A novel anhydrogalactosucrose derivative 2′‐methoxyl‐O‐1′,4′:3′,6′‐dianhydro‐β‐D‐fructofuranosyl 3,6‐anhydro‐4‐chloro‐4‐deoxy‐α‐D‐galactopyranoside ( 4 ) was prepared from 3,6:1′,4′:3′,6′‐trianhydro‐4‐chloro‐4‐deoxy‐galactosucrose ( 3 ) via a facile method and characterized by 1H NMR, 13C NMR and 2D NMR spectra. The single crystal X‐ray diffraction analysis shows that the title molecule forms a two thee‐dimensional network structure by two kinds of hydrogen bond interactions [O(2) H(2)···O(7), O(5) H(5)···O(8)]. Its stability was investigated by acid hydrolysis reaction treated with sulfuric acid, together with the formation of 1,6‐Di‐O‐methoxy‐4‐chloro‐4‐deoxy‐β‐D‐galactopyranose ( 5 ) and 2,2‐Di‐C‐methoxy‐1,4:3,6‐dianhydromannitol ( 6 ). According to the result, the relative stability of the ether bonds in the structure is in the order: C(1) O C(5)≈C(3′) O C(6′)≈C(1′) O C(4′)>C(3) O C(6)≈C(1) O C(2′)>C(2′) O C(5′). 相似文献
Summary: The laser irradiation at 193 nm of a gaseous mixture of carbon disulfide and ethene induces the copolymerization of both compounds and affords the chemical vapour deposition of a C/S/H polymer, the composition of which indicates the reaction between two to three CS2 molecules and one C2H4 molecule. Polymer structure is interpreted on the basis of X‐ray photoelectron and FT‐IR spectra as consisting of >CS, >CC<, CH2 CH2 , (CC)SnC4 − n, C (CS) S , S (CS) S , and C S S C configurations. The gas‐phase copolymerization of carbon disulfide and ethene represents the first example of such a reaction between carbon disulfide and a common monomer.
Scheme showing the expected reaction of excited CS2 molecules with other CS2 molecules to form dimers, which then react with another CS2 molecule or add to ethene. 相似文献
The reactivity of tBuLi (pentane) toward the N‐neopentyl‐substituted π‐excess P=CH–N heterocycle 1 depends on the solvent (tetrahydrofuran, diethyl ether, hexane, and toluene) and reaction conditions. Trapping of the resulting organolithium compounds with CO2/ClSiMe3, ClSiMe3, or EtI led to various products indicating CH lithiation ( 1a , b ), normal addition of tBuLi at the P=C bond (E/Z ‐2a , b ), inverse addition of the primary addition product 2Li at the P=C bond of a second molecule 1 , affording 3‐tert‐butyl‐2,2’‐bis(1,3‐benzazaphospholines) 3 , or inverse addition of tBuLi ( 4b,c ). The formation of 3 demonstrates a novel route to asymmetric heterocyclic 1,2‐diphosphine ligands. The structure elucidation of the new compounds is based on their 31P and 13C NMR data with conclusive chemical shifts and P–C coupling constants, that of the isolated PH‐functionalized diphosphine 3 on crystal structure analysis. 相似文献
The title compounds, rac‐(1′R,2R)‐tert‐butyl 2‐(1′‐hydroxyethyl)‐3‐(2‐nitrophenyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C17H20N2O6, (I), rac‐(1′S,2R)‐tert‐butyl 2‐[1′‐hydroxy‐3′‐(methoxycarbonyl)propyl]‐3‐(2‐nitrophenyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C20H24N2O8, (II), and rac‐(1′S,2R)‐tert‐butyl 2‐(4′‐bromo‐1′‐hydroxybutyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C13H20BrNO4, (III), are 5‐hydroxyalkyl derivatives of tert‐butyl 2‐oxo‐2,5‐dihydropyrrole‐1‐carboxylate. In all three compounds, the tert‐butoxycarbonyl (Boc) unit is orientated in the same manner with respect to the mean plane through the 2‐oxo‐2,5‐dihydro‐1H‐pyrrole ring. The hydroxyl substituent at one of the newly created chiral centres, which have relative R,R stereochemistry, is trans with respect to the oxo group of the pyrrole ring in (I), synthesized using acetaldehyde. When a larger aldehyde was used, as in compounds (II) and (III), the hydroxyl substituent was found to be cis with respect to the oxo group of the pyrrole ring. Here, the relative stereochemistry of the newly created chiral centres is R,S. In compound (I), O—H...O hydrogen bonding leads to an interesting hexagonal arrangement of symmetry‐related molecules. In (II) and (III), the hydroxyl groups are involved in bifurcated O—H...O hydrogen bonds, and centrosymmetric hydrogen‐bonded dimers are formed. The Mukaiyama crossed‐aldol‐type reaction was successful when using the 2‐nitrophenyl‐substituted hydroxypyrrole, or the unsubstituted hydroxypyrrole, and boron trifluoride diethyl ether as catalyst. The synthetic procedure leads to a syn configuration of the two newly created chiral centres in all three compounds. 相似文献
2‐Aryl‐4,5,6,7‐tetrahydro‐1,2‐benzisothiazol‐3(2H)‐ones 1a – e were synthesized by cyclocondensation of 2‐(thiocyanato)cyclohexene‐1‐carboxanilides 9 as a convenient new method. Their S‐oxides 10 were prepared by two routes, either by oxidation of 1 or dehydration of rac‐cis‐3‐hydroperoxysultims 11 . Furthermore, compounds 1 have been identified by HPLC? API‐MS‐MS as intermediates in the oxidation process of the salts 6 . The hydroperoxides 12b and rac‐trans‐ 11b have been unambiguously detected by HPLC? MS investigations and in the reaction of rac‐cis‐ 13b with H2O2 to the hydroperoxides rac‐trans‐ 11b and rac‐cis‐ 11b . 相似文献
