Aptamer-based biosensor for label-free detection of ethanolamine by electrochemical impedance spectroscopy

A label-free sensing assay for ethanolamine (EA) detection based on G-quadruplex-EA binding interaction is presented by using G-rich aptamer DNA (Ap-DNA) and electrochemical impedance spectroscopy (EIS). The presence of K⁺ induces the Ap-DNA to form a K⁺-stabilized G-quadruplex structure which provides binding sites for EA. The sensing mechanism was further confirmed by circular dichroism (CD) spectroscopy and EIS measurement. As a result, the charge transfer resistance (R_CT) is strongly increased as demonstrated by using the ferro/ferricyanide ([Fe(CN)₆]^3−/4−) as a redox probe. Under the optimized conditions, a linear relationship between ΔR_CT and EA concentration was obtained over the range of 0.16 nM and 16 nM EA, with a detection limit of 0.08 nM. Interference by other selected chemicals with similar structure was negligible. Analytical results of EA spiked into tap water and serum by the sensor suggested the assay could be successfully applied to real sample analysis. With the advantages of high sensitivity, selectivity and simple sensor construction, this method is potentially suitable for the on-site monitoring of EA contamination.     

Oligonucleotides-based biosensors with high sensitivity and selectivity for mercury using electrochemical impedance spectroscopy

A novel electrochemical biosensor with high sensitivity and selectivity for mercuric ion detection, based on DNA self-assembly electrode, is designed. Thiol functionalized poly-T oligonucleotides were used as gold electrode modifier through formation of Au–S bond between DNA and gold electrode. In presence of Hg²⁺ ions, the specific coordination between Hg²⁺ and thymine bases can change parallel ss-DNA from linear to hairpin structures, which can cause the release of partial DNA molecules from the surface of the electrode. The density of DNA on the surface of electrode correlated with the concentration of mercury in the solution and can be monitored by electrochemical impedance spectroscopy. The limit of detection of this method is pM level of mercuric ions which is far below the upper limit of Hg²⁺ mandated by United States Environmental Protection Agency (EPA), 2 ppb (10 nM). In addition, this method showed excellent selectivity. A series of divalent metal ions, including Ni²⁺, Co²⁺, Mg²⁺, Zn²⁺, Ba²⁺ and Cd²⁺, have little interference with the detection of Hg²⁺.     

Development of an enrofloxacin immunosensor based on label-free electrochemical impedance spectroscopy

Enrofloxacin is the most widespread antibiotic in the fluoroquinolone family. As such, the development of a rapid and sensitive method for the determination of trace amounts of enrofloxacin is an important issue in the health field. The interaction of the enrofloxacin antigen to a specific antibody (Ab) immobilized on an 11-mercapto-undecanoic acid-coated gold electrode was quantified by electrochemical impedance spectroscopy. Two equivalent circuits were separately used to interpret the obtained impedance spectra. These circuits included one resistor in series with one parallel circuit comprised of a resistor and a capacitor (1R//C), and one resistor in series with two parallel RC circuits (2R//C). The results indicate that the antigen-antibody reaction analyzed using the 1R//C circuit provided a more sensitive resistance increment against the enrofloxacin concentration than that of the 2R//C circuit. However, the 2R//C circuit provided a better fitting for impedance spectra, and therefore supplies more detailed results of the enrofloxacin-antibody interaction, causing the increase of electron transfer resistance selectively to the modified layer, and not the electrical double layer. The antibody-modified electrode allowed for analysis of the dynamic linear range of 1-1000 ng/ml enrofloxacin with a detection limit of 1 ng/ml. The reagentless and label-free impedimetric immunosensors provide a simple and sensitive detection method for the specific determination of enrofloxacin.     

Technology of electrochemical impedance spectroscopy for an energy-sustainable society

Electrochemical impedance spectroscopy has been widely used to understand the chemistry and physics of battery systems. This review covers electrochemical impedance spectroscopy used for the interpretation of impedance data of lithium-ion batteries (LIBs) from advanced equivalent circuit models to the mathematical model, which is developed by John Newman. In addition, as a method to realize an energy-sustainable society using diagnostics based on the combination of LIBs and electrochemical impedance spectroscopy, on-board diagnostics of battery packs are achieved based on an input signal generated by a power controller in a battery management system instead of the conventionally used frequency response analyzer. The diagnostic system is applicable to energy management systems which are installed in homes, buildings, and communities, accumulating the impedance data on state of health of LIBs. Finally, a future possibility regarding the diagnostics of battery packs coupled with the machine learning of impedance data is introduced.     

