A General Palladium‐Catalyzed Hiyama Cross‐Coupling Reaction of Aryl and Heteroaryl Chlorides

A general palladium‐catalyzed Hiyama cross‐coupling reaction of aryl and heteroaryl chlorides with aryl and heteroaryl trialkoxysilanes by a Pd(OAc)₂/ L2 catalytic system is presented. A newly developed water addition protocol can dramatically improve the product yields. The conjugation of the Pd/ L2 system and the water addition protocol can efficiently catalyze a broad range of electron‐rich, ‐neutral, ‐deficient, and sterically hindered aryl chlorides and heteroaryl chlorides with excellent yields within three hours and the catalyst loading can be down to 0.05 mol % Pd for the first time. Hiyama coupling of heteroaryl chlorides with heteroaryl silanes is also reported for the first time. The reaction can be easily scaled up 200 times (100 mmol) without any degasification and purification of reactants; this facilitates the practical application in routine synthesis.     

Solvent‐Free One Pot Synthesis of 2‐aryl/Heteroarylbenzothiazoles Using Hypervalent Iodine (III) Reagents

In this article, an efficient, environmentally benign, one‐pot and simple synthesis of 2‐aryl/heteroarylbenzothiazoles by the reaction of 2‐aminothiophenol and aryl/heteroaryl aldehydes mediated by hypervalent iodine (III) reagents under solvent‐free condition at room temperature is demonstrated. All the reactions were carried out by grinding the reactants (2‐aminothiophenol and aryl/heteroaryl aldehydes) with hypervalent iodine (III) reagents in a mortar with pestle. Phenyliodine bistrifluoroacetate act as an efficient oxidizing reagent in comparison to iodobenzene diacetate in term of reaction time but yields are comparative. The advantages of this protocol are the one‐step procedure, mild reaction conditions, high yields of the products, and no side reactions.     

A novel four-component reaction for the synthesis of functionalised dihydropyrimidines

In a multi-component reaction (MCR) of a phosphonate, nitriles, aldehydes and isocyanates, N3-functionalised dihydropyrimidines can be synthesised efficiently via a Horner-Emmons/aza Diels-Alder pathway.     

Amine-catalyzed direct assembly of indanedione-fused spirobenzo[a]carbazoles from α,α-dicyanomethylidenecarbazoles

An unprecedented amine-catalyzed stereoselective reaction of α,α-dicyanomethylidenecarbazoles with indane-1,3-dione and aryl/heteroaryl aldehydes afforded a series of indanedione-fused benzo[a]carbazoles. The plausible mechanism for the formation of the final products result from the above MCR is described based on successive Knoevenagel/Michael/nucleophilic reactions. The products were obtained in moderate to good yields without the use of any chromatographic techniques. The structures of the synthesized spirocycloadducts were confirmed by elemental analysis and spectral data (FT-IR, ¹H NMR, and 13C NMR).     

Synthesis and photophysical properties of benzo[c]thiophene,p-phenylene-, triphenylamine-, and pyrene-based vinylenes

An efficient synthesis of benzo[c]thiophenyl/p-phenylenyl/pyrenyl phosphonate esters has been achieved using ZnBr₂-catalyzed Michaelis–Arbuzov reaction of corresponding benzyl alcohol/bromides at room temperature. Horner–Wadsworth–Emmons reaction of the phosphonate esters with aryl/heteroaryl aldehydes in the presence of t-BuOK furnished the vinylenes in good yields. The absorption and emission characteristics of the synthesized vinylenes were also reported.     

An eco-friendly procedure for one-pot synthesis of β-phosphonomalonates: micellar solution of sodium stearate catalyzes tandem Knoevenagel-phospha-Michael reaction of aldehydes, malonitrile, and phosphites in aqueous media

A new, one-pot convenient method for the synthesis of a variety of β-phosphonomalonates by a tandem Knoevenagel-phospha-Michael reaction of phosphite esters with aryl/heteroaryl/alkyl aldehydes and malonitrile in an aqueous micellar solution of sodium stearate is described. This method offers several advantages, such as using a cheap and environmentally benign reaction media, low loadings of sodium stearate as catalyst and offers good yields.     

