Self-assembling of Prussian blue nanocubic particles on nanoporous glassy carbon and its use in the electrocatalytic reduction of hydrogen peroxide

In this paper, self-assembled Prussian blue nanocubic particles on nanoporous glassy carbon was developed. The morphology of the PBNP-modified porous glassy carbon was characterized by scanning electron microscopy. The PBNP-GCE-red film-modified electrode was used for the sensitive detection of hydrogen peroxide. The electrochemical behavior of the resulting sensor was investigated using cyclic voltammetry and chronoamperometry. The value of α, k _cat, and D was calculated as 0.35, 1.7 × 10⁵ cm³ mol^?1 s^?1, and 2.6 × 10^?5 cm² s^?1, respectively. The calibration curve for hydrogen peroxide determination was linear over 0–600 μM with a detection limit (S/N = 3) of 0.51 μM.     

1H NMR utilization of through-space effects in configurational assignments. I—application to nitriles; determination of the separate effects of the electric field and anisotropy of the CN group

The changes in chemical shift induced by isomerization for all the ring protons of the Z- and E-5,5-dimethyl-2-cyclohexenylidene acetonitriles depend only on the through-space effects of the cyano group. The configurational assignments were made taking into consideration the anisotropic and electric field effects, either separately or together. In the first case, the total effects are Δ_XCN^T=?14.7×10^?6cm³ mol^?1 and bμ_CN^T=14.7×10^?30 cm³, respectively. The second approach allows the estimation of the values Δ_XCN=?4.9 × 10^?6 cm³ mol^?1 and bμ_CN=9.8 × 10^?3 cm³, reflecting the combined contributions of magnetic anisotropy and electric field to the total effect.     

2-Hydroxy-4-methylbenzenesulfonic acid dihydrate: Crystal structure, vibrational spectra, proton conductivity, and thermal stability

The crystal and molecular structure of 2-hydroxy4-methylbenzenesulfonic acid dihydrate C₆H₃(CH₃)(OHSO^? ₃ H₅O₂ ⁺ (I) was studied by X-ray diffraction and vibrational spectroscopy. The compound crystallized in the monoclinic crystal system; crystal data: a=10.853(2) Å, b=7.937(2) Å, c=12.732(3) Å, β=112.13(3)°, V=1015.9(4)ų,Z=4,d_calc=1.466g/cm³,spacegroupP2₁/c,R_f=0.0486,GOOF=1.161.The S-O distances in the sulfonate group differed substantially (S1-O2 1.439(2) Å, S1-O3 1.455(2) Å, and S1-O4 1.464(2) Å. The symmetry of the H₅O₂ cation decreased due to proton displacement toward one of the two water molecules. XRD data on the asymmetry of H5O2 were confirmed by IR and Raman spectral data. The strong triplet at 2900, 3166, 3377 cm^?1 in the IR spectrum of I corresponds to different types of H-bond and shifted to 2185, 2363, 2553 cm^?1 after deuteration. The proton conductivity of the compound was measured by impedance spectroscopy: 6 × 10^?7 S/cm at 298 K (32 rel %), E _act=0.4±0.01 eV. The conductivity increased to 10^-3 S/cm, E_act=0.1 eV when ambient humidity increased to 60 rel %.     

Direct electrochemistry and bioelectrocatalysis of a class II non-symbiotic plant haemoglobin immobilised on screen-printed carbon electrodes

