Electrical,optical, and structural characterization of polymer blend (PVC/PMMA) electrolyte films

Ion-conducting solid polymer blend electrolytes based on polyvinyl chloride (PVC)/poly methyl methacrylate (PMMA) complexed with sodium perchlorate (NaClO₄) were prepared in various concentrations by solution cast technique. The features of complexation of the electrolytes were studied by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. DC conductivity of the films was measured in the temperature range 303–398 K. Transference number measurements were carried out to investigate the nature of charge transport in the polymer blend electrolyte system. The electrical conductivity increased with increasing dopant concentration, which is attributed to the formation of charge transfer complexes. The polymer complexes exhibited Arrhenius type dependence of conductivity with temperature. In the temperature range studied, two regions with different activation energies were observed. Transference number data showed that the charge transport in this system is predominantly due to ions. Optical properties like absorption edge, direct band gap, and indirect band gap were estimated for pure and doped films from their optical absorption spectra in the wavelength region 200–600 nm. It was found that the energy gap and band edge values shifted to lower energies on doping with NaClO₄ salt. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamil Nadu, India, Dec. 7–9, 2006.     

Structural and ionic conductivity of PEO blend PEG solid polymer electrolyte

Structural and ionic conductivity of PEO blend PEG with KI solid polymer electrolyte system is presented. The polymer PEG showed miscible with the high molecular weight polymer PEO. The X-ray diffraction patterns of PEO/PEG with KI salt indicated the decrease in the degree of crystallinity with increasing concentration of the salt. The DSC measurements of PEO/PEG:KI polymer electrolyte system showed that the melting temperature is shifted towards the lower temperature with increase of the salt concentration. Optical micrographs demonstrated that the spherulites of different sizes are present along with dark regions between the spherulites for lower salt compositions. With increase of salt concentration more amorphous regions are observed. The significance of blend is the increase of one order in ionic conductivity when compared to without blend PEO electrolyte.     

Preparation of modified polymer blend and electrical performance

In this study, a modified binary polymer blend made up of polycarbonate and polystyrene blend has been prepared by loading of aluminum oxide (Al₂O₃) as a dopant. The role of alumina with polymer blend system was addressed in view of interfacing criteria. The filler concentration of modified blend was taken as 5, 10, and 15%. The morphological, thermal, and electrical properties were characterized by various techniques. Optical microscopy confirms the homogenous dispersion of Al₂O₃ in blend. The presence of alumina was detected by subatomic level using atomic force microscope (both two and three dimensional approach). The differential scanning calorimetric thermographs demonstrate decreasing softing point as function of alumina loading. The dielectric properties such as dielectric constant, loss, and electrical modulus were studied under DC bias. The effect of DC bias exhibits significant changes at low amount of Al₂O₃. The dielectric polarization supports Maxwell Wagner (MW) theory due to low frequency response. 15% Al₂O₃ gives the highest dielectric constant (ε′) value (3.5?×?10⁵) at 10 Hz. The polymer modified blend with Al₂O₃ may be used as a one of the best dielectric medium.     

Proton-conducting polymer electrolyte based on PVA-PAN blend doped with ammonium thiocyanate

Blending of polymers is one of the most useful methods for modulating the conductivity of solid polymer electrolytes. Blend polymer electrolytes have been prepared with polyvinyl alcohol (PVA)-polyacrylonitrile (PAN) blend doped with ammonium thiocyanate with different concentrations by solution casting technique, using dimethyl formamide (DMF) as the solvent. The prepared electrolytes are characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), ultraviolet (UV), and ac impedance measurement techniques. The increase in amorphous nature of the blend polymer electrolyte by the addition of salt is confirmed by XRD analysis. The complex formation between the polymers and the salt has been confirmed by FTIR analysis. The thermal behavior has been examined using DSC and TGA. The maximum conductivity has been found to be 2.4?×?10^?3 S cm^?1 for 92.5PVA/7.5PAN/25 % NH₄SCN sample at room temperature. The temperature dependence of conductivity has been studied with the help of Arrhenius plot, and the activation energies are calculated. The proton conductivity is confirmed by dc polarization measurement technique. ¹H NMR studies reveal the presence of protons in the sample. A proton battery is constructed with the highest conducting sample, and its open circuit voltage is measured to be 1.2 V     

Electrical conductivity studies on PVA/PVP-KOH alkaline solid polymer blend electrolyte

