Electrical,structural, and thermal studies of antimony trioxide-doped poly(acrylic acid)-based composite polymer electrolytes

In this work, we investigate the electrical, structural, and thermal properties of composite polymer electrolytes (CPEs). Different mass fractions of antimony trioxide filler, Sb₂O₃, are added into poly(acrylic acid) (PAA)-based polymer electrolytes with N-lithiotrifluoromethane sulphonamide [LiN(SO₂CF₃)₂] (LiTFSI) as doping salt. Characteristics such as alternating current (AC)–impedance spectroscopy, attenuated total reflectance–Fourier transform infrared (ATR-FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) are analyzed. The highest ionic conductivity of (2.15?±?0.01)?×?10^?4 S cm^?1 is achieved at room temperature with addition of 6 wt% of fillers. The ionic transportation is further proven in a transference number study under DC polarization, whereas ATR-FTIR is employed to explore the complexation between PAA, LiTFSI, and Sb₂O₃. TGA reveals the improved thermal stability of CPEs. The glass transition temperature (T _g) is reduced upon addition of Sb₂O₃ as shown in DSC analysis.     

Conductivity studies of poly(ethylene oxide)(PEO)/poly(vinyl alcohol) (PVA) blend gel polymer electrolytes for dye-sensitized solar cells

Poly(ethylene oxide)(PEO)–poly(vinyl alcohol) (PVA) blend-based gel polymer electrolytes (GPEs) have been prepared by blending equal weights of PEO and PVA in ethylene carbonate (EC), dimethyl sulfoxide (DMSO), tetrabutylammonium iodide (TBAI), and iodine crystals (I₂). The conductivity, diffusion coefficient, number density, and ion mobility of the electrolytes have been calculated from the impedance data obtained from electrochemical impedance spectroscopy (EIS) measurements. The GPE with the composition of 7.02 wt%, PVA, 7.02 wt% PEO, 30.11 wt% ethylene carbonate (EC), 30.11 wt% DMSO, 24.08 wt% TBAI and 1.66 wt% I₂ exhibits the highest conductivity of 5.5 mS cm^?1 at room temperature. Dye-sensitized solar cells (DSSCs) with configuration fluorine tin oxide (FTO)/titanium dioxide/N3-dye/GPE/platinum/FTO have been fabricated and tested under the white light of intensity 100 mW cm^?2. The DSSC containing the highest conducting GPE exhibits the highest power conversion efficiency, η of 5.36 %.     

Electrochemical studies on polymer electrolytes based on poly(methyl methacrylate)-grafted natural rubber for lithium polymer battery

MG30 is natural rubber grafted with 30% poly(methyl methacrylate). Gel polymer electrolytes containing MG30–LiCF₃SO₃–X (X = propylene carbonate, ethylene carbonate) are prepared by solution casting technique. The polymer–salt complexes were investigated using Fourier-transformed infrared. The ionic conductivity of the electrolytes are determined by the ac impedance studies over the temperature range of 303–383 K and is observed to obey the Vogel–Tamman–Fulcher (VTF) rule. The Li⁺ transference number obtained using the Bruce and Vincent method is <0.3. The Li/Li⁺ interface stability is established and the electrolytes were found to be able to withstand a voltage of more than 4.2 V.     

Ionic conductivity and interfacial resistance of electrospun poly(acrylonitrile)/poly(methyl methacrylate) fibrous membrane-based polymer electrolytes for lithium ion batteries

Electrospun poly(acrylonitrile) fibrous membrane (PAN-EFM) is prepared and enhanced by adding poly(methyl methacrylate)(PMMA) and subsequently minimizing the average diameter of the PAN/PMMA blend fibers. Electrospinning of the 50/50 wt% PAN/PMMA solution is carried out with the aim of the simultaneous presence of both polymers on the fiber surface. Their presence in exterior surface is confirmed using the Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) technique next to the leaching of PMMA with acetone. The process parameters are optimized in four stable modes with the average diameter decreasing from 445 to 150 nm. Mechanical strength of the membrane is measured and reported. Comparing the sample electrochemical properties of the EFMs reveals that the addition of PMMA increases ionic conductivity from 1.02 to 3.31 mS cm^?1 and reduces interfacial resistance from ~1000 to ~400?Ω. It is also demonstrated that the ~300-nm reduction in average diameter of the blend fibers increases ionic conductivity from 3.31 to 5.81 mS cm^?1 and reduces interfacial resistance from ~400 to ~200?Ω.     