In this study, direct electron transfer (ET) has been achieved between an immobilised non-symbiotic plant haemoglobin class II from Beta vulgaris (nsBvHb2) and three different screen-printed carbon electrodes based on graphite (SPCE), multi-walled carbon nanotubes (MWCNT-SPCE), and single-walled carbon nanotubes (SWCNT-SPCE) without the aid of any electron mediator. The nsBvHb2 modified electrodes were studied with cyclic voltammetry (CV) and also when placed in a wall-jet flow through cell for their electrocatalytic properties for reduction of H₂O₂. The immobilised nsBvHb2 displayed a couple of stable and well-defined redox peaks with a formal potential (E°′) of ?33.5 mV (vs. Ag|AgCl|3 M KCl) at pH 7.4. The ET rate constant of nsBvHb2, k _s, was also determined at the surface of the three types of electrodes in phosphate buffer solution pH 7.4, and was found to be 0.50 s^?1 on SPCE, 2.78 s^?1 on MWCNT-SPCE and 4.06 s^?1 on SWCNT-SPCE, respectively. The average surface coverage of electrochemically active nsBvHb2 immobilised on the SPCEs, MWCNT-SPCEs and SWCNT-SPCEs obtained was 2.85?×?10^?10 mol cm^?2, 4.13?×?10^?10 mol cm^?2 and 5.20?×?10^?10 mol cm^?2. During the experiments the immobilised nsBvHb2 was stable and kept its electrochemical and catalytic activities. The nsBvHb2 modified electrodes also displayed an excellent response to the reduction of hydrogen peroxide (H₂O₂) with a linear detection range from 1 μM to 1000 μM on the surface of SPCEs, from 0.5 μM to 1000 μM on MWCNT-SPCEs, and from 0.1 μM to 1000 μM on SWCNT-SPCEs. The lower limit of detection was 0.8 μM, 0.4 μM and 0.1 μM at 3σ at the SPCEs, the MWCNT-SPCEs, and the SWCNT-SPCEs, respectively, and the apparent Michaelis–Menten constant, $ {\hbox{K}}_{\rm{M}}^{\rm{app}} $ , for the H₂O₂ sensors was estimated to be 0.32 mM , 0.29 mM and 0.27 mM, respectively.     

Absolute rate constants for the reaction of O(3P) aroms with n-butane and NO(M  Ar) over the temperature range 298–439 K

Absolute rate constants for the reaction of O(³P) atoms with n-butane (k₂) and NO(M  Ar)(k₃) have been determined over the temperature range 298–439 K using a flash photolysis-NO₂ chemiluminescence technique. The Arrhenius expressions obtained were k₂ = 2.5 × 10^?11exp[-(4170 ± 300)/RT] cm³ molecule^?1 s^?1, k₃ = 1.46 × 10^?32 exp[940 ± 200)/ RT] cm⁶ molecule^?2 s^?1, with rate constants at room temperature of k₂ = (2.2 ± 0.4) × 10^?14 cm³ molecule^?1 s^?1 and k₃ = (7.04 ± 0.70)×10^?32 cm⁶ molecule^?2 s^?1. These rate constants are compared and discussed with literature values.     

Synergistic solvent extraction of copper, cobalt, rhodium and iridium into 1, 2-Dichloroethane at trace level by newly synthesized 25, 26, 27, 28-tetrahydroxy-5, 11, 17, 23-tetra-[4-(N-hydroxyl-3-phenylprop-2-enimidamido) phenylazo] calix[4]arene

A spectrophotometric method for determination of copper, cobalt, rhodium and iridium ions from nitric acid media after extraction of these ions by 25, 26, 27, 28-tetrahydroxy-5, 11, 17, 23-tetra-[4-(N-hydroxyl-3-phenylprop-2-enimidamido) phenylazo] calix [4] arene (THPAC) has been developed and possible synergistic effect has been investigated. The maximum enhancement was obtained in the presence of 30% 1, 2-dichloroethane in DMF and 3M nitric acid. The trace amounts of the metal were determined spectrophotometrically. Beer’s law was obeyed in concentration range 5.0–10.0 μg, 6.0–120.0 μg, 12.0–100.0 μg, and 10.0–130.0 μg/10 mL of the final solution of copper, cobalt, rhodium and iridium, respectively. The molar absorptivities (l mol^?1 cm^?1) and Sandell’s sensitivities (μg cm^?1) were calculated: Cu (II) = 0.96 × 10^4, 0.0066; Co (II) = 1.13 × 10⁴, 0.0052; Rh (III) = 0.98 × 10⁴, 0.012; and Ir (III) = 2.03 × 10⁴, 0.0095, respectively. Seven replicate analyses containing of 20.0 μg of Cu (II), 24.0 μg of Co (II), 36.0 μg of Rh (III) and 25.0 μg of Ir (III) gave mean absorbance 0.302, 0.462, 0.344, 0.264; and relative standard deviation 0.65, 0.85, 1.10, 1.08%, respectively. The interference of various ions was studied and optimum conditions were developed for determination of metals in certain alloys, environmental, pharmaceutical and synthetic samples.     

