Development of a tabletop time-of-flight mass spectrometer with an ion attachment ionization technique

We report a new type of mass spectrometry based on a time-of-flight mass spectrometer combined with an ion attachment ionization technique (IA-TOF). In contrast to electron ionization mass spectra, IA-TOF mass spectra are not complicated by peaks due to fragmentation of the molecular ion; the adduct ion formed in IA does not fragment. We developed a tabletop IA-TOF system and evaluated its performance by analyzing specimens originally in the gas, liquid, and solid phases. We obtained fragment-free spectra covering a mass range up to m/z 3400 with a mass resolution of about 4700. Our IA-TOF system realizes accurate and versatile real-time mass spectrometry.     

Technological Advancements in Mass Spectrometry and Its Impact on Proteomics

Amalgamation of mass spectrometry (MS) and proteomics has led to the most awaited technological inventions such as discovery of clinically potential biomarkers and generation of effective drugs. This review focuses on the synergistic growth in MS instrumentation, proteomics and its impact on biomedical sciences. Novel ionization methods: surface enhanced laser desorption ionization, electrospray assisted laser desorption ionization, desorption electrospray ionization, laser diode thermal desorption are discussed. Different mass analyzers: ion trap, time-of-flight, Fourier transform ion cyclotron resonance and their applications are outlined. New ion fragmentation techniques: electron capture dissociation, electron transfer dissociation, infrared multiphoton dissociation and their attributes are described.     

Laser desorption ionization and MALDI time-of-flight mass spectrometry for low molecular mass polyethylene analysis

Polyethylene's inert nature and difficulty to dissolve in conventional solvents at room temperature present special problems for sample preparation and ionization in mass spectrometric analysis. We present a study of ionization behavior of several polyethylene samples with molecular masses up to 4000 Da in laser desorption ionization (LDI) time-of-flight mass spectrometers equipped with a 337 nm laser beam. We demonstrate unequivocally that silver or copper ion attachment to saturated polyethylene can occur in the gas phase during the UV LDI process. In LDI spectra of polyethylene with molecular masses above approximately 1000 Da, low mass ions corresponding to metal-alkene structures are observed in addition to the principal distribution. By interrogating a well-characterized polyethylene sample and a long chain alkane, C94H190, these low mass ions are determined to be the fragmentation products of the intact metal-polyethylene adduct ions. It is further illustrated that fragmentation can be reduced by adding matrix molecules to the sample preparation.     

Isotope determination of lead and bismuth by pulsed laser evaporation and resonance ionization time-of-flight mass spectrometry

Pulsed laser evaporation coupled with resonance ionization time-of-flight mass spectrometry has been used to measure the isotopic abundance of lead and bismuth. A pulsed Nd:YAG laser was used to evaporate the metal atoms, the evaporated atoms were then detected by one color two photon resonance ionization and time-of-flight mass spectrometry. The arrival time distributions of atoms evaporated by pulsed laser, and the isotopic abundances of Pb and Bi were measured. Our results show that this method is good enough for measuring the isotopic abundances of Pb and Bi with high sensitivity and selectivity.     

Photodissociation of high molecular weight peptides and proteins in a two-stage linear time-of-flight mass spectrometer

A two-stage linear time-of-flight mass spectrometer is used to investigate the requirements for performance of laser photodissociation of peptide and protein ions. Results are presented that demonstrate that desorption and dissociation laser pulses can be synchronized to irradiate ions that travel at high velocities down the drift tube of a time-of-flight mass spectrometer. For example, 193-nm photodissociation of bovine insulin and doubly charged lysozyme is demonstrated, and laser power studies suggest that dissociation is initiated by the absorption of a single 193-nm photon. These results are encouraging because they suggest that laser photodissociation of high molecular weight proteins can lead to fragmentation on time scales compatible with time-of-flight mass spectrometry.     