Contributions to the Chemistry of Phosphorus. 244. The First Oxatetraphospholane, (PBut)4O Under suitable conditions, the reaction ot tri‐tertbutylcyclotriphosphane, (PBut)3, with di‐tert‐butylperoxide gives rise to a mixture of 2,3,4,5‐tetra‐tert‐butyl‐1,2,3,4,5‐oxatetraphospholane, (PBut)4O ( 1 ), and 1,2‐di‐tert‐butyl‐1,2‐di‐tert‐butoxidiphosphane, [But(ButO)P]2 ( 2 ). Both compounds have been isolated in the pure state. The oxatetraphospholane 1 is a constitutional isomer of 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, which has been reported recently [1]. The corresponding reaction of tetra‐tert‐butylcyclotetraphosphane furnishes only small amounts of 1 because of the kinetic stability of (PBut)4. The diphosphane 2 is presumably a secondary product of primarily formed oxocyclotetraphosphanes (PBut)4O1–4. The NMR parameters of 1 and 2 are reported and discussed. 相似文献
Summary: FT Raman microspectroscopy was used for polarization experiments on strained hemp fibre cells. The cellulosic plant fibers were macerated with alkaline and enzymatic solutions. Those cleaned and refined single fiber cells were subjected to micro tensile tests as well as to polarization measurements under the FT Raman microscope. Mechanical parameters of the fiber cells (e.g. E-modulus) were determined and changes in orientation of the (C O C) structure units of the cellulose were considered with respect to fiber stress and molecular fiber structures. Intensity ratios R1 and R2 calculated on the polarized micro FT Raman spectra of the strained fibers describe the order parameter 〈P2〉 and 〈P4〉 allowing the quantitative determination of the orientation of the structure units (C O C) of fiber cellulose with respect to the fiber cell axis. 相似文献
Four tetramethyl 4,4′‐(ethane‐1,2‐diylidene)bis[1‐R‐5‐oxo‐4,5‐dihydro‐1H‐pyrrole‐2,3‐dicarboxylate] compounds, denoted class (1), are a series of conjugated buta‐1,3‐dienes substituted with a heterocyclic group. The compounds can be used as dyes and pigments due to their long‐range conjugated systems. Four structures were studied using 1H NMR, 13C NMR and mass spectroscopy, viz. with R = 2,4,6‐trimethylphenyl, (1a), R = cyclohexyl, (1b), R = tert‐butyl, (1c), and R = isopropyl, (1d). A detailed discussion is presented regarding the characteristics of the three‐dimensional structures based on NMR analysis and the X‐ray crystal structure of (1a), namely tetramethyl 4,4′‐(ethane‐1,2‐diylidene)bis[5‐oxo‐1‐(2,4,6‐trimethylphenyl)‐4,5‐dihydro‐1H‐pyrrole‐2,3‐dicarboxylate], C36H36N2O10. The conjugation plane and stability were also studied via quantum chemical calculations. 相似文献
Contributions to the Chemistry of Phosphorus. 243 On the Oxocyclotetraphosphanes (PBut)4O1–4 Under suitable conditions, the reaction of tetra‐tert‐butylcyclotetraphosphane, (PBut)4, with dry atmospheric oxygen gives rise to the corresponding monoxide (PBut)4O ( 1 ) which has been isolated by column chromatography. The reaction with hydrogen peroxide furnishes a mixture of oxocyclotetraphosphanes (PBut)4O1–4 consisting of two constitutionally isomeric dioxides (PBut)4O2 ( 2 a , 2 b ), the trioxide (PBut)4O3 ( 3 ), and the tetraoxide (PBut)4O4 ( 4 ), in addition to 1 . According to the 31P NMR parameters the oxygen atoms are exclusively exocyclically bonded to the phosphorus four‐membered ring. Which of the P atoms are present as λ5‐phosphorus follows from the different low‐field shifts of the individual P nuclei compared with the starting compound. Accordingly, 1 is 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, 2 a and 2 b are 1,2,3,4‐Tetra‐tert‐butyl‐1,2‐dioxo‐ and ‐1,3‐dioxocyclotetraphosphane, respectively, 3 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3‐trioxocyclotetraphosphane, and 4 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3,4‐tetraoxocyclotetraphosphane. When the oxidation reaction proceeds a fission of the P4 ring takes place. 相似文献
X‐ray studies reveal that tert‐butyl (6S)‐6‐isobutyl‐2,4‐dioxopiperidine‐1‐carboxylate occurs in the 4‐enol form, viz. tert‐butyl (6S)‐4‐hydroxy‐6‐isobutyl‐2‐oxo‐1,2,5,6‐tetrahydropyridine‐1‐carboxylate, C14H23NO4, when crystals are grown from a mixture of dichloromethane and pentane, and has an axial orientation of the isobutyl side chain at the 6‐position of the piperidine ring. Reduction of the keto functionality leads predominantly to the corresponding β‐hydroxylated δ‐lactam, tert‐butyl (4R,6S)‐4‐hydroxy‐6‐isobutyl‐2‐oxopiperidine‐1‐carboxylate, C14H25NO4, with a cis configuration of the 4‐hydroxy and 6‐isobutyl groups. The two compounds show similar molecular packing driven by strong O—H⋯O=C hydrogen bonds, leading to infinite chains in the crystal structure. 相似文献