Theoretical studies of the oxidative addition of PhBr to Pd(PX3)2 and Pd(X2PCH2CH2PX2) (X = Me, H, Cl)

The density functional theory calculations were used to study the influence of the substituent at P on the oxidative addition of PhBr to Pd(PX₃)₂ and Pd(X₂PCH₂CH₂PX₂) where X = Me, H, Cl. It was shown that the C_ipso-Br activation energy by Pd(PX₃)₂ correlates well with the rigidity of the X₃P-Pd-PX₃ angle and increases via the trend X = Cl < H < Me. The more rigid the X₃P-Pd-PX₃ angle is, the higher the oxidative addition barrier is. The exothermicity of this reaction also increases via the same sequence X = Cl < H < Me. The trend in the exothermicity is a result of the Pd(II)-PX₃ bond strength increasing faster than the Pd(0)-PX₃ bond strength upon going from X = Cl to Me. Contrary to the trend in the barrier to the oxidative addition of PhBr to Pd(PX₃)₂, the C_ipso-Br activation energy by Pd(X₂PCH₂CH₂PX₂) decreases in the following order X = Cl > H > Me. This trend correlates well with the filled d_π orbital energy of the metal center. For a given X, the oxidative addition reaction energy was found to be more exothermic for the case of X₂PCH₂CH₂PX₂ than for the case of PX₃. This effect is especially more important for the strong electron donating phosphine ligands (X = Me) than for the weak electron donating phosphine ligands (X = Cl).     

Synthesis and characterization of methylpalladium(II) dithiolate complexes of the type [PdMe(SS)(ER3)] (SS = S2CNR 2, S2COEt, S2P(OR)2, S2 PPh2; ER3 = PMePh2, PPh3, AsPh3)

Methylpalladium(II) dithiolate complexes of the type [PdMe(SS)(ER₃] (SS = S₂ CNR₂ (R = Me or Et), S₂COEt, S₂P(OR)₂ (R = Et, ⁿPr, ⁱPr), S₂PPh₂; ER₃ = PMePh₂, PPh₃, AsPh₃) have been synthesized by the reaction of [Pd₂Me₂(μ-Cl)₂(PMePh₂)₂] with sodium/potassium/ammonium salts of the dithio acid or by treatment of [PdMeCl(cod)] with ER₃ followed by sodium/potassium/ammonium salts of the dithio ligand. All the complexes were characterized by elemental analysis, IR and nuclear magnetic resonance (¹H, ³¹P) data.     

Pt(II)Cl2(DMSO)2-catalyzed cross-coupling of polyfluoroaryl imines

PtCl₂(DMSO)₂ has been identified as a readily accessible and effective C-F activation precatalyst. We report herein the study of reaction optimization and substrate scope. A comparison is made with previously reported [Pt₂Me₄(SMe₂)₂] and PtCl₂(SMe₂)₂ precatalysts.     

Phase polymorphism of [Zn(DMSO)6](ClO4)2 studied by differential scanning calorimetry

Four solid phases of [Zn(DMSO)₆](ClO₄)₂ have been detected by differential scanning calorimetry (DSC). Specifically, the phase transitions were detected between: metastable phase KII ↔ supercooled phase K0 at , stable phase KIb ↔ stable phase KIa at , stable phase KIa ↔ stable phase K0 at . At T_m2 = 389 K crystals partially and at T_m1 = 465 K completely melts. From the entropy change values it was concluded that the phases: K0 and K0′ are the orientationally dynamically disordered phases, so called ODDIC crystals, and phases KIa, KIb and metastable KII are dynamically ordered but with some degree of positional disorder.     