A series of conducting thin-film solid electrolytes based on poly (vinyl alcohol)/ poly (vinyl pyrrolidone) (PVA/PVP) polymer blend was prepared by the solution casting technique. PVA and PVP were mixed in various weight percent ratios and dissolved in 20 ml of distilled water. The samples were analyzed by using impedance spectroscopy in the frequency range between 100 Hz and 1 MHz. The PVA/PVP system with a composition of 80% PVA and 20 wt.% PVP exhibits the highest conductivity of (2.2±1.4) × 10⁻⁷ Scm⁻¹. The highest conducting PVA/PVP blend was then further studied by adding different amounts of potassium hydroxide (KOH) ionic dopant. Water has been used as solvent to prepare PVA/PVP-KOH based alkaline solid polymer blend electrolyte films. The conductivity was enhanced to (1.5 ± 1.1) × 10⁻⁴ Scm⁻¹ when 40 wt.% KOH was added. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Investigations on PMMA-PVdF polymer blend electrolyte with esters of dibenzoic acids as plasticizers

Plasticizers can be used to change the electrical and mechanical properties of polymer electrolytes by reducing the degree of crystallinity and lowering the glass transition temperature. The transport properties of gel type ionic conducting membranes consisting of poly (methyl methacrylate) (PMMA), poly (vinylidene fluriode) (PVdF), Lithium perchlorate (LiClO₄) and dioctyl phthalate (DOP), dibutyl phthalate (DBP), dimethyl phthalate (DMP) or diethyl phthalate (DEP) were studied. The polymer films were characterized by X-ray diffraction, Thermal, Fourier transform infrared and impedance spectroscopic studies. It is found that the addition of DMP as the plasticizer in the PMMA / PVdF-LiClO₄ polymer complex favours an enhancement in ionic conductivity. The temperature dependence of the conductivity of the polymer films seems to obey the VTF relation. The conductivity values are presented and the results are discussed.     

Structural, vibrational and electrical characterization of PVA-NH4Br polymer electrolyte system

Polymer electrolyte based on PVA doped with different concentrations of NH₄Br has been prepared by solution casting technique. The complexation of the prepared polymer electrolytes has been studied using X-ray diffraction (XRD) and Fourier transform infra red (FTIR) spectroscopy. The maximum ionic conductivity (5.7×10⁻⁴ S cm⁻¹) has been obtained for 25 mol% NH₄Br-doped PVA polymer electrolyte. The temperature dependence of ionic conductivity of the prepared polymer electrolytes obeys Arrhenius law. The ionic transference number of mobile ions has been estimated by dc polarization method and the results reveal that the conducting species are predominantly ions. The dielectric behavior of the polymer electrolytes has been analyzed using dielectric permittivity and electric modulus spectra.     

Ionic conductivity studies in PMMA/PVdF polymer blend electrolyte with lithium salts

Batteries using ionically conducting polymer membranes as electrolytes are very attractive, since the concept of power sources capable of combining a high energy content with plasticity is very appealing for the consumer electronics market and in electric vehicle applications. Blend based polymer electrolytes composed of poly (methylmethacrylate) (PMMA), Poly Vinylidene fluoride (PVdF), Lithium salt (LiX) (X=ClO₄, BF₄ and CF₃SO₃) and Dimethyl Phthalate (DMP) are prepared using solvent casting technique. The films have been characterized using XRD, FTIR, Thermal and SEM studies; the effect of complexing salt and temperature on ionic conductivity is also discussed. The maximum conductivity value obtained for the solid polymer electrolyte film at 303 K is 4.2 × 10⁻³ S/cm.     

Thermal patterning of a critical polymer blend

Utilizing the Soret effect, we have employed a moderately focused laser beam (30 microm, 20 mW) to write spatial composition patterns into layers of the critical polymer blend poly(dimethyl siloxane)/poly(ethyl-methyl siloxane) (PDMS/PEMS, M(w)=16.4/22.8 kg/mol) both in the one- and in the two-phase region a few degrees above and below the critical temperature T(c)=37.7 degrees C. Because of the critical divergence of the Soret coefficient, moderate temperature gradients are sufficient to induce composition modulations of large amplitude. In the two-phase regime the spinodal demixing pattern can be locally manipulated in a controlled way. 2D simulations based on a modified Cahn-Hilliard equation are able to reproduce the essential spatial and temporal features observed in the experiments.     

Magnesium ion conducting solid polymer blend electrolyte based on biodegradable polymers and application in solid-state batteries

Ionics - Magnesium ion conducting solid polymer blend electrolyte based on biodegradable polymers polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) mixed with different molecular weight...     

