Sustainable emerging sonication processing: Impact on fungicide reduction and the overall quality characteristics of tomato juice

Sonication is an emerging sustainable and eco-friendly technology that has been broadly explored in food processing and preservation. Sonication has the edges of low energy consumption and high efficiency than conventional decontamination methods and would not pass on secondary pollutants. In the current research, we analyzed the impact of sonication on anilazine fungicide reduction, bioactive compound, antioxidant activity, colloidal stability, and enzymatic and microbial load of tomato juice. Sonicated treatments were carried out at 40 kHz, 480 W, 30 ± 2 °C for 0, 8, 16, 24, 32, and 40 min in an ultrasonic bath cleaner. The GC–MS outcomes revealed that the anilazine maximum reduction in tomato juice attained 80.52 % at 40 min of sonication. The anilazine concentration reduced significantly (p ≤ 0.05) with increased sonication time. In contrast, sonication treatments have acquired the highest TFC, TPC, ascorbic acid, carotenoids, lycopene, ABTS, and ORAC assay than the untreated sample. The Sonication process significantly improved (p ≤ 0.05) colloidal stability by reducing particle size distribution, apparent viscosity, and sedimentation index. Sonication prolonged tomato juice's shelf life by reducing the total viable count from 6.31 to 1.91 log CFU/mL. Polygalacturonase and pectin methyl esterase of the sonication sample at 40 min were inactivated by 44.32 % and 64.2 %, respectively. Considering this issue from a future perspective, sonication processing can be used industrially to enhance fruit juice's nutritional properties and shelf life and reduce pesticides and other organic residues.     

Effects of thermal treatment and sonication on quality attributes of Chokanan mango (Mangifera indica L.) juice

Ultrasonic treatment is an emerging food processing technology that has growing interest among health-conscious consumers. Freshly squeezed Chokanan mango juice was thermally treated (at 90 °C for 30 and 60 s) and sonicated (for 15, 30 and 60 min at 25 °C, 40 kHz frequency, 130 W) to compare the effect on microbial inactivation, physicochemical properties, antioxidant activities and other quality parameters. After sonication and thermal treatment, no significant changes occurred in pH, total soluble solids and titratable acidity. Sonication for 15 and 30 min showed significant improvement in selected quality parameters except color and ascorbic acid content, when compared to freshly squeezed juice (control). A significant increase in extractability of carotenoids (4–9%) and polyphenols (30–35%) was observed for juice subjected to ultrasonic treatment for 15 and 30 min, when compared to the control. In addition, enhancement of radical scavenging activity and reducing power was observed in all sonicated juice samples regardless of treatment time. Thermal and ultrasonic treatment exhibited significant reduction in microbial count of the juice. The results obtained support the use of sonication to improve the quality of Chokanan mango juice along with safety standard as an alternative to thermal treatment.     

Study the impact of ultra-sonication and pulsed electric field on the quality of wheat plantlet juice through FTIR and SERS

Pulsed electric field (PEF) and Ultrasound (US) are commonly used in food processing. We investigated the combined impact of pulsed electric field (PEF) and ultrasound (US) on the wheat plantlet juice. When compared with the individual treatments, the highest values of total phenolics, total flavonoids, chlorophyll, ORAC assay, and DPPH activities were obtained using the combined (US + PEF) methods. The US + PEF significantly decreased the peroxidase and polyphenol oxidase activities from 0.87 to 0.27 Abs min⁻¹ and 0.031–0.016 Abs min⁻¹. Also, the synergistic application significantly lowered the yeast and mold (3.92 to 2.11 log CFU/mL), E. coli/Coliform (1.95 to 0.96 log CFU/mL), and aerobics (4.41 to 2.01 log CFU/mL). Furthermore, Fourier Transform Infrared (FT-IR) and surface-enhanced Raman spectroscopy (SERS) was used to analyzing juice quality. Gold nanoparticles (AuNPs) were used as the SERS substrates, which provided stronger Raman peaks for the samples treated with US + PEF methods. The FT-IR analysis showed significant enhancement of the nutritional molecules. The enhanced quality of wheat plantlet juice combined with lower yeast and mold suggests the suitability of integrated methods for further research and applications.     