Study of the electrochemical behaviour of a carbon steel electrode in sodium sulfate aqueous solutions using electrochemical impedance spectroscopy

The study of a plain carbon steel (AISI 1020) in Na₂SO₄ aqueous solutions at different concentrations was carried out by electrochemical impedance spectroscopy (EIS) in order to determine the corrosion mechanism and to obtain representative corrosion rates of the system. EIS was used to measure corrosion current densities at high concentrations in the range 0.1–1 wt% Na₂SO₄, but in the low concentration range, from 0.001 to 0.01 wt%, a scattered Nyquist plot was obtained. Other electrochemical techniques, such as polarization resistance (PR), Tafel plots and electrochemical noise (EN), were also used in this analysis. The charge transfer resistance was determined and compared with the PR and noise resistance. Electronic Publication     

Local electrochemical impedance spectroscopy: A window into heterogeneous interfaces

The ability to probe surface reactivity on a local scale has led to a new insight into the comprehension of the electrochemical reactivity in relation with the microstructure of the surface. Among the different techniques developed in recent years, local electrochemical impedance spectroscopy has the advantage of using a transient approach to locally characterize a stationary electrochemical system without the need to add any redox mediator in solution, which is a great advantage for the study of different systems.In this review, particular attention is paid to the different ways of measuring the local impedance, and the technique implementing a local current measurement in solution is deeply discussed. This local electrochemical impedance spectroscopy journey also encompasses a discussion about technical and experimental limitations.     

A monoclonal antibody-based immunosensor for detection of Sudan I using electrochemical impedance spectroscopy

Sudan I monoclonal antibodies (Mabs) were prepared by hybridoma technique and firstly used to develop a Sudan I immunosensor by immobilizing the Mabs on a gold electrode. o-Mercaptobenzoic acid (MBA) was covalently conjugated on the gold electrode to form a self-assembled monolayer (SAM). The immobilization of Sudan I Mabs to the SAM was carried out through a stable acyl amino ester intermediate generated by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydrosuccinimide (NHS), which could condense antibodies reproducibly and densely on the SAM. The changes of the electrode behavior after each assembly step were investigated by cyclic voltammetric (CV) technique. The Sudan I concentration was measured through the increase of impedance values in the corresponding specific binding of Sudan I and Sudan I antibody. A linear relationship between the increased electron-transfer resistance (Ret) and the logarithmic value of Sudan I concentrations was found in the range of 0.05-50 ng mL⁻¹ with the detection limit of 0.03 ng mL⁻¹. Using hot chili as a model sample, acceptable recovery of 96.5-107.3% was obtained. The results were validated by conventional HPLC method with good correlation. The proposed method was proven to be a feasible quantitative method for Sudan I analysis with the properties of stability, highly sensitivity and selectivity.     

Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy

Electroless Ni-P composite coatings have gained a good deal of popularity and acceptance in recent years as they provide considerable improvement of desirable qualities such as hardness, wear, abrasion resistance, etc. The disagreement among researchers on the corrosion behaviour of these coatings warrants a thorough investigation. Among the various techniques available for the determination of corrosion resistance, electrochemical impedance spectroscopy (EIS) is considered to be superior as it provides not only an assessment of the corrosion resistance of different deposits but also enables the mechanistic pathway by which the deposits become corroded to be determined. The present investigation focuses on the evaluation of the corrosion resistance of electroless Ni-P and Ni-P-Si₃N₄, Ni-P-CeO₂ and Ni-P-TiO₂ composite coatings produced using an acidic hypophosphite-reduced electroless nickel bath, using EIS. The study makes evident that the same fundamental reaction is occurring on all the coatings of the present study but over a different effective area in each case. The charge transfer resistance of electroless Ni-P and Ni-P composite deposits are in the range 32,253–90,700 Ω cm², whereas the capacitances of these coatings are in the range 11–17 μF/cm². The improved corrosion resistance obtained for electroless Ni-P and Ni-P composite coatings is due to the enrichment of phosphorus on the electrode surface, which enables the preferential hydrolysis of phosphorus over that of nickel. The better corrosion resistance obtained for electroless Ni-P composite coatings can be ascribed to the decrease in the effective metallic area prone to corrosion. Among the three electroless Ni-P composite coatings, the corrosion resistance is in the following order: Ni-P-CeO₂=Ni-P-Si₃N₄>Ni-P-TiO₂. Electronic Publication     

