Preparation, Curing Reactivity and Thermal Properties of Titanium-doped Silicone Resins

Novel titanium-doped silicone resins were synthesized from low-cost silane monomers and tetrabutyl titanate as raw materials and hydrochloric acid as catalyst, with titanium element as dopant into principal chain of Si-O-Si. The resins were characterized by means of FTIR, 1 H NMR and 13 C NMR spectra, their thermal properties and curing properties were investigated and their corresponding films were determined. The results show that the thermal stability and storage stability of the resins were influenced by the types of silane monomers containing different carbon atomicities of organic group. The thermal stability of the titanium-doped silicone resin with a molar ratio of silane monomer B(n-propyl triethoxysilane) to silane monomer C(n-octyl triethoxysilane) being 1:1 is superior to that of the resin with a molar ratio of silane monomer B to silane monomer C being 1:3. However, the storage stability of the former is inferior to that of the latter.This work also showed that the synthesized titanium-doped silicone resins have the highest thermal stability up to 450―500 °C with an atomicity molar ratio of 1:4 of titanium to silicon in the reactants. But the best storage stability of the resin prepared from the reactants with an atomicity molar ratio of 1:6[n(Ti):n(Si)] was obtained. The effect of the type and content of curing agent on the curing properties of the resin was also studied. Moreover, thermal mechanism and curing mechanism were proposed in this work.     

Interactions between Nafion resin and protonated dodecylamine modified montmorillonite: a solid state NMR study

A series of nanocomposites have been prepared from perfluorosulfonylfluoride copolymer resin (Nafion) and layered montmorillonite (MMT) modified with protonated dodecylamine by conventional sol-gel intercalation. The structure of these nanocomposite materials have been characterized using FT-IR, elemental analysis, XRD and solid state NMR techniques, including 19F magic-angle spinning (MAS) NMR, 19F NMR relaxation time measurements, 29Si MAS, 1H MAS, 1H-13C cross-polarization magic-angle spinning (CPMAS), and 1H-13C heteronuclear correlation (HETCOR) 2D NMR. The results showed that thermal stability of Nafion was improved moderately by the addition of dodecylamine modified MMT without intercalation. FT-IR and 29Si MAS NMR results indicated that dodecylamine modification did not result in obvious changes in the MMT lattice structure. The XRD results showed that the protonated dodecylamine has been embedded and intercalated into the MMT interlayers, whereas Nafion was not. Elemental analysis results also suggested that some dodecylamine was adsorbed on the surface of MMT. 1H-13C HETCOR 2D NMR experiment clearly indicated that strong electrostatic interactions were present between the NH+3 group of dodecylamine and the fluorine-containing groups (CF3, OCF2, and SCF2) of Nafion resin. Such electrostatic interactions are probably the major contributors for the improved thermal stability of the resultant composite materials.     

EPR and solid-state NMR studies of poly(dicarbon monofluoride) (C2F)n

Poly(dicarbon monofluoride) (C2F)n was studied by electron paramagnetic resonance (EPR) and solid-state nuclear magnetic resonance (NMR). The effects of physisorbed oxygen on the EPR and NMR relaxation were underlined and extrapolated to poly(carbon monofluoride) (CF)n and semi-covalent graphite fluoride prepared at room temperature. Physisorbed oxygen molecules are shown to be an important mechanism of both electronic and nuclear relaxations, resulting in apparent spin-lattice relaxation time and line width during NMR and EPR measurements, respectively. The effect of paramagnetic centers on the 19F spin-lattice relaxation was underlined in accordance with the high electron spin density determined by EPR. 19F magic angle spinning (MAS) NMR, 13C MAS NMR, and 13C MAS NMR with 19F to 13C cross polarization (CP) underline the presence of two types of carbon atoms, both sp3 hybridized: some covalently bonded to fluorine and the others linked exclusively to carbon atoms. Finally, a C-F bond length of 0.138 +/- 0.002 nm has been determined thanks to the re-introduction of dipolar coupling using cross polarization.     