Combined effect of blanching and sonication on quality parameters of bottle gourd (Lagenaria siceraria) juice

This study evaluated the combined effect of blanching and sonication treatment on selected quality parameters of bottle gourd juice (BGJ). Bottle gourd cubes were blanched and juice was extracted. Effect of frequency (20–50 kHz), amplitude (50–90%) and time (10–30 min) was also studied on quality parameters like titratable acidity (TA), pH, total soluble solids (TSS), physical stability (PS), ascorbic acid (AA), total phenolics (TP), total carotenoids (TC), browning index (BI), total plate count (TPC) and yeast & mold count (Y&M) of BGJ to derive the level of these parameters. Combined effect of blanching followed by sonication (BFS) showed significant (P ⩽ 0.05) change in all quality parameters except TA. Highest percentage of TSS (5.9 °B), PS (2%), AA (18.99 mg/100 g), TP (1010 mg/100 g) and TC (5.8 mg/100 g) was observed at 70% amplitude, 50 kHz frequency and 20 min. Results suggested 70% amplitude, 50 kHz frequency and 20 min as best treatment conditions for processing of BGJ. Microstructure examination, transmission electron microscopy (TEM) and laser diffraction analysis of BGJ showed significant change in particle size and distribution. Moreover, TEM of blanched and sonicated samples of BGJ also showed significant (P ⩽ 0.05) change in microbial profile.     

Effect of ultrasound,heating and enzymatic pre-treatment on bioactive compounds in juice from Berberis amurensis Rupr.

The aim of the study was to assess the influence of ultrasound (frequency 20 kHz, amplitude 70%, power 140 W for 10 min), heating (80 °C, 5 min) and enzymatic pre-treatment of mash (50 °C, Rohapect 10L at a dose of 0.23 g/1000 g, maceration time 60 min) on the yield, the content of phenolic compounds (including anthocyanins), ascorbic acid, and the antioxidative capacity of Berberis amurensis juice. Additionally, the polyphenols profile of this raw material and juices was identified. 25 phenolic compounds were identified in the fruit and 24 in juices. The content of phenolics in the fruit was 636 mg/100 g. Chlorogenic acid, 4-hydroxybenzoate and quercetin-3-O-glicoside were predominant. The content of anthocyanins in the fruit was 217 mg/100 g f.w., where peonidin-3-O-glucoside (98%) was predominant. The content of ascorbic acid amounted to 16.60 mg/100 g. The yield of the barberry juice pressing process ranged from 56% to 60% – there were no differences between the mash treatment methods. The enzymatic and thermal treatment of the mash resulted in the highest content of phenolic compounds in the juice. The sonication resulted in the highest content of anthocyanins, including peonidin-3-O-glucoside, as the main anthocyanin. The thermal treatment of the mash resulted in a lower loss of ascorbic acid than the other methods. The juice from the mash subjected to pectinolysis or heat treatment exhibited the highest antioxidative capacity.     

High-intensity ultrasonication impact on the chlorothalonil fungicide and its reduction pathway in spinach juice

Among different novel technologies, sonochemistry is a sustainable emerging technology for food processing, preservation, and pesticide removal. The study aimed to probe the impact of high-intensity ultrasonication on chlorothalonil fungicide degradation, reduction pathway, and bioactive availability of spinach juice. The chlorothalonil fungicide-immersed spinach juice was treated with sonication at 360 W, 480 W, and 600 W, 40 kHz, for 30 and 40 min at 30 ± 1 °C. The highest reduction of chlorothalonil fungicide residues was observed at 40 min sonication at 600 W. HPLC-MS (high-performance liquid chromatography-mass spectroscopy) analysis revealed the degradation pathway of chlorothalonil and the formation of m-phthalonitrile, 3-cyno-2,4,5,6-tetrachlorobenamide, 4-dichloroisophthalonitrile, trichloroisophtalonitrile, 4-hydoxychlorothalonil, and 2,3,4,6-tetrachlorochlorobenzonitrile as degradation products. High-intensity sonication treatments also significantly increased the bioavailability of phenolic, chlorophyll, and anthocyanins and the antioxidant activity of spinach juice. Our results proposed that sonication technology has excellent potential in degrading pesticides through free radical reactions formation and pyrolysis. Considering future perspectives, ultrasonication could be employed industrially to reduce pesticide residues from agricultural products and enhance the quality of spinach juice.     