Ionic conductivity studies of 49% poly(methyl methacrylate)-grafted natural rubber-based solid polymer electrolytes

The potential of 49% poly(methyl methacrylate)-grafted natural rubber (MG49) as a solid polymer electrolyte film in rechargeable batteries system were explored. The flat, thin, and flexible films were prepared by solution casting technique. The ionic conductivity was investigated by alternating current impedance spectroscopy. The highest conductivity of 2.3 × 10⁻⁷ Scm⁻¹ was obtained at 20wt.% of LiBF₄ salts content, while 4.0 × 10⁻⁸ Scm⁻¹ was obtained at 15wt.% LiClO₄ salts loading. The observation on structure performed by X-ray diffraction shows the highest conductivity appears at amorphous phase.     

Infrared studies of crystallinity in poly(vinyl chloride)

The infrared spectrum of a solvent-cast film of commercial poly(vinyl chloride) (PVC) can be very sensitively compared to a rapidly quenched film of the same material by using a compensation technique. When this is done, crystalline bands, as seen in urea canal complex PVC, can be detected and measured in the solvent-cast film. The melting and recrystallization behavior as well as the broad melting range from 120° to 210°C indicate the presence of crystallites of widely different degrees of perfection. Crystallization kinetics from the quenched glassy state indicate that time-temperature superposition applies with an activation energy of 90 kcal/mole. Molecular mobility is indicated as the rate-controlling mechanism.     

Raman spectroscopy of conducting poly (methyl methacrylate)/polyaniline dodecylbenzenesulfonate blends

Polyaniline soluble in organic solvents was prepared using dodecylbenzenesulphonic acid (DBSA) as functional dopant. The solubility parameter was calculated and the most suitable solvent chloroform was checked for the solubility and the most compatible polymer PMMA was selected for blending. Miscibility was maximized with 1% by weight of hydroquinone. Blending of doped polyaniline with dodecylbenzenesulphonic acid (PAni.DBSA) in poly (methyl methacrylate) (PMMA) was explained by a change in the conformation of the polymeric chains leading to an increase in the conductivity. The electrical conductivity increased as the weight percent of PAni.DBSA increased, showing a percolation threshold as low as 3.0% by weight and the highest conductivity was achieved at 20% by wt of PAni.DBSA. Scanning electron micrographs showed lowest level of phase separation. Raman spectroscopy is used to characterize the blending process of two polymers aiming to understand the transformations in different types of charged segments. Raman results give complementary data about the blending process showing that together with the structural change of the polymeric chains, there is also a chemical transformation of these polymers. Analysis of Raman spectra was done investigating the relative intensities of the bands at 574 cm⁻¹ and 607 cm⁻¹. A relationship between conductivity and Raman was also proposed. Copyright © 2009 John Wiley & Sons, Ltd.     

Proton conducting polymer electrolytes on the basis of poly(vinylphosphonic acid) and imidazole

Anhydrous proton conducting polymer electrolytes have been prepared by doping of poly(vinylphosphonic acid) (PVPA) with imidazole (Im) in with various stoichiometric ratios, x, to form PVPA x Im where x is the number of moles of Im per moles of polymer repeat unit. Polymer electrolytes, PVPA x Im (with x=0.5, x=1 and x=2) can be cast into transparent, homogeneous films. FT-IR results indicate the transfer of acidic protons to imidazole units to form imidazolium ions. Thermogravimetric analysis illustrates that these blends are thermally stable up to about 150 °C. The glass transition temperatures of the blends were detected via differential scanning calorimetry. DC conductivity increases with doping ratio of Im reaching ∼5×10⁻³ S/cm for x=2 at 130 °C.     