[Ni(phen)2(3,5-DMBA)](m-MBA)2(H2O)2配合物的合成、晶体结构及电化学分析

The title complex of nickel (II) with 3,5-dimethylbenzoic acid, m-methylbenzoic acid and 1,10- phenanthroline was synthesized and characterized. Crystal data for this complex: triclinic, space group P1, a=1.198 5(2) nm, b=1.315 3(2) nm, c=1.531 8(3) nm, α=92.602(3)°, β=103.292(3)°, γ=114.849(3)°, V=2.104 7(6) nm³, D_c=1.361 g·cm^-3, Z=2, F(000)=902, final GooF=1.071, R₁=0.067 2, wR₂=0.155 5. The crystal structure shows that the nickel ion is coordinated with four nitrogen atoms of two 1,10-phenanthroline molecules and two oxygen atoms of one 3,5-dimethyl benzoic acid molecule, forming a distorted octahedral coordination geometry. The cyclic voltametric behavior of the complex was also investigated. CCDC: 286966.     

2-巯甲基噻吩与[Mn2(CO)10]原子簇化合物反应生成[MnS(CO)3]4及结构表征(英)

The compound [Mn₂(CO)₁₀] reacts with 2-(Methylthio)thiophene (C₅H₆S₂) while refluxing in xylene to afford a methylthio-tetramanganese product [MnS(CO)₃]₄, in which C₅H₆S₂ is cleaved with loss of thiophene. The crystal structure of [MnS(CO)₃]₄ has been studied by direct method. Based on the 21 685 unique reflections collected using MoKα of X-ray radiation and a CCD-based detector, it is refined to an agreement index (R₁) of 0.079 0. The cell is triclinic with dimensions: a=1.719 49 nm, b=1.959 2 nm, c=2.632 6 nm and α=79.733°, β=71.407°, γ=89.387°. There are 12 unit cells of [MnS(CO)₃]₄ in the cell, with space group P1.     

一种镧系-过渡金属二维氰桥配合物[Nd(DMSO)2(H2O)2][Ni(CN)4]Cl(DMSO=二甲亚砜)的合成和晶体结构(英)

The cyano-bridged bimetallic complex [Nd(DMSO)₂(H₂O)₂][Ni(CN)₄]Cl with two-dimensional gridding molecule structure was synthesized and characterized. In the complex all four cyano groups of unit Ni(CN)₄^2- are bound to Nd³⁺ ions. The crystal data for the title complex: monoclinic, space group P2₁/c, a=0.780 0(3) nm, b=1.509 7(6) nm, c=1.683 2(6) nm, β=115.231(14)°, Z=4, μ=4.311 mm^-1, final R₁=0.020 9, wR₂=0.045 4. CCDC: 272214.     

配合物[Cd(NIT4Py)2][Au(CN)2]2的合成与晶体结构

A Cd(II)-nitronyl nitroxide radical complex with dicyanoaurate(I) bridges [Cd(NIT4Py)₂][Au(CN)₂]₂, was synthesized and characterized by elemental analyses, IR spectrum and X-ray diffraction single-crystal structure analysis. Crystal data for the complex: triclinic, space group P1, a=0.720 9(11) nm, b=0.960 3(15) nm, c=1.284(2) nm, α=75.38(2)°, β=85.46(2)°, γ=68.38(2)°, V=0.800(2) nm³, Z=1, and R₁ [I>2σ(I)]=0.055 8. The title complex consists of infinite one-dimensional chains of [Cd(NIT4Py)₂][Au(CN)₂]₂, in which [Cd(NIT4Py)₂] moieties are conne-cted by [Au(CN)₂]^- μ₂-bridging ligands. Each cadmium(II) ion is six-coordinated in a distorted and centrosymmetric octahedral environment. CCDC: 258357.     

配合物[Co(qina)2(DMSO)2]的结构及其对乙酸-1-萘酯水解的催化研究

合成了配合物[Co(qina)₂(DMSO)₂]单晶, 其中, qina^－为喹哪啶酸根, DMSO为二甲基亚砜. 配合物为单斜晶系, P2(1)/C空间群, 2个qina^－配体以氮原子和氧原子与Co(II)离子螯合配位, 2个DMSO以氧原子与Co(II)离子轴向配位, 形成规则的八面体构型配合物, 分子之间存在π-π堆积弱相互作用. 该配合物可显著提高乙酸-1-萘酯的水解速率, 在配合物浓度和萘酯浓度各为1.0×10^－4和3.0×10^－5 mol•L^－1条件下, 酯的水解速率提高460倍.     

