Ultrasound-assisted cyanide extraction of gold from gold concentrate at low temperature

A sonochemical reactor was developed to study the ultrasound-assisted cyanide extraction of gold from gold ore at low temperature. The effects of ultrasound on gold leaching in low temperature and conventional conditions were investigated. At the low temperature of 10 °C, ultrasound-assisted extraction increased extraction rate of gold by 0.6%–0.8% and reduced the gold content of cyanide tailings to 0.28 g/t in the leaching of gold concentrate and cyanide tailings, respectively. At the conventional temperature of 25 °C, ultrasound-assisted extraction obtained a 0.1% higher extraction rate of gold compared with conventional extraction, with the unit consumption of NaCN reduction of 15%. The analysis of kinetic model also demonstrated that sonication indeed improved the reaction of gold leaching greatly. The mineralogy and morphology of ore were further analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) and particle size analyzer to explore the strengthening mechanism of gold leaching. The results showed that the ore particles were smashed, the ore particle surface was peeled, the passive film was destroyed and the reaction resistance decreased under ultrasonic processing. Therefore, the extraction rate of gold was improved and the extraction time was shortened significantly in ultrasound-assisted cyanide extraction.     

Sonochemically preparation and characterization of bimetallic Ni-Co/Al2O3-ZrO2 nanocatalyst: Effects of ultrasound irradiation time and power on catalytic properties and activity in dry reforming of CH4

The catalytic performance of nanostructured Ni-Co/Al₂O₃-ZrO₂ catalysts, prepared by ultrasound-assisted impregnation method was examined in the dry reforming of methane. The effect of irradiation power and irradiation time have been studied by changing time (0, 20, 80 min) and power of the sonication (30, 60, 90 W) during the synthesis which resulted in different physiochemical properties of the nanocatalyst. The nanocatalysts were characterized by XRD, FESEM, PSD, EDX, TEM, TPR-H₂, BET, FTIR and TG analyses. Based on the characterization results, ultrasound treatment endowed the sample with more uniform and smaller nanoparticles; higher surface area, stronger metal-support interaction and more homogenous dispersion. Moreover, the analyses exhibited smaller particles with higher surface area and less population of particle aggregates at longer and highly irradiated nanocatalysts. The nanocatalyst irradiated at 90 W for 80 min (the longest irradiation time and the most intense power) showed a uniform morphology and a very narrow particles size distribution. More than 65% of particles of this nanocatalyst were in the range of 10–30 nm. Activity tests demonstrated that employing ultrasound irradiation during impregnation improves feed conversion and products yield, reaching values close to equilibrium. Among sonicated nanocatalysts, with increasing power and time of irradiation, the nanocatalyst represents higher activity. The superior performance amongst the various bimetallic catalysts tested was observed over the catalyst with 90 W and 80 min ultrasonic irradiation which is stable in 24 h time on stream test. The excellent anti-coking performance of this bimetallic catalyst, confirmed by TG and FESEM analyses of spent catalyst, is closely related to the promoting effect of sonication on the metal-support interaction, Ni dispersion and particle size; and probably, the synergy between metallic species.     

Limited damage of tissue mimic caused by a collapsing bubble under low-frequency ultrasound exposure

In this study, we investigated the bubble induced serious damage to tissue mimic exposed to 27-kHz ultrasound. The initial bubble radius ranged from 80 to 100 μm, which corresponded approximately to the experimentally-evaluated resonant radius of the given ultrasound frequency. The tissue mimic consisted of 10 wt% gelatine gel covered with cultured canine kidney epithelial cells. The collapsing bubble behaviour during the ultrasound exposure with negative peak pressures of several hundred kPa was captured by a high-speed camera system. After ultrasound exposure, a cell viability test was conducted based on microscopic bright-field images and fluorescence images for living and dead cells. In the viability test, cells played a role in indicating the damaged area. The bubble oscillations killed the cells, and on occasion detached layers of cultured cells from the gel. The damaged area was comparable or slightly larger than the initial bubble size, and smaller than the maximum bubble size. We concluded that only a small area in close proximity to the bubble could be damaged even above transient cavitation threshold.     