Direct preparation of copper organometallics bearing an aldehyde function via an iodine-copper exchange

The iodine-copper exchange reaction allows the direct preparation of various aryl, heteroaryl and alkenyl cuprates bearing a formyl group, thus allowing a direct synthesis of polyfunctional aldehydes without the need of protecting groups or an additional oxidation step.     

An efficient silane-promoted nickel-catalyzed amination of aryl and heteroaryl chlorides

A new silane-promoted nickel-catalyzed amination of aryl chlorides with 0.5 mol % of Ni(acac)2, 1 mol % of 3,5,6,8-tetrabromo-1,10-phenanthroline, and polymethylhydrosiloxane was developed. A broad range of aryl and heteroaryl chlorides can be coupled with secondary amines and anilines to give the desired (het)arylamines in good to excellent yields. The reaction is sensitive to the nature and amount of the silane promoter.     

Fluoride-promoted rearrangement of organo silicon compounds: a new synthesis of 2-(arylmethyl)aldehydes from 1-alkynes

A new approach to 2-(arylmethyl)aldehydes 4 based upon a 1,2-anionotropic rearrangement of an aryl group is presented. The synthetic sequence begins with a silylformylation reaction of terminal acetylenes 5 with aryl and heteroaryl silanes 6, followed by treatment of the products (Z)-1 with TBAF. The optimization of the experimental conditions of the fluoride-promoted step is described, together with the synthetic potentialities of the process. A plausible mechanism of the rearrangement reaction is reported that suggests the addition of the fluoride ion to the arylsilicon moiety of beta-silylalkenals (Z)-1 and the consequent migration of the aryl group to the adjacent carbon atom. Both aryl and heteroaryl substituents can rearrange without any loss of configuration. Bromo-functionalized substrates undergo an intramolecular reaction that affords exclusively carbacyclobenzyl aldehydes, further enhancing the high synthetic value of this method.     

Pd(II)催化下苄基溴化锌或烯丙基碘化锌与芳香醛的加成反应

在[PdCl2(PPh3)2]催化下,有机卤化锌试剂与芳香醛顺利地发生反应得到了较高产率的1,2-加成产物.此方法避免了CuCN/2LiCl的使用,为通过有机卤化锌试剂合成芳基取代的仲醇类化合物提供了一条简便的途径.     

Asymmetric construction of quaternary carbon stereocenters: high stereoselection in Mukaiyama aldol reactions of 2-siloxyindoles with chiral aldehydes

[reaction: see text] A new synthesis of enantiopure 3,3-disubstituted oxindoles by stereoselective Mukaiyama aldol reaction of 3-substituted 2-siloxyindoles and chiral, enantiopure aldehydes having nitrogen or oxygen substituents at the alpha carbon is described. When the C3 substituent of the prochiral nucleophile is aryl or heteroaryl, stereoselectivity is high (10-80:1).     

钯和四齿膦配体催化剂应用于Heck反应的研究

设计合成了以联萘二胺为骨架的四齿膦配体N,N,N',N'-四(二苯基膦甲基)-(1,1'-联萘)-2,2'-二胺,并将其与钯组成的催化体系用于苯乙烯和芳卤的Heck反应,该催化体系对各种卤代芳烃都表现出了很高的催化活性.对活化底物对溴苯腈,即使底物与催化剂的物质的量比达到10 000,反应20 h几乎能达到定量转化;该催化体系对活性更低的杂环底物也取得了良好的催化效果.     

Palladium-catalyzed amination of aryl and heteroaryl tosylates at room temperature

Mild palladium-catalyzed aminations of aryl tosylates and the first aminations of heteroaryl tosylates are described. In the presence of the combination of L2Pd(0) (L = P(o-tol)3) and the hindered Josiphos ligand CyPF-t-Bu, a variety of primary alkylamines and arylamines react with both aryl and heteroaryl tosylates at room temperature to form the corresponding secondary arylamines in high yields with complete selectivity for the monoarylamine. These reactions at room temperature occur in many cases with catalyst loadings of 0.1 mol % and 0.01 mol % in one case, constituting the most efficient aminations of aryl tosylates by nearly 2 orders of magnitude. This catalyst is made practical by the development of a convenient method to synthesize the L2Pd(0) precursor. This complex is stable to air as a solid. In contrast to conventional relative rates for reactions of aryl sulfonates, the reactions of aryl tosylates are faster than parallel reactions of aryl triflates, and the reactions of aryl tosylates are faster than parallel or competitive reactions of aryl chlorides.     

