A new germanium-based linker for solid phase synthesis of aromatics: synthesis of a pyrazole library

An efficient synthesis of chlorogermane linker 12 is described. Economic introduction of germanium into this linker is accomplished by insertion of dichlorogermylene [from germanium(IV) chloride] into the homobenzylic C-Cl bond of 4-(2-chloroethyl)phenol 1. Using linker 12, transmetalation with lithiated 4-acetophenone, 3-acetophenone, and 4-(4'methoxy)biphenyl followed by Mitsunobu-type coupling to Argogel gives functionalized resins 14, 16, and 18, respectively. Treatment of resin 18 with TFA, ICl, Br2, or NCS effects clean ipso-degermylation releasing biphenyls 19-22, respectively. Resins 14 and 16 are employed for the parallel synthesis of a library of pyrazoles by enaminone formation (using Bredereck's reagent), condensative ring-closure (using a series of monosubstituted hydrazines), and cleavage (using TFA and Br2). Analysis of this library reveals the influence of the hydrazine substituent on both the regioselectivity of ring-closure and the propensity for electrophilic substitution at the 4-position of the pyrazoles during ipso-degermylative cleavage.     

Preparation of tripeptide-bridged dicatechol ligands and their macrocyclic molybdenum(VI) complexes: fixation of the RGD sequence and the WKY sequence of urotensin ii in a cyclic conformation

Dicatechol ligands were prepared with caprylic acid (6-H(4)) or the naturally occurring RGD (23-H(4)) or WKY sequences (32-H(4)) as spacers. 6-H(4) was prepared by solution-phase amide coupling chemistry, while 16, the precursor of 23-H(4), was obtained by solution-phase and solid-phase preparation. In the latter case, a polystyrene resin with a hydrazine benzoate linker was used as the solid support. The last coupling step was performed simultaneously with cleavage of the peptide from the resin. The protecting groups of 16 were all removed in one step to yield the free ligand 23-H(4). The WKY-bridged derivative 32-H(4) was obtained by a similar solid-phase synthesis followed by deprotection. The reaction of all three ligands with dioxomolybdenum(VI) bis(acetylacetonate) afforded 19-membered metallamacrocycles in which the short peptides are conformationally fixed in a turn-type structure. Hereby, the side-chain functionalities of the peptides do not interfere in the metal complexation.     

An improved procedure for the preparation of aminomethyl polystyrene resin and its use in solid phase (peptide) synthesis

2-Aminoethanol was used to successively replace hydrazine in the preparation of aminomethyl polystyrene resin thereby facilitating purification and by-product removal. The syntheses of the polypeptides ACP (65-74) and oxytocin demonstrated that the use of aminomethyl polystyrene resin prepared in this manner was equal to or better than that prepared using the hydrazine method.     

Fmoc-based synthesis of peptide alpha-thioesters using an aryl hydrazine support

C-Terminal peptide thioesters are key intermediates in the synthesis/semisynthesis of proteins and of cyclic peptides by native chemical ligation. They are prepared by solid-phase peptide synthesis (SPPS) or biosynthetically by protein splicing techniques. Until recently, the chemical synthesis of C-terminal alpha-thioester peptides by SPPS was largely restricted to the use of Boc/Benzyl chemistry due to the poor stability of the thioester bond to the basic conditions required for the deprotection of the N(alpha)-Fmoc group. In the present work, we describe a new method for the SPPS of C-terminal thioesters using Fmoc/t-Bu chemistry. This method is based on the use of an aryl hydrazine linker, which is totally stable to conditions required for Fmoc-SPPS. When the peptide synthesis has been completed, activation of the linker is achieved by mild oxidation. This step converts the acyl hydrazine group into a highly reactive acyl diazene intermediate which reacts with an alpha-amino acid alkyl thioester (H-AA-SR) to yield the corresponding peptide alpha-thioester in good yield. This method has been successfully used to prepare a variety of peptide thioesters, cyclic peptides, and a fully functional Src homology 3 (SH3) protein domain.     

