Generation of fullerenyl radicals and chemiluminescence in the (C<Subscript>60</Subscript>—R<Subscript>3</Subscript>Al)—O<Subscript>2</Subscript> system

Fullerenyl radicals (FR) RC₆₀ ^· and chemiluminescence (CL) are generated in the presence of O₂ in C₆₀—R₃Al (R = Et, Buⁱ) solutions in toluene (T = 298 K). The FR are formed due to the addition of the R^· radical, which is an intermediate of R₃Al autooxidation, to C₆₀. Mass spectroscopy and HPLC were used to identify Et_nC₆₀H_m (n, m = 1–6), Et_pC₆₀ (p = 2–6), and dimer EtC₆₀C₆₀Et as stable products of FR transformations. As found by ESR, the EtC₆₀ ^· radical (g = 2.0037) is also generated by photolysis of solutions obtained after interaction in the (C₆₀— R₃Al)—O₂ system. In the presence of dioxygen, the FR is not oxidized but yields complexes with O₂, which appear as broadening of the ESR signals. Chemiluminescence arising in the (C₆₀—R₃Al)—O₂ system is much brighter (I _max = 1.86·10⁸ photon s⁻¹ mL⁻¹) than the known background CL (I _max = 6.0·10⁶ photon s⁻¹ mL⁻¹) for the autooxidation of R₃Al and is localized in a longer-wavelength spectral region (λ_max = 617 and 664 nm). This CL is generated as a result of energy transfer from the primary emitter ³CH₃CHO* to the products of FR transformation: R_nC₆₀H_m, R_pC₆₀, and EtC₆₀C₆₀Et. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 205–213, February, 2007.     

Phase formation in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> system

Solid-phase interactions in the V₂O₅-Ta₂O₅-MoO₃ system were studied. The formation of com- pounds TaVO₅ and VTa₉O₂₅ in the V₂O₅-Ta₂O₅ binary system was verified. Tetragonal VTa₉O₂₅-base solid solutions of the general formula Ta_{5 + 4x} V_{5 − 4x} O₂₅ (x = 0.25–1) and TaVO₅-base solid solutions of the general formula Ta _x Mo_{1 − x} V_{2 − x} O_{8 − 3x} (x = 0.625–1) were found to form. Subsolidus phase equilibria in the V₂O₅-Ta₂O₅-MoO₃ were determined.     

Solution ozonolysis of C<Subscript>70</Subscript>: stable products and chemiluminescence

For the first time the total and relative contents of the stable ozonolysis products of fullerene C₇₀ solutions were identified by IR spectroscopy and elemental and chemical analyses. At the 100% conversion of C₇₀ a mixture of products corresponding to the empirical formula C₇₀O_14.3H_0.21 (epoxides: polyketones: polyesters: secondary fullerene ozonides (SFOZ): acids = 1.07: 6: 6: 0.21: 1.02) is formed. The content of polyketones, polyesters, acids, and SFOZ increases during the whole ozonolysis time (1 h). The number of oxygen atoms in epoxides C₇₀O _n (n = 1–4) is lower than that in epoxides C₆₀O _n (n = 1–6) formed by the ozonolysis of fullerene C₆₀. The kinetic curve of accumulation of epoxides C₇₀O _n (n = 1–4) passes through a maximum, which is observed 0.5 min after the beginning of ozonolysis. No epoxides were identified among the products 3.5 min after the ozonolysis. The photoluminescence (PL) (λ_max = 645 and 685 nm) of fullerene polyketones in glassy EtO₂/EtOH solutions frozen at 77 K was observed. This PL is much brighter, than that of polyketones formed upon the ozonolysis of fullerenes C₆₀. For the first time the chemiluminescence (CL) was detected and studied upon the ozonolysis of C₇₀ solutions at 300 K. The CL emitters are excited states of fullerene polyketones. The CL spectrum is partially overlapped with the known CL spectrum appeared upon the ozonolysis of C₆₀ (λ_max = 685 nm) but contains the greater number of maxima (λ_max = 645 and 685 nm), which is related to a lower symmetry of the C₇₀ oxidation products.     