Conductivity, dielectric behaviour and thermal stability studies of lithium ion dissociation in poly(methyl methacrylate)-based gel polymer electrolytes

Thin films of poly(methyl methacrylate) (PMMA) with lithium triflate (LiCF₃SO₃) were prepared by using the solution-casting method with PMMA as the host polymer. Ionic conductivity and dielectric measurements were carried out on these films. The highest conductivity for polymer electrolyte with a ratio of 65:35 was found to be 9.88 × 10⁻⁵ S cm⁻¹, which is suitable for the production of mobile phone battery. Thermal gravimetric analysis was carried out to evaluate the thermal stability of the polymer electrolyte. The addition of salts will increase thermal stability of the polymer electrolyte.     

Vibrational and impedance spectroscopic analysis of poly(vinyl alcohol)-based solid polymer electrolytes

Solid polymer electrolytes based on poly(vinyl alcohol) (PVA) doped with NH₄Br have been prepared by the solution-casting method. The complex formation between the polymer and the salt has been confirmed by Fourier transform infrared spectroscopy. The highest conductivity at 303 K has been found to be of the order of 10⁻⁴ Scm⁻¹ for 25 mol% NH₄Br-doped PVA system. The ionic transference number of polymer electrolyte has been estimated by Wagner’s polarization method, and the results reveal that the conducting species are predominantly ions. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Alkaline poly(vinyl alcohol)/poly(acrylic acid) polymer electrolyte membrane for Ni-MH battery application

Ionics - Alkaline polymer electrolyte membrane with high ionic conductivity of 0.019&nbsp;S&nbsp;cm−1 at room temperature was prepared from poly(vinyl alcohol) and acrylic acid...     

Infrared spectroscopic and conductivity studies of poly(N-methylpropylenimine)/lithium triflate electrolytes

Poly(propylenimine), PPI, was methylated using Eschweiler-Clark conditions to produce poly(N-methylpropylenimine), PMPI. Differences may be seen in the IR spectra of the PMPI (–CH₂CH₂CH₂NCH₃–) and its homolog poly(N-methylethylenimine), PMEI, (–CH₂CH₂NCH₃–), especially in the conformation region (~ 1100 to ~ 1400 cm^− 1). The addition of lithium trifluoromethanesulfonate, (LiCF₃SO₃), sharpens the distinctions between these systems. Comparison of IR spectra of polymer:LiCF₃SO₃ complexes at compositions ranging from pure polymer to 5:1 N:Li⁺ (molar ratio) suggests significant differences in the nature of polymer salt interactions and the complex structure present in each system. These are further evidenced by differential scanning calorimetry data in which PMPI displays less variation in glass transition temperature, T_g, with the addition of salt than seen in PMEI. These observations may be interpreted in terms of local structural changes originating in cation–anion and cation–polymer interactions, particularly at mid to high salt concentrations.     

Atomic force microscopy enabled roughness analysis of nanostructured poly (diaminonaphthalene) doped poly (vinyl alcohol) conducting polymer thin films

The Atomic Force Microscopy (AFM) helps in evaluating parameters like amplitude or height parameters, functional or statistical parameters and spatial parameters which describe the surface topography or the roughness. In this paper, we have evaluated the roughness parameters for the native poly (vinyl alcohol) (PVA), monomer diaminonaphthalene (DAN) doped PVA, and poly (diaminonaphthalene) (PDAN) doped PVA films prepared in different solvents. In addition, distribution of heights, skewness and Kurtosis moments which describe surface asymmetry and flatness properties of a film were also determined. At the same time line profiles, 3D and 2D images of the surface structures at different scanning areas i.e. 5 × 5 μm² and 10 × 10 μm² were also investigated. From the roughness analysis and the surface skewness and coefficient of Kurtosis parameters, it was concluded that for PVA film the surface contains more peaks than valleys and the PDAN doped PVA film has more valleys than peaks. It was also found that the PDAN doped PVA film with acetonitrile solvent was used for substrate in electronics applications because the film gives less fractal morphology. Thus, the AFM analysis with different parameters suggested that the PDAN doped PVA films are smooth at the sub-nanometer scale.     