Laser-induced electron impact ionization in a reflectron time-of-flight mass spectrometer

Some details of the generation of electrons by impinging a laser beam on a metal surface are described. It is shown that highly efficient electron generation is observed only during the laser pulse. Therefore, this technique delivers intense pulses of electrons. The process is investigated and different ion source set-ups are discussed. In conjunction with a time-of-flight mass spectrometer this technique can be used to produce mass spectra of different samples ranging from simple organic molecules to peptides.     

The Orbitrap mass analyzer with direct ion injection interfaced to a laser desorption/ionization ion source

The results of a study on interfacing an Orbitrap mass analyzer with direct ion injection to a surface assisted laser desorption/ionization (SALDI) ion source are presented. Osmium complexes with 8-mercaptoquinoline were studied. Titanium oxide thin films prepared by electron beam evaporation were found an effective emitter of the ions of the test complexes. It was demonstrated that interfacing the Orbitrap mass analyzer to a SALDI source can significantly improve the analytical performance of this method in comparison to a typical combination of SALDI/time-of-flight mass spectrometer.     

Alkali cation attachment to derivatized fullerenes studied by matrix-assisted laser desorption/ionization

The complexation of alkali metal ions with amphiphilic fullerene derivatives has been investigated by matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry. The formation of analyte ions occurs via two competing mechanisms including electron transfer from matrix-derived ions and metal ion attachment. The interplay of these processes has been examined by laser fluence dependent sample activation and by variation of the target composition. The attachment of metal ions has been established as the gentler and thus more efficient route towards the formation of intact analyte ions. Investigations into the metal ion complexation have been conducted to reveal the reactivity order of the alkali metals in these reactions and to elucidate the influence of structural differences of the analytes, as well as to unravel effects caused by the anionic counter ion of the metal. The experimental data have been derived by two complementary approaches. Competing reactants were either studied simultaneously, so that the product distribution would provide direct insight into the reactivity pattern, and/or product distributions were obtained in a large variety of separate experiments and normalized for reliable comparison. It has been found that the extent to which complexation is observed follows the charge density order of the alkali metal ions. The structural features of the fullerene-attached ligands were of profound influence on the attachment of the metal ion, inducing enhanced selectivity for the complexation with less reactive metals. The metal ion attachment is reduced with the use of smaller anionic counter ions. Rationalization of these findings is provided within the framework of the mechanisms of ion formation in MALDI.     

Analysis of polycyclic aromatic hydrocarbon sequences in a premixed laminar flame by on-line time-of-flight mass spectrometry

A time-of-flight mass spectrometer in reflectron configuration has been used for the real-time detection of combustion products. The products of a premixed laminar C2H4/O2 flame at atmospheric pressure were sampled along its axis, diluted with inert gas and carried to the ion source as a molecular beam under minimal perturbation. Electron ionization and different optical ionization sources are compared. Photoionization was achieved with laser radiation from a Nd:YAG nanosecond pulsed laser at two different wavelengths in the UV range (266 and 355 nm). The mass spectra obtained using laser wavelength of 355 nm and electron ionization present a series of ions regularly spaced by 18 m/z units up to m/z 2000. This series allowed precise calibration of the instrument for compounds of high molecular weight. Information on the chemical nature of the analyzed species has been obtained by comparing mass spectra produced with different ionization methods. In order to better understand the growth mechanisms, polycyclic aromatic hydrocarbon sequences have been analyzed by fast Fourier transform of the mass spectra.     

Direct chemical analysis of uv laser ablation products of organic polymers by using selective ion monitoring mode in gas chromatography/mass spectrometry

Trace quantities of laser ablated organic polymers were analyzed by using commercial capillary column gas chromatography/mass spectrometry; the instrument was modified so that the iaser ablation products could be introduced into the capillary column directly and the constituents of each peak in the chromatogram were identified by using a mass spectrometer. The present study takes advantage of the selective ion monitoring mode for significantly improving the sensitivity of the mass spectrometer as a detector, which is critical in anatyzing the trace quantities and confirming the presence or absence of the species of interest in laser ablated polymers. The initial composition of the laser ablated polymers was obtained by using an electron impact reflectron time-of-flight mass spectrometer and the possible structure of the fragments observed in the spectra was proposed based on the structure of the polymers.     