Effect of sonication conditions: Solvent,time, temperature and reactor type on the preparation of micron sized vermiculite particles

The effects of temperature, time, solvent and sonication conditions under air and Argon are described for the preparation of micron and sub-micron sized vermiculite particles in a double-jacketed Rosett-type or cylindrical reactor. The resulting materials were characterized via X-ray powder diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Fourier Transform Infrared (FTIR) Spectroscopy, BET surface area analysis, chemical analysis (elemental analysis), Thermogravimetry analysis (TGA) and Laser Granulometry. The sonicated vermiculites displayed modified particle morphologies and reduced sizes (observed by scanning electron microscopy and laser granulometry). Under the conditions used in this work, sub-micron sized particles were obtained after 5 h of sonication, whereas longer times promoted aggregation again. Laser granulometry data revealed also that the smallest particles were obtained at high temperature while it is generally accepted that the mechanical effects of ultrasound are optimum at low temperatures according to physical/chemical properties of the used solvent. X-ray diffraction results indicated a reduction of the crystallite size along the basal direction [0 0 1]; but structural changes were not observed. Sonication at different conditions also led to surface modifications of the vermiculite particles brought out by BET surface measurements and Infrared Spectroscopy. The results indicated clearly that the efficiency of ultrasound irradiation was significantly affected by different parameters such as temperature, solvent, type of gas and reactor type.     

Impacts of sonication and high hydrostatic pressure on the structural and physicochemical properties of quinoa protein isolate dispersions at acidic,neutral and alkaline pHs

Herein, 1 wt% quinoa protein isolate (QPI) was exposed to sonication using a 20 kHz ultrasonicator equipped with a 6 mm horn (14.4 W, 10 mL, up to 15 min) or high hydrostatic pressure (HHP, up to 600 MPa, 15 min) treatments at pH 5, pH 7, and pH 9. The changes to physicochemical properties were probed by SDS-PAGE, FTIR, free sulfhydryl group (SH), surface hydrophobicity (H₀), particle size and solubility. As revealed by SDS-PAGE, substantial amounts of 11S globulin participated in the formations of aggregates via SS bond under HHP, particularly at pH 7 and pH 9. However, protein profiles of QPI were not significantly affected by the sonication. Free SH groups and surface hydrophobicity were increased after the sonication treatment indicating protein unfolding and exposure of the embedded SH and/or hydrophobic groups. An opposite trend was observed in HHP treated samples, implying aggregation and reassociation of structures under HHP. HHP and sonication treatments induced a decrease in ordered secondary structures (random coil and β-turn) accompanied with an increase in disordered secondary structures (α-helix and β-sheet) as probed by FTIR. Finally, the sonication treatment induced a significant improvement in the solubility (up to ∼3 folds at pH 7 and ∼2.6 folds at pH 9) and a reduction in particle sizes (up to ∼3 folds at pH 7 and ∼4.4 folds at pH 9). However, HHP treatment (600 MPa) only slightly increased the solubility (∼1.6 folds at pH 7 and ∼1.2 folds at pH 9) and decreased the particle size (∼1.3 folds at pH 7 and ∼1.2 folds at pH 9). This study provides a direct comparison of the impacts of sonication and HHP treatment on QPI, which will enable to choose the appropriate processing methods to achieve tailored properties of QPI.     

Effect of combined ultrasonic and enzymatic extraction technique on the quality of noni (Morinda citrifolia L.) juice

In order to obtain noni juice with high yield and good quality, the effect of combined extraction technique of enzymatic treatment (EZ) and ultrasonication (US) on the overall quality of noni juice was investigated. Moreover, the extraction performance of the EZ-US combined extraction technique was compared with that of EZ-based extraction and the US-based extraction. Response surface methodology (RSM) was designed to optimize the parameters of ultrasonic treatment, by taking consideration of the extraction efficiency, quality parameters and bioactive ingredients of noni juice. The results indicated that combined ultrasonic and enzymatic treatment achieved a synergistic effect on promoting the quality of noni juice. The maximum juice yield of 67.95 % was obtained under ultrasonication for 10 min at 600 W after enzymatic treatment (EZU). In addition, EZU-treated juice exhibited the highest contents of total phenolic and flavonoid, which were 148.19 ± 2.53 mg gallic acid/100 mL and 47.19 ± 1.22 mg rutin/100 mL, respectively, thus contributing to better antioxidant activity. Moreover, the EZU treatment significantly reduced the particle size of noni juice, and improved its suspension stability and rheological properties. FTIR results indicated that the treatments did not bring major changes in the chemical structure and the functional groups of compounds in noni juice. Therefore, EZU treatment can be successfully applied to the extraction of noni juice with better nutritional properties and overall quality.     