Use of electrochemical impedance spectroscopy to characterise the physical properties of ex situ reconstructed sea surface microlayer

The objective of this work was to develop electrochemical impedance spectroscopy (EIS) to characterise the physical properties of the sea surface microlayer ( ssm ). Samples from Lake Rogoznica in Croatia were extracted by n-hexane and dichloromethane (dcm) respectively and transferred to mercury electrodes. The EIS results were compared with those of a model phospholipid, dioleoyl phosphatidylcholine (DOPC) which forms near defect-free monolayers on a mercury surface. The ssm extracts formed inhomogeneous monolayers on the mercury surface and the dcm ssm extract monolayer showed greater surface roughness than the hexane ssm extract. The hexane ssm extract introduced defects and a greater surface roughness into mixed DOPC- ssm extract monolayers than the dcm ssm extract due to the lower compatibility of the non-polar hexane extract with the DOPC than that of the polar ssm extract. In addition, the dcm ssm component in the mixed DOPC- ssm monolayer showed an association with pyrene added to the solution.     

Analysis of large experimental datasets in electrochemical impedance spectroscopy

An approach for the analysis of large experimental datasets in electrochemical impedance spectroscopy (EIS) has been developed. The approach uses the idea of successive Bayesian estimation and splits the multidimensional EIS datasets into parts with reduced dimensionality. Afterwards, estimation of the parameters of the EIS-models is performed successively, from one part to another, using complex nonlinear least squares (CNLS) method. The results obtained on the previous step are used as a priori values (in the Bayesian form) for the analysis of the next part. To provide high stability of the sequential CNLS minimisation procedure, a new hybrid algorithm has been developed. This algorithm fits the datasets of reduced dimensionality to the selected EIS models, provides high stability of the fitting and allows semi-automatic data analysis on a reasonable timescale. The hybrid algorithm consists of two stages in which different zero-order optimisation strategies are used, reducing both the computational time and the probability to overlook the global optimum. The performance of the developed approach has been evaluated using (i) simulated large EIS dataset which represents a possible output of a scanning electrochemical impedance microscopy experiments, and (ii) experimental dataset, where EIS spectra were acquired as a function of the electrode potential and time. The developed data analysis strategy showed promise and can be further extended to other electroanalytical EIS applications which require multidimensional data analysis.     

Evaluating the performance of organic coatings under mechanical stress using electrochemical impedance spectroscopy

Stress in coatings originating from a mechanical load imposed during exploitation is a relatively unexplored field of investigation. Paradoxically, a number of constructions and installations seem to operate under such conditions. The purpose of this work was to investigate the impact of a cyclic mechanical load exerted on coating/metal systems. It was the authors aim to verify whether repeated mechanical stress constitutes a significant factor contributing to coating degradation. Epoxy coated St3SAl steel samples were subjected to 21,000 uniaxial strain/release cycles. The maximum force applied assured maintenance within the elastic deformation region of the metal substrate. The state of the protective film was monitored using electrochemical impedance spectroscopy. The coating response to the mechanical load occurred in a three-stage process. The system subjected to the strain/release cycles revealed signs of degradation earlier compared to a non-strained, reference sample.Contribution to the 3rd Baltic Conference on Electrochemistry GDASK-SOBIESZEWO, 23–26 April 2003.Dedicated to the memory of Harry B. Mark, Jr. (February 28, 1934–March 3rd, 2003)     

One saccharide sensor based on the complex of the boronic acid and the monosaccharide using electrochemical impedance spectroscopy

A novel saccharide sensor based on the covalent interaction between the boronic acid and saccharides was developed. Poly (aminophenylboronic acid) (PABA) was prepared by electropolymerizing 3-aminophenylboronic acid on gold electrode surface in acidic solution. The boronic acid group of the PABA film can form covalent-bond with different saccharides, which can change the dielectric characteristics of the PABA film, and the change of the dielectric characteristic was saccharides concentration dependent. Four kinds of saccharides could be detected by using electrochemical impedance spectroscopy. Good linear relationship and high sensitivity were obtained by this method.     

