Blue‐emitting poly(1,3‐phenylenevinylene) derivatives: Effect of substitution patterns on optical properties

Blue‐emitting poly{[5‐(diphenylamino)‐1,3‐phenylenevinylene]‐alt‐(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)} ( 3 ), poly{[5‐bis‐(4‐butyl‐phenylamino)‐1,3‐phenylenevinylene]‐alt‐(1,3‐phenylene vinylene)} ( 4 ), and poly(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene) ( 5 ) were synthesized by the Wittig–Horner reaction. Although polymers 3–5 possess fluorescent quantum yields of only 13–34% in tetrahydrofuran solution, their films appear to be highly luminescent. Attachments of substituents tuned the emission color of thin films to the desirable blue region (λ_max = 462–477 nm). Double‐layer light‐emitting‐diode devices with 3 and 5 as an emissive layer produced blue emission (λ_em = 474 and 477 nm) with turn‐on voltages of 8 and 11 V, respectively. The external quantum efficiencies were up to 0.13%. © 2005Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2800–2809, 2005     

Synthesis of two 1,3‐2,4‐calix[4]bis‐crown ethers containing two 1,2‐phenylene and one pyridine or anisole units in each crown ether moiety

Syntheses of 1,3–2,4‐calix[4]bis‐crown ethers ( 1 and 2 ) fixed in the 1,3‐alternate conformation by 1,3‐ and 2,4‐bridges made of two modified polyether chains each containing two 1,2‐phenylene residues and one pyridine or anisyl unit are reported. The structures of compounds 1 and 2 were established by ¹H nmr, ¹³C nmr, hrms and elemental analyses.     

25,27‐(6‐Tosyl‐3,9‐dioxa‐6‐aza­un­decane‐1,11‐diyldioxy)‐26,28‐(3,6,9‐trioxaun­decane‐1,11‐diyldioxy)­calix­[4]­arene

A new calix­[4]‐­crowned aza­crown ether, C₅₁H₅₉NO₁₁S, consisting of four phenyl rings in a 1,3‐alternate conformation was synthesized from the reaction of 25,27‐bis(5‐chloro‐3‐oxa­pentyl­oxy)­calix­[4]­crown‐5 and p‐toluene­sulfon­amide in the presence of Cs₂CO₃. A crown‐5 loop was attached on the two facing lower rims of the calix­[4]­arene and the N‐tosyl aza­crown group was attached on the other set of lower rims of the calix­[4]­arene backbone. This mol­ecule seems to offer an inside cavity for the formation of a host–guest complex.     

Efficient Preparation of 2, 2′‐Disubstituted‐3, 3′‐(1, 4‐phenylene)bis‐thienopyrimidin‐4‐ones Based on an aza‐Wittig Reaction

Tandem aza‐Wittig reaction of iminophosphorane with 1, 4‐phenylene diisocyanate followed by intramolecular heteroconjugate addition annulation after addition of a nucleophilic reagent (amine, phenol, and alcohol), in the presence of catalytic K₂CO₃ or NaOR, gives selectively the functionalized substituted 2, 2′‐di(alkylamino, aryloxy)‐3, 3′‐(1, 4‐phenylene)bis(thieno[3, 2‐d]pyrimidin‐4(3H)‐ones) and 2, 2′‐di(alkylamino or alkoxy)‐3, 3′‐(1, 4‐phenylene)bis(3, 5, 6, 7‐tetrahydro‐4H‐cyclopenta[4, 5]thieno[2, 3‐d]pyrimidin‐4‐ones).     

Diisothiocyanates as heterodienophiles or dipolarophiles in the presence of α‐thioxothioamides or mesoionic thiazoles

Reactions of α‐thioxothioamides ( 1 ) with diisothiocyanates were carried out in the hope of generating the N,N′‐bis(1,3‐thiazoline‐2‐thiones) ( A ). Although that purpose could not be achieved, we succeeded in preparing the monocycloadducts 7 from the phenylene‐1,2‐diisothiocyanate ( 4 ). The benzimidazole derivatives 8 and 9 were also characterized and a mechanism was assumed to account for this intramolecular process. On the other hand, the regioselective synthesis of the N,N′‐biimidazole ( 13 ) containing the phenylene bridge was performed by the treatment of the 5‐aminothiazolium chloride ( 2 ) with the diisothiocyanate ( 4 ) in a basic medium. The mesoionic derivative 13 probably arises from the monoimidazolium‐4‐thiolate ( 12 ) which was shown to react with the salt 2 under similar conditions to give the primary cycloadduct 14 as an intermediate towards the bis(imidazolium) ( 13 ). © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:617–624, 2001     

