2-硝基-4-氯-2'-羟基-3'-特丁基- 5'-甲基偶氮苯的固相合成

2-硝基-4-氯-2'-羟基-3'-特丁基- 5'-甲基偶氮苯的固相合成;硝基氯羟基特丁基甲基偶氮苯;固相合成;重氮偶合     

2-（2-喹啉偶氮）-1，5-二氨基苯固相萃取光度法测定痕量钯

根据2-（2-喹啉偶氮）-1,5-二氨基苯（QADAB）与钯的显色反应及MCI—GEL反相固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量钯的方法。在0．2～3.0mol·L^-1高氯酸介质中,溴化十六烷基三甲胺（CTMAB）存在下,QADAB与钯反应生成2：1稳定络合物,该络合物可被MCI—GEL反相固相萃取小柱萃取富集,富集的络合物用丙酮洗脱后用光度法测定,在丙酮介质中体系的最大吸收波长为600nm,表观摩尔吸光率为9．63×10^4L·mol^-1·cm^-1。钯质量浓度在0．01～1.5mg·L^-1内符合比耳定律,方法用于几种实样中痕量钯的测定,测得回收率在86％～96％间。     

KBF4非等温固-固相变热性质的测定

利用DTA-TG和DSC热分析技术研究了无机塑晶材料KBF4固-固相变的热性能,测得转变温度为284.13℃,转变焓为105.73J/g.KBF4固-固相变的机理是随着温度的升高,晶体中离子键部分断裂,晶体逐渐由低对称的正交晶系向高对称立方晶系转变,并在这过程中,同时引入化学键的振动和转动无序,从而吸收大量的相变焓.     

聚乙二醇单甲醚(MPEG)/聚乙烯醇(PVA)高分子固-固相变材料的合成与性能

高分子固-固相转变材料是近年来新兴的课题,其主要优点是体积变化小,发生相转变时不出现液态,可以减少对容器的要求,甚至不需要容器即可把相变材料作为结构材料,可简化工艺和降低成本,我们相继合成了系列聚乙二醇／聚乙烯醇高分子固-固相变材料,由于形成交联网络结构,难溶于一般有机溶剂。     

1-苯基-3-甲基-5-吡唑啉酮与二羰基化合物的固相反应研究

报道了苯偶酰及其衍生物、对二甲氨基苯偶姻、邻苯二甲酰亚胺与1-苯基-3-甲基-5-吡唑啉酮的固相热反应研究;这个热反应以较高的选择性生成1:1缩合产物的一种异构体,通过IR、^{1HNMR、MS和元素分析确定了新产物的结构,并通过X射线衍射分析确定了其中一个产物的构型。}     

接枝共聚法制备聚乙二醇(PEG)/聚乙烯醇(PVA)高分子固-固相变材料性能研究

用接枝共聚法将具有相变特征的聚乙二醇(PEG)接枝到具有较高熔点的聚乙烯醇(PVA)主链上,得到了系列性能稳定的PEG/PVA高分子固-固相转变材料,用DSC,WAXD和POM对其相变行为及形态结构进行了研究.结果表明,该材料呈现出可逆的固-固相转变特性;其结晶峰值温度和相变焓比纯PEG低,接枝率对相变温度和归一化相变焓影响不大;接枝率只影响结晶与熔融行为,不影响结晶结构.     

2,2-二羟甲基-1,3-丙二醇在275-510 K间的热容和相变

许多多元醇在270-500K间具有相变焓很大的固-固相变,是一类潜在的固-固相变低温储能物质。2,2-二羟甲基-1,3-丙二醇是一种重要的多元醇,除在化工方面有广泛的应用外,在低温储能方面也有相当乐观的开发前景。它的有关热性质虽已有一些DSC研究报道,但数据精度较差并缺乏系统性。作为系统研究多元醇及其固体溶液热力学性质工作的一部份,本文将报道2,2-二羟甲基-1,3-丙二醇在275—500K间的热容和相变,并根据所测其固-固相变焓数据讨论该物质被破坏的平均氢键键能。     

β-环糊精的固载及其应用最新研究进展

环糊精由于其优异的结构特征和物理化学性质,已成为构筑各种功能材料的优良结构单元.本综述以β-环糊精的共价固载为主,详细综述了目前β-环糊精的固载及其应用最新研究进展,主要包括固载化β-环糊精在环境污染物吸附、药物分子的负载和缓释、分析检测、手性分离、催化、织物整理和表面功能化等领域的应用.上述各部分,根据载体或应用方式的不同,系统介绍了β-环糊精的固载及固载化β-环糊精的性能.指出固载化β-环糊精在催化和表面功能化领域的应用虽然目前还处于起步阶段,却极具研究价值,对固载化β-环糊精进一步的功能化是今后基于β-环糊精构筑超分子仿生催化体系的主要研究方向.     

分子印迹固相萃取-气相色谱-质谱法测定猪尿中4种β-受体激动剂

建立了分子印迹固相萃取结合气相色谱-质谱测定猪尿中β-受体激动剂氯丙那林、马步特罗、克伦特罗、莱克多巴胺的方法.应用分子印迹柱富集并净化猪尿液中4种β-受体激动剂,比较了分子印迹固相萃取与常规固相萃取的净化效果.通过BSTFA-1％ TMS硅烷化衍生,氘代克伦特罗和氘代莱克多巴胺为校正内标,气相色谱-质谱测定.在优化条...     

二苯并-18-冠-6在交联聚乙烯醇微球表面的固载化

通过氯甲基化反应,将冠醚二苯并-18-冠-6(DBC)转变为氯甲基化的冠醚(CMDBC),使交联聚乙烯醇(CPVA)微球表面的羟基与CMDBC之间发生亲核取代反应,从而实现冠醚的固栽化,制得了固载有冠醚的功能微球DBC-CPVA.在建立了冠醚DBC固载量测定方法(溴百里香酚蓝-固相萃取法)的基础上,重点研究了主要因素对DBC固栽化过程的影响规律.结果表明:反应温度与溶剂性质对DBC在CPVA微球上的固载化反应有较大的影响,在70℃极性较强的N,N-二甲基甲酰胺(DMF)溶剂中,可制得冠醚DBC固载量为1.72 mmol/g的DBC-CPVA功能微球.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.