Deactivation of I(52P1/2) by CF3I,CH3I,C2H5I,and CH4

The technique of laser photolysis of alkyl and perfluoroalkyl iodides at 266 nm followed by time-resolved detection of the 1.3-μm emission from I^*(²P_1/2) has been used to measure the rate constants for deactivation of I^* by CH₃I, C₂H₅I, CF₃I, and CH₄. The recommended values are (2.76± 0.22) × 10^?13, (2.85 ± 0.40) × 10^?13, (3.5 ± 0.5) × 10^?17, and (7.52 ± 0.12) × 10^?14, respectively, in units of cm³ molecule^?1 S^?1.     

Synthesis of flower-like cuo hierarchical nanostructures as an electrochemical platform for glucose sensing

Flower-like CuO hierarchical nanostructures were synthesized on copper foil substrate through a simple wet chemical route in alkaline media at room temperature. SEM images collected at different reaction times revealed the transformation of initially formed Cu(OH)₂ nanowires to flower-like CuO nanostructures. The hierarchical structure of the as-prepared CuO showed high electrocatalytic activity towards the oxidation of glucose making it a promising electrode material for the development of non-enzymatic glucose sensor. The amperometric sensor exhibited a wide linear response to glucose ranging from 4.5 × 10^?5 to 1.3 × 10^?3 mol L^?1 (R ² = 0.99317) at fixed potential of 0.3 V. The detection limit was 6.9 × 10^?6 mol L^?1 (LOD = 3σ/s) with a sensitivity of 1.71 μA μmol^?1 cm^?2. Moreover, the developed sensor offers a fast amperometric response, good selectivity and stability.     

Reactions of the IO· radical resulting in hydrogen atom abstraction from halogen-containing molecules

A jet-stream kinetic technique and the resonance fluorescence method applied to detection of iodine atoms were used to measure the rate constants of the reactions of the IO^· radical with the halohydrocarbons CHFCl-CF₂Cl (k = (3.2 ± 0.9) × 10^?16 cm³ molecule s^?1) and CH₂ClF (k = (9.4 ± 1.3) × 10^?16 cm³ molecule s^?1), the hydrogen-containing haloethers CF₃-O-CH₃ (k = (6.4 ± 0.9) × 10^?16 cm³ molecule s^?1) and CF₃CH₂-O-CHF₂ (k = (1.2 ± 0.6) × 10^?15 cm³ molecule s^?1), and hydrogen iodide (k = (1.3 ± 0.9) × 10^?12 cm³ molecule s^?1) at 323 K.     

Rate constants for the reactions of chlorine atoms with hydrochloroethers at 298 k and atmospheric pressure

The relative rate technique has been used to determine the rate constants for the reactions Cl + CH₃OCHCl₂ → products and Cl + CH₃OCH₂CH₂Cl → products. Experiments were carried out at 298 ± 2 K and atmospheric pressure using nitrogen as the bath gas. The decay rates of the organic species were measured relative to those of 1,2‐dichloroethane, acetone, and ethane. Using rate constants of (1.3 ± 0.2) × 10^?12 cm³ molecule^?1 s^?1, (2.4 ± 0.4) × 10^?12 cm³ molecule^?1 s^?1, and (5.9 ± 0.6) × 10^?11 cm³ molecule^?1 s^?1 for the reactions of Cl atoms with 1,2‐dichloroethane, acetone, and ethane respectively, the following rate coefficients were derived for the reaction of Cl atoms (in units of cm³ molecule^?1 s^?1) with CH₃OCHCl₂, k= (1.04 ± 0.30) × 10^?12 and CH₃OCH₂CH₂Cl, k= (1.11 ± 0.20) × 10^?10. Errors quoted represent two σ, and include the errors due to the uncertainties in the rate constants used to place our relative measurements on an absolute basis. The rate constants obtained are compared with previous literature data and used to estimate the atmospheric lifetimes for the studied ethers. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 420–426, 2005     