Structural and ionic conductivity studies of solid polymer electrolytes based on poly (vinylchloride) and poly (methylmethacrylate) blends

Thin film of poly (vinylchloride) and poly (methylmethacrylate) blend polymer electrolytes plasticized with a combination of DBP and Li₂SO₄ salts have been prepared by solution casting technique. The prepared films were subjected to a.c. impedance measurements as a function of temperature ranging from 304–373 K. The maximum conductivity at 304 K was found to be 1.24 × 10⁻⁸ S·cm⁻¹ for PVC-PMMA-Li₂SO₄-DBP (7.5-17.5-5-70 mole-%). Temperature dependence studies on the ionic conductivity in the PVC-PMMA-Li₂SO₄-DBP system suggest that the ion conduction follows the Williams-Landel-Ferry (WLF) mechanism, which is further confirmed by Vogel-Tamman-Fulcher (VTF) plots. XRD, FTIR, SEM and thermal studies revealed complex formation in.     

The effect of electric field stress on pure poly(vinyl chloride), poly(methyl methacrylate) and their polyblend samples

The TSDC and transient currents measurement have been carried out on pure poly(vinyl chloride), poly(methyl methacrylate) and polyblends of various weight ratios as a function of electric fields at constant poling temperature. For PVC and different blend samples single peak in the temperature range 100–170 °C has been observed in TSDC thermograms, however, for PMMA samples two peaks were observed at around 90 and 165 °C. The various TSDC parameters i.e. activation energy, charge released and relaxation times have been calculated. Results suggest that dipolar and space charge mechanism are dominant for observed current.     

Electrical and structural properties of poly (ethylene oxide)/silver triflate polymer electrolyte system dispersed with MgO nanofillers

Solvent-free films of poly (ethylene oxide)–silver triflate (PEO–AgCF₃SO₃)/MgO-based nanocomposite polymer electrolytes (PEO)₅₀AgCF₃SO₃–x wt.% MgO (x = 1, 3, 5, 7, and 10) obtained using solution casting technique were found to exhibit an appreciably good complexation of MgO nanofiller within the polymer electrolyte system and non-Debye type of relaxation as revealed by Fourier transform infrared and complex impedance analyses. Optimized filler (5 wt.% MgO) when incorporated into the polymer electrolyte resulted in a maximum electrical conductivity of 2 × 10⁻⁶ S cm⁻¹ in conjunction with a silver ionic transference number (t _Ag+) of 0.23 at room temperature (298 K). Detailed structural, thermal, and surface morphological investigation indicated a slight reduction in the degree of crystallinity owing to the addition of MgO nanofiller.     

Characterization of poly(vinyl chloride): Abstract

Since the first International Symposium in 1970, studies on the characterization of PVC have mainly dealt with three topics: existence of supermolecular aggregates which a r e considered responsible for numerous thermornechanical and rheological properties of PVC; tacticity and chain defects which could alter the thermal sensitivity of PVC to processing conditions; morphology of the powder which is of paramount importance for the processability of the polymer.     