A new method for cleavage of silicon-carbon linkers on glass plate supports with applications to solid-phase syntheses on silica resins

We describe herein a novel and facile method for the cleavage of a silicon-based linker on solid-phase supports such as glass plates or silica resin. The linker was efficiently cleaved by oxidation of the silicon-carbon bond (Tamao-Kumada oxidation) to release the functionalized molecule.     

A partially crosslinked bicontinuous cubic phase exhibiting a temperature range of more than 100 °C

A new methodology of partial crosslinking is presented for stabilizing the bicontinuous cubic phase without losing its dynamic nature. It was applied to a mixture of 1,2-bis[4'-(9'-decenyloxy)benzoyl]hydrazine with a bi-functional linker, remarkably stabilizing the phase in comparison with the neat compound having no C=C bond at the end of the alkyl tail.     

Preparation of fluorinated linkers: use of 19F NMR spectroscopy to establish conditions for solid-phase synthesis of pilicide libraries

Three fluorinated linkers which are analogues of linkers commonly used in solid-phase peptide synthesis have been prepared. One of the linkers was used in combination with gel-phase 19F NMR spectroscopy to develop conditions for solid-phase synthesis of two libraries of pilicides, i.e. compounds designed to inhibit assembly of adhesive pili in uropathogenic Escherichia coli. Attachment to and cleavage from the linker could be monitored based on the chemical shift of the fluorine atom of the linker. In addition, use of the linker as internal standard allowed quantification and optimization of reactions occurring further away from the linker when fluorinated building blocks were employed. Importantly, high-quality 19F NMR spectra were obtained for compounds linked to a TentaGel resin in a standard NMR tube using an ordinary NMR instrument.     

Three-fold interpenetrating three-dimensional networks based on C-methylcalix[4]resorcinarene incorporating benzophenone guest molecules

A new solid based on C-methylcalix[4]resorcinarene and the linker molecule bis(4-pyridylmethylidyne)hydrazine (bpmh) has been prepared, in which brick-wall sheets are linked in the third dimension to give networks with three intersecting perpendicular channels; the networks interpenetrate three-fold, but nevertheless leave cavities capable of including sizable guest molecules.     

Synthesis and characterization of bis-[1]rotaxanes via salen-bridged bis-pillar[5]arenes

The series of salen-bridged bis-pillar[1]arenes were conveniently prepared by condensation reaction of5,5'-methylenebis(2-hydroxybenzalde hyde)or 5,5'-(propane-2,2-diyl)bis(2-hydroxybenzaldehyde)with mono-amido-functionalized pillar[5]arenes containing different terminal aminoalkyl groups in refluxing ethanol.The^1H NMR and 2D-NOESY spectra indicated that the salen-bridged bis-pillar[5]arenes with longer allcylene linker(n=3,4,6)formed the fascinating bis-[1]rotaxanes,while the salenbridged bis-pillar[5]arenes with short hydrazine and ethylenediamino linker(n=0,2)predominately existed in free form.The single crystal structure of the bis-pillar[5]are ne ambiguously indicated that two propylenediamino linker inserted in to two cavities of pillar[5]arene to form a novel bis-[1]rotaxanes.     

pH响应性树枝状聚合物-金纳米粒子复合药物载体的制备

以表面接枝聚乙二醇链的聚酰胺胺树枝状聚合物(PEG-PAMAM)为纳米载体, 在其内部空腔包覆金纳米粒子, 在金纳米粒子表面连接硫辛酸改性的阿霉素(LA-DOX), 从而间接实现了抗癌药物在PEG-PAMAM内的高效负载. 同时, LA-DOX中的酰腙键提供pH响应性, 实现了药物的pH响应性释放. 紫外-可见(UV-Vis)光谱表明, 包覆金纳米粒子的PEG-PAMAM纳米载体对LA-DOX的负载能力显著增强. 体外细胞实验表明, 负载LA-DOX的树枝状聚合物-金纳米粒子复合药物载体具有较强的抗肿瘤能力.     