New polymer electrolyte based on (PVA–PAN) blend for Li-ion battery applications

A polymer blend electrolyte based on polyvinyl alcohol (PVA) and polyacrylonitrile (PAN) was prepared by a simple solvent casting technique in different compositions. The ionic conductivity of polymer blend electrolytes was investigated by varying the PAN content in the PVA matrix. The ionic conductivity of polymer blend electrolyte increased with the increase of PAN content. The effect of lithium salt concentrations was also studied for the polymer blend electrolyte of high ionic conductivity system. A maximum ionic conductivity of 3.76×10⁻³ S/cm was obtained in 3 M LiClO₄ electrolyte solution. The effect of ionic conductivity of polymer blend electrolyte was measured by varying the temperature ranging from 298 to 353 K. Linear sweep voltammetry and DC polarization studies were carried out to find out the stability and lithium transference number of the polymer blend electrolyte. Finally, a prototype cell was assembled with graphite as anode, LiMn₂O₄ as cathode, and polymer blend electrolyte as the electrolyte as well as separator, which showed good compatibility and electrochemical stability up to 4.7 V.     

Preparation and characterization of blend polymer electrolyte film based on poly(vinyl alcohol)-poly(acrylonitrile)/MgCl<Subscript>2</Subscript> for energy storage devices

The development of magnesium electrolytes for battery applications has been the demand for electrochemical devices. To meet such demand, in this work solid blend polymer electrolytes were prepared using polyvinyl alcohol (PVA) and polyacrylonitrile (PAN) (92.5PVA:7.5PAN) as host polymer, magnesium chloride (MgCl₂) of different molar mass percentage (m.m.%) (0.1, 0.2, 0.3, 0.4, 0.5, and 0.6%) as salt and dimethylformamide (DMF) as solvent. Structural, vibrational, thermal, electrical, and electrochemical properties of the prepared electrolytes were investigated using different techniques such as X-ray diffraction pattern, FTIR spectroscopy analysis, differential scanning calorimetry (DSC), AC impedance measurement, and transference number measurement. X-ray diffraction studies confirm the minimum volume fraction of crystalline phase for the polymer electrolyte with 0.5 m.m.% of MgCl₂. FTIR confirms the complex formation between host polymer and salt. DSC analysis proves the thermal transition of the prepared films are affected by salt concentration. The optimized material with 0.5 m.m.% of MgCl₂ offers a maximum electrical conductivity of 1.01 × 10^?3 S cm^?1 at room temperature. The Mg²⁺ ion conduction in the blend polymer electrolyte is confirmed from transference number measurement. Electrochemical analysis demonstrates the promising characteristic of these polymer films suitable as electrolytes for primary magnesium batteries. Output potential and discharge characteristics have been analyzed for primary magnesium battery which is constructed using optimized conducting electrolyte.     

Electrochemical characterization of a composite polymer electrolyte with improved lithium metal electrode interfacial properties

In the development of rechargeable lithium polymer batteries it is of paramount importance to control the passivation phenomena occurring at the lithium electrode interface. It is well estabilished that the type and the growth of the lithium passivation layer is unpredictably influenced by the presence of liquid components and/or impurities in the electrolyte. Therefore, one approach to improve the stability of the lithium interface is the use of liquid-free, highly pure electrolytes. The electrochemical properties of a composite polymer electrolyte obtained by hot pressing a mixture of polyethylene oxide (PEO), a lithium salt (lithium tetrafluoroborate, LiBF₄) and a powdered ceramic additive (γ-LiAlO₂), will be presented and discussed. The electrochemical characterization included the determination of the ionic conductivity, the anodic break-down voltage and, most importantly, the stability of the lithium metal electrode interface and the lithium stripping-plating process efficiency. The main feature of this dry, true solid-state electrolyte is a very good compatibility with the lithium metal electrode, demonstrated by a very high lithium cycling efficiency, which approaches a value of 99%. Paper presented at the 5th Euroconference on Solid State Ionics, Benalmádena, Spain, Sept. 13–20, 1998.     

Discharge characteristics of polymer blend (PVP/PVA) electrolyte films doped with potassium bromide

Solid polymer blend electrolyte films based on PVP/PVA complexed with KBr were prepared by the solution cast technique. Various experimental techniques such as electrical conductivity and transport number measurement were used to characterize the polymer electrolyte films. Electrochemical cells with the polymer electrolytes (PVP + PVA + KBr) were fabricated in the configuration K / (PVP + PVA + KBr) / (I₂ + C + electrode). The discharge characteristics of the cells were studied under a constant load of 100 KΩ. The open-circuit voltage, short-circuit current, and discharge time for the plateau region are measured. Several other cell parameters were evaluated and are reported.     