In-situ synchrotron X-ray imaging of ultrasound (US)-generated bubbles: Influence of US frequency on microbubble cavitation for membrane fouling remediation

Gaining an in-depth understanding of the characteristics and dynamics of ultrasound (US)--generated bubbles is crucial to effectively remediate membrane fouling. The goal of present study is to conduct in-situ visualization of US-generated microbubbles in water to examine the influence of US frequency on the dynamics of microbubbles. This study utilized synchrotron in-line phase contrast imaging (In-line PCI) available at the biomedical imaging and therapy (BMIT) beamlines at the Canadian Light Source (CLS) to enhance the contrast of liquid/air interfaces at different US frequencies of 20, 28 and 40 KHz at 60 Watts. A high-speed camera was used to capture 2,000 frames per second of the bubble cavitation generated in water under the ultrasound influence. Key parameters at the polychromatic beamlines were optimized to maximize the phase contrast of gas/liquid of the microbubbles with a minimum size of 5.5 µm. ImageJ software was used to analyze the bubble characteristics and their behavior under the US exposure including the microbubble number, size, and fraction of the total area occupied by the bubbles at each US frequency. Furthermore, the bubble characteristics over the US exposure time and at different distances from the transducer were studied. The qualitative and quantitative data analyses showed that the microbubble number or size did not change over time; however, it was observed that most bubbles were created at the middle of the frames and close to the US field. The number of bubbles created under the US exposure increased with the frequency from 20 kHz to 40 kHz (about 4.6 times). However, larger bubbles were generated at 20 kHz such that the average bubble radius at 20 kHz was about 6.8 times of that at 40 kHz. Microbubble movement/traveling through water was monitored, and it was observed that the bubble velocity increased as the frequency was increased from 20 kHz to 40 kHz. The small bubbles moved faster, and the majority of them traveled upward towards the US transducer location. The growth pattern (a correlation between the mean growth ratio and the exposure time) of bubbles at 20 kHz and 60 W was obtained by tracking the oscillation of 22 representative microbubbles over the 700 ms of imaging. The mean growth ratio model was also obtained.     

Ultrasound-assisted solution crystallization of fotagliptin benzoate: Process intensification and crystal product optimization

The ultrasound-assisted crystallization process has promising potentials for improving process efficiency and modifying crystalline product properties. In this work, the crystallization process of fotagliptin benzoate methanol solvate (FBMS) was investigated to improve powder properties and downstream desolvation/drying performance. The direct cooling/antisolvent crystallization process was conducted and then optimized with the assistance of ultrasonic irradiation and seeding strategy. Direct cooling/antisolvent crystallization and seeding crystallization processes resulted in needle-like crystals which are undesirable for downstream processing. In contrast, the ultrasound-assisted crystallization process produced rod-like crystals and reduced the crystal size to facilitate the desolvation of FBMS. The metastable zone width (MSZW), induction time, crystal size, morphology, and process yield were studied comprehensively. The results showed that both the seeding and ultrasound-assisted crystallization process (without seeds) can improve the process yield and the ultrasound could effectively reduce the crystal size, narrow the MSZW, and shorten the induction time. Through comparing the drying dynamics of the FBMS, the small rod-shaped crystals with a mean size of 9.6 μm produced by ultrasonic irradiation can be completely desolvated within 20 h, while the desolvation time of long needle crystals with an average size of about 157 μm obtained by direct cooling/antisolvent crystallization and seeding crystallization processes is more than 80 h. Thus the crystal size and morphology were found to be the key factors affecting the desolvation kinetics and the smaller size produced by using ultrasound can benefit the intensification of the drying process. Overall, the ultrasound-assisted crystallization showed a full improvement including crystal properties and process efficiency during the preparation of fotagliptin benzoate desolvated crystals.     

Efficient removal of crystal violet and methylene blue from wastewater by ultrasound nanoparticles Cu-MOF in comparison with mechanosynthesis method

The present investigation reports the synthesis of CuBTC (BTC = 1,3,5-benzenetricarboxylate) metal–organic frameworks (MOFs) under solid-state conditions and ultrasound irradiation. Herein, we study uptake and release properties of crystal violet (CV) and methylene blue (MB) from ultrasound nano-CuBTC MOF in comparison with mechanosynthesis method (bulk structure). The ultrasound-assisted methods give a decrease in the surface area as calculated from the reduced nitrogen adsorption capability. In comparison, the uptake of guest molecules on ultrasound nano-CuBTC is remarkable and clearly exceeds that of bulk structure in the aqueous solution of guests. In bulk compound the channel length is increased so that the amount of adsorption is decreased a little. The small guest enters and leaves the cavity rapidly, whereas larger guests enter slowly due to their size relative to the size of the gaps in the capsule. As a result, the uptake and release of MB from CuBTC is faster than that of CV.     