Electrochemical copolymerization of pyrrole and 2,2-bithiophene and semiconducting characterization of the resulting copolymer films by electrochemical impedance spectroscopy and photoelectrochemistry

The electrochemical copolymerization of pyrrole and bithiophene was studied at a polymerization potential of 1.1 V for various monomer ratios. The cyclic voltammograms showed that the electrochemical properties of the resulting copolymer films changed gradually from those of polypyrrole to polybithiophene with an increase in concentration of bithiophene in the initial electrolyte. The evidence for copolymer formation is based on the analytical results of electrospray ionization mass spectroscopy, thermoanalysis, and Raman spectroscopy. The results showed that cooligomers and homooligomers were found in the electrolyte after copolymerization. The difference between the morphology of a copolymer of pyrrole and bithiophene and a polymer mixture of polypyrrole and polythiophene was demonstrated by scanning electron microscopy. Electrochemical impedance and photocurrent measurements were carried out in order to achieve information on the semiconducting properties of the homopolymers and copolymers obtained. A model of a very thin layer of polypyrrole formed immediately on the electrode surface covered by a thicker copolymer film was developed to explain the results.Dedicated to Zbigniew Galus on the occasion of his 70^th birthday.     

Electrochemical impedance spectroscopy of diluted solutions of Bisphenol A

The electrochemical oxidation of bisphenol A was carried out using platinum, glassy carbon, titanium dioxide and polypyrrole modified working electrodes. Acetonitrile and water were evaluated as solvents; however, passivation could not be avoided due to the formation of insoluble oxidation products that adhere to the surface. The use of ultrasound did not show any improvement either. Finally, by using electrochemical impedance spectroscopy measurements at the open circuit potential it was possible to obtain a steady response of one of the components of the equivalent circuit proposed. This response is only dependent on the concentration of bisphenol A. At the same time it was demonstrated that the adsorption is a fundamental process that occurs more easily in water than in acetonitrile, this fact is reflected in the impedance spectra.     

Influence of electrolyte characteristics on the electrochemical parameters of electrical double layer capacitors

Electrical double layer capacitors based on ideally polarizable nanoporous carbon electrodes in propylene carbonate with the addition of different 1 M Me₃EtNBF₄, Me₂Et₂NBF₄, MeEt₃NBF₄, Et₄NBF₄, Et₃PrNBF₄ and Et₃BuNBF₄ electrolytes have been tested by cyclic voltammetry, chronoamperometry and electrochemical impedance methods. The limits of ideal polarizability, low-frequency limiting capacitance and series resistance, time constant, Ragone plots (energy density vs. power density dependencies) and other characteristics have been discussed. The influence of the electrolyte molar mass on the electrochemical characteristics of the nanoporous carbon electrode cells has been established. The applicability limits of the Srinivasan and Weidner model have been tested.     

Hexachloroiridate(IV) as a redox probe for the electrochemical discrimination of B-DNA and M-DNA monolayers on gold

This paper demonstrates the effectiveness of using the redox couple to investigate DNA monolayers, and compares the potential advantages of this system to the standard redox couple. B-DNA monolayers were converted to M-DNA by incubation in buffer containing 0.4 mM Zn²⁺ at pH 8.6 and studied by cyclic voltammetry (CV), impedance spectroscopy (IS) and chronoamperometry (CA) with . Compared to B-DNA, M-DNA showed significant changes in CV, IS and CA spectra. However, only small changes were observed when the monolayers were incubated in Mg²⁺ at pH 8.6 or in Zn²⁺ at pH 6.0. The heterorgeneous electron-transfer rate (k_ET) between the redox probe and the surface of a bare gold electrode was determined to be 5.7 × 10⁻³ cm/s. For a B-DNA modified electrode, the k_ET through the monolayer was too slow to be measured. However, under M-DNA conditions, a k_ET of 1.5 × 10⁻³ cm/s was reached. As well, the percent change in resistance to charge transfer, measured by IS, was used to illustrate the dependence of M-DNA formation on pH. This result is consistent with Zn²⁺ ions replacing the imino protons on thymine and guanine residues. The redox couple was also effective in differentiating between single-stranded and double-stranded DNA during de-hybridization and rehybridization experiments.     