Electrochemical synthesis and characterization of a new conducting polymer: Polyrhodanine

An antimicrobial drug, rhodanine (Rh), was electrochemically polymerized on a Pt electrode using cyclic voltammetry (CV). The high quality and homogeneous polyrhodanine (pRh) films with a dark-purple color were obtained. The chemical structure characterization was investigated by Fourier transform infrared spectroscopy (FTIR) and UV-vis spectroscopy techniques. Further, thermogravimetric analysis (TGA) and differential thermal analysis (DTA) techniques used to investigate thermal properties of the film. It is found that thermal stability of pRh films is relatively high. It is also observed that tetrahydrofurane (THF) and N-methyl-2-pyrrolidone (NMP) are good solvents for the polymer.     

Efficient polymer white-light-emitting diodes with a single-emission layer of fluorescent polymer blend

Efficient polymer white-light-emitting diodes (WPLEDs) have been fabricated with a single layer of fluorescent polymer blend. The device structure consists of ITO/PEDOT/PVK/emissive layer/Ba/Al. The emissive layer is a blend of poly(9,9-dioctylfluorene) (PFO), phenyl-substituted PPV derivative (P-PPV) and a copolymer of 9,9-dioctylfluorene and 4,7-di(4-hexylthien-2-yl)-2,1,3-benzothiadiazole (PFO-DHTBT), which, respectively, emits blue, green and red light. The emission of pure and efficient white light was implemented by tuning the blend weight ratio of PFO: P-PPV: PFO-DHTBT to 96:4:0.4. The maximum current efficiency and luminance are, respectively, 7.6 cd/A at 6.7 V and 11930 cd/m² at 11.2 V. The CIE coordinates of white-light emission were stable with the drive voltages.     

Preparation and characterizations of PVAc/P(VdF-HFP)-based polymer blend electrolytes

A novel group of polymer blend electrolytes based on the mixture of poly(vinyl acetate) (PVAc), poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), and the lithium salt (LiClO₄) are prepared by solvent casting technique. Ionic conductivity of the polymer blend electrolytes has been investigated by varying the PVAc and PVdF-HFP content in the polymer matrix. The maximum ionic conductivity has been obtained as 0.527 × 10⁻⁴ Scm⁻¹ at 303 K for PVAc/PVdF-HFP ((25/75) wt.%)/LiClO₄ (8 wt.%). The complex formations ascertained from XRD and FTIR spectroscopic techniques and the thermal behavior of the prepared samples has been performed by DSC analysis. The surface morphology and the surface roughness are studied using SEM and AFM scanning techniques respectively.     

Synthesis and characterization of proton-conducting polymer electrolyte based on polyacrylonitrile (PAN)

Solid polymer electrolytes based on polyacrylonitrile (PAN) doped with ammonium iodide (NH₄I) have been prepared by solution casting method with different molar ratios of polymer and salt using DMF as solvent. The XRD pattern confirms the dissociation of salt. The FTIR analysis confirms the complex formation between the polymer and the salt. A shift in glass transition temperature (T _g ) of the PAN/NH₄I electrolytes has been observed from the DSC thermograms, which indicates the interaction between the polymer and the salt. The conductivity analysis shows that the polymer electrolyte with 20 mol% NH₄I has the highest conductivity equal to 1.106 × 10⁻³ S cm⁻¹ at room temperature. The activation energy (E _a ) has been found to be low for the highest conductivity sample. The dielectric permittivity (ε*) and modulus (M*) have been calculated from the alternating current (AC) impedance spectroscopy in the frequency range 42 Hz–1 MHz. The DC polarization measurement shows that the conductivity is mainly due to ions.

     

Preparation and characterization of Ag nanoparticle-embedded polymer electrospun nanofibers

Poly (vinyl alcohol) (PVA) and poly (vinyl pyrrolidone) (PVP) nanofibers embedding Ag nanoparticles (5–18 nm) have been prepared successfully by electrospinning at room temperature. Scanning electron microscope (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), Fourier transform IR spectra (FTIR), and Raman scattering were used to characterize the structure and properties of Ag nanoparticle-embedded PVA and PVP nanofibers before and after heat treatment at different temperature. The antibacterial activity of Ag nanoparticle-embedded PVP nanofibers after heat treatment was also tested, which indicated that the biological activity of yeast cells was effectively inhibited by these Ag nanoparticle-embedded PVP nanofibers.