Characterization of electrically conductive vanadate glass containing tungsten oxide

New conductive glass with a composition of 20BaO·10Fe₂O₃·xWO₃·(70 ? x)V₂O₅ (x = 10–50) was investigated by means of Mössbauer spectroscopy. A marked decrease in quadrupole splitting (Δ) was observed after the isothermal annealing at 500 °C for 1,000 min, due to the structural relaxation of 3D-network composed of FeO₄, VO₄, and VO₅ units. After the isothermal annealing, a marked increase in the electrical conductivity (σ) was observed from 1.7 × 10^?5 to 1.0 × 10^?1 S cm^?1 when “x” was 10, whereas comparable σ values of 1.1 × 10^?4 and 2.0 × 10^?4 S cm^?1 were observed when “x” was 40. These results evidently show that structural relaxation of 3D-network structure involved with a marked increase in σ is intrinsic of “vanadate glass”. XRD pattern indicated several weak peaks due to needle-like BaFe₂O₄ and α-Fe₂O₃ when the glass sample with “x” of 20 was annealed at 500 °C for 1,000 min. SEM study proved the formation of needle-like BaFe₂O₄ just on the surface of the sample, whereas hexagonal BaFe₁₂O₁₉ were observed in the annealed sample with “x” of 40. Chemical durability of WO₃-containing vanadate glass was investigated by immersing each glass sample into 20 %-HCl solution for 72 h.     

THE pKa OF DIPROTONATED SEMIMETHYLENE BLUE, IN 5% ETHANOL AND 50% ACETONITRILE AQUEOUS SOLUTIONS

Abstract— Semimethylene blue was generated by reductive quenching of triplet methylene blue, ³MBH²⁺, with diphenylamine at pH 0.62–3.4. A Q-switched ruby laser flash-photolysis-kinetic spectro-photometric apparatus was used to characterize the absorption spectrum of semimethylene blue from 350 to 900 nm and a number of physical constants at 25°C with μ= 0.4 M and Cl^? as the anion. The specific rate of quenching of ³MBH²⁺ by DPA is 2.8 × 10⁹M^?1 s^?1 in 5% EtOH-95% water and 1.2×10⁹M^?1 s^?1 in 50 v/v% aq. CH₃CN. Corresponding efficiencies of net electron transfer are, respectively, 0.15 and 0.62. Spectral characteristics in 5% EtOH are, for MBH²₂±, λ_max= 375 nm, ε₃₇₅= 9000 M^?1 cm^?1; λ_max= 880 nm, ε₈₈₀= 12700 M^?1 cm^?1; for MBH±, λ_max= 410 nm, ε₄₁₀= 9800 M^?1 cm^?1, λ_max= 880 nm, ε₈₈₀= 33000 M^?1 cm^?1; for MBH± in 50 v/v% AN, λ_max= 400 nm, ε₄₀₀= 11000 M^?1 cm^?1 and λ_max= 880 nm,ε₈₈₀= 39000 M^?1 cm^?1. The pK_a of MBH²₂ε calculated from the pH dependence of the absorption spectrum is 1.86 × 0.04 in 5% EtOH and 1.15 in 50 v/v% AN. Rate constants, k_decay, for reaction DPAH±⁺ with MBH²₂ε and MBH± in 5% EtOH are, respectively, 3.9 × 10⁹ and 9.5 × 10⁹M^?1 s^?1. The value of pK_a of MBH²₂ε calculated from the dependence of k_decay on pH is 1.75 in 5% EtOH.     