Synthesis,crystal structure and photophysical properties of 1,4‐bis(1,3‐diazaazulen‐2‐yl)benzene: a new π building block

A dimerized 1,3‐diazaazulene derivative, namely 1,4‐bis(1,3‐diazaazulen‐2‐yl)benzene [or 2,2′‐(1,4‐phenylene)bis(1,3‐diazaazulene)], C₂₂H₁₄N₄, (I), has been synthesized successfully through the condensation reaction between 2‐methoxytropone and benzene‐1,4‐dicarboximidamide hydrochloride, and was characterized by ¹H NMR and ¹³C NMR spectroscopies, and ESI–MS. X‐ray diffraction analysis reveals that (I) has a nearly planar structure with good π‐electron delocalization, indicating that it might serve as a π building block. The crystal belongs to the monoclinic system. One‐dimensional chains were formed along the a axis through π–π interactions and adjacent chains are stabilized by C—H…N interactions, forming a three‐dimensional architecture. The solid emission of (I) in the crystalline form exhibited a 170 nm red shift compared with that in the solution state. The observed optical bandgap for (I) is 3.22 eV and a cyclic voltammetry experiment confirmed the energy levels of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). The calculated bandgap for (I) is 3.37 eV, which is very close to the experimental result. In addition, the polarizability and hyperpolarizability of (I) were appraised for its further application in second‐order nonlinear optical materials.     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Effect of pH on the rotational conformations of 1,3‐diamino‐2‐hydroxypropane

The effect of pH on the rotational conformations of 1,3‐diamino‐2‐hydroxypropane in aqueous solution was investigated by proton NMR. Both the observed chemical shifts and coupling constants were used to calculate experimental pK_a values. The observed couplings were correlated with the expected couplings for the various possible staggered conformations to try to determine the pattern of conformations for the diamine and its conjugate acids. The best fits suggested a modest preference for the gauche–gauche conformation, especially at low pH, where the diprotonated hydroxydiamine predominates. In methanol, dimethyl sulfoxide and trichloromethane solutions, it was only possible to evaluate the conformational equilibria of the diamine. Slow proton exchange, which caused uncertainties in both chemical shifts and couplings for the monoprotonated and unprotonated diamine, nullified efforts to determine whether or not hydrogen bonding was important for these species in less polar solvents. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

Microwave‐assisted synthesis and diels–alder reactions of 1,3‐azaphospholo[5,1‐a]isoquinolines

The application of microwave technique has been extended successfully for the first time to the synthesis of a representative class of azaphospholes, viz. 1,3‐bis(alkoxycarbonyl)‐1,3‐azaphospholo[5,1‐a]isoquinolines ( 2 ), which occurs rapidly giving higher yields. Stereoselectivity is observed in the reaction with 2,3‐dimethyl‐1,3‐butadiene, and isoprene reacts regioselectively as well. 1‐Methyl‐3‐ethoxycarbonyl‐1,3‐azaphospholo[1,5‐a]pyridine ( 4 ) remains inert toward [2+4] cycloaddition. The nonoccurrence of the Diels–Alder reaction in the latter case has been supported by semiempirical PM3 calculations. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:560–563, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10193     

A convenient synthesis of novel 7‐phosphonylbenzyl‐2‐substituted pyrazolo[4,3‐e]‐1,2,4‐triazolo[1,5‐c]‐pyrimidine derivatives

A series of pyrazolo[4,3‐e]‐1,2,4‐triazolo‐[1,5‐c]pyrimidine derivatives, bearing phosphonylbenzyl chain in position 7, were conveniently synthesized in an attempt to obtain potent and selective antagonists for the A_2A adenosine receptor or potent pesticide lead compounds. Diethyl[(5‐amino‐4‐cyano‐3‐methylsulfanyl‐pyrazol‐1‐yl)‐benzyl]phospho‐nate ( 3 ), which was prepared by the cyclization of diethyl 1‐hydrazinobenzylphosphonate ( 1 ) with 2‐[bis(methylthio)methylene]malononitrile ( 2 ), reacted with triethyl orthoformate to afford diethyl[(4‐cyano‐5‐ethoxymethyleneamino‐3‐methylsulfanyl‐pyrazol‐1‐yl)‐benzyl]phosphonate ( 4 ), which reacted with various acyl hydrazines in refluxing 2‐methoxyethanol to give the target compounds 5a–h in good yields. Their structures were confirmed by IR, ¹H NMR, ¹³C NMR, MS, and elemental analysis. The crystal structure of 5e was determined by single crystal X‐ray diffraction © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:634–638, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20478     