配合物[Co(qina)2(H2O)2]•2DMSO的晶体结构及其与DNA作用研究

合成了配合物[Co(qina)₂(H₂O)₂]•2DMSO单晶(qina为喹哪啶酸). 配合物属于单斜晶系, P2(1)/n空间群, 其分子结构为规则的八面体构型, qina以氮原子和羧酸根氧原子与Co^2＋离子配位, 两个水分子为轴向配位. 配合物之间富有配位水分子分别与DMSO的氧原子、qina中未与Co(II)配位的氧之间氢键作用. 配合物与鱼精DNA作用的紫外光谱和荧光光谱表明, 两者之间有一定的相互作用, 并可能以局部插入方式为主.     

Synthesis and characterization of new sulfide aggregates of the type [{Pt2(μ3-S)2(P-P)2}M(C6F5)2] (M=Ni, Pd, Pt; P-P=2PPh3, 2PMe2Ph, dppf)

The reaction of [Pt₂(μ-S)₂(P-P)₂] (P-P=2PPh₃, 2PMe₂Ph, dppf) [dppf=1,1^′-bis(diphenylphosphino)ferrocene] with cis-[M(C₆F₅)₂(PhCN)₂] (M=Ni, Pd) or cis-[Pt(C₆F₅)₂(THF)₂] (THF=tetrahydrofuran) afforded sulfide aggregates of the type [{Pt₂(μ₃-S)₂(P-P)₂}M(C₆F₅)₂] (M=Ni, Pd, Pt). X-ray crystal analysis revealed that [{Pt₂(μ₃-S)₂(dppf)₂}Pd(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Ni(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Pd(C₆F₅)₂] and [{Pt₂(μ₃-S)₂(PMe₂Ph)₂}Pt(C₆F₅)₂] have triangular M₃S₂ core structures capped on both sides by μ₃-sulfido ligands. The structural features of these polymetallic complexes are described. Some of them display short metal-metal contacts.     

Activation of C-H, C-C and C-I bonds by Pd and cis-Pd(CO)2I2. Catalyst-substrate adaptation

We have studied the oxidative addition reactions of methane and ethane C-H, ethane C-C and iodomethane C-I bonds to Pd and cis-Pd(CO)₂I₂ at the ZORA-BP86/TZ(2)P level of relativistic density functional theory (DFT). Our purpose, besides exploring these particular model reactions, is to understand how the mechanism of bond activation changes as the catalytically active species changes from a simple, uncoordinated metal atom to a metal-ligand coordination complex. For both Pd and cis-Pd(CO)₂I₂, direct oxidative insertion (OxIn) is the lowest-barrier pathway whereas nucleophilic substitution (S_N2) is highly endothermic, and therefore not competitive. Introducing the ligands, i.e., going from Pd to cis-Pd(CO)₂I₂, causes a significant increase of the activation and reaction enthalpies for oxidative insertion and takes away the intrinsic preference of Pd for C-I over C-H activation. Obviously, cis-Pd(CO)₂I₂ is a poor catalyst in terms of activity as well as selectivity for one of the three bonds studied. However, its exploration sheds light on features in the process of catalytic bond activation associated with the increased structural and mechanistic complexity that arises if one goes from a monoatomic model catalysts to a more realistic transition-metal complex. First, in the transition state (TS) for oxidative insertion, the C-X bond to be activated can have, in principle, various different orientations with respect to the square-planar cis-Pd(CO)₂I₂ complex, e.g., C-X or X-C along an I-Pd-CO axis, or in between two I-Pd-CO axes. Second, at variance to the uncoordinated metal atom, the metal complex may be deformed due to the interaction with the substrate. This leads to a process of mutual adjustment of catalyst and substrate that we designate catalyst-substrate adaptation. The latter can be monitored by the Activation Strain model in which activation energies ΔE^≠ are decomposed into the activation strain of and the stabilizing TS interaction between the reactants in the activated complex: .     

