Activation of silylphosphines by diethyl azodicarboxylate: novel silylation of alcohols

A novel activation mode of silylphosphines and an application of that to silylation of alcohols were described. Silylphosphines were found to be instantly activated by means of DEAD and PPTS to form reactive silyl cation equivalents. By using the activated species, silylation of alcohols successfully proceeded under mild acidic condition.     

Synthesis of unsaturated silyl nitronates via the silylation of conjugated nitroalkenes

A new method for the synthesis of conjugated silyl nitronates from nitroalkenes is described. The procedure has wide substrate scope and is compatible with in situ generation of the substrates from 2-nitroalcohols or 2-chloro-nitroalkanes. A cascade transformation to give 3,4,5,6-tetrahydropyridine N-oxide derivatives was disclosed.     

Synthesis of 6-alkylidene-2,3-benzo-1,4-diaza-7-oxabicyclo[4.3.0]non-2-enes by cyclization of 1,3-bis(silyl enol ethers) with quinoxalines

6-Alkylidene-2,3-benzo-1,4-diaza-7-oxabicyclo[4.3.0]non-2-enes were prepared by cyclization of 1,3-bis(silyl enol ethers) with quinoxaline.     

Chemoselectivity in the Kosugi-Migita-Stille coupling of bromophenyl triflates and bromo-nitrophenyl triflates with (ethenyl)tributyltin

Kosugi-Migita-Stille cross coupling reactions of (ethenyl)tributyltin with all isomeric permutations of bromophenyl triflate and bromo-nitrophenyl triflate were examined in order to determine the chemoselectivity of carbon-bromine versus carbon-triflate bond coupling under different reaction conditions. In general, highly selective carbon-bromine bond cross couplings were observed using for example bis(triphenylphosphine)palladium dichloride (2?mol-%) in 1,4-dioxane at reflux. In contrast, reactions using the same pre-catalyst but in the presence of a three-fold excess of lithium chloride in N,N-dimethylformamide at ambient temperature were in most cases selective for coupling at the carbon-triflate bond. Overall, isolated yields and the selectivity for carbon-bromine bond coupling were significantly higher compared to carbon-triflate bond coupling.     

Intramolecular iminium ene reaction with Cu(I) catalysts: facile formation of 4-amino-3-methylenechromans from O-propargyl salicylaldehydes and dialkylamines

Reaction of O-propargyl salicylaldehyde and related compounds with dialkylamines in the presence of copper(I) iodide gave 4-(alkylamino)-3-methylenechroman derivatives in good yields through the loss of one alkyl group of the dialkylamine. The reaction also worked well by employing 2-amino benzaldehyde derivatives to afford 4-(alkylamino)-3-methylene-1,2,3,4-tetrahydroquinolines. A deuterium-labeling experiment suggested that the α-hydrogen of the dialkylamine was transferred intramolecularly into the terminal methylene. This result indicated the reaction mechanism, which involved the formation of iminium ion between the aldehyde and the dialkylamine followed by ene-type C-C bond formation with inverse electron demand and hydrolysis.     

Reaction of iodoarenes with potassium peroxodisulfate/trifluoroacetic acid in the presence of aromatics. Direct preparation of diaryliodonium triflates from iodoarenes

Diaryliodonium triflates have been directly prepared by reaction of some iodoarenes with aromatic substrates in good yields by using K₂S₂O₈/CF₃COOH/CH₂Cl₂. Treatment of a variety of iodoarenes with iodobenzene under the same conditions resulted in ligand transfer, and (4-iodophenyl)(phenyl)iodonium triflate was obtained. This procedure avoids the use of high temperature and severe reaction conditions.     