N‐(2‐Hydroxyethyl)‐N‐methyldithiocarbamato Complexes of Nickel(II) with Phosphorus Donor Ligands

Planar nickel(II) complexes involving N‐(2‐Hydroxyethyl)‐N‐methyldithiocarbamate, such as [NiX(nmedtc)(PPh₃)] (X = Cl, NCS; PPh₃ = triphenylphosphine), and [Ni(nmedtc)(P‐P)]ClO₄(P‐P = 1,1‐bis(diphenylphosphino)methane(dppm); 1,3‐bis(diphenylphosphino)propane (1,3‐dppp); 1,4‐bis(diphenylphosphino)butane(1,4‐dppb) have been synthesized. The complexes have been characterized by elemental analyses, IR and electronic spectroscopies. The increased νC–N value in all the complexes is due to the mesomeric drift of electrons from the dithiocarbamate ligands to the metal atom. Single crystal X‐ray structure of [Ni(nmedtc)(1,3‐dppp)]ClO₄·H₂O is reported. In the present 1,3‐dppp chelate, the P–Ni–P angle is higher than that found in 1,2‐bis(diphenylphosphino)ethane‐nickel chelates and lower than 1,4‐bis(diphenylphosphino)butane‐nickel chelates, as a result of presence of the flexible propyl back bone connecting the two phosphorus atoms of the complex.     

Thermal analysis of 1,4‐di[n′‐(quinolyl)]buta‐1,3‐diynes,structure, and topo‐oligomerization: Polymerization of 3‐ethynylquinoline with the triethyl aluminum/vanadium 2,4‐pentanedionate catalyst system

Conjugated 1,4‐bis(n′‐quinolyl)‐1,3‐butadiynes were obtained through the oxidative dimerization of the corresponding n′‐ethynylquinolines catalyzed by cuprous chloride. Differential scanning calorimetry analysis of the 1,4‐bis[n′‐(quinolyl)]buta‐1,3‐diyne molecules produced evidence of a syn–anti rotational equilibrium around the 1,3‐diyne axis and an irreversible transformation into a thermopolymer. The topo‐oligomerization of 1,4‐bis[3′‐(quinolyl)]buta‐1,3‐diyne, which took place by irradiation with sunlight, was investigated with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. Accurate X‐ray molecular structure and refinement analysis of 1,4‐bis[3′‐(quinolyl)]buta‐1,3‐diyne was conducted. The molecular crystalline packing consisted of parallel arrays of two groups of centrosymmetric molecules (antirotamer) in a herringbone assemblage in the solid state. The polymerization of 3‐ethynylquinoline was carried out with the AlEt₃/V(acac)₃ system to produce a mixture of 1,2,4‐ and 1,3,5‐tris(3′‐quinolyl)benzene cyclotrimers and a trans–cisoid polyene structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6031–6040, 2004     

Propane‐1,3‐diaminium tetrachloridozincate(II) 18‐crown‐6 clathrate

The reaction of propane‐1,3‐diamine hydrochloride, 18‐crown‐6 and zinc(II) chloride in methanol solution yields the title complex salt [systematic name: propane‐1,3‐diaminium tetrachloridozincate(II)–1,4,7,10,13,16‐hexaoxacyclooctadecane (1/1)], (C₃H₁₂N₂)[ZnCl₄]·C₁₂H₂₄O₆, with an unusual supramolecular structure. The diprotonated propane‐1,3‐diaminium cation forms an unexpected 1:1 supramolecular rotator–stator complex with the crown ether, viz. [C₃H₁₂N₂(18‐crown‐6)]²⁺, in which one of the –NH₃⁺ substituents nests in the crown and interacts through N—H...O hydrogen bonding. The other –NH₃⁺ group interacts with the [ZnCl₄]²⁻ anion via N—H...Cl hydrogen bonding, forming cation–crown–anion ribbons parallel to [010].     

Random poly(fluorenylene‐vinylene)s containing 3,7‐Dibenzothiophene‐5,5‐dioxide units: Synthesis,photophysical, and electroluminescence properties