Trivalent manganese as an environmentally friendly oxidizing reagent for microwave- and ultrasound-assisted chemical oxygen demand determination

In the present work manganese(III) has been used as oxidant and microwave radiation and ultrasound energy have been assessed to speed up and to improve the efficiency of digestion step for the determination of chemical oxygen demand (COD). Microwave (MW) and ultrasound-assisted COD determination methods have been optimized by means of experimental design and the optimum conditions are: 40 psi pressure, 855 W power and 1 min irradiation time; and 90% of maximum nominal power (180 W), 0.9 s (s^?1) cycles and 1 min irradiation time for microwaves and ultrasound, respectively. Chloride ion interference is removed as hydrochloric acid gas from acidified sample solutions at 150 °C in a closed reaction tube and captured by bismuth-based adsorbent suspended above the heated solution. Under optimum conditions, the evaluated assisted digestion methods have been successfully applied, with the exception of pyridine, to several pure organic compounds and two reference materials. COD recoveries obtained with MW and ultrasound-assisted digestion for five real wastewater samples were ranged between 86–97% and 68–91%, respectively, of the values obtained with the classical method (open reflux) used as reference, with relative standard deviation lower than 4% in most cases. Thus, the Mn(III) microwave-assisted digestion method seems to be an interesting and promising alternative to conventional COD digestion methods since it is faster and more environmentally friendly than the ones used for the same purpose.     

Intensification of ultrasound-assisted process for the preparation of spindle-shape sodium zinc molybdate nanoparticles

In the present work, sodium zinc molybdate (SZM) nanoparticles were prepared using conventional and an innovative ultrasound assisted co-precipitation of sodium molybdate, zinc oxide and HNO₃ at different temperatures. Prepared product was characterized by XRD, TEM, FT-IR, particle size distribution (PSD), TGA and DTA techniques. TEM analysis shows the spindle-shaped morphology of the formed SZM nanoparticles. The average particle size of SZM nanoparticles is found to be lower in case of sonochemical method (78.3 nm) compared to conventional method (340.2 nm) which is attributed to faster solute transfer rate due to ultrasonic irradiation leading to rapid nucleation and restricted growth of SZM nanoparticles. Further, the kinetics of synthesis of SZM nanoparticles are studied using the sonochemical method at different operating temperature and conventional method at 80 °C. It is shown that the rate of reaction is significantly faster at 40 °C compared to other temperatures and also conventional method. This can be attributed to intense cavity collapse at lower temperature (low vapour pressure) compared to higher temperature (high vapour pressure) of the reaction mixture.     

亚硫酸盐溶液中氧气泡吸收过程的实验研究

采用CCD对单个氧气泡在亚硫酸钠溶液中的吸收过程进行拍照,并用软件进行图像边界识别来研究单个纯氧气泡同亚硫酸钠溶液发生的强制氧化反应过程。实验结果表明反应速度与气泡半径有关。在动力学控制阶段,反应速率与气泡的半径成0阶关系;在扩散控制阶段,反应速率与气泡的半径成-1阶关系。     

Effect of ultrasonic irradiation on the properties and performance of biodiesel produced from date seed oil used in the diesel engine

In the present study, the effect of ultrasound irradiation on the transesterification parameters, biodiesel properties, and its combustion profiles in the diesel engine was investigated. Moreover, date seed oil (DSO) was firstly utilized in the ultrasound-assisted transesterification reaction. DSO was extracted from Zahidi type date (Phoenix dactylifera) and was esterified to reduce its Free Fatty Acid (FFA) content. Biodiesel yield was optimized in both heating methods, so that the yield of 96.4% (containing 93.5% ester) at 60 °C, with 6 M ratio of methanol/oil, 1 wt% of catalyst (NaOH) and at 90 min of reaction time was reported. The ultrasound irradiation did not influence the reaction conditions except reaction time, reduced to 5 min (96.9% yield and 91.9% ester). The ultrasonic irradiation also influenced on the physicochemical properties of DSO biodiesel and improved its combustion in the diesel engine. The analysis results related to the engine and gas emission confirmed that the ultrasound-assisted produced biodiesel has lower density and viscosity, and higher oxygen content facilitating injection of fuel in the engine chamber and its combustion, respectively. Although, B40 (biodiesel blend consisting of 40% biodiesel and 60% net diesel fuel) as a blend of both fuels presented higher CO₂ and lower CO and HC in the emissions, the DSO biodiesel produced by ultrasound irradiation presented better specifications (caused about 2-fold improvement in emissions than that of conventional method). The findings of the study confirmed the positive effect of the ultrasound irradiation on the properties of the produced biodiesel along with its combustion properties in the diesel engine, consequently reducing air pollution problems.     

