Adsorption‐Induced Restructuring and Early Stages of Carbon‐Nanotube Growth on Ni Nanoparticles

Carbon adsorption on various Ni surfaces is investigated as a function of coverage via a combination of first‐principles simulations and field emission microscope experiments. It is found that carbon can be efficiently stored as subsurface carbides, but with different energetics on differently oriented surfaces depending on their compactness and density of adsorption sites. In the resulting morphological reshaping, {113} facets are predicted to grow at the expense of {111} and {100} facets, in excellent agreement with experimental observations. Moreover, at high coverage on the {113} surface the carbon adsorption energy passes through a maximum after which a structural crossover is realized such that carbon atoms tend to ascend to the surface to form one‐dimensional chains (which are the precursors of graphitic nanostructures). This rationalizes the experimental observation of an incubation time between carbon storage and the beginning of catalytic growth, and provides insight into the early stages (nucleation mechanism) of carbon nanotubes on Ni nanoparticles.     

Adsorption model of atomic hydrogen on the surfaces of carbon nanotubes

A model for the adsorption of atomic hydrogen on the surfaces of single-walled zig-zag and armchair carbon nanotubes is constructed on the basis of the single-impurity periodic Anderson model. Features of the bands caused by the adsorption of hydrogen atoms in the structure of carbon nanotubes are studied. A reduction in the forbidden gap as a result of adsorption is revealed, and its dependence on the diameter of the semiconducting nanotubes is established. It is concluded that the model can be used to study the adsorption of other monovalent atoms on the surfaces of carbon particles.     

Electrocatalytic oxidation of ethylene glycol on Pt and Pt-Ru nanoparticles modified multi-walled carbon nanotubes

The synthesis and characterization of catalysts based on nanomaterials, supported on multi-walled carbon nanotubes (CNT) for ethylene glycol (EG) oxidation is investigated. Platinum (Pt) and platinum-ruthenium (Pt-Ru) nanoparticles are deposited on surface-oxidized multi-walled carbon nanotubes [Pt/CNT; Pt-Ru/CNT] by the aqueous solution reduction of the corresponding metal salts with glycerol. The electrocatalytic properties of the modified electrodes for oxidation of ethylene glycol in acidic solution have been studied by cyclic voltammetry (CV), and excellent activity is observed. This may be attributed to the small particle size of the metal nanoparticles, the efficacy of carbon nanotubes acting as good catalyst support and uniform dispersion of nanoparticles on CNT surfaces. The nature of the resulting nanoparticles decorated multiwalled carbon nanotubes are characterized by scanning electron microscopy (SEM) and transmission electron microscopic (TEM) analysis. The cyclic voltammetry response indicates that Pt-Ru/CNT catalyst displays a higher performance than Pt/CNT, which may be due to the efficiency of the nature of Ru species in Pt-Ru systems. The fabricated Pt and Pt-Ru nanoparticles decorated CNT electrodes shows better catalytic performance towards ethylene glycol oxidation than the corresponding nanoparticles decorated carbon electrodes, demonstrating that it is more promising for use in fuel cells.     

Structural characterization of single-walled carbon nanotube bundles by experiment and molecular simulation

A procedure, combining molecular simulation, Raman spectroscopy, and standard nitrogen adsorption, is developed for structural characterization of single-walled carbon nanotube (SWNT) samples. Grand canonical Monte Carlo simulations of nitrogen adsorption are performed on the external and internal adsorption sites of homogeneous arrays of SWNTs of diameters previously determined by Raman spectroscopy of the sample. The results show the importance of the peripheral grooves of a nanotube bundle at low relative pressure and the insensitivity of nanotube diameter toward adsorption on the external surface of the bundle at higher pressures. Simulations also reveal that samples containing thin nanotubes have less internal adsorption capacity that saturates at lower pressure than those comprising large diameter nanotubes. The fraction of open-ended nanotubes in a sample can be estimated by scaling the simulated internal adsorption inside nanotubes to obtain a near perfect fit between simulated and experimental isotherms. This procedure allows extrapolation of adsorption properties to conditions in which all nanotubes in the sample are open-ended.     