A chemometric approach to evaluate the effects of probe-type ultrasonication on the enzyme inactivation and quality attributes of fresh amla juice

The enzymatic browning induced in amla juice due to the high activity of polyphenol oxidase (PPO) and peroxidase (POD) is one of the critical issues faced by the industry. The present study assessed the suitability of non-thermal, high-intensity ultrasound (US) on the inactivation of PPO and POD in fresh Indian Gooseberry juice. Ultrasonic waves, using a 6 mm titanium alloy probe were irradiated in the juice at a maximum power of 455 W and frequency of 20 kHz. The subsequent effects on biochemical attributes were studied using response surface methodology. Inactivation rates of 90.72 % and 73.18 %, respectively, for PPO and POD enzymes, were observed at the highest US intensity and exposure time. Numerical optimisation using the three-factor, three-level Box-Behnken design suggested that an optimum process at 70 % (energy density: 1610 Wcm⁻²) pulsed at 5 s on and 5 s off for 7 min 30 s resulted in PPO and POD inactivation of the order of 76.42 % and 64.57 % respectively. At these experimental conditions, the optimized levels of biochemical attributes i.e., ascorbic acid (738.50 mg/100 mL), total phenols (17.10 mg/mL), DPPH antioxidant activity (58.47 %), tannins (7.11 µg/mL), colour change (ΔE = 9.04) and flavonoids (6.14 mg/mL) were achieved. The overall statistical models were significant for all the responses except for reducing sugars. Furthermore, the approximation equations for individual responses indicated that the goodness of fit was adequate (R² > 0.90). The results suggested that ultrasound is a suitable processing technique for amla juice stabilisation compared to thermal treatments that result in the loss of quality.     

Effects of multi-frequency ultrasound on physicochemical properties,structural characteristics of gluten protein and the quality of noodle

In this study, the influence of multi-frequency ultrasound irradiation on the functional properties and structural characteristics of gluten, as well as the textural and cooking characteristics of the noodles were investigated. Results showed that the textural and cooking characteristics of noodles that contain less gluten pretreated by multi-frequency ultrasonic were ultrasonic frequency dependent. Moreover, the noodles that contain a smaller amount of sonicated gluten could achieve the textural and cooking quality of commercial noodles. There was no significant difference in the cooking and texture characteristics between commercial noodles and noodles with 12%, 11%, and 10% gluten pretreated by single-frequency (40 kHz), dual-frequency (28/40 kHz), and triple-frequency sonication (28/40/80 kHz), respectively. Furthermore, the cavitation efficiency of triple-frequency ultrasound was greater than that of dual-frequency and single-frequency. As the number of ultrasonic frequencies increased, the solubility, water holding capacity and oil holding capacity of gluten increased significantly (p < 0.05), and the particle size was reduced from 197.93 ± 5.28 nm to 110.15 ± 2.61 nm. Furthermore, compared to the control group (untreated), the UV absorption and fluorescence intensity of the gluten treated by multi-frequency ultrasonication increased. The surface hydrophobicity of gluten increased from 8159.1 ± 195.87 (untreated) to 11621.5 ± 379.72 (28/40/80 kHz). Raman spectroscopy showed that the α-helix content of all sonicated gluten protein samples decreased after sonication, while the β-sheet and β-turn content increased, and tryptophan and tyrosine residues were exposed. Through scanning electron microscope (SEM) analysis, the gluten protein network structure after ultrasonic treatment was loose, and the pore size of the gluten protein network increased from about 10 μm (untreated) to about 26 μm (28/40/80 kHz). This work elucidated the effect of ultrasonic frequency on the performance of gluten, indicating that with increasing frequency combination increases, the ultrasound effect became more pronounced and protein unfolding increased, thereby impacting the functional properties and the quality of the final product. This study provided a theoretical basis for the application of multi-frequency ultrasound technology in the modification of gluten protein and noodle processing.     