Effect of reaction temperature on the size and morphology of scorodite synthesized using ultrasound irradiation

Synthesis of scorodite (FeAsO₄·2H₂O) using dynamic action agglomeration and the oxidation effect from ultrasound irradiation was investigated. The effect of different reaction temperatures (90, 70, 50, and 30 °C) on the size and morphology of scorodite particles synthesized under O₂ gas flow and ultrasound irradiation was explored because the generation of fine bubbles depends on the solution temperature. At 90 °C, the size of scorodite particles was non-homogeneous (from fine particles (<1 μm) to large particles (>10 μm)). The oxidation–reduction potential (ORP) and yield at 90 °C showed lower values than those at 70 °C. The scorodite particles, including fine and non-homogeneous particles, were generated by a decrease in the oxidation of Fe(II) to Fe(III) and promotion of dissolution caused by the generation of radicals and jet flow from ultrasound irradiation. Using ultrasound irradiation in the synthesis of scorodite at low temperature (30 °C) resulted in the appearance of scorodite peaks in the X-ray diffraction (XRD) pattern after a reaction time of 3 h. The peaks became more intense with a reaction temperature of 50 °C and crystalline scorodite was obtained. Therefore, ultrasound irradiation can enable the synthesis of scorodite at 30 °C as well as the synthesis of large particles (>10 μm) at higher temperature. Oxide radicals and jet flow generated by ultrasound irradiation contributed significantly to the synthesis and crystal growth of scorodite.     

Destabilization of ultrafine bubbles in water using indirect ultrasonic irradiation

Ultrafine bubble (UFB) is a bubble with a diameter of less than 1 μm. Little attention has been paid to the defoaming and removal of UFBs. This study proposes a method to destabilize UFBs by using indirect ultrasonic irradiation. Besides, the destabilization mechanism of UFB was investigated. The ultrasonic frequency was 1.6 MHz and the dissipated power was 30 W. UFB dispersions were prepared using two different types of bubble generators: pressurized dissolution method and swirling liquid flow method. The effects of ultrasonic irradiation on the stability of UFBs were evaluated by particle tracking analysis (PTA) and electrophoretic zeta potential measurement. Results showed that the indirect ultrasonic irradiation for 30 min reduced the number concentration of UFBs by 90% regardless of the generation method. This destabilization was attributed to a decrease in the magnitude of zeta potential of UFBs due to the changes in pH and electrical conductivity. These changes in the electrochemical properties were caused by the formation of nitric acid. To study the destabilization mechanism, the pH of the UFB dispersions were modified by titration; the chemical and mechanical effects of ultrasound were separately examined. It was found that not only the chemical effect caused by the formation of nitric acid but also the mechanical effect contributed to the destabilization of UFB. Feasibility studies were also performed for UFBs in an aqueous surfactant solution and UFBs in a solid particle dispersion. The proposed method selectively destabilized UFBs in the solutions.     

Hydrodynamic behavior of bubbles at gas-evolving electrode in ultrasonic field during water electrolysis

In electrochemical processes, gas bubbles on the electrode can cause an increase in both overpotential and ohmic voltage drop which leads to higher energy consumption. Applying power ultrasound during water electrolysis can help to reduce the overpotential, enhance mass transfer, and save energy. In this study, we investigated the effect of ultrasound (20 kHz) on the hydrogen evolution reaction (HER) on a stainless steel plate with varying concentrations of NaOH solutions at 298 K, using linear sweep voltammetry (LSV). We especially focused on understanding the bubble behavior on the stainless steel plate during HER using high-speed imaging in ultrasonic field. When ultrasound was applied to solutions with NaOH concentrations of 0.1, 0.5, 1 M, the current density increased by about 9.0, 5.9, 2.8 %, respectively. As the ultrasound irradiation began, the bubbles tended to hover around on the electrode surface, coalescing with other bubbles, rather than rising. When the size of the coalesced bubbles became too large to stay on the surface of the electrode, they were expelled from the ultrasonic field. The repeated collapse and coalescence of these bubbles was observed while they were rising. The velocity increased about 2 times when ultrasound irradiation began, and increased by more than 6 times in the ultrasonic field. More nucleation of bubbles was observed on the electrode in the ultrasonic field. Using ultrasound reduced the critical diameter of bubbles which detached from the electrode, from 58.0 to 15.9 μm, and the residence time of the bubbles, from 533 to 118 ms. Further, when the ultrasound was applied, the mean diameter of bubbles decreased from 71.8 to 17 μm. Hence, bubble coverage on the electrode surface decreased from 8.3 to 1 % despite an increase in the total number of bubbles. As a result, ultrasound was found to be effective for hydrogen production during water electrolysis, increasing current by the faster removal of gas from the stainless steel plate.     