Line shapes in CP/MAS (13)C NMR spectra of cellulose I

The CP/MAS (13)C NMR line shape of cellulose I has been qualitatively analyzed by direct simulations using the Ornstein-Uhlenbeck stochastic process and the Kubo model. Both approaches describe a anhydroglucose C4 carbon as a oscillator with fluctuating Larmor frequency. The NMR resonance frequency is written omega=omega +omega(t), where the fluctuating part with zero mean was modelled as a stationary Markov diffusion process. The simulation results both motivates the use of multiple line shapes when fitting CP/MAS (13)C NMR spectra recorded on cellulose I and gives some insights into why signals from crystalline cellulose I give rise to Lorentzian line shapes.     

TG-DTA study of melamine-urea-formaldehyde resins

The thermal behaviour of MUF resins from different suppliers with different content of melamine was studied, along with the ¹³C NMR spectroscopic analysis of resin structure and the testing of particleboards in current production at Estonian PB factory Pärnu Plaaditehas AS. The chemical structure of resins from DMSO-d₆ solutions was analysed by ¹³C NMR spectroscopy on a Bruker AMX500 NMR spectrometer. The melamine level in different MUF resins is compared by the ratios of carbonyl carbon of urea and triazine carbon of melamine in ¹³C NMR spectra. Curing behaviour of MUF resins was studied by stimultaneous TG-DTA techniques on the Labsys? instrument Setaram. The shape of DTA curves characterisises the resin synthesis procedure by the extent of polymerisation of UF and MF components and is in accordance with structural data.     

Quantitative determination of loadings and oxidation products of polystyrene-bound phosphines using 31p MAS NMR

The use of (31)P magic angle spinning (MAS) NMR for the quantitative determination of resin loadings and the building up of oxidation products was investigated. Loadings of polystyrene-bound phosphines were evaluated via addition of triphenyl phosphate as reference compound. Results for a series of phosphines are consistent with those obtained from well-established analytical methods. The compounds were also investigated with (13)C MAS NMR, and the individual oxidation stabilities were monitored under oxygen atmosphere.     

Solid-state 13C NMR studies on organic-inorganic hybrid zeolites

A novel type of organic-inorganic hybrid zeolite with organic lattice (ZOL) is studied in detail by solid-state (13)C magic angle spinning nuclear magnetic resonance (MAS NMR). The (13)C MAS NMR measurements employing several pulse sequences quantitatively demonstrate that methylene groups are really incorporated in the framework, although they are partially cleaved into methyl groups. The organic species in ZOL materials are open for adsorbates, which is evidenced by the (13)C MAS NMR measurements for an n-hexane-adsorbing ZOL material. This finding strongly suggests that organic moieties are incorporated as a zeolite framework, indicating that ZOL is not a physical mixture of a carbon-containing amorphous aggregate and a conventional zeolite but a true organic-inorganic hybrid zeolite.     

Synthesis of Davankov‐type hypercrosslinked resins using different isomer compositions of vinylbenzyl chloride monomer,and application in the solid‐phase extraction of polar compounds

Two different gel‐type resins have been prepared by suspension polymerization using 2 wt % divinylbenzene (DVB) with either p‐vinylbenzyl chloride (pVBC) or a mixture of VBC isomers (～ 70% m‐; ～ 30% p‐). Significant difference in the chlorine content was observed, which was attributed to a more favored hydrolysis process when p‐VBC was used. The presence of hydroxyl groups has been confirmed by elemental microanalytical data and solid‐state ¹³C cross‐polarization/magic angle spinning (CP‐MAS) nuclear magnetic resonance (NMR) spectra. Hypercrosslinked resins were prepared from both gel‐type precursors by treatment with FeCl₃ in 1,2‐dichloroethane (DCE) at 80 °C. The resultant resins showed differences in specific surface area and degree of hydrophilicity. The performance of the hypercrosslinked resins was evaluated in solid‐phase extraction (SPE) of polar compounds, and better results were obtained for the hypercrosslinked resin prepared from p‐VBC that combines a relatively high specific surface area (908 m² g^?1) and somewhat higher oxygen content (3.96 wt % O). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1718–1728, 2005     

Insight into the structure of silver cyanide from (13)C and (15)N solid-state NMR spectroscopy

