Kinetic study of the reactions of p‐nitrophenyl acetate and p‐nitrophenyl benzoate with oximate nucleophiles

The reactions of p‐nitrophenyl acetate (PNPA) and p‐nitrophenyl benzoate (PNPB) with α‐nucleophile oximates, that is, butane 2,3‐dione monoximate, pralidoximate, and other oximates have been studied in the presence of different cationic surfactants. The first‐order rate constant increases with increasing surfactant concentration. The extent of acceleration is dependent on the head group structure of surfactants. The PNPA is more reactive than PNPB toward all the nucleophiles at higher concentration of surfactants. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 57–64, 2009     

Access to 1‐Phospha‐2‐azanorbornenes by Phospha‐aza‐Diels–Alder Reactions

The unprecedented phospha‐aza‐Diels–Alder reaction between an activated electron‐poor imine and 2H‐phospholes yields 1‐phospha‐2‐azanorbornenes in a highly chemoselective and moderately diastereoselective reaction. The intermediate 2H‐phospholes, which act as dienes, are formed in situ from the corresponding 1H‐phospholes. Theoretical calculations confirm that the phospha‐aza‐Diels–Alder reaction is of normal electron demand. The reactive P?N bond in 1‐phospha‐2‐azanorbornenes can be cleaved by nucleophiles leading to the formation of 2,3‐dihydrophospholes.     

Synthesis and reactions of heterocyclic methyl 2-propenoates and 2,3-epoxypropanoates with nucleophiles

Reaction of 2-(3-,4-)pyridinecarboxaldehydes 5 with carbomethoxymethylene triphenylphosphorane afforded predominantly E-methyl-3-(pyridinyl)-2-propenoates 7. Oxidation of 7a-c with m-chloroperbenzoic acid gave methyl E-3-(1-oxidopyridinyl)-2-propenoates 8a-c in high yield. The Darzen's reaction of 5a-c with methyl bromoacetate yielded a mixture of stereoisomers cis- 9a-c and methyl trans-3-(pyridinyl)-2,3-epoxy-propanoates 10a-c in a ratio of 2:1. Oxidation of cis- 9a-c and trans- 10a-c afforded the corresponding cis- 11a-c and methyl trans-3-(1-oxidopyridinyl)-2,3-epoxypropanoates 12a-c in good yield. The reaction of 11a and 12a with cyclic amines as piperidine gave the respective threo- 13 and methyl erythro-2-(1-piperidino)-3-hydroxy-3-(1-oxido-2-pyridino)propanoate 14. The sodium borohydride reduction of the N-alkoxylcarbonyl pyridinium salts of 9c and 10c afforded the corresponding N-alkoxycarbonyl-1,2-dihydropyridyl derivatives 15 and 16. A number of selected compounds ( 7a-c , 9a-c , 10a , 10c , 11a-c and 12a , 12c ) were found to be inactive in the P388 Lymphocytic screen. Compounds 9-12 did not react with the model nucleophile ethanethiol in phosphate buffer at 37°.     

p‐Chloro‐, p‐bromo‐ and two polymorphs of p‐iodo­aceto­phenone

The title p‐haloaceto­phenones, C₈H₇XO (X = Cl, Br and I), have different packing modes. The chloro compound contains H⋯O and H⋯Cl contacts, but no Cl⋯O contacts. The bromo compound and one polymorph (A) of the iodo compound are isomorphous, with significant X⋯O contacts [Br⋯O = 3.320 (4) Å and I⋯O = 3.374 (5) Å]. In the other polymorph (B) of the iodo compound, the I⋯O distance is 3.082 (4) Å. Both polymorphs contain C—H⋯π contacts; these contacts are shorter in A than in B.     

Layer effects of photovoltaic heterojunction of fully conjugated heterocyclic aromatic rigid‐rod polymer poly‐p‐phenylenebenzobisoxazole

Poly‐p‐phenylenebenzobisoxazole (PBO) contains a fully conjugated rod‐like backbone entailing excellent optoelectronic properties and superior stabilities. Poly(2,3‐dihydrothieno‐1,4‐dioxin):polystyrenesulfonate (PEDOT:PSS) is a hole transferring medium, which was spun into a thin‐film between PBO and indium‐tin‐oxide to facilitate photovoltaic (PV) effect by forming a donor‐acceptor interlayer to separate and to transport photoinduced charges. Optimum PBO thickness for PV heterojunctions was about 71 nm at which the hole transferring PEDOT:PSS generated the maximum short circuit current (I_sc) at a thickness of 115 nm. By using a layer of lithium fluoride (LiF) as an electron transferring layer adhering to Al cathode, the most open circuit voltage (V_oc) and I_sc were achieved with a LiF thickness of 1–2 nm because of possible electric dipole effect leading to an increase of V_oc from 0.7 to 0.92 V and of I_sc from about 0.1 to 0.2 μA. No PV response was observed for all PBO homojunctions because of insufficient exciton separation into electrons and holes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 988–993, 2007     