Ultrasound-mediated radical cascade reactions: Fast synthesis of functionalized indolines from 2-(((N-aryl)amino)methyl)acrylates

Novel functionalized indolines were synthesized from 2-(((N-aryl)amino)methyl)acrylates and formamides under ultrasonic irradiation for the first time. Aiming to develop a straightforward and easy-to-implement methodology for the synthesis of indolines, an instrumentation setup was designed, including ultrasound (US) equipment (Ultrasonic Horn; tip diameter of 12.7 mm, 20 kHz, maximum power of 400 W), an open reaction flask, and an inexpensive and green catalyst (1 mol%; FeSO₄·7H₂O; CAS: 7782–63–0) without the need for anhydrous conditions. The use of the sono-Fenton process in the presence of formamides and 2-(((N-aryl)amino)methyl)acrylates afforded a broad range of functionalized indolines within 60 s in high yields. Several experimental parameters of the ultrasound-assisted reaction were evaluated, such as amplitude (40–80%), sonication time (15–60 s), and pulsed ultrasonic irradiation. A 60 s silent reaction did not produce the desired indoline. The optimized conditions for US-mediated reactions allowed the production of functionalized indolines in high isolated yields (up to 99%, 60 s reaction, pulse ration 1 s:1 s, US amplitude 60 %).     

Bubble size distribution in acoustic droplet vaporization via dissolution using an ultrasound wide-beam method

Performance and efficiency of numerous cavitation enhanced applications in a wide range of areas depend on the cavitation bubble size distribution. Therefore, cavitation bubble size estimation would be beneficial for biological and industrial applications that rely on cavitation. In this study, an acoustic method using a wide beam with low pressure is proposed to acquire the time intensity curve of the dissolution process for the cavitation bubble population and then determine the bubble size distribution. Dissolution of the cavitation bubbles in saline and in phase-shift nanodroplet emulsion diluted with undegassed or degassed saline was obtained to quantify the effects of pulse duration (PD) and acoustic power (AP) or peak negative pressure (PNP) of focused ultrasound on the size distribution of induced cavitation bubbles. It was found that an increase of PD will induce large bubbles while AP had only a little effect on the mean bubble size in saline. It was also recognized that longer PD and higher PNP increases the proportions of large and small bubbles, respectively, in suspensions of phase-shift nanodroplet emulsions. Moreover, degassing of the suspension tended to bring about smaller mean bubble size than the undegassed suspension. In addition, condensation of cavitation bubble produced in diluted suspension of phase-shift nanodroplet emulsion was involved in the calculation to discuss the effect of bubble condensation in the bubble size estimation in acoustic droplet vaporization. It was shown that calculation without considering the condensation might underestimate the mean bubble size and the calculation with considering the condensation might have more influence over the size distribution of small bubbles, but less effect on that of large bubbles. Without or with considering bubble condensation, the accessible minimum bubble radius was 0.4 or 1.7 μm and the step size was 0.3 μm. This acoustic technique provides an approach to estimate the size distribution of cavitation bubble population in opaque media and might be a promising tool for applications where it is desirable to tune the ultrasound parameters to control the size distribution of cavitation bubbles.     

Ultrasound-assisted extraction of Na and K from swine feed and its application in a digestibility assay: A green analytical procedure

The study is aimed to evaluate the efficiency of ultrasound-assisted extraction (UAE) as a simple strategy focused on sample preparation for metal determination in biological samples. The extraction of sodium and potassium extraction was carried out from swine feed followed by determination of the concentration of these metals by flame atomic emission spectrometry (FAES). The experiment was performed to cover the study of the variables influencing the extraction process and its optimal conditions (sample mass, particle size, acid concentration, sonication time and ultrasound power); the determination of these analytical characteristics and method validation using certified reference material; and the analysis of pre-starter diets. The optimal conditions established conditions were as follows: mass: 100 mg, particle size:<60 μm, acid concentration: 0.10 mol L^?1 HCl, sonication time: 50 s and ultrasound power: 102 W. The proposed method (UAE) was applied in digestibility assays of those nutrients present in different piglet pre-starter feeds and their results proved to be compatible with those obtained from mineralized samples (P < 0.05). The ultrasound extraction method was demonstrated to be an excellent alternative for handless sampling and operational costs and the method also has the advantage of does not generating toxic residues that may negatively affect human health and contaminate the environment.     