Solid electrolytes based on CeO<Subscript>2</Subscript> for medium-temperature electrochemical devices

CeO₂-based solid solutions with a fluorite structure are promising materials as electrolytes of medium-temperature electrochemical devices: electrolytic cells, oxygen sensors, and solid oxide fuel cells. In this work, studies are presented of the effect of the dopant cation radius and its concentration on the physico-chemical properties of the Ce_{1 − x} Ln _x O_{2 − δ} solid solutions (x = 0–0.20; Ln = La, Nd, Sm, Eu, Gd, Dy, Ho, Er, Yb) and also of multicomponent solid solutions of Ce_{1 − x} Ln _x/2Ln′ _x/2O_{2 − δ} (x = 0–0.20; Ln = Sm, La, Gd and Ln′ = Dy, Nd, Y) and Ce_{1 − x − y} Sm _x M _y O_{2 − δ} (M = Ca, Sr, Ba) obtained using the solid-phase synthesis technique. Electric properties of the samples were studied in the temperature range of 623–1173 K and in the oxygen partial pressure range of 0.01–10⁻²² MPa. The values of oxygen critical pressure ( p_O2 ^* )\left( {p_{O_2 }^* } \right) are presented, at which the ionic and electron conductivity values are equal. The values were calculated on the basis of experimental dependences at 1023 K at the assumption that the ionic conductivity value is determined only by the dopant concentration and its effective ionic radius and is independent of the oxygen partial pressure.     

Thermal analysis and structural characterization of Bi<Subscript>4</Subscript>V<Subscript>2–x</Subscript>Ba<Subscript>x</Subscript>O<Subscript>11–1.5x</Subscript> (0.02≤<Emphasis Type="Italic">x</Emphasis>≤0.50)

This work reports the study of Bi₄V_2–xBa_xO_11–1.5x (0.02≤x≤0.50) series, which is a potential source of solid electrolytes to apply in oxygen sensors. X-ray powder diffraction was used to point out the formation of major ionic conductive phases and minor ones. The modifications of vanadate substructure were probed, at short range, by Fourier-transform infrared spectroscopy. Differential scanning calorimetry evidenced the formation of tetragonal γ phase, which can be ionic conductive, for x=0.14.     

Effect of Er<Subscript>2</Subscript>O<Subscript>3</Subscript> on thermal stability of oxyfluoride glass

Glasses have been synthesized in the system SiO₂–Al₂O₃–Na₂O–AlF₃–LaF₃–Er₂O₃. A base glass (in mol% 67SiO₂–9Al₂O₃–20Na₂O–Al₂F₆–3La₂F₆) was modified by 0.5, 0.75, 1, 1.25, 1.5, 2 and 5 mol% Er₂O₃, respectively. Glasses were prepared by conventional fusion method from 20 g batches. The glass transition temperature (T _g), the jump-like changes of the specific heat (ΔC _p) accompanying the glass transition and the enthalpy of crystallization (ΔH) were calculated. DTA measurements clearly reveal that the increase of the Er₂O₃ content in the glass changes the effects of crystallization and diminishes the thermal stability of the glassy network. In the same time the changes in the transition temperature are observed. The formation of NaLaF₄ and Na_1.45La_9.31(SiO₄)₆(F_0.9O_1.1) as a main phase was confirmed. The diminishing of the thermal stability was connected with erbium which incorporated into Na_1.45La_9.31(SiO₄)₆(F_0.9O_1.1) structure.     