Tailoring ultraresins based on the cross-linking of polyethylene imines. Comparative investigation of the chemical composition, the swelling, the mobility, the chemical accessibility, and the performance in solid-phase synthesis of very high loaded resins

Ultraresins have been prepared from polyethyleneimines and cross-linking molecules and have been provided with various degrees of cross-linking. The total nitrogen loading and the loading with secondary and with tertiary amines have been determined in all products. Nitrogen loadings of the novel resins were up to 15 mmol/g, reactive secondary amines up to 13.8 mmol/g. In addition to the exceptionally high loading, the novel resins displayed efficient swelling volumes in polar and nonpolar solvents. The mobility of resin-bound species as determined by EPR-spectroscopy, depending on the amount of cross-linker, indicated good flexibility and reactivity of this resin type. The novel, high-loaded resins have been investigated subsequently in solid-phase synthesis. The Rink amide linker and two different hydroxy linkers (hydroxyacetamide, HMPB) have been attached to the resin. Despite the high loadings, the secondary amines were easily accessible and could be functionalized exhaustively. Reactivity of the linker-coupled resins was found to be closely related to the resin composition. Increased resin cross-linking led to reduced swelling, reduced mobility, and reduced reactivity in the synthesis of a medium-sized model peptide. As the result of the systematic investigation of structure-property relations in Ultraresins, a support material was identified that combined high reactivity and a mobility in the range of the extremely flexible Tentagel supports. In the optimized Ultraresin, >95% of all available secondary nitrogens could be coupled with Rink linker or with the small 2-hydroxyacetamide anchor, resulting in loadings from 2.7 to 6.8 mmol/g, respectively. A resin with an attached HMPB linker and spacer delivered analytically pure peptides in solid-phase synthesis, fully exploiting the exceptionally high loadings.     

Facile solid-phase synthesis of head-side chain cyclothiodepsipeptides through a cyclative cleavage from MeDbz-resin

Head to side-chain cyclothiodepsipeptides were conveniently prepared through a cyclative cleavage using the MeDbz linker. Briefly, the peptide sequence was elongated on a MeDbz-Gly-ChemMatrix resin and reacted with 4-nitrophenyl chloroformate, followed by treatment with DIEA to render an activated cyclic N-acyl-N′-methylurea-resin. Removal of the Cys protecting group and further treatment with DIEA allowed the formation of the thiolactone with the concomitant release of the cyclic peptide from the resin.     

Facile synthesis of C-terminal peptide hydrazide and thioester of NY-ESO-1 (A39-A68) from an Fmoc-hydrazine 2-chlorotrityl chloride resin

The NY-ESO-1 (A39-A68) peptide hydrazide was prepared through 9-fluorenyl-methoxycarbonyl solid-phase peptide synthesis (Fmoc SPPS) from a new 9-fluorenyl-methoxycarbonyl hydrazine 2-chlorotrityl chloride (Fmoc-hydrazine 2CTC) resin. The new resin was ideal for long-term storage and usage in Fmoc SPPS. Besides, the title peptide hydrazide could be transformed nearly quantitatively into the corresponding peptide thioester, which was both isolable and usable directly in native chemical ligation (NCL).     

Synthesis of polydentate chalcogen-containing ligands using the system hydrazine hydrate–base

The reaction of dichlorodiethyl ether or dichlorodiethylamine hydrochloride with potassium or ethanolammonium dichalcogenides prepared in situ from elemental sulfur or selenium in the system hydrazine hydrate–alkali results in oligomeric dichalcogenides, whose further splitting at the chalcogen–chalcogen bond in the same system and subsequent alkylation affords bis(organylsulfanyl)- or bis(organylselanyl)-substituted derivatives of diethyl ether or diethylamine. Ligands with aryl substituents at the chalcogens have been prepared in 48-59% yield by splitting of diaryldichalcogenides in the system hydrazine hydrate–alkali and subsequent reaction with dichlorodiethyl ether or dichlorodiethylamine. A ditopic tetradentate ligand has been synthesized by the use of dichlorodiethylformal.     

Preparation of peptide p-nitroanilides using an aryl hydrazine resin

[reaction: see text] Peptide p-nitroanilides are useful compounds for studying protease activity; however, the poor nucleophilicity of p-nitroaniline makes their preparation difficult. We describe a new efficient approach for the Fmoc-based synthesis of peptide p-nitroanilides using an aryl hydrazine resin. Mild oxidation of the peptide hydrazide resin yields a highly reactive acyl diazene that efficiently reacts with weak nucleophiles. We have prepared several peptide p-nitroanilides, including substrates for the Lethal Factor protease from B. anthracis.     