Expedited palladium-catalyzed amination of aryl nonaflates through the use of microwave-irradiation and soluble organic amine bases

[reaction: see text] Microwave-assisted, palladium-catalyzed C-N bond-forming reactions with aryl/heteroaryl nonaflates and amines using the soluble amine bases DBU (1,8-diazabicyclo[5.4.0]undec-7-ene) or MTBD (7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene) and ligands (1-3) resulted in good to excellent yields (71-99%) of arylamines in short reaction times (1-45 min).     

Continuous-flow synthesis of nitriles from aldehydes via Schmidt reaction

Using continuous-flow synthesis of nitriles by Schmidt reaction, a variety of aldehydes could be smoothly transformed into the desired nitriles in good to excellent yields. The mild reaction conditions and the flowing reaction system greatly improved the safety and make the reaction easy to scale up.     

Efficient synthesis of β-acetamido ketones using BF3/Et2O: a fertile approach toward avoiding usage of acetyl chloride

Abstract

A simple and efficient one pot synthesis of β-acetamido ketones from reaction of aldehydes, enolizable ketones, alkyl/aryl nitriles, and BF₃/Et₂O catalyst under microwave irradiations is described. This method allows synthesis of β-acetamido ketones without using corrosive and hazardous acetyl chloride. It is applicable for diversified aldehydes and active methylene ketones supported by synthesizing varieties of β-acetamido ketones. As per literature, majority of synthetic methods of β-acetamido ketones are restricted to use of acetonitrile lonely, as a nitrile component. This method is found to be equally effective for range of nitriles, also. Key features of reported method are simple reaction protocol, better yields, shorter reaction time, and nonhazardous reaction conditions which support the “Green Chemistry approach.”     

Rapid Synthesis of Aryl Fluorides in Continuous Flow through the Balz–Schiemann Reaction

The Balz–Schiemann reaction remains a highly utilized means for preparing aryl fluorides from anilines. However, the limitations associated with handling aryl diazonium salts often hinder both the substrate scope and scalability of this reaction. To address this, a new continuous flow protocol was developed that eliminates the need to isolate the aryl diazonium salts. The new process has enabled the fluorination of an array of aryl and heteroaryl amines.     

Novel synthesis of tetrahydro-β-carbolines and tetrahydroisoquinolines via three-component reaction using hexagonally ordered mesoporous AlSBA-15 catalysts

Tryptamine, aryl aldehyde, and benzyl chloride undergo smooth coupling using well-ordered mesoporous AlSBA-15 catalyst with hexagonal porous structure in acetonitrile at 80 °C to furnish tetrahydrocarbolines in good yields with a high selectivity. This reaction also proceeds with homoveratrylamine to give the corresponding tetrahydroisoquinolines. A variety of aryl and heteroaryl aldehydes have also been used for producing tetrahydrocarbolines in high yields. This AlSBA-15-promoted Pictet-Spengler reaction provides a mild alternative to the traditional Brönsted or Lewis acids typically employed for the preparation of tetrahydrocarbolines and tetrahydroisoquinolines.     

An efficient and convenient KF/Al2O3 mediated synthesis of nitriles from aldehydes

KF/Al₂O₃ brings about a facile one-pot and economical conversion of various aryl and alkyl aldehydes into the corresponding nitriles in high yields by reaction with hydroxylamine hydrochloride.     

A facile and rapid one-step synthesis of 8-substituted xanthine derivatives via tandem ring closure at room temperature

N-Bromo succinimide (NBS) was found to be an efficient and regioselective reagent in combination with AIBN for an unprecedented, facile and rapid one-step synthesis of 8-substituted xanthine derivatives at room temperature. The inexpensive, nontoxic and readily available NBS efficiently promoted the condensation of several aryl/cycloaryl/heteroaryl aldehydes with 5,6-diamino-1,3-dimethyluracils in presence of catalytic amount of AIBN in a single step via radical chain reaction. The notable advantages of this protocol were short reaction time, milder reaction conditions, simple work-up procedure, no requirement for chromatographic separation, use of non-hazardous reagent/solvent and applicable to a variety of substrates.