Non-isothermal kinetics of the thermal decomposition of sodium oxalate Na<Subscript>2</Subscript>C<Subscript>2</Subscript>O<Subscript>4</Subscript>

The thermal transformation of Na₂C₂O₄ was studied in N₂ atmosphere using thermo gravimetric (TG) analysis and differential thermal analysis (DTA). Na₂C₂O₄ and its decomposed product were characterized using a scanning electron microscope (SEM) and the X-ray diffraction technique (XRD). The non-isothermal kinetic of the decomposition was studied by the mean of Ozawa and Kissinger–Akahira–Sunose (KAS) methods. The activation energies (E _α) of Na₂C₂O₄ decomposition were found to be consistent. Decreasing E _α at increased decomposition temperature indicated the multi-step nature of the process. The possible conversion function estimated through the Liqing–Donghua method was ‘cylindrical symmetry (R₂ or F_1/2)’ of the phase boundary mechanism. Thermodynamic functions (ΔH*, ΔG* and ΔS*), calculated by the Activated complex theory and kinetic parameters, indicated that the decomposition step is a high energy pathway and revealed a very hard mechanism.     

Phase formation in the FeVO<Subscript>4</Subscript>–Co<Subscript>3</Subscript>V<Subscript>2</Subscript>O<Subscript>8</Subscript> system

Phase relations in the solid state in the FeVO₄–Co₃V₂O₈ system, in the whole range of components concentration have been studied. It was found that the composition of the phase of the howardevansite type structure, formed in the investigated system, corresponds with the Co_2.616Fe_4.256V₆O₂₄ formula. The phase of the lyonsite type structure has a homogeneity range with the Co_3+1.5xFe_4–xV₆O₂₄ formula (0.476 formula (0.476<x<1.667). The melting temperature and the volume of the unit cell of the lyonsite type structure phase increases together with the rise of cobalt quantity contained in it. Basing on the results of the DTA and XRD measurements a phase diagram of the FeVO_4–Co₃V₂O₈ system up to the solidus line was constructed.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Calculated properties of neutral and charged Al<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Co<Subscript><Emphasis Type="Italic">m</Emphasis></Subscript> clusters by density functional theory

Density functional calculations are performed to study the structures and electronic properties of Al _n Co _m clusters with n = 1–7 and m = 1–2. Frequency analysis is also performed after structural optimization to make sure that the calculated ground states are real minima. The corresponding total and binding energies, adiabatic electron affinities and ionization potentials are presented and discussed to aid the identification of our calculations. The BSSE correction is also considered in our calculation. Among Al _n Co _m , Al _n Co _m ⁻, and Al _n Co _m ⁼ clusters (n = 1–7 and m = 1–2), Al₄Co⁻, Al₆Co⁻, Al₂Co₂, and Al₆Co₂ are predicted to be more stable. Our results are consistent with the available experimental data.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

Electrical conductivity studies in the system Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript>-Li<Subscript>1.33</Subscript>Ti<Subscript>1.67</Subscript>O<Subscript>4</Subscript>

Electrical conductivity in the monoclinic Li₂TiO₃, cubic Li_1.33Ti_1.67O₄, and in their mixture has been studied by impedance spectroscopy in the temperature range 20–730 °C. Li₂TiO₃ shows low lithium ion conductivity, σ₃₀₀≈10^–6 S/cm at 300 °C, whereas Li_1.33Ti_1.67O₄ has 3×10^–8 at 20 °C and 3×10^–4 S/cm at 300 °C. Structural properties are used to discuss the observed conductivity features. The conductivity dependences on temperature in the coordinates of 1000/T versus log_e(σT) are not linear, as the conductivity mechanism changes. Extrinsic and intrinsic conductivity regions are observed. The change in the conductivity mechanism in Li₂TiO₃ at around 500–600 °C is observed and considered as an effect of the first-order phase transition, not reported before. Formation of solid solutions of Li_{2– x} Ti_{1+ x} O₃ above 900 °C significantly increases the conductivity. Irradiation by high-energy (5 MeV) electrons causes defects and the conductivity in Li₂TiO₃ increases exponentially. A dose of 144 MGy yields an increase in conductivity of about 100 times at room temperature. Electronic Publication     

Mixed conductivity and stability of A-site-deficient Sr(Fe,Ti)O<Subscript>3–δ</Subscript> perovskites