Water-induced interactions between carbon nanoparticles

Molecular dynamics simulations were carried out in order to study the hydration of C60 fullerenes, carbon nanotubes, and graphene sheets in aqueous solution and the nature of water-induced interactions between these carbon nanoparticles. The hydration of these nonpolar carbon nanoparticles does not exhibit classical hydrophobic character due to the high density of surface atoms (carbon) resulting in strong water-surface dispersion interactions. Water was found to wet the nanoparticle surfaces independent of nanoparticle surface curvature, with the decrease in the extent of water-water hydrogen bonding with decreasing surface curvature being offset by stronger water-surface interactions. While all carbon nanoparticles investigated are anticipated to aggregate in water due to strong direct nanoparticle-nanoparticle interactions, the water-induced interactions between nanoparticles were found to be repulsive and, in contrast to the wetting behavior, were observed to exhibit strong dependence on surface curvature. The strength of the water-induced interaction between carbon nanoparticles was found to correlate well with the number of hydration water molecules displaced upon particle aggregation, which, relative to the amount of direct nanoparticle-nanoparticle contact engendered upon aggregation, decreases with decreasing surface curvature.     

Can chiral single walled carbon nanotubes be used as enantiospecific adsorbents?

Single-walled carbon nanotubes can exist in chiral forms and can adsorb a range of molecules. We use atomistic simulations to consider whether enantiopure carbon nanotubes might be effective enantiospecific adsorbents for chiral molecules. We examine the adsorption of both enantiomers of trans-1,2-dimethylcyclopropane and trans-1,2-dimethylcyclohexane in a range of chiral nanotubes. Our simulations indicate that these molecules are strongly adsorbed in nanotubes, that is, they have large heats of adsorption, but the energy differences between adsorbed enantiomers are negligible. We argue that this result is generic for chiral organic molecules adsorbed in carbon nanotubes, suggesting that these materials will not be effective enantiospecific adsorbents.     

Molecular perspective on diazonium adsorption for controllable functionalization of single-walled carbon nanotubes in aqueous surfactant solutions

Functionalization of single-walled carbon nanotubes (SWCNTs) using diazonium salts allows modification of their optical and electronic properties for a variety of applications, ranging from drug-delivery vehicles to molecular sensors. However, control of the functionalization process remains a challenge, requiring molecular-level understanding of the adsorption of diazonium ions onto heterogeneous, charge-mobile SWCNT surfaces, which are typically decorated with surfactants. In this paper, we combine molecular dynamics (MD) simulations, experiments, and equilibrium reaction modeling to understand and model the extent of diazonium functionalization of SWCNTs coated with various surfactants (sodium cholate, sodium dodecyl sulfate, and cetyl trimethylammonium bromide). We show that the free energy of diazonium adsorption, determined using simulations, can be used to rank surfactants in terms of the extent of functionalization attained following their adsorption on the nanotube surface. The difference in binding affinities between linear and rigid surfactants is attributed to the synergistic binding of the diazonium ion to the local "hot/cold spots" formed by the charged surfactant heads. A combined simulation-modeling framework is developed to provide guidance for controlling the various sensitive experimental conditions needed to achieve the desired extent of SWCNT functionalization.     

Chitosan-mediated synthesis of carbon nanotube-gold nanohybrids

Metal-nanotube nanohybrids were produced by in situ synthesis and stabilization of gold nanoparticles on chitosan-functionalized carbon nanotubes. The formation of gold nanoparticles from tetrachloroauric acid was observed after only a few minutes of contact with the functionalized nanotubes, at room temperature. These results suggest that adsorption of chitosan at the surface of carbon nanotubes permits smooth reduction of the metallic salt and efficient anchoring of gold nanoparticles to the nanotubes.

     

Effect of chemical potential on the computer simulation of hydrogen storage in single walled carbon nanotubes

Hydrogen is a kind of clean, sustainable and renewable energy carrier. Of the problems to be solved for the utilization of hydrogen energy, how to store and transport hydrogen has been given high priority on the research agenda. Recently, carbon nanotubes (CNTs) were reported to be very promising candidates for hydrogen uptake[1], which may have possibility to satisfy the benchmark set by the US Department of Energy (DOE) Hydrogen Plan for fuel cell powered vehicles: a gravimetric density …     

Thermal stability and reactivity of metal halide filled single-walled carbon nanotubes

Thermal stability and reactivity to oxidation of several nanocomposite systems obtained by encapsulation of metal halides in single-walled carbon nanotubes are studied. Thermogravimetric analysis coupled with Raman spectroscopy allows insight into the various contributing factors, such as charge transfer, strain, and defect formation, and establishing a hierarchy of reactivity for the systems studied (AgX@SWCNTs, with X = Br, I; SWCNTs = arc discharge and HiPCO). The activation energy for oxidation decreases considerably after filling, indicating that filled nanotubes are more amenable to controlled modifications based on chemical reactivity than the originating empty nanotubes. The complete removal of the carbon shell at high temperatures does not preserve the nanowire morphology of the encapsulated halides; these are freed on surfaces in the form of nanoparticles arranged in 1D patterns. Metallic nanoparticles were obtained after hydrogen reduction of the halides, and growth of silicon nanowires in the footprint of the originating nanocomposites was demonstrated from such Co seeds. MX@SWCNTs (M = Ag, Co) can thus be used as environmentally stable nanoscale containers that allow the deliverance of catalytic nanoparticles in a prepatterned and aligned way.     