大孔聚丙烯醛-呋喃-2-硫代酰腙螯合树脂的合成及其性能的初步研究

合成了一新型高分子骨架，大孔内烯醛－苯乙烯－二乙烯苯三元共聚物树脂骨架，通过其含有的活泼醛基与呋喃－2－硫代酰肼螯合剂进行高分子反应，制备了一种含氮、硫配位原子的螯合树脂，聚丙烯醛－呋喃－2－硫代酰腙。对其与贵金属离子的吸附性能进行了初步研究，结果表明，该树脂对金、钯及铂具有选择性吸附作用，吸附容量分别为1.20mmol/g干树脂，0.37mmol/g干树脂及0.28mmol/g干树脂。     

The sulfone linker in solid-phase synthesis: preparation of 3,5-disubstituted cyclopent-2-enones

The preparation of functionalized 3,5-disubstituted cyclopent-2-enones via a solid-phase sulfone linker strategy is described. Polystyrene/divinylbenzene sulfinate 1 underwent S-alkylation followed by alpha,alpha-dialkylation with cis-1,4-dichloro-2-butene to form polymer-bound 3-phenylsulfonylcyclopentenes 8. Subsequent epoxidation of the cyclopentene moiety in 8 was accomplished by treatment of mCPBA, and the resulting oxirane ring in resin 9 was opened with various nucleophiles, i.e., Grignard and cuprate reagents, azide ion, and amines. To complete the sulfone-based linker strategy, Swern or TPAP oxidation of 10 gave a transient gamma-ketosulfone, which underwent sulfinate elimination, thus cleaving the sulfone linker. Eleven 3,5-disubstituted cyclopent-2-enones (11) were prepared with this five-step process in 18-40% overall yield from solid-phase benzene sulfinate 1.     

Vinyl sulfones in solid-phase synthesis: preparation of 4,5,6,7-tetrahydroisoindole derivatives

The preparation of functionalized 4,5,6,7-tetrahydroisoindole via a traceless solid-phase sulfone linker strategy is described. Thermolytic extrusion of SO(2) from polymer-bound 3-(phenylsulfonyl)-3-sulfolene (7) generated polymer-bound 2-(phenylsulfonyl)-1,3-butadiene (9) in situ which underwent Diels--Alder cycloaddition with various dienophiles to furnish vinyl sulfone resins 10-14. To complete a traceless linker cleavage strategy, (p-tolysulfonyl)methyl isocyanide or ethyl isocyanoacetate was employed to react with the vinyl sulfone moiety to liberate functionalized 4,5,6,7-tetrahydroisoindole products from the resin. Using this chemistry, nine tetrahydroisoindole derivatives (6, 15-22) were prepared in 32-41% overall yields from polystyrene/divinylbenzene sulfinate 1.     

丁基锂与氯化铜存在条件下仲胺偶联形成N-N键的新方法

报道了以仲胺反应底物经丁基锂夺去活性质子,无水氯化铜氧化偶联形成N—N键的新方法.共完成了11种底物尝试,所得产物肼的产率在17％～76％之间.相关合成方法是一种从仲胺制备对称取代肼的高效合成方法.     

Efficient anchorage of Pd nanoparticles on carbon nanotubes as a catalyst for hydrazine oxidation

A simple method is devised to deposit well-dispersed Pd nanoparticles on multi-walled carbon nanotubes (CNTs). Pd nanoparticles (1–3 nm) prepared in ethanol were transferred to toluene solution and modified by organic molecule benzyl mercaptan which acts as a cross linker between Pd nanoparticles and CNTs. The morphology and structure of the resulting Pd/CNT nanocomposite were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The results show that Pd nanoparticles were highly dispersed and effectively anchored on CNTs. The excellent electrocatalytic activity of the Pd/CNT nanocomposite for the oxidation of hydrazine was demonstrated by cyclic voltammetry.