Synthesis of 7-hydroxy-2-(2-hydroxybenzoyl)benzo[c]chromen-6-ones by sequential application of domino reactions of 1,3-bis(silyl enol ethers) with benzopyrylium triflates

The domino, Michael-retro-Michael-aldol, reaction of 2,4-bis(trimethylsilyloxy)penta-1,3-diene with 3-formylchromones afforded 4-(2-hydroxybenzoyl)-2-acetylphenols, which were transformed into 6-(2-hydroxybenzoyl)chromones. The Me₃SiOTf-mediated condensation of the latter with 1,3-bis(silyl enol ethers) and subsequent domino ‘retro-Michael-aldol-lactonization’ reaction afforded 7-hydroxy-2-(2-hydroxybenzoyl)benzo[c]chromen-6-ones.     

Structures of the Reactive Intermediates in Organocatalysis with Diarylprolinol Ethers

Structures of the reactive intermediates (enamines and iminium ions) of organocatalysis with diarylprolinol derivatives have been determined. To this end, diarylprolinol methyl and silyl ethers, 1 , and aldehydes, Ph? CH₂? CHO, ^tBu? CH₂? CHO, Ph? CH=CH? CHO, are condensed to the corresponding enamines, A and 3 (Scheme 2), and cinnamoylidene iminium salts, B and 4 (Scheme 3). These are isolated and fully characterized by melting/decomposition points, [α]_D, elemental analysis, IR and NMR spectroscopy, and high‐resolution mass spectrometry (HR‐MS). Salts with BF₄, PF₆, SbF₆, and the weakly coordinating Al[OC(CF₃)₃]₄ anion were prepared. X‐Ray crystal structures of an enamine and of six iminium salts have been obtained and are described herein (Figs. 2 and 4–8, and Tables 2 and 7) and in a previous preliminary communication (Helv. Chim. Acta 2008 , 91, 1999). According to the NMR spectra (in CDCl₃, (D₆)DMSO, (D₆)acetone, or CD₃OD; Table 1), the major isomers 4 of the iminium salts have (E)‐configuration of the exocyclic N?C(1′) bond, but there are up to 11% of the (Z)‐isomer present in these solutions (Fig. 1). In all crystal structures, the iminium ions have (E)‐configuration, and the conformation around the exocyclic N‐C? C‐O bond is synclinal‐exo (cf. C and L ), with one of the phenyl groups over the pyrrolidine ring, and the RO group over the π‐system. One of the meta‐substituents (Me in 4b , CF₃ in 4c and 4e ) on a 3,5‐disubstituted phenyl group is also located in the space above the π‐system. DFT Calculations at various levels of theory (Tables 3–6) confirm that the experimentally determined structures (cf. Fig. 10) are by far (up to 8.3 kcal/mol) the most stable ones. Implications of the results with respect to the mechanism of organocatalysis by diarylprolinol derivatives are discussed.     

Fluoride-induced coupling of perfluoroketene dithioacetals with silyl alkynes: A way towards new polyfunctionalized trifluoromethyl building blocks

Under fluoride activation, the vinyl fluorine of perfluoroketene dithioacetal may be substituted by silylated nucleophiles. Using silyl alkynes, a formal transition metal free sila-Sonogashira cross-coupling reaction occurred. The resulting enynes were hydrolyzed giving new polyfunctional trifluoromethyl building blocks.     

Lanthanum trichloride: An efficient catalyst for the silylation of hydroxyl groups by activating hexamethyldisilazane (HMDS)

A variety of hydroxy functional groups was protected as their corresponding trimethylsilyl ethers using HMDS in the presence of lanthanum trichloride. The catalyst LaCl₃ activates the HMDS and accelerates the reaction under mild reaction conditions at room temperature to afford the corresponding silylated products in excellent yields.     

Stereoelectronic control in the solvolysis of spiroepoxidic 1-norbornyl triflates: unexpected reactivity in 3-bromomethyl derivatives

Interesting norbornane-fused tetrahydrofurans, with an additional synthetically-valuable vicinal dioxy-substitution in the norbornane skeleton, are enantiospecifically obtained in high yield from epimeric camphor-derived 3-endo-bromomethyl-substituted spiroepoxidic 1-norbornyl triflates. The process takes place via a domino reaction stereoelectronically controlled by the bromine atom. The described process has synthetic value, since it opens the way for a future enantiospecific preparation of 2,3-disubstituted tetrahydrofurans from camphor.     