The structure of silver cyanide has been investigated by solid-state multinuclear magnetic resonance spectroscopy. Carbon-13 and nitrogen-15 NMR spectra of magic-angle-spinning (MAS) and stationary powder samples of isotopically enriched Ag(13)CN, Ag(13)C(15)N, and AgC(15)N have been acquired at the external applied magnetic field strengths 4.7, 7.05, and 9.4 T. Axially symmetric carbon and nitrogen chemical shift (CS) tensors provide evidence for linearity of the polymeric (-Ag-CN-)(n)() chains. A two-site model is required to successfully simulate the (13)C MAS NMR line shape, which is dominated by indirect nuclear spin-spin coupling between (109/107)Ag and (13)C nuclei. In combination with relativistic zeroth-order regular approximation density functional theory (ZORA-DFT) calculations on model AgCN fragments, the (13)C MAS NMR results show that 30 +/- 10% of the silver sites are disordered, that is, either -NC-Ag-CN- or -CN-Ag-NC-, and 70 +/- 10% of the silver sites are ordered, that is, -NC-Ag-NC-. Effective dipolar coupling data extracted from (13)C NMR spectra of stationary samples allow an upper limit of 1.194 A to be placed on the carbon-nitrogen internuclear distance. After incorporation of the effects of anisotropic indirect nuclear spin-spin coupling and motional averaging on the NMR-derived distance, a corrected value of r(CN) = 1.16 +/- 0.03 A is obtained. This work provides an example of the type of information which may be obtained from solid-state NMR studies of disordered materials and how such information may complement that available from diffraction studies.     

Quality control of solid-phase synthesis: C PST/MAS NMR analysis on non-destructed SynPhase lantern

Pulse saturation transfer (PST)/MAS was highly effective for enhancing a magic angle spinning (MAS) ¹³C NMR of the inter-mobile region of polymer supported organic compounds. Direct monitoring of solid-phase synthesis on non-destructed SynPhase lantern was demonstrated using a 7 mm probe on the ¹³C PST/MAS NMR study.     

Analyses of synthetic resins by application of 13C NMR

In a study of synthetic resin analysis, ¹³C NMR spectra of phenol resins were measured, and the chemical shifts of the various carbon sites compared with the resins' reactivity with formaldehyde. Measurements were made with phenol, para-substituted phenols, chlorophenols, hydroxytoluenes, dimethyl(hydroxy)benzenes, dihydroxybenzenes, and dihydroxytoluenes. The chemical shifts of these phenols were compared with calculated shifts obtained by using a simple summing rule. These chemical shifts are closely related in magnitude to the reactivity of the phenols with formaldehyde. For example, resorcin has the greatest reactivity with formaldehyde of the above-mentioned phenols and this experimental result agrees well with the measured large ¹³C chemical shifts for resorcin.     

Mechanism studies of the conversion of 13C-labeled n-butane on zeolite H-ZSM-5 by using 13C magic angle spinning NMR spectroscopy and GC-MS analysis

By using 13C MAS NMR spectroscopy (MAS = magic angle spinning), the conversion of selectively 13C-labeled n-butane on zeolite H-ZSM-5 at 430-470 K has been demonstrated to proceed through two pathways: 1) scrambling of the selective 13C-label in the n-butane molecule, and 2) oligomerization-cracking and conjunct polymerization. The latter processes (2) produce isobutane and propane simultaneously with alkyl-substituted cyclopentenyl cations and condensed aromatic compounds. In situ 13C MAS NMR and complementary ex situ GC-MS data provided evidence for a monomolecular mechanism of the 13C-label scrambling, whereas both isobutane and propane are formed through intermolecular pathways. According to 13C MAS NMR kinetic measurements, both pathways proceed with nearly the same activation energies (E(a) = 75 kJ mol(-1) for the scrambling and 71 kJ mol(-1) for isobutane and propane formation). This can be rationalized by considering the intermolecular hydride transfer between a primarily initiated carbenium ion and n-butane as being the rate-determining stage of the n-butane conversion on zeolite H-ZSM-5.     