The synthesis of new random poly(arylene‐vinylene)s containing the electron withdrawing 3,7‐dibenzothiophene‐5,5‐dioxide unit was achieved by the Suzuki–Heck cascade polymerization reaction. The properties of poly[9,9‐bis(2‐ethylhexyl)‐2,7‐fluorenylene‐vinylene‐co‐3,7‐dibenzothiophene‐5,5‐dioxide‐vinylene] (50/50 mol/mol, P1 ) and poly[1,4‐bis(2‐ethylhexyloxy)‐2,5‐phenylene‐vinylene‐co‐3,7‐dibenzothiophene‐5,5‐dioxide‐vinylene] (50/50 mol/mol, P2 ) were compared with those of terpolymers obtained by combining the fluorene, dibenzothiophene, and 1,4‐bis(2‐ethylexyloxy)benzene in 20/40/40 ( P3 ), 50/25/25 ( P4 ), and 80/10/10 ( P5 ) molar ratios. The polymers were characterized by ¹H NMR and IR, whereas their thermal properties were investigated by TGA and DSC. Polymers P1–5 are blue–green emitters in solution (λ_em between 481 and 521 nm) whereas a profound red shift observed in the solid state is emission (λ_em from 578 to 608 nm) that can be attributed both to the charge transfer stabilization exerted by the polar medium and to intermolecular interactions occurring in the solid state. Cyclic voltammetry permitted the evaluation of the ionization potentials and also revealed a quasi‐reversible behavior in the reduction scans for the polymers ( P1–4 ) containing the higher amounts of 3,7‐dibenzothiophene‐5,5‐dioxide units. Electroluminescent devices with both ITO/PEDOT‐PSS/ P1–5 /Ca/Al (Type I) and ITO/PEDOT‐PSS/ P1–5 /Alq₃/Ca/Al (Type II) configuration were fabricated showing a yellow to yellow–green emission. In the case of P4 , a luminance of 1835 cd/m² and an efficiency of 0.25 cd/A at 14 V were obtained for the Type II devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2093–2104, 2009     

Synthesis and anti‐HIV‐1 activity of 1,3‐phenylene bis‐uracil analogues of MKC‐442

Reaction of 1,3‐phenylenediacetonitrile with the zinc organometallic reagent of ethyl 2‐bromobutyrate afforded the 1,3‐phenylene‐bis(acetoacetate) 2 which was used as the starting material for the synthesis of 1,3‐phenylene‐bis[6‐(2‐thiouracil)] 4 . Desulphurization of 4 gave the corresponding bis‐uracil 6 , which after silylation was N‐1 alkylated with bis(allyoxy)methane using TMS‐triflate as the catalyst or with chloromethyl ethyl ether to give the MKC‐442 analogues 7 and 9 . The amino‐DABO and S‐DABO derivatives 11, 12a,b and 14 were also synthesized. The anti‐HIV‐1 activity test showed that when MKC‐442 analogues were constructed with 1,3‐phenylene in all cases they were detrimental to have activity against HIV‐1.     

Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Synthesis and Spectroscopic Characterization of New Double‐Armed Benzo‐15‐Crown‐5 Derivatives and Their Sodium Complexes

Double‐armed crown ether aldehydes ( 1–3 ) were synthesized from the reaction of 2 equiv salicylaldehyde, 4‐hydroxy‐3‐methoxybenzaldehyde (vanillin), and 3‐hydroxy‐4‐methoxybenzaldehyde (iso‐vanillin) with 4′,5′‐bis(bromomethyl)benzo‐15‐crown‐5. New crown ethers imine compounds ( 4–9 ) were synthesized by the condensation of corresponding crown ether aldehydes ( 1–3 ) with 4‐amino‐1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3H‐pyrazole‐3‐one and 2‐furan‐2‐yl‐methylamine. Sodium complexes ( 1a–9a) of the crown compounds form crystalline 1:1 (Na⁺:ligand) stoichiometries and were also synthesized. The structures of the crown ether aldehydes ( 1–3 ), imine compounds ( 4–9 ), and complexes ( 1a–9a ) were confirmed on the basis of elemental analyses, IR, ¹H and ¹³C NMR, and mass spectrometry. © 2013 Wiley Periodicals, Inc. Heteroatom Chem 24:100–109, 2013; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21070     

Acyclic Schiff base salts derived from 1,3‐diaminopropane and 1,3‐diamino‐2‐hydroxypropane

Two salts of acyclic Schiff base cationic ligands, namely N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride monohydrate, C₁₇H₂₂N₄O₄²⁺·2Cl⁻·H₂O, (I), and 2‐hydroxy‐N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride, C₁₇H₂₂N₄O₅²⁺·2Cl⁻, (II), were synthesized as precursors in order to obtain new acyclic and macrocyclic multidentate ligands and complexes. The cation conformations in compounds (I) and (II) are different in the solid state, although the cations are closely related chemically. Similarly, the hydrogen‐bonding networks involving ammonium cations, hydroxyl groups and chloride anions are also different. In the cation of compound (II), the hydroxyl group is disordered over two sets of sites, with occupancies of 0.785 (8) and 0.215 (8).