Novel fabrication of Janus particles from the surfaces of electrospun polymer fibers

A novel synthetic approach for the efficient fabrication of Janus silica particles was demonstrated by embedment of zero-dimensional colloids on one-dimensional polymer fiber surfaces, followed by the surface modification on the exposed silica hemispheres. Electrospinning of poly(methyl methacrylate) and poly(4-vinyl pyridine) blends produced polymer fibers with high specific surface area and desired surface hydrophilicities. Fiber compositions determined the colloid adsorption density and uniformity. The colloid embedding resulted from the polymer softening was manipulated by the isothermal heat treatment. Subsequent silianization completed the amino functionalities on hemispherical surfaces of embedded silica colloids. Janus particles with uniform asymmetric chemical features were further labeled with gold nanoparticles before their recovery from fiber substrates. Fabrication of Janus particles, including colloid adsorption, temperature-driven embedding, and hemispherical surface modification, were investigated and are discussed.     

Fabrication of carbon nanotube sheets and their bilirubin adsorption capacity

Bilirubin adsorption on carbon nanotube surfaces has been studied to develop a new adsorbent in the plasma apheresis. Powder-like carbon nanotubes were first examined under various adsorption conditions such as temperatures and initial concentrations of bilirubin solutions. The adsorption capacity was measured from the residual concentrations of bilirubin in the solution after the adsorption process using a visible absorption spectroscopy. We found that multi-walled carbon nanotubes (MWCNTs) exhibit greater adsorption capacity for bilirubin molecules than that of single-walled carbon nanotubes (SWCNTs). To guarantee the safety of the adsorbents, we fabricated carbon nanotube sheets in which leakage of CNTs to the plasma is suppressed. Since SWCNTs are more suitable for robust sheets, a complex sheet consisting of SWCNTs as the scaffolds and MWCNTs as the efficient adsorbents. CNT/polyaniline complex sheets were also fabricated. Bilirubin adsorption capacity of CNTs has been found to be much larger than that of the conventional materials because of their large surface areas and large adsorption capability for polycyclic compound molecules due to their surface structure similar to graphite.     

Flow-induced conformational changes in gelatin structure and colloidal stabilization

Flow can change the rate at which solutes adsorb on surfaces by changing mass transfer to the surface, but moreover, flow can induce changes in the conformation of macromolecules in solution by providing sufficient stresses to perturb the segmental distribution function. However, there are few studies where the effect of flow on macromolecules has been shown to alter the structure of macromolecules adsorbed on surfaces. We have studied how the local energy dissipation alters the adsorption of gelatin onto polystyrene nanoparticles ( r = 85 nm). The change in the nature of the adsorbed layer is manifest in the change in the ability of the nanoparticles to resist aggregation. Circular dichroism spectroscopy was used to assess conformational changes in gelatin, and dynamic light scattering was used to assess the colloid stability. Experiments were conducted in a vortex jet mixer where energy density and mixing times have been quantified; mixing of the gelatin and unstable nanoparticles occurs on the order of milliseconds. The adsorption of the gelatin provides steric stabilization to the nanoparticles. We found that the stability of the gelatin-adsorbed nanoparticles increased with increasing mixing velocities: when the mixing velocities were changed from 0.9 to 550 m/s, the radius of the nanoclusters (aggregates) formed 12 h after the mixing decreased from 2620 to 600 nm. Increasing temperature also gave rise to similar trends in the stability behavior with increasing temperature, leading to increasing colloid stability. Linear flow birefringence studies also suggested that the velocity fields in the mixer are sufficiently strong to produce conformational changes in the gelatin. These results suggest that the energy dissipation produced by mixing can activate conformational changes in gelatin to alter its adsorption on the surfaces of nanoparticles. Understanding how such conformational changes in gelatin can be driven by local fluid mechanics and how these changes are related to the adsorption behavior of gelatin is very important both industrially and scientifically.     

"Sliding kinetics" of single-walled carbon nanotubes on self-assembled monolayer patterns: beyond random adsorption

We present the experimental results and theoretical model describing new adsorption kinetics of single-walled carbon nanotubes (swCNTs) onto self-assembled monolayer (SAM) including their sliding motion. The adsorption behavior of swCNTs on large-size SAM patterns is similar to the Langmuir isotherm, while that on nanoscale patterns shows a significant deviation which can be explained by the sliding motion of adsorbed nanotubes. The "sliding chamber" experiment confirms that swCNTs can align along the SAM patterns by sliding motion right above the SAM surfaces. This result provides new scientific insights regarding the adsorption kinetics of one-dimensional nanostructures, and, from a practical point of view, it can be an important guideline to design SAM patterns to assemble carbon nanotubes and nanowires into desired device structures.     

