected phases, Ba₂(Gd_xY_1−x)NbO₆ (Fm3¯m, No. 225), and (Gd_xY_3−x)NbO₇ (C222₁, No. 20 and Ccmm, No. 63), were completed using the X-ray Rietveld refinement technique. Reference X-ray powder diffraction patterns for selected phases of Ba₂(Gd_xY_1−x)NbO₆ (x=0.2, 0.4, 0.6, and 0.8) and (Gd_xY_3−x)NbO₇ (x=0.6, 1.2, 1.8, 2.4 and 3) have been prepared for inclusion in the Powder Diffraction File (PDF).     

Investigation of the quasi-ternary system LaMnO3-LaCoO3-“LaCuO3”—I: the series La(Mn0.5Co0.5)1−xCuxO3−δ

The La(Mn_0.5Co_0.5)_1−xCu_xO_3−δ series with x=0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1 was synthesized by the Pechini method to obtain insight into the phase formation in the quasi-ternary LaMnO₃-LaCoO₃-“LaCuO₃” system caused by the instability of LaCuO₃ under ambient conditions. After sintering at 1100°C some remarkable results were obtained: LaMn_0.3Co_0.3Cu_0.4O_3−δ crystallized as a single phase in the orthorhombic perovskite structure typical of LaCuO₃. Among the synthesized compositions this compound showed the highest electrical conductivity in air at 800°C (155 S cm⁻¹) and also the highest thermal expansion coefficient (α_30−800°C=15.4×10⁻⁶ K⁻¹). The LaCuO_3−δ composition also crystallized as a single phase but in a monoclinic structure although previous investigations have shown that other phases are preferably formed after sintering at 1100°C. The electrical conductivity and thermal expansion coefficient were the lowest within the series of compositions, i.e. 9.4 S cm⁻¹ and 11.9×10⁻⁶ K⁻¹, respectively.     

Synthetic studies related to diketopyrrolopyrrole (DPP) pigments. Part 3: Syntheses of tri- and tetra-aryl DPPs

Novel synthetic methodologies leading towards 2,3,5-triaryl- and 2,3,5,6-tetraaryl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-diones (tri- and tetra-aryl-DPPs) and their derivatives have been investigated. Direct arylation of 3,6-diphenyl-DPP was possible using 1-fluoro-2,4-dinitrobenzene. Acylation of ethyl 2-aryl-4,5-dihydro-5-oxopyrrole-3-carboxylates with N-arylbenzimidoyl chlorides in the presence of a strong base gives the novel 2,3,6-triaryl-DPPs together with the corresponding uncyclised enamines. A new and simple method for the synthesis of ethyl 1,2-diaryl-4,5-dihydro-5-oxopyrrole-3-carboxylates has led to an alternative route to triaryl-DPPs via reaction with benzonitrile under basic conditions, and combination of this with the benzimidoyl chloride methodology has enabled the synthesis of variously substituted 2,3,5,6-tetraphenyl-DPPs.     

Alumina supported-CeCl3·7H2O-NaI: an efficient catalyst for the cyclization of 2′-aminochalcones to the corresponding 2-aryl-2,3-dihydroquinolin-4(1H)-ones under solvent free conditions

We recently advanced silica gel supported-TaBr₅ as an efficient catalyst for the isomerization of 2′-aminochalcones to the corresponding 2-aryl-2,3-dihydroquinolin-4(1H)-ones under solvent free conditions (Tetrahedron Lett. 2006, 47, 2725-2729). This conversion can be further improved through the use of more economic alumina supported-CeCl₃·7H₂O-NaI, providing high yields of up to 98% at lower reaction temperatures. This stable catalyst is easily prepared, active under solvent-free conditions and employed under environmentally friendly conditions.     

Facile oxygenation of organic sulfides with H2O2 catalyzed by Mn-Me3TACN compounds

Two binuclear Mn-Me₃TACN (Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane) compounds catalyze the oxygenation of organic sulfides utilizing H₂O₂ under ambient conditions. Both phenyl sulfide and ethyl phenyl sulfide were converted to the corresponding sulfones and chloroethyl phenyl sulfide proceeds to its elimination product of phenyl vinyl sulfone.     

A novel stereoselective synthesis of (E)-2-arylvinylphosphonates in InCl3-NaBH4-MeCN system

Hydroindation of arylalkynylphosphonates gives a intermediate which can be hydrolyzed to (E)-2-arylvinylphosphonates in InCl₃-NaBH₄-MeCN system, the stereoselectivity and yield are rather high, but under the same conditions 2-alkylalkynylphosphonates do not react very well.     

Photoluminescence properties of a novel phosphor, Na3La9O3(BO3)8:RE(RE=Eu,Tb)

The new oxyborate phosphors, Na₃La₉O₃(BO₃)₈:Eu³⁺ (NLBO:Eu) and Na₃La₉O₃(BO₃)₈:Tb³⁺ (NLBO:Tb) were prepared by solid-state reactions. The photoluminescence characteristics under UV excitation were investigated. The dominated emission of Eu³⁺ corresponding to the electric dipole transition ⁵D₀→⁷F₂ is located at 613 nm and bright green luminescence of NLBO:Tb attributed to the transition ⁵D₄→⁷F₅ is centered at 544 nm. The concentration dependence of the emission intensity showed that the optimum doping concentration of Eu and Tb is 30% and 10%, respectively.     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.