Diphenylphosphinite ionic liquid (IL-OPPh2): A solvent and ligand for palladium-catalyzed silylation and dehalogenation reaction of aryl halides with triethylsilane

The use of an imidazolium-based phosphinite ionic liquid (IL-OPPh₂) as both solvent and ligand for Pd offers an efficient catalytic system for silylation of aryl iodides, bromides and also chlorides by triethylsilane in the presence of Cs₂CO₃. In the absence of base, this system is also performed for catalytic dehalogenation of aryl halides. The ionic liquid containing its corresponding Pd(0) complex can be easily recovered and reused in several runs without losing its efficiency.     

Synthesis of 1,4-benzothiazin-2-yl derivatives of 1,3-dicarbonyl compounds and benzothiazinone spiro derivatives by the reaction of 2-chloro-1,4-benzothiazin-3-ones with ‘push-pull’ enamines

The reaction of 2-chloro-3-oxo-3,4-dihydro-2H-1,4-benzothiazines with ‘push-pull’ enamines was investigated. The reaction with the enamines occurs at the β-carbon atom in the presence of a small excess of triethylamine. As a result, a set of 3-oxo-3,4-dihydro-2H-1,4-benzothiazin-2-yl derivatives of 1,3-dicarbonyl compounds and benzothiazinone spiro derivatives was prepared. On acidic hydrolysis of ethyl 2-ethyl-3-(methylimino)-2-(3-oxo-3,4-dihydro-2H-1,4-benzothiazin-2-yl)butanoate, a new rearrangement affording ethyl 11-ethyl-2,3-dimethyl-4-oxo-2,3,4,5-tetrahydro-1H-2,5-methano-6,1,3-benzothiadiazocine-11-carboxylate was discovered. A plausible mechanism and factors influencing the course of the reaction are discussed.     

Reactions of silyl nitronates with dimethylformamide dimethyl acetal as a new general procedure for the synthesis of 2-nitroenamines

Silyl nitronates obtained in situ from the corresponding aliphatic nitro compounds react with dimethylformamide dimethyl acetal giving 2-nitroenamines in moderate to good yields. The reaction pathway is discussed.     

A study on interaction of Be, Mg and Ca with phenylalanine: Binding energies, metal ion affinities and IR signature of complex stability

The interaction between divalent metal cations and amino acids plays an important role in many biological processes. In present report, we have examined the effect of metal cations (Be⁺⁺, Mg⁺⁺ and Ca⁺⁺) interaction on structures, binding energies (BE), metal ion affinities (MIA) and infrared (IR) spectra of phenylalanine (Phe) molecule by density functional theory (DFT) calculations at B3LYP/6-311++G(d,p) level. Nine different ground state isomers of Phe molecule have been optimized at B3LYP/6-311++G (d,p) level of theory. The relative ground state energies of these nine isomers are lying between 0.0-1.9 kcal/mol with respect to the ground state energy of most stable Phe isomer. Seven most stable complexes of Phe molecule with Be⁺⁺, Mg⁺⁺ and Ca⁺⁺ [Phe+M]⁺⁺ (M = Be⁺⁺, Mg⁺⁺ and Ca⁺⁺) were studied. The calculated values of metal ion affinity (MIA), BE and the Gibbs free energies of each [Phe+M] ⁺⁺ complexes were found to be in the order of Be⁺⁺ > Mg⁺⁺ > Ca⁺⁺. Among the seven [Phe+M]⁺⁺ complexes, the most stable conformer has charge solvation structure where the metal cations coordinated through tridentate bonds with -N, -O atoms and benzene ring (N/O/Ring). The [Phe+Be]⁺⁺ complex has maximum MIA value, 353.3 kcal/mol than that of [Phe+Mg]⁺⁺ and [Phe + Ca]⁺⁺ complexes. Thus, the complex [Phe+Be]⁺⁺ is energetically more stable than that of [Phe+Mg]⁺⁺ and [Phe + Ca]⁺⁺. The IR spectra of each seven conformers of [Phe+M]⁺⁺ complexes have been also calculated. The wavnumber position of (-CO) stretching mode was used to determine the charge/salt bridge structures of the [Phe+M]⁺⁺ complex. The most stable [Phe+M]⁺⁺ complex has been also verified through the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) analysis.     