Transition-metal catalyzed oxidative cross-coupling reactions to form C-C bonds involving organometallic reagents as nucleophiles

Transition-metal-catalyzed coupling reactions have become a versatile tool for chemical bond formation. From the variation of the coupling partners, coupling reactions can be classified into three models: traditional coupling, reductive coupling and oxidative coupling. The oxidative coupling, which is different from the traditional coupling, occurs between two nucleophiles. This critical review focuses on transition-metal-catalyzed oxidative coupling reactions involving organometallic reagents as nucleophiles. Since the scope of the oxidative coupling is highly diversified, this paper only reviews the oxidative coupling reactions concerning C-C bond formation, including the coupling between organometal reagents and hydrocarbons as well as coupling between two organometal reagents. Since terminal alkynes are normally activated by metal salts and in situ form the alkynyl metal reagents in coupling reactions, they are directly considered as organometal reagents in this review. Intramolecular oxidative couplings and oxidative cyclizations are not included in this critical review. Moreover, there are many examples of oxidative coupling leading to the formation of functional materials, such as the oxidative polymerization of thiophenes. Since several reviews in these areas have been published they are not included in this review either (99 references).     

Perfluoroalkylsulfone reactions with nucleophiles

Perfluorodialkylsulfones were found to react readily with metal hydroxides in water or alcohol solution and with ammonia to form fluorinated sulfonic acid derivatives.     

Dual Self‐Assembling Polycondensation of p‐Acetoxybenzoic Acid and p‐Acetamidobenzoic Acid

The dual self‐assembling polycondensation of p‐acetoxybenzoic acid (ABA) and p‐acetamidobenzoic acid in Therm S 800 was examined at 300 °C. Needle‐like crystals and lath‐like crystals were formed simultaneously through reaction‐induced crystallization of oligomers at a molar ratio of 30–50 mol‐% ABA in the feed. The needle‐like crystals comprised more p‐oxybenzoyl units, whereas the lath‐like ones contained higher amounts of p‐benzamide moieties.

     

p‐Nitro­phenyl isocyanide

Achiral p‐nitro­phenyl isocyanide, C₇H₄N₂O₂, crystallizes in the orthorhombic chiral space group P2₁2₁2₁. Attractive intermolecular interactions between the nitro O atoms and both aromatic H and nitro N atoms of neighbouring mol­ecules are observed. The O⋯N interaction is surprisingly strong [N⋯O = 2.869 (2) Å] compared with other aromatic nitro compounds.     

Relativistic and Non‐Relativistic Electronic Molecular‐Structure Calculations for Dimers of 4p‐, 5p‐, and 6p‐Block Elements

We report results of non‐relativistic and two‐component relativistic single‐reference coupled‐cluster with single and double and perturbative triple excitations [CCSD(T)] treatments for the 4p‐block dimers Ga₂ to Br₂, the 5p‐block dimers In₂ to I₂, and their atoms. Extended basis sets up to pentuple zeta are employed and energies extrapolated to the complete basis‐set limit. Relativistic and non‐relativistic results for the dissociation energy D_e are in close agreement with each other and previously published data, provided non‐relativistic or scalar‐relativistic results are corrected for spin–orbit contributions taken from the literature. An exception is Te₂ where theoretical results scatter by 0.085 eV. By virtue of this agreement it is unexpected that comparison with the experimental D₀ or D_e dissociation energies (zero‐point vibrational effects are negligible in this context) reveal errors larger than 0.1 eV for Ga₂, Ge₂, and Sb₂. Only relativistic treatments are presented for the 6p‐block cases Tl₂ to At₂. Sufficient agreement with experimental data is found only for Pb₂ and Bi₂, the deviation of the computed and experimental D₀ values for Po₂ is again larger than 0.1 eV. Deviations of 0.1 eV between the computed and experimental D₀ values are a major reason for concern and call for additional investigations in both fields to clarify the situation.     

Developing Phospha‐Stork Chemistry Induced by a Borane Lewis Acid

Bulky vinyl phosphanes undergo carbon–carbon coupling with aryl aldehydes with the help of the Lewis acid B(C₆F₅)₃ to give isolable methylene phosphonium products. Dimesityl(vinyl)phosphane undergoes a phospha‐Stork reaction with bulky enones efficiently catalyzed by B(C₆F₅)₃ to eventually yield the corresponding substituted cyclobutane products.     

1,3,5‐Tri‐p‐tolyl­biuret

MoOCl₂(L_OMe) as catalyst, where L_OMe is CpCo[P(O)(OMe)₂]₃, reacts with p‐tolyl isocyanate to afford the title compound, C₂₃H₂₃N₃O₂. The structural features are the intramolecular hydrogen bond forming a six‐membered ring and a nearly planar arrangement of the biuret moiety. Each p‐tolyl phenyl ring is twisted by approximately 60–80° with respect to the others. The bond lengths N1—C22 of 1.357 (3) Å and N2—C23 of 1.333 (3) Å indicate that they are partial double bonds.