Ion-Molecule reactions in methylamine and dimethylamine and trimethylamine systems

Fourier transform ion cyclotron resonance mass spectrometry has been used to measure the reaction rates for ions derived from methylamine with dimethylamine or trimethylamine. The use of the selective ion ejection technique greatly simplifies the elucidation of the ion-molecule reaction channels. The rate constants for proton transfer from protonated metwlamine, CH₃NH ₃ ⁺ (m/z 32), to dimethylamine and trimethylamine are 16.1 ± 1.6 × 10^?10 and 9.3 ± 0.9 × 10^?10 cm³ molec^?1s^?1, respectively. The rate constants for charge transfer from methylamine molecular ion, CH₃NH ₂ ⁺ (m/z 31), to dimethylamine and trimethylamine are 9.3 ± 1.8 x 10^?10 and 15.0 ± 5 × 10^?10 cm³molec^?1s^?1, respectively.     

The first two excited 1Σg+ states of Cs2

Laser-induced fluorescence Of Cs₂ molecules in the infrared region (4000–9000 cm^?1) has been observed using several exciting wavelengths from an argon-ion laser and from a ring dye laser. Accurate molecular constants for the first two excited ¹Σ_g⁺ electronic states are derived from spectra recorded at high resolution by Fourier transform spectroscopy. Main molecular constants are: (2)¹Σ_g⁺: T_c = 12114.090 cm^?1, ω_e = 23.350 cm^?1, B_c = 7.4.5 × 10^?3 cm^?1, R_c = 5.8316 Å; (3)¹Σ_g⁺: T_e = 15975.450 cm^?1, ω_e = 22.423 cm^?1 , B_e = 8.23 × 10^?3 cm^?1, R_c = 5.5569 Å.     

Carbon ceramic electrodes modified with mixed oxides SiO<Subscript>2</Subscript>/SnO<Subscript>2</Subscript> for determination of levofloxacin

The preparation of a carbon ceramic electrode modified with SnO₂ (CCE/SnO₂) using tin dibutyl diacetate as precursor was optimized by a 2³ factorial design. The factors analyzed were catalyst (HCl), graphite/organic precursor ratio, and inorganic precursor (dibutyltin diacetate). The statistical treatment of the data showed that only the second-order interaction effect, catalyst × inorganic precursor, was significant at 95% confidence level, for the electrochemical response of the system. The obtained material was characterized by scanning electron microscopy (MEV), X-ray diffraction (XRD), RAMAN spectroscopy, XPS spectra, and voltammetric techniques. From the XPS spectra, it was confirmed the formation of the Si–O–Sn bond by the shift in the binding energy values referred to Sn 3d3/2 due to the interaction of Sn with SiOH species. The incorporation of SnO₂ provided an increment of the electrode response for levofloxacin, with Ipa = 147.0 μA for the ECC and Ipa = 228.8 μA for ECC/SnO₂, indicating that SnO₂ when incorporated into the silica network enhances the electron transfer process. Under the optimized working conditions, the peak current increased linearly with the levofloxacin concentration in the range from 6.21×10^?5 to 6.97×10^?4 mol L^?1 with quantification and detection limits of 3.80×10^?5 mol L^?1 (14.07 mg L^?1) and 1.13×10^?5 mol L^?1 (4.18 mg L^?1), respectively.     

Rate constant of the gas-phase reaction between Fe atoms and CO2

The rate constant of the gas-phase reaction Fe(a ⁵ D ₄) + CO₂ at 1180–2380 K and a total gas density of (7.0–10.0) × 10^?6 mol/cm³ behind incident shock waves is k(Fe + CO₂) = 1.4 × 10^{14.0 ± 0.3}exp[?(14590 ± 1100)/T] cm³ mol^?1 s^?1, as determined by resonance atomic absorption photometry. Using thermochemical data available from the literature, the rate constant of the reverse reaction was calculated to be k(Fe + CO) = 9.2 × 10^{11.0 ± 0.3} (T/1000)^0.57exp[?(490 ± 1100)/T] cm³ mol^?1 s^?1. The results are compared with data reported earlier.     