Wavelength dependence of matrix-assisted laser desorption and ionization using a tunable mid-infrared laser

Matrix-assisted laser desorption and ionization by infrared laser (IR-MALDI) is expected to be an effective methods for soft-ionization of high-molecular weight proteins and intracellular proteins. IR-MALDI is not widely used because its low sensitivity, complexity, high cost, and as it does not work well on commercial MALDI time-of-flight mass spectrometers (TOFMSs). We employed a tunable mid-infrared (MIR) laser as a light source for MALDI to investigate the IR-MALDI. The laser wavelength can be tuned within a range from 5.5 to 10.0 μm, and included several biomaterial group vibration modes. We evaluated the wavelength dependence of ionization in IR-MALDI for four matrices: succinic acid, urea, 3,5-dimethoxy-4-hydroxycinnamic acid (sinapic acid) and 2,5-dihydroxybenzoic acid (DHB). These matrices contained various groups of vibration modes, and absorbed an infrared (IR) energy at a specific wavelength. The mass spectra of angiotensin II was obtained at a specific wavelength corresponding to the CO stretching and benzene ring vibration mode. In IR-MALDI, we considered the strong molecular bond attracting an electron from a neighboring hydrogen atom, possibly protonating the hydrogen atom.     

碳纳米管激光等离子体的质谱研究

The time-of-flight mass spectra of carbon nanotube plasma produced by laser was first investigated in this paper. We found the hemi-spherical tips of carbon nanotube were easily fragmentated and aggregated into fullerenes between Coo arid C_(174) in high laser fluence.     

Hot cell based time-of-flight mass spectrometry

A time-of-flight mass spectrometer has been designed and is presently being installed within a radiological controlled hot cell at Argonne National Laboratory-West. Direct solid sampling is performed by laser ablation or glow discharge sputtering followed by supersonic expansion into the TOFMS source chamber. Once the atom/ion beam enters the source chamber, enhanced ionization can be accomplished by laser ionization or electron impact. An assortment of samples may be analyzed ranging from irradiated nuclear fuel elements and cladding materials to eutectic salts, radioactive waste materials and environmental samples.     

The characterization of selected drugs with infrared laser desorption/tunable synchrotron vacuum ultraviolet photoionization mass spectrometry

Some selected drugs including captopril, fudosteine and racecadotril have been analyzed by infrared (IR) laser desorption/tunable synchrotron vacuum ultraviolet (VUV) photoionization mass spectrometry (PIMS). The molecular ions of captopril and racecadotril are exclusively observed without any fragments at near threshold single-photon ionization (SPI). However, fudosteine easily forms fragments even at a photon energy near the ionization threshold, indicating the instability of its molecular ion. For these drugs, a number of fragments are yielded with the increase of photon energy. The structures of such fragments proposed by IR LD/VUV PIMS are supported by electron ionization time-of-flight mass spectrometry (EI-TOFMS) results. Fragmentation pathways are discussed in detail.     

Direct sampling time-of-flight mass spectrometers for technological analysis

The practicability of direct sampling time-of-flight mass spectrometers for routine technological analysis is considered. The discussed set incorporates two TOF instruments together covering analysis of solid, liquid, and gas samples without the need for time consuming sample preparation. Both an electron ionization reflectron TOF mass analyzer designed for the analysis of gas and liquid samples and a laser ionization axial electrostatic TOF mass analyzer designed for analysis of solid and powder samples use a single system for data acquisition, collection and processing. These instruments achieve ng/g range sensitivity and mass resolution exceeding 1000. Because of its compact design the system also can be realized as a mobile laboratory for on-site analysis. Prospects for applying the instruments to different technological applications are discussed. Received: 17 July 1997 / Revised: 28 November 1997 / Accepted: 22 December 1997     