Storage effects on the quality quartet of orange juice submitted to moderate thermosonication: Predictive modeling and odor fingerprinting approach

The effects of moderate thermosonication (MTS) on the quality quartet: physico-chemical, microbial, nutritional and sensory qualities of orange juice (OJ) inoculated with Alicyclobacillus acidoterrestris (AAT) were studied during 24 days of storage at ambient and refrigerated temperatures. The bioactive compounds and antioxidant activity of OJ decreased with storage, while the pectin methyl esterase (PME) increased. Nonetheless, noticeable changes were observed from the 12th day of storage. There was no obvious (p > 0.05) variation in pH and total soluble solids. To determine the nutritional and microbial quality characteristics of OJ during storage, non-linear kinetic curves were successfully fitted with least square fitting polynomial and four-parameter log-logistic distribution models. The E-nose sensors succeeded in discriminating between the aroma of non-treated and treated OJ based on linear discriminant analysis (LDA). Furthermore, terpenes, alcohol and partially aromatic compounds were the main spoilage indicators of OJ during storage based on E-nose analysis and confirmed by HS-SPME-GC/MS analysis. Thus, MTS significantly extended the shelf life of the quality quartet of natural OJ at 4 °C. E-nose-GC/MS fusion offered odor fingerprints to AAT microorganisms that can be used as spoilage index without using traditional food analysis techniques. The proposed approach can be used as an alternative tool for rapid detection of spoilage microorganisms in OJ.     

The impact of Mg content on the structural,electrical and optical properties of MgZnO alloys: A first principles study

The structural, electronic and optical properties of wurtzite MgZnO with Mg concentration ranging from 0 to 0.5 are studied using the first principle calculations. It's found that the lattice constants c and specific volume V of the MgZnO alloys decrease and their band gap widens as Mg concentration increases, which are in agreement with our experimental results. A particular Mg concentration is found to exist at around 0.375, equals to which the corresponding MgZnO alloy has the minimum width of the top valence band. This indicates that Mg concentration may be used to tune the electronic properties of MgZnO alloy. Meanwhile, it's also found that the energy response range of the optical spectrums decreases with the increase of Mg concentration. There are different energy shifts toward high energy (blue shift) of the peaks in the optical spectrums with the increase of Mg concentration, which are explained by the variations of the density of states in details. So the electronic and optical properties of MgZnO may be tuned through Mg concentration, and our research results may provide meaningful references to the development and design of photoelectric devices.     

Effects of argon plasma treatment on the interfacial adhesion of PBO fiber/bismaleimide composite and aging behaviors

This paper is concerned with the influence of argon plasma on the interfacial adhesion of PBO fiber/bismaleimide composites and aging behaviors. The interlaminar shear strength (ILSS) was greatly increased to 62.3 MPa with an increase of 39.7% after treatment for 7 min at 80 Pa, 200 W. A small amount of O and N atoms was incorporated onto the fiber surface, but the plasma caused C-O bonds to break and generated OC-N groups. The fiber surface roughness increased, contributing much to the wettability. However, long-time treatment excessively destroyed the inherent and newly created structures. The SEM images suggested that the fracture shifted from the interface to the matrix. The modification effects degraded with storage time in the air and the ILSS decreased to approximately 54.0 MPa after 10-30 days. The composite had low water absorption of 2.0 wt% and a high retention of 90% in the ILSS at moisture conditions.     

The impact of quick-freezing methods on the quality,moisture distribution and microstructure of prepared ground pork during storage duration

The aim of present study was to investigate the influences of ultrasound-assisted immersion freezing (UIF), immersion freezing (IF) and air freezing (AF) on the quality, moisture distribution and microstructure properties of the prepared ground pork (PGP) during storage duration (0, 15, 30, 45, 60, 75 and 90 days). UIF treatment significantly reduced the freezing time by 60.32% and 39.02%, respectively, compared to IF and AF (P < 0.05). The experimental results of quality evaluation revealed that the L* and b* values, juice loss, cooking loss, TBARS values and carbonyl contents were decreased in the UIF treated samples, while the a* value, peak temperatures (T_m), enthalpy (ΔH) and sulfhydryl contents were significantly higher than those of IF and AF treated samples (P < 0.05). In addition, low-field nuclear magnetic resonance (LF-NMR) and differential scanning calorimetry (DSC) analysis demonstrated that UIF inhibited the mobility of immobilized water and reduced the loss of immobilized and free water, and then a high water holding capacity (WHC) was achieved. Compared to the IF and AF treatments, the UIF treated PGP samples possessed better microstructure. Therefore, UIF could induce the formation of ice crystals with smaller size and more even distribution during freezing process, which contributed to less damage to the muscle tissue and more satisfied product quality.