Physical adsorption of protamine for heparin assay using a quartz crystal microbalance and electrochemical impedance spectroscopy

This study attempted to determine absolute heparin concentration in phosphate buffer solution (PBS, pH 7.4) by using quartz crystal microbalance (QCM) as an affinity biosensor. Electrochemical impedance spectroscopy (EIS) was also used to investigate immobilization of protamine and heparin assay. In addition, the effectiveness of physical adsorption in immobilizing protamine was confirmed by examining the preparation conditions, including the incubation time and protamine concentration. It induced maximum decrease (ca. −100 Hz) in oscillating frequency of QCM by applying 20 mg/ml protamine and 20 min for incubation in PBS. Heparin adsorption onto protamine-modified electrode in PBS revealed an exponential-like binding curve and long duration for reaching the steady state in frequency response of QCM. Moreover, two linear calibration curves were obtained judging from the initial slope (df/dt) and the frequency change (Δf) of QCM obtained after a binding interval (600 s) for heparin concentrations from 0 to 3.0 and 7.0 U/ml, respectively. In EIS analysis, calibration curves with linear concentration range of 0-3.0 U/ml were obtained for heparin in PBS when ferrocyanide was used as an electroactive marker.     

Electrochemical impedance spectroscopy detection of lysozyme based on electrodeposited gold nanoparticles

A simple, highly sensitive, and label-free electrochemical impedance spectroscopy (EIS) aptasensor based on an anti-lysozyme-aptamer as a molecular recognition element, was developed for the detection of lysozyme. Improvement in sensitivity was achieved by utilizing gold nanoparticles (AuNPs), which were electrodeposited onto the surface of a gold electrode, as a platform for immobilization of the aptamer. To quantify the amount of lysozyme, changes in the interfacial electron transfer resistance (R_et) of the aptasensor were monitored using the redox couple of an [Fe(CN)₆]^3−/4− probe. The R_et increased with lysozyme concentration. The plot of R_et against the logarithm of lysozyme concentration is linear over the range from 0.1 pM to 500 pM with a detection limit of 0.01 pM. The aptasensor also showed good selectivity for lysozyme without being affected by the presence of other proteins.     

Dynamic electrochemical impedance spectroscopy measurements of passive layer cracking under static tensile stresses

Electrochemical impedance spectroscopy allows the examination of corrosion susceptibility and resistance for different construction materials, in particular the determination of the properties of their passive films. This technique makes possible the analysis of electrochemical processes in time domain, including rapid phenomena such as changes in the properties of passive films, but it has never been used for passive layer cracking examination. In many cases, fracture of the passive film under tensile stresses leads to stress corrosion cracking. Therefore, investigations of passive layer cracking on austenitic stainless steels under tensile stresses facilitate the understanding of the mechanism of stress corrosion cracking in these common engineering materials. The effect of static tensile stresses on the passive film cracking behaviour of type 304L stainless steel immersed in 0.5 M NaCl solution at room temperature has been investigated. This paper presents the impedance spectra obtained for 304L stainless steel samples at different potential values.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Label-free detection of DNA molecules on the dendron based self-assembled monolayer by electrochemical impedance spectroscopy

We report preparation of a novel platform for effective DNA hybridization and its application to the detection of single mismatched DNA. Cone-shaped dendrimer molecules have been immobilized on the gold surface at equidistance, 3.1 nm, from each other with a probe DNA molecule attached to the top of each dendrimer so that enough space would be secured for effective hybridization. This arrangement allows each probe DNA molecule to form a natural DNA double helix upon hybridization with a target DNA molecule. The single nucleotide polymorphism at either the central or end position of the 25-mer target DNA has been shown to be effectively discriminated against on this platform from each other as well as from a complementary DNA by electrochemical impedance measurements. We also report adverse effects exerted by probe ions, Fe(CN)₆^3−/4−, on DNA hybridization reactions. The significance of the results for the use in DNA analysis is discussed.