Deficiency in the A sublattice of perovskite-type Sr_{1– y} Fe_0.8Ti_0.2O_3–δ (y=0–0.06) leads to suppression of oxygen-vacancy ordering and to increasing oxygen ionic conductivity, unit cell volume, thermal expansion, and stability in CO₂-containing atmospheres. The total electrical conductivity, predominantly p-type electronic in air, decreases with increasing A-site deficiency at 300–700 K and is essentially independent of the cation vacancy concentration at higher temperatures. Oxygen ion transference numbers for Sr_{1– y} Fe_0.8Ti_0.2O_3–δ in air, estimated from the faradaic efficiency and oxygen permeation data, vary in the range from 0.002 to 0.015 at 1073–1223 K, increasing with temperature. The maximum ionic conductivity was observed for Sr_0.97Fe_0.8Ti_0.2O_3–δ ceramics. In the system Sr_0.97Fe_{1– x} Ti _x O_3–δ (x=0.1–0.6), thermal expansion and electron-hole conductivity both decrease with x. Moderate additions of titanium (up to 20%) in Sr_0.97(Fe,Ti)O_3–δ result in higher ionic conductivity and lower activation energy for ionic transport, owing to disordering in the oxygen sublattice; further doping decreases the ionic conduction. It was shown that time degradation of the oxygen permeability, characteristic of Sr(Fe,Ti)O_3–δ membranes and resulting from partial ordering processes, can be reduced by cycling of the oxygen pressure at the membrane permeate side. Thermal expansion coefficients of Sr_{1– y} Ti_{1– x} Fe _x O_3–δ (x=0.10–0.60, y=0–0.06) in air are in the range (11.7–16.5)×10^–6 K^–1 at 350–750 K and (16.6–31.1)×10^–6 K^–1 at 750–1050 K. Electronic Publication     

XAFS investigation of [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>][AuCl<Subscript>4</Subscript>]<Subscript>2</Subscript> and its thermolysis products

Thermolysis of double complex salt [Pd(NH₃)₄][AuCl₄]₂ has been studied in helium atmosphere from ambient to 350 °C. The XAFS of Pd K and Au L₃ edges and thermogravimetry measurements have been carried out to characterize the intermediates and the final product. In the temperature range 115–160 °C the complex is decomposed to form Pd(NH₃)₂Cl₂ and AuCl_4−x N _x species with x ranging from 2 to 3. Subsequent heating of the intermediate up to 300 °C leads to the total loss of NH₃. The Au–Cl and Au–Au bonds form the local environment of Au at the stage of decomposition while only four chlorine atoms are around Pd. At the temperature of 330 °C the Au and Pd nanoparticles as well as residues of palladium chloride are detected. The final product consists of separated Au and Pd nanoparticles.     

Structure of heteroassociates formed in the HF-(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>2</Subscript>O liquid system

The aim of this work was to determine the structure of stable heteroassociates (HAs) with the stoichiometric ratios 1:2, 2:1, and 4:1 of molecules formed in the HF-(C₂H₅)₂O binary liquid system. The stretching frequencies of HF molecules found for each HA using a special procedure for processing IR spectra were compared with the calculated frequencies V HF of the stable molecular complexes (HF)_m ((C₂H₅)₂O)_n (m = 1, 2, 4, 8; n = 1, 2) with different topologies by the density functional method (B3LYP/6-31++G(d,p)). As a result, it was shown that the most stable (among H-bonded complexes with the same stoichiometric ratio of molecules) HAs HF((C₂H₅)₂O)₂, (HF)₄ ((C₂H₅)₂O)₂, and (HF)₈-((C₂H₅)₂O)₂ formed in HF solutions in diethyl ether. All of them had a cyclic structure and a common peculiarity of structure: only one lone electron pair of the oxygen atom of the (C₂H₅)₂O molecules is involved in hydrogen bonding.     