RP-LC Determination of Residual Monomers in Polycarboxylate Superplasticizers

A procedure was developed for the determination of residual monomers in polycarboxylate superplasticizer by reversed-phase high performance liquid chromatography. Seven kinds of residual monomers were quantitatively determined on a SinoChrom ODS-BP (C18) column and UV detector at 205 nm. The mobile phases which were used to determine micromolecular monomers were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 3) in the ratio of 8:92 (v/v). While the mobile phases for long side-chain monomers testing were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 6.5) in the ratio of 40:60 (v/v). The linear response ranged from 4.0 × 10^?6?C2.0 × 10^?3 mol L^?1. The detection limit was 0.12 × 10^?5?C0.8 × 10^?5 mol L^?1. Determination of real samples showed that relative standard deviation of high conversion rate samples was 3.1?C8.7% and standard addition recovery ratio was 91.5?C102.8%. While the relative standard deviation of low conversion rate samples was less than or close to 1% and the standard addition recovery ratio was 96.3?C103.1%.     

The ultraviolet absorption by alkylperoxy radicals and their mutual reactions

Methylperoxy radicals, CH₃O₂ · have been detected by UV light absorption in the photolysis of azomethane, oxygen and nitrogen mixtures using the technique of molecular modulation spectrometry. The radical concentration is shown to be governed by second-order kinetics. The results give the extinction coefficient, o (exponential), at the peak (λ = 240 nm) = 4.4 × 10^?18 molecule^?1 cm² and a value for the rate constant of mutual recombination, k, which lies between 2.2 × 10^?13 and 4.4 × 10^?13 molecule^?1 cm³ sec^?1. Similar results have been obtained when the azomethane was replaced by azoethane, suggesting the formation of C₂H₅O₂.     

Oxysulfure de scandium Sc2O2S

Sc₂O₂S is hexagonal, $\text{P6}{}_3\text{mmc}\text{, a = 3.5196(4)}$ Å, c = 12.519(2) Å, Z = 2, Dc = 3.807 g cm^?3, Dm = 4.014 g cm^?3, μ(MoKα) = 55.51 cm^?1. The final R value is 0.038 for 205 symmetry-independent reflections. This scandium oxysulfide has c = 12.52 Å, twice the value found in rare earth oxysulfides. An La₂O₂S cell combined with its reflection in a (001) mirror gives the Sc₂O₂S cell.     

Spectra and structure of small ring compounds: Part XXXV. Vibrational spectra and ring-puckering and torsional potential functions of cyclobutylamine

The IR spectra (50–4000 cm^?1) of gaseous and solid cyclobutylamine and cyclobutylamine-N-d₂ and the Raman spectra (25–4000 cm^?1) of gaseous, liquid and solid cyclobutylamine and cyclobutylamine-N-d₂ have been recorded. Depolarization values were measured for both the gaseous and liquid states. Most of the thirty-six fundamental vibrations have been assigned and support for more than one molecular configuration is presented. In the low frequency region for the “light” compound, a series of four Q-branches have been assigned to transitions between energy levels of the ring-puckering vibration for the equatorial isomer. The transitional frequencies were fitted to an asymmetric single-minimum potential function of the form: V(X) = 0.474 × 10⁶X⁴ - 0.204 × 10⁵X² + 0.993 × 10⁵X³ with a reduced mass of 160 amu. The following torsional potential constants were determined for the “light” molecule- V¹ = 77.8 ± 17.0 cm^?1, V₃ = 784.0 ± 3.3 cm^?1. The trans conformation was found to be more stable than the gauche form by approximately 58 cm^?1 (0.17 kcal mol^?1). The barriers to trans-gauche, gauche-trans, and gauche-gauche interconversion are 803, 745 and 803 cm^?1, respectively.