Assembly of colloidal particles into microwires using an alternating electric field

We have investigated the dielectrophoretic assembly of colloidal gold, carbon black, and carbon nanotubes into electrical wires. The resulting microwires have diameters less than 1 microm, with lengths ranging from 5 microm to 3 mm. Current-voltage curves for these wires indicate an ohmic response, where the resistance is determined by the type of colloid and by the frequency of the alternating field used to grow the wires. The predicted frequency dependence of dielectrophoresis is confirmed by experiment. Measurements of the threshold voltage for initial wire growth are also presented. These experiments demonstrate that a variety of nanoparticles can be assembled into microwires for sensor applications.     

SERS-activating effect of chlorides on borate-stabilized silver nanoparticles: formation of new reduced adsorption sites and induced nanoparticle fusion

Changes in morphology, surface reactivity and surface-enhancement of Raman scattering induced by modification of borate-stabilized Ag nanoparticles by adsorbed chlorides have been explored using TEM, EDX analysis and SERS spectra of probing adsorbate 2,2'-bipyridine (bpy) excited at 514.5 nm and evaluated by factor analysis. At fractional coverages of the parent Ag nanoparticles by adsorbed chlorides <0.6, the Ag colloid/Cl(-)/bpy systems were found to be constituted by fractal aggregates of Ag nanoparticles fairly uniform in size (10 +/- 2 nm) and SERS spectra of Ag(+)-bpy surface species were detected. The latter result was interpreted in terms of the presence of oxidized Ag(+) and/or Ag(n)(+) adsorption sites, which have been encountered also in systems with the chemically untreated Ag nanoparticles. At chloride coverages >0.6, a fusion of fractal aggregates into the compact aggregates of touching and/or interpenetrating Ag nanoparticles has been observed and found to be accompanied by the formation of another surface species, Ag-bpy, as well as by the increase of the overall SERS enhancement of bpy by factor of 40. The same Ag-bpy surface species has been detected under the strongly reducing conditions of reduction of silver nitrate by sodium borohydride in the presence of bpy. The formation of Ag-bpy is thus interpreted in terms of the stabilization of reduced Ag(0) adsorption sites by adsorbed bpy. The formation of reduced adsorption sites on Ag nanoparticle surfaces at chloride coverages >0.6 is discussed in terms of local changes in the work function of Ag. Finally, the SERS spectral detection of Ag-bpy species is proposed as a tool for probing the presence of reduced Ag(0) adsorption sites in systems with chemically modified Ag nanoparticles.     

Self-organization of carbon nanotubes in evaporating droplets

Here, we report a simple and efficient way for organizing carbon nanotubes, in particular, single-wall carbon nanotubes (SWNTs) into ordered structures from their dilute solutions. It was found that drying a droplet of carbon nanotube solution at room temperature on a wettable surface such as glass or silica wafer led to redistribution, accumulation, and organization of carbon nanotubes along the perimeter of the droplet. Unlike the aggregation behaviors of colloid nanoparticles, anistropic carbon nanotubes tended to show two orientations in a ring deposit: one parallel to the outer perimeter of the ring and the other normal to it in the interior. Drying droplets of SWNT solutions at high temperatures exhibited a long-range ordered structure. In addition, droplet drying may cause size separation of carbon nanotubes and pattern formation through interactions between droplets. This result helps us not only to further understand fluid dynamics during the drying process but also to provide a promising and simple strategy for either assembling carbon nanotubes on a surface or organizing them into well-aligned films and fibers.     

Enthalpy and entropy effects in hydrogen adsorption on carbon nanotubes

Interaction energies and entropies associated with hydrogen adsorption on the inner and outer surfaces of zigzag single-wall carbon nanotubes (SWCNT) of various diameters are analyzed by means of molecular mechanics, density functional theory, and ab initio calculations. For a single molecule the strongest interaction, which is 3.5 greater than that with the planar graphite sheet, is found inside a (8,0) nanotube. Adsorption on the outer surfaces is weaker than that on graphite. Due to the steric considerations, both processes are accompanied by an extremely strong decline in entropy. Absence of specific adsorption sites and weak attractive interaction between hydrogen molecules within carbon nanotubes results in their close packing at low temperatures. Using the calculated geometric and thermodynamic parameters in Langmuir isotherms we predict the adsorption capacity of SWCNTs at room temperature to be smaller than 1 wt % even at 100 bar.