Statistical optimization of the silylation reaction of a mercaptosilane with silanol groups on the surface of silica gel

Thiol-modified silica is often used as an intermediate product for further synthesis of modified stationary phases for chromatography or purification processes. Different conditions were used to synthesize such thiol-modified particles, but systematic optimizations remained scarce. In this study the reaction conditions for the synthesis of mercaptopropyl-modified silica were optimized. The general synthetic method consists in slurrying the silica gel in toluene before adding 3-mercaptopropyldimethoxymethylsilane together with a tertiary amine as catalyst (here dimethylaminopyridine). Reaction time and temperature were optimized using a full factorial design of experiment (DoE) from 3 to 25 h with temperature varying between 45 and 105 °C. The surface coverage of the silica with mercaptopropyl-groups was analyzed by two different ways (elemental analysis and chemical surface reaction with 2,2′-dipyridyl disulfide followed by HPLC-UV analysis of stoichiometrically liberated pyridyl-2-thione). We obtained a three-dimensional (3D) plot of the surface coverage as a function of reaction time and temperature. The arch-shaped hyperplane allowed us to determine an optimum with regard to time and temperature, which yields to the highest surface coverage possible. We also verified that the increase of the surface coverage does not lead to a decrease of the stability of the surface modification by subjecting the gels to treatment with high temperature and acidic conditions. The stability was monitored by different chromatographic methods. Moreover, ²⁹Si cross-polarization-magic angle spinning (CP-MAS) NMR spectra of materials prepared by different conditions allowed to confirm that the Si species on the surface were essentially the same, while there was only a minute difference in signal intensities for the individual Si species for materials obtained by distinct temperatures.     

Glycine enolates: the effect of formation of iminium ions to simple ketones on alpha-amino carbon acidity and a comparison with pyridoxal iminium ions

Equilibrium constants in D2O were determined by 1H NMR analyses for formation of imines/iminium ions from addition of glycine methyl ester to acetone and from addition of glycine to phenylglyoxylate. First-order rate constants, also determined by 1H NMR, are reported for deuterium exchange between solvent D2O and the alpha-amino carbon of glycine methyl ester and glycine in the presence of increasing concentrations of ketone and Br?nsted bases. These rate and equilibrium data were used to calculate second-order rate constants for deprotonation by DO- and by Br?nsted bases of the alpha-imino carbon of the ketone adducts. Formation of the iminium ion between acetone and glycine methyl ester and between phenylglyoxylate and glycine is estimated to cause 7 unit and 15 unit decreases, respectively, in the pKa's of 21 and 29 for deprotonation of the parent carbon acids. The effect of formation of iminium ions to phenylglyoxylate and to 5'-deoxypyridoxal (DPL) [Toth, K.; Richard, J. P. J. Am. Chem. Soc. 2007, 129, 3013-3021] on the carbon acidity of glycine is similar. However, DPL is a much better catalyst than phenylglyoxylate of deprotonation of glycine, because of the exceptionally large thermodynamic driving force for conversion of the amino acid and DPL to the reactive iminium ion.     

MgBr2·OEt2 mediated protection of alcohols with hexamethyldisilazane: An efficient catalytic route for the preparation of silyl ethers under solvent-free conditions

Various types of alcohols and phenols were rapidly protected by hexamethyldisilazane in good to excellent yields at room temperature in the presence of catalytic amount of magnesium bromide ethyl etherate under solvent-free conditions. Good to excellent chemoselectivity was demonstrated for competitive protection of primary hydroxyls in the presence of secondary and tertiary alcohols. Highly selective protection of phenols in the presence of aromatic amines was also demonstrated successfully.