Identification and quantitative determination of lignans in Cedrus atlantica resins using 13C NMR spectroscopy

Identification and quantitative determination of individual components of resin collected on the trunk of 28 Cedrus atlantica trees, grown in Corsica, has been carried out using 13C NMR spectroscopy. Eight resin acids bearing either the pimarane or abietane skeleton, two monoterpene hydrocarbons and four oxygenated neutral diterpenes have been identified, as well as three lignans, scarcely found in resins. Three groups could be distinguished within the 28 resin samples. The nine samples of Group I had their composition dominated by diterpene acids (33.7-45.8%), with abietic acid (6.2-18.7%) and isopimaric acid (5.1-12.6%) being the major components. The four samples of Group II contained resin acids (main components) and lignans in moderate amounts (up to 10.3%). Conversely, lignans (38.8-63.8%) were by far the major components of the 15 samples of Group III. Depending on the sample, the major component was pinoresinol (18.1-38.9%), lariciresinol (17.2-33.7%) or lariciresinol 9'-acetate (16.9-29.1%). Finally, due to the high biological interest in lignans, a rapid procedure, based on 1H NMR spectroscopy, was developed for quantification of lignans in resins of C. atlantica.     

CP/MAS (13)C NMR study of cellulose and cellulose derivatives. 1. Complete assignment of the CP/MAS (13)C NMR spectrum of the native cellulose

The precise assignments of cross polarization/magic angle spinning (CP/MAS) (13)C NMR spectra of cellulose I(alpha) and I(beta) were performed by using (13)C labeled cellulose biosynthesized by Acetobacter xylinum (A. xylinum) ATCC10245 strain from culture medium containing D-[1,3-(13)C]glycerol or D-[2-(13)C]glucose as a carbon source. On the CP/MAS (13)C NMR spectrum of cellulose from D-[1,3-(13)C]glycerol, the introduced (13)C labeling were observed at C1, C3, C4, and C6 of the biosynthesized cellulose. In the case of cellulose biosynthesized from D-[2-(13)C]glucose, the transitions of (13)C labeling to C1, C3, and C5 from C2 were observed. With the quantitative analysis of the (13)C transition ratio and comparing the CP/MAS (13)C NMR spectrum of the Cladophora cellulose with those of the (13)C labeled celluloses, the assignments of the cluster of resonances which belong to C2, C3, and C5 of cellulose, which have not been assigned before, were performed. As a result, all carbons of cellulose I(alpha) and I(beta) except for C1 and C6 of cellulose I(alpha) and C2 of cellulose I(beta) were shown in equal intensity of doublet in the CP/MAS spectrum of the native cellulose, which suggests that two inequivalent glucopyranose residues were contained in the unit cells of both cellulose I(alpha) and I(beta) allomorphs.     

Ionothermal synthesis, crystal structure and solid-state NMR spectroscopy of a new organically templated gallium oxalatophosphate: (H2TMPD)0.5[Ga3(C2O4)0.5(PO4)3] (TMPD=N,N,N',N'-tetramethyl-1,3-propanediamine)

A new organically templated gallium oxalatophosphate, (C7H20N2)0.5[Ga3(C2O4)0.5(PO4)3], has been synthesized by using a low-melting-point eutectic mixture of choline chloride and oxalic acid as a solvent and characterized by single-crystal X-ray diffraction, thermogravimetric analysis and solid-state NMR spectroscopy. It is the first example of ionothermal synthesis of organically templated metal oxalatophosphate. The structure contains double 6-ring units of the composition Ga6(PO4)6 which are connected by oxalate ligands and P-O-Ga bonds to form a 3-D framework. The charge-compensating organic ammonium cations which are disordered over two positions are located at the intersections of two types of 8-ring channels. 1H MAS and 13C CPMAS NMR studies confirm the presence of N,N,N',N'-tetramethyl-1,3-propanediammonium cation. The 71Ga and 31P MAS NMR spectra are also consistent with the crystal structure analysis results.     

Using one- and two-dimensional NMR techniques to characterize reaction products bound to Chiron SynPhase crowns

Solid-phase MAS techniques have proved to be very useful in characterizing compounds bound to resin; however, little has been reported on using NMR to characterize compounds attached to Chiron SynPhase crowns. We have used proton, carbon, and COSY spectra obtained with a Varian Nano.nmr probe to characterize products from a published reaction sequence attached to MD (methacrylic acid/dimethylacrylamide copolymer) crowns. We have also performed solvent surveys to determine the best solvents for acquiring spectra of materials bound to both MD and PS (polystyrene) crowns.     