A Suberato-Pillared Mn(II) Coordination Polymer: Hydrothermal Synthesis, Crystal Structure, and Magnetic Properties of Mn2(H2O)[O2C(CH2)6CO2]2

A suberato-pillared Mn(II) coordination polymer Mn₂(H₂O)(C₈H₁₂O₄)₂ was hydrothermally synthesized at 170°C for 3 days and characterized by single-crystal X-ray diffraction. Crystal data: monoclinic, C2/c, Z=4, a=26.544(5), b=7.617(2), c=9.187(2) Å, β=105.38(2)°, V=1791.0(7) ų, R₁=0.064 and wR₂=0.162. The compound shows a layered structure consisting of inorganic Mn oxygen polyhedral layers and organic regions. The inorganic Mn oxygen layers are generated from Mn₂O₁₀ bioctahedral units, which share corners with neighbors to form zigzag chains along the [001] direction and are, along the [010] direction, further connected by carboxylate groups of the suberato ligands and hydrogen bonds. The magnetic studies indicated that the compound becomes antiferromagnetic at low temperatures with T_Néel=12 K and follows Curie-Weiss law χ_m(T+22.429)= 4.48 cm³ mol⁻¹ K between 25 and 300 K. Upon heating in Ar stream, Mn₂(H₂O)(C₈H₁₂O₄)₂ decomposes in three steps.     

配合物(BenzMeIm)2[PtCl4]的合成与表征

通过离子液体氯化1-苄基-3-甲基咪唑（BenzMeIm-Cl）与PtCl₂的反应,合成了配合物（BenzMeIm）₂[PtCl₄],并用元素分析、红外光谱、紫外-可见光谱、¹H NMR、¹³C NMR和单晶X射线衍射对其进行了表征。单晶X射线分析表明,配合物结构属于P2₁/c空间群,晶胞参数和结构解析参数为：a=0.981 80（5）nm,b=0.861 47（3）nm,c=0.144 332（7）nm,β=92.480（2）°,V=121.96（1）nm³,R₁=0.014 4,wR₂=0.038 8。     

Ate complexes of Ge(II) and Sn(II) with bidentate ligands [LiE(OCH2CH2NMe2)3]2 (E=Ge, Sn): synthesis and structure

The reaction of equimolar quantities of LiOCH₂CH₂NMe₂ and E¹⁴(OCH₂CH₂NMe₂)₂ (E¹⁴=Ge, Sn) in ether yielded new ate complexes [LiE¹⁴(OCH₂CH₂NMe₂)₃]₂ (E¹⁴=Ge (1), Sn (2)) with bidentate ligands. The compounds 1 and 2 are white crystalline substances which are highly soluble in THF and pyridine and very sensitive to the traces of oxygen and moisture. The structures of these compounds are studied by X-ray diffraction analysis. The ate complexes 1 and 2 are powerful nucleophiles and may be employed as ligands (neutral) in the coordination chemistry of the transition metals. The electronegative O-substituents at the divalent E¹⁴ atoms render them less oxidizable than alkyl- or aryl-substituted derivatives, and the bidentate ligands, owing to intramolecular donor-acceptor interactions, make them more thermodynamically stable compared to monodentate ligands.     