Synthesis and structure of the polymeric complex [Ag<Subscript>2</Subscript>(Ph<Subscript>3</Subscript>P)<Subscript>2</Subscript>B<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

A method for the synthesis of the silver(I) complex with the closo-decaborate anion and triphenylphosphine [Ag₂(Ph₃P)₂B₁₀H₁₀] _n was developed and the structure of this complex was studied. The polymeric chain of the complex is formed with participation of Ag(I) atoms, which coordinate the B₁₀H₁₀²⁻ anions through the apical (B(1)–B(2), B(9)–B(10)) and equatorial (B(3)–B(6), B(5)–B(8)) edges, the metalligand bonding occurring through three-center two-electron bonds (MHB). The P atoms of two triphenylphosphine molecules are also incorporated in the inner coordination sphere of the metal: the CN of the silver atom is 4 + 1.     

Thermal behaviour and fragility of Sb<Subscript>2</Subscript>O<Subscript>3</Subscript>-containing zinc borophosphate glasses

Thermal behaviour of the glass series (100-x)[50ZnO-10B₂O₃-40P₂O₅]·xSb₂O₃ (x=0-42 mol%) and (100-y)[60ZnO-10B₂O₃-30P₂O₅]·ySb₂O₃ (y=0-28 mol%) was investigated by DSC and TMA. The addition of Sb₂O₃ results in a decrease of the glass transition temperature and crystallization temperature in both compositional series. All glasses crystallize on heating in the temperature range of 522–632°C. Thermal expansion coefficient of the glasses monotonously increases with increasing Sb₂O₃ content in both series and varies within the range of 6.6–11.7 ppm °C⁻¹. From changes of thermal capacity within the glass transition region it was concluded that with increasing Sb₂O₃ content the ‘fragility’ of the studied glasses increases.     

Theoretical Study of the Structures,Properties and Spectroscopies on Fullerene Hydrides C<Subscript>26</Subscript>H<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 2, 4, 6, 8)

The structures, stability patterns of C₂₆H _n (n = 2) formed from the initial D _3h C₂₆ fullerene were investigated by use of second-order-Moller–Plesset perturbation theory. The study of the stability patterns of hydrogenation reaction on C₂₆ cage revealed that type (β) carbons were the active site and the analyses of π-orbital axis vector indicated that the reactivity of C₂₆ was the result of the high strain and the hydrogenation reaction on C₂₆ cage was highly exothermic. The calculated ¹³C NMR spectra of C₂₆H _n (n = 2) predicted that the two sp ³ hybridization carbons in C₂₆H _n (n = 2) obviously moved to high field compare with that in D _3h C₂₆. Hence, the C₂₆H₂ should be obtained and detected experimentally. Similarly, the structures and reaction energies of C₂₆H _n (n = 4, 6, 8) were further studied at HF/6-31G*, B3LPY/6-31G* and MP2/6-31G* level. The results suggested the hydrogenation products of C₂₆, C₂₆H _n (n = 4, 6, 8), were more stable than the C₂₆ cage.     

Steric effects on the singlet-triplet energy gaps of five-membered ring R<Subscript>2</Subscript>C<Subscript>4</Subscript>H<Subscript>2</Subscript>M

Thermal internal energy gaps, ΔE _s−t; enthalpy gaps, ΔH _s−t; Gibbs free energy gaps, ΔD _s−t, between singlet (s) and triplet (t) states of R₂C₄H₂M (M = C, Si, and Ge) were calculated at B3LYP/6-311++G** level of theory. The ΔG _s−t of R₂C₄H₂C was increased in the order (in kcal/mol): R = −CH₃ (−10.51) > −H (−9.59) > i-Pr (−9.51) > t-Bu (−8.98). While, the ΔG _s−t of R₂C₄H₂Si and R₂C₄H₂Ge were increased in the order (in kcal/mol): −CH₃ (17.01) > i-Pr (15.30) > −H (15.26) > t-Bu (14.35) and -H (22.79) > −CH₃ (22.69) > i-Pr (21.66) > t-Bu (21.01), respectively.