Ultrasound assisted enzyme catalyzed hydrolysis of waste cooking oil under solvent free condition

The present work demonstrates the hydrolysis of waste cooking oil (WCO) under solvent free condition using commercial available immobilized lipase (Novozyme 435) under the influence of ultrasound irradiation. The process parameters were optimized using a sequence of experimental protocol to evaluate the effects of temperature, molar ratios of substrates, enzyme loading, duty cycle and ultrasound intensity. It has been observed that ultrasound-assisted lipase-catalyzed hydrolysis of WCO would be a promising alternative for conventional methods. A maximum conversion of 75.19% was obtained at mild operating parameters: molar ratio of oil to water (buffer pH 7) 3:1, catalyst loading of 1.25% (w/w), lower ultrasound power 100 W (ultrasound intensity – 7356.68 W m⁻²), duty cycle 50% and temperature (50 °C) in a relatively short reaction time (2 h). The activation energy and thermodynamic study shows that the hydrolysis reaction is more feasible when ultrasound is combined with mechanical agitation as compared with the ultrasound alone and simple conventional stirring technique. Application of ultrasound considerably reduced the reaction time as compared to conventional reaction. The successive use of the catalyst for repetitive cycles under the optimum experimental conditions resulted in a loss of enzymatic activity and also minimized the product conversion.     

Ultrasound-assisted alkaline proteinase extraction enhances the yield of pecan protein and modifies its functional properties

To enhance the extraction yield of pecan protein and modify its functional properties, this study investigated whether both ultrasound and enzyme have a synergistic impact on the extraction of pecan (Carya illinoinensis (Wangenh.) K. Koch) protein. The highest protein extraction rate (25.51%) was obtained under the conditions of 1415.43 W^.cm⁻², 15 min, pH 10.0, 50 °C, and 1% (w/w) alkaline proteinase. Owing to its high shear, mechanical energy and cavitation, the ultrasound process increased the solubility of the substrate making it readily accessible to the enzyme, thereby accelerating the chemical reaction and improving the yield of the protein. The optimized ultrasound-assisted enzymatic method (400 W, 20 kHz, 5 s/3s) effectively changed the secondary and tertiary structure of the pecan protein. The results of surface hydrophobicity, intrinsic fluorescence spectra, sulfhydryl content and scanning electron microscopy all indicated the unfolding of protein and exposure of hydrophobic groups and sulfhydryl groups. Moreover, the protein obtained by this method showed higher solubility (70.77%), higher emulsifying activity (120.56 m²/g), smaller particle size (326.7 nm), and better dispersion (0.305) than single ultrasound and non-ultrasound methods (p < 0.05). To conclude, ultrasound-assisted enzymatic method could be an appropriate technique to improve the yield and quality of the pecan protein. The study also provides a theoretical basis for the application of pecan protein in food processing.     

Comparative material study and synthesis of 4-(4-nitrophenyl)oxazol-2-amine via sonochemical and thermal method

The present paper deals with the synthesis of aminooxazole derivatives via thermal and ultrasonic methods using deep eutectic solvent as medium. It was observed that ultrasound-assisted method gave 90% yield in just 8 min as against 3.5 h required to get 69% yield by thermal method. One of the compounds 4-(4-nitrophenyl)-1,3-oxazol-2-amine synthesized by both methods were subjected to material characterization study via XRD, TGA and SEM analysis. It was observed that use of ultrasound not only increased the rate of reaction but also improved the quality of product obtained. The crystallinity of the product from ultrasound method was 21.12% whereas thermal method fetched only 8.33% crystallinity thereby improving crystallinity by almost 60%. In addition, sonochemical synthesis also saved more than 70% energy as depicted by energy calculations.     

Particle removal by a single cavitation bubble

In the paper,the behavior of the particle acted by the oscillating bubble is studied using a high-speed video camera.The bubble is generated using a very low voltage of 55 V.Images are captured at a speed of 15000 fps(frames per second).It is found that the velocity of the particle is dependent on the liquid viscosity,particle size,and tube diameter.Particle velocity decreases with the increase of the glycron-water mixture viscosity.A model is presented to predict the velocity and verified by experimental results.These observations may be beneficial for the application in medical treatment.