酚醛基质苯并咪唑螯合树脂的合成及配位性能

通过1,4-对苯二酚二缩水甘油醚和2,2′-二苯并咪唑二乙胺反应合成四苯并咪唑单体(TBMZ),经甲醛等缩合生成酚醛聚合物为基质的苯并咪唑螯合树脂(PTBMZs)。 新型螯合树脂配基含量达2.1~3.02 mmol/g。新树脂及其单体结构经13C核磁共振谱、FT-IR红外光谱、元素分析和DSC分析确证。 测定了Cu2+、Ni2+、Zn2+、Cd2+和Co2+氯化物在pH值为1.0~6.0的缓冲溶液中的配位容量。 实验结果表明,该类螯合树脂对Cu2+有高度的选择性,KCuX≥4.3非竞争条件下,PTBMZ-1的最大配位容量为1.15 mmol/g(pH=5.0,Cu2+),PTBMZ-2的最大配位容量为0.97 mmol/g(pH=5.0,Cu2+),配基占有率分别为35.9%,33.4%。 PTBMZ-1树脂对Cu2+吸附较快,t1/2=21 min。 电子顺磁共振谱和FT-IR光谱分析结果表明,形成n(金属离子)∶n(配基)=1∶2的螯合物为主。     

Addition curing thermosets endcapped with 4-amino [2.2] paracyclophane

A new family of addition curing polyimides were prepared that contained 4-amino [2.2]-paracyclophane as the endcap. An improved synthesis of the endcap 4-amino-[2.2] cyclophane was accomplished increasing the yield to 60% and simplifying the procedure. DSC and rheological analysis of endcapped polyimide oligomers confirmed that the onset for polymerization of the ethylene bridge was 250°C. ¹³C CP/MAS NMR was used to determine the structural changes of the oligomers after thermal treatment. The cyclophane capped polyimides were successfully compression molded to from void free neat resin specimens. T'_gs as high as 353°C were obtained by thermomechanical analysis for postcured samples. Preliminary thermal stability studies (TGA) suggest that these resins have a high onset of decomposition ranging from 549 to 567°C.     

Multinuclear solid-state high-resolution and 13C -{27Al} double-resonance magic-angle spinning NMR studies on aluminum alkoxides

A combination of 27Al magic-angle spinning (MAS)/multiple quantum (MQ)-MAS, 13C-1H CPMAS, and 13C-{27Al} transfer of population in double-resonance (TRAPDOR) nuclear magnetic resonance (NMR) were used for the structural elucidation of the aluminum alkoxides aluminum ethoxide, aluminum isopropoxide, and aluminum tertiarybutoxide. Aluminum alkoxides exist as oligomers with aluminum in different coordinations. High-resolution 27Al MAS NMR experiments with high-spinning speed distinguished the aluminum atoms in different environments. The 27Al MAS NMR spectrum gave well-resolved powder patterns with different coordinations. Z-filter MQ-MAS was performed to obtain the number and types of aluminum environments in the oligomeric structure. 13C-1H CPMAS chemical shifts resolved the different carbon species (-CH3, =CH2, =CH-, and =C=) in the structures. 13C-{27Al} TRAPDOR experiments were employed to obtain relative Al-C dipolar interactions and to distinguish between terminal and bridging alkoxides in the crystallographic structures. The complete characterization of selected aluminum alkoxides using advanced NMR methods has evidenced the tetrameric structure for aluminum isopropoxide and the dimeric structure for aluminum tertiary-butoxide, as reported in the literature, and proposed a polymeric structure for aluminum ethoxide.     

Modification and intercalation of layered zirconium phosphates: a solid‐state NMR monitoring

Several layered zirconium phosphates treated with Zr(IV) ions, modified by monomethoxy‐polyethyleneglycol‐monophosphate and intercalated with doxorubicin hydrochloride have been studied by solid‐state MAS NMR techniques. The organic components of the phosphates have been characterized by the ¹³C{¹H} CP MAS NMR spectra compared with those of initial compounds. The multinuclear NMR monitoring has provided to establish structure and covalent attachment of organic/inorganic moieties to the surface and interlayer spaces of the phosphates. The MAS NMR experiments including kinetics of proton‐phosphorus cross polarization have resulted in an unusual structure of zirconium phosphate 6 combining decoration of the phosphate surface by polymer units and their partial intercalation into the interlayer space. Copyright © 2016 John Wiley & Sons, Ltd.