激光等离子体中超金属氧化物离子LiZnO+的产生

作为一般规律 ,在一些具有热力学稳定性的氧化物分子中 ,氧原子周围共价电子数为 8.自从发现 Li3O和 Li4 O分子以来 ,这类超过 9个或更多共价电子的含金属团簇小分子呈现出来的特殊化学计量比和热力学稳定性引起人们的关注 ,人们称其为超共价分子 (Hypervalent Molecules)或超金属分子(Hypermetallic Molecules) [1～ 4 ] .目前 ,在实验上已发现了 Mn O,Mn S及 Mn C(M=Li,Na,K,Mg;n≥ 3 )等一系列超金属分子 ;在理论上 ,从头计算法已可计算出超金属分子的结构及其稳定性 ,使人们对这些超金属分子的产生与结构有一定的认识 .然而 ,由…     

Multidimensional analytical method based on binary phase shaping of femtosecond pulses

Multidimensional chemical detection and identification based on phase shaped femtosecond laser pulses coupled to mass spectrometry is demonstrated. The method based on binary phase shaping (BPS) takes into account the accuracy and precision standards required by analytical chemistry. It couples multiphoton intrapulse interference of ultrashort laser pulses with time-of-flight mass spectrometry (TOF-MS). We demonstrate that BPS-MS provides a rigorous multidimensional technique for the detection and identification of analogues to chemical agents and mixtures in real time. Experimental results on dimethyl phosphite and pyridine illustrate the new approach toward the real-time accurate detection and identification of chemical compounds including isomers.     

Attachment of alkali cations on beta-D-glucopyranose: matrix-assisted laser desorption/ionization time-of-flight studies and ab initio calculations

In matrix-assisted laser desorption/ionization mass spectrometry, carbohydrates ionize by attachment of an alkali cation, and the ion yield varies with the nature of the cation. In an attempt to contribute to the understanding of the mechanisms involved, we have conducted matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) experiments on the simple glucose molecule with the alkali cations Li+, Na+ and K+, and have also performed ab initio calculations. The calculations show that, for the most stable carbohydrate-cation geometry, the carbohydrate ring is twisted and the cation is coordinated to four oxygen atoms. Calculations also show that in these complexes the positions of the three cations are very similar, and the smaller the cation, the closer it is to the oxygen atoms. Finally, the calculated formation enthalpies of the different complexes agree with the experimental results obtained for the order of stability of these complexes.     

Direct sampling time-of-flight mass spectrometers for technological analysis

The practicability of direct sampling time-of-flight mass spectrometers for routine technological analysis is considered. The discussed set incorporates two TOF instruments together covering analysis of solid, liquid, and gas samples without the need for time consuming sample preparation. Both an electron ionization reflectron TOF mass analyzer designed for the analysis of gas and liquid samples and a laser ionization axial electrostatic TOF mass analyzer designed for analysis of solid and powder samples use a single system for data acquisition, collection and processing. These instruments achieve ng/g range sensitivity and mass resolution exceeding 1000. Because of its compact design the system also can be realized as a mobile laboratory for on-site analysis. Prospects for applying the instruments to different technological applications are discussed. Received: 17 July 1997 / Revised: 28 November 1997 / Accepted: 22 December 1997     

A collinear tandem time-of-flight mass spectrometer for infrared photodissociation spectroscopy of mass-selected ions

An apparatus based on collinear tandem time-of-flight mass spectrometer has been designed for the measurement of infrared photodissociation spectroscopy of mass-selected ions in the gas phase.The ions from a pulsed laser vaporization supersonic ion source are skimmed and mass separated by a Wiley-McLaren time-of-flight mass spectrometer.The ion of interest is mass selected,decelerated and dissociated by a tunable IR laser.The fragment and parent ions are reaccelerated and mass analyzed by the second time-of-flight mass spectrometer.A simple new assembly integrated with mass gate,deceleration and reacceleration ion optics was designed,which allows us to measure the infrared spectra of mass selected ions with high sensitivity and easy timing synchronization.