Synthesis and structural characterization of cobalt(II) and zinc(II) complexes with 2-(indazol-1-yl)-2-thiazoline (TnInA). X-ray characterization of [CoCl2(TnInA)2] · C2H6O and [(M)(TnInA)2(H2O)2](NO3)2 (M = Co, Zn)

Several complexes of 2-(indazol-1-yl)-2-thiazoline (TnInA) with the divalent ions Co and Zn have been synthesized by the direct combination of the ligand and the metal chloride or nitrate hydrated salts in ethanol. These complexes have been characterized by a variety of physical–chemical techniques. Moreover, the structures of [CoCl₂(TnInA)₂] · C₂H₆O (1) and [(M)(TnInA)₂(H₂O)₂](NO₃)₂ (M = Co, 3; Zn, 4) were determined by single-crystal X-ray diffraction. In all the complexes, the ligand TnInA bonds to the metal ion through the indazole and thiazoline nitrogen atoms. In complex 1 the environment around the cobalt ion may be described as a distorted octahedron with two TnInA ligands and two chlorine ligands. Compounds 3 and 4 are isostructural with a distorted octahedral geometry around the metal center, being linked to two water molecules and two TnInA ligands. However, in complex [ZnCl₂(TnInA)] (2) the zinc atom is four-coordinated with a probable tetrahedral environment with two chloro ligands and one TnInA ligand bonded to the metal ion.     

Hydrolytic cleavage of Schiff bases by [RuCl2(DMSO)4]

New hexa-coordinated Ru(II) complexes of the type [RuCl₂(DMSO)₂(diamine)] (diamine = o-phenylenediamine and ethylenediamine) have been prepared by reacting cis-[RuCl₂(DMSO)₄] with Schiff bases (H₂sal-en, 1; H₂nap-en, 2; H₂sal-o-pdn, 3; H₂nap-o-pdn, 4) in a 1:1 ratio. The ligands, which were expected to act as tetradentate (N₂O₂) chelates under the normal reaction conditions, were found to undergo hydrolytic cleavage to form the diamine and the corresponding aldehyde. All the complexes have been characterized by analytical and spectroscopic (IR, electronic and¹H NMR) data. Single-crystal X-ray analysis of the complex [RuCl₂(DMSO)₂(o-pndn)] revealed that the coordination environment around the ruthenium metal consists of a N₂S₂Cl₂ octahedron.     

Two New Octahedral Cd(II) Complexes [Cd(L)2] and {[Cd(LH)2(SCN)2]H2O} [L = C6H5C(OH)NN = C(CH3)C5H4N]: Synthesis and Structural Studies

Two new octahedral Cd(II) complexes [Cd(L)₂] (1) and {[Cd(LH)₂(SCN)₂]H₂O} (2) [where LH = C₁₄H₁₃N₃O] are synthesized using a tridentate hydrazone ligand (LH) and they are characterized by elemental analysis, IR spectra, NMR spectra, thermal studies and finally the structures have been determined by single crystal X-ray diffraction. Complex 1 crystallizes in monoclinic system, space group C2/c with a = 22.565(6) ?, b = 10.252(3) ?, c = 12.187(4) ?, β = 118.851(2)^∘, and Z = 4. Complex 2 also crystallizes in the monoclinic system, space group P2₁/c with a = 9.257(9)?, b = 17.809(2)?, c = 9.548(9)?, β = 107.439(4)^∘, and Z = 2. In 1 the ligand binds the Cd(II) ion in tridentate fashion, whereas in 2 it acts as a bidentate ligand.     

Transition metal complexes of the tripodal ligand 4-(2′-pyridylmethyl)-4-azaheptane-1,7-diamine. Crystal structures of [CuLCl]ClO4 and [NiL(MeCN)2](ClO4)2

The tripodal ligand 4-(2′-pyridylmthyl)-4-azaheptane-1,7-diamine has been prepared by reaction of 2-aminemethyl pyridine with acrylonitrile, followed by the reduction of the nitrile groups. Copper(II), nickel(II), zinc(II), cobalt(III) and chromium(III) complexes of the ligand have been prepared and characterized and the crystal structures of the complexes [CuLCl]ClO₄ and [NiL(MeCN)₂](ClO₄)₂ determined. The copper complex is five coordinate with approximate square pyramidal stereochemistry with the apical position occupied by a primary amine donor. The nickel complex is octahedral with the pyridine nitrogen donor lying trans to an acetonitrile ligand.