Impedance spectroscopy studies of poly (methyl methacrylate)-lithium salts polymer electrolyte systems

In the present work, five systems of samples have been prepared by the solution casting technique. These are the plasticized poly(methyl methacrylate) (PMMA-EC) system, the LiCF₃SO₃ salted-poly(methyl methacrylate) (PMMA-LiCF₃SO₃) system, the LiBF₄ salted-poly(methyl methacrylate) (PMMA-LiBF₄) system, the LiCF₃SO₃ salted-poly(methyl methacrylate) containing a fixed amount of plasticizer ([PMMA-EC]-LiCF₃SO₃) system, and the LiBF₄ salted-poly(methyl methacrylate) containing a fixed amount of plasticizer ([PMMA-EC]-LiBF₄) system. The conductivities of the films from each system are characterized by impedance spectroscopy. The room temperature conductivity in the pure PMMA sample and (PMMA-EC) system is 8.57 × 10⁻¹³ and 2.71 × 10⁻¹¹ S cm⁻¹, respectively. The room conductivity for the highest conducting sample in the (PMMA-LiCF₃SO₃), (PMMA-LiBF₄), ([PMMA-EC]-LiCF₃SO₃), and ([PMMA-EC]-LiBF₄) systems is 3.97 × 10⁻⁶, 3.66 × 10⁻⁷, 3.40 × 10⁻⁵, and 4.07 × 10⁻⁷ S cm⁻¹, respectively. The increase in conductivity is due to the increase in number of mobile ions, and decrease in conductivity is attributed to ion association. The increase and decrease in the number of ions can be implied from the dielectric constant, ɛ_r-frequency plots. The conductivity–temperature studies are carried out in the temperature range between 303 and 373 K. The results show that the conductivity is increased when the temperature is increased and obeys Arrhenius rule. The plots of loss tangent against temperature at a fixed frequency have showed a peak at 333 K for the ([PMMA-EC]-LiBF₄) system and a peak at 363 K for the ([PMM-EC]-LiCF₃SO₃) system. This peak could be attributed to β-relaxation, as the measurements were not carried out up to glass transition temperature, T _g. It may be inferred that the plasticizer EC has dissociated more LiCF₃SO₃ than LiBF₄ and shifted the loss tangent peak to a higher temperature. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

Impedance spectroscopic studies on a binary salt poly (vinyl chloride) based electrolyte

Polymer electrolyte membranes comprising poly vinyl chloride (PVC), lithium triflate (LiCF₃SO₃) and lithium hexafluorophosphate (LiPF₆) were prepared using the solution-cast method. Impedance spectroscopy of these films was performed in the frequency range between 40 Hz to 1000 kHz at room temperature. X-ray diffraction studies indicate that complexation has taken place mainly in the amorphous phase. Further impedance spectroscopy response quantities such as complex dielectric constant and dielectric moduli were computed from the complex impedance. Conductivity dependence on temperature was studied for several films and the results are discussed.     

Electrical and electrochemical properties of poly (methyl methacrylate) based nanocomposite gel electrolytes dispersed with dedoped (insulating) polyaniline nanofibers

In this work, we have investigated the effect of dedoped (insulating) polyaniline (PAni) nanofibers on the electrical and electrochemical properties of poly(methyl methacrylate) (PMMA)-based gel electrolytes. PAni nanofibers have been synthesized using interfacial polymerization technique. By analysis of X-ray diffraction (XRD) and impedance spectroscopy results, it has been demonstrated that the incorporation of dedoped PAni nanofibers up to a moderate concentration (4 wt%) to PMMA–(PC?+?DEC)–LiClO₄ gel polymer electrolyte system significantly enhances the ionic conductivity of the electrolyte system, which can be attributed to the inhibition of polymer chain reorganization upon dispersion of high aspect ratio nanofibers in PMMA matrix resulting in reduction in polymer crystallinity, which gives rise to an increase in ionic conductivity. At higher concentration, dedoped nanofibers appear to get phase separated and form insulating clusters, which impede ionic transport. The phase separation phenomena at higher fraction of nanofibers are confirmed by XRD. Studies on electrochemical behavior reveal that electrochemical potential window increases with the increase of nanofibers loading.