Highly stereoselective synthesis of novel trans-thiophenylene-silylene-vinylene-arylene molecular and macromolecular compounds

Novel stereoregular molecular compounds 8-13 containing thiophenylene-silylene-vinylene-phenylene units have been synthesised via highly effective silylative coupling of styrene and 1,4-divinylbenzene (7) with respective vinylsilylthiophenes (3, 4) and bis(vinylsilyl)thiophenes (5, 6) catalyzed by RuHClCO(PCy₃)₂. Respective copolymers (14, 15) were produced via silylative copolycondensation of 5 and 6 with 7. All products were isolated and characterised by NMR, MS, HRMS and two of them 10 and 11 by X-ray method. Catalytic study as well as stoichiometric reactions of Ru-H (1) with 2-(vinylsilyl)thiophene (3) and Ru-Si (16) with styrene confirmed the mechanism of the silylative coupling olefins with vinylsilicon compounds.     

Syntheses and crystal structures of di- and triorganotin derivatives with 2,5-dimercapto-1,3,4-thiodiazole

A series of organotin(IV) complexes with 2,5-dimercapto-1, 3, 4-thiodiazole (HHdmt) of the type (R_nSnCl_m)₂(dmt) (m=0, n=3, R=Ph 1, PhCH₂2, n-Bu 3; m=1, n=2, R=Ph 4) and [R₂Sn(dmt) · L]_n (L=0.5C₆H₆, R=CH₃5; L=0, n=5, R=n-Bu 6) have been synthesized. All complexes 1-6 were characterized by elemental analysis, IR, ¹H and ¹³C NMR spectra. And except for 3, complexes 1, 2, 4, 5 and 6 were also determined by X-ray crystallography. The tin atoms of complexes 1, 2, 3 and 4 are all five-coordinated. The geometries at tin atoms of 1, 2, 3 and 4 are distorted trigonal bipyramidal. The tin atoms of complexes 5 and 6 are six-coordinated and their geometries are distorted octahedral.     

Highly stereoselective synthesis of para-substituted (E)-N-styrylcarbazoles via sequential silylative coupling-Hiyama coupling reaction

A series of new para-substituted (E)-(N)-styrylcarbazoles, i.e., eight (E)-9-[2-(aryl)ethenyl]-9H-carbazoles (5-12) and 1,4-bis[(E)-2-(9H-carbazol-9-yl)vinyl]benzene (13), have been synthesized in high yield and stereoselectively by a sequential silylative coupling-Hiyama coupling reaction, i.e., coupling of commercially available 9-vinylcarbazole with vinyltriethoxysilane or divinyltetramethyldisiloxane in the presence of [RuHCl(CO)(PCy₃)₂] (I), followed by Pd (II) catalyzed cross-coupling with para-substituted iodobenzenes.The tandem procedure has facilitated the synthesis of 13. X-ray structures of the intermediate silylvinylcarbazole (4), as well as products 12 and 13 have been obtained.     

Ruthenium titanocene and ruthenium titanium half-sandwich bimetallic complexes in catalytic cyclopropanation

The reaction of the phosphine functionalised titanium half-sandwich complexes 7, 9 and 10 with the binuclear complex [(p-cymene)RuCl₂]₂ allowed the access to three new early-late bimetallic complexes (p-cymene)[(μ-η⁵:η¹-C₅H₄(CH₂)_nPR₂)TiX₃]RuCl₂ (11-13). The structure of 11 (n = 0, X = Cl) has been confirmed by X-ray diffraction. The ruthenium titanium half-sandwich bimetallic complexes so formed and the ruthenium titanocene analogues 4-6 catalyse the addition of ethyl diazoacetate to styrene with high selectivity toward cyclopropanation versus metathesis contrary to the monometallic complexes (p-cymene)RuCl₂PR₃.     

Alkyl group dependence on structure and magnetic properties in layered cobalt coordination polymers containing substituted glutarate ligands and 4,4′-bipyridine

Five two-dimensional divalent cobalt coordination polymers containing 4,4′-bipyridine (bpy) and substituted or unsubstituted glutarate ligands have been prepared hydrothermally and structurally characterized by single-crystal X-ray diffraction. [Co(mg)(bpy)]_n (1, mg=3-methylglutarate) forms a (4,4) rhomboid grid structure based on the connection of {Co₂(CO₂)₂} dimeric units. Using the more sterically encumbered ligands 3,3-dimethylglutarate (dmg) and 3-ethyl, 3-methylglutarate (emg) generated {[Co(dmg)(bpy)(H₂O)]·2H₂O}_n (2) and {[Co(emg)(bpy)(H₂O)]·H₂O}_n (3), respectively. These complexes manifest {Co(CO₂)}_n chains linked into 2-D by aliphatic dicarboxylate and bpy ligands. The “tied-back” substituted glutarate ligand 1,1-cyclopentanediacetate (cda) afforded [Co(cda)(bpy)]_n (4), and the unsubstituted glutarate (glu) generated [Co(glu)(bpy)]_n (5), both of which exhibit a topology similar to that of 1. The magnetic properties of complexes 1-4 were analyzed successfully with a recently developed phenomenological chain model accounting for both magnetic coupling (J) and zero-field splitting effects (D), even though 1 and 4 contain isolated, discrete {Co₂(CO₂)₂} dimers. The D parameter in this series varied between 21.8(8) and 48.0(9) cm⁻¹. However weak antiferromagnetic coupling was observed in 1 (J=-2.43(4) cm⁻¹) and 4 (J=−0.89(2) cm⁻¹), while weak ferromagnetic coupling appears to be operative in both 2 (J=0.324(5) cm⁻¹) and 3 (J=0.24(1) cm⁻¹).     

The synthesis of oligoether-substituted benzimidazolium bromides and their use as ligand precursors for the Pd-catalyzed Heck coupling in water

The oligoether-substituted (CH₃(OCH₂CH₂)_n-; n = 1, 2 or 3) benzimidazolium bromides (3-7) and oligoether-linked (-CH₂(CH₂OCH₂)_nCH₂-, n = 1, 2 or 3) bisbenzimidazolium dibromides (8-13) were prepared by quarternization of N-substituted benzimidazoles (1 and 2) with the bulky benzyl bromides (ArCH₂Br: Ar = C₆H₂(CH₃)₃-2,4,6 and C₆(CH₃)₅). trans-Bis(carbene) palladium(II) complexes 14 and 15 derived from 4 and 6 were synthesized by using Ag complexes as carbene-transfer agents in dichloromethane at ambient temperature. In addition, the reactions of 4 and 6 with Pd(OAc)₂ and NaBr gave the Pd(II) dimers 16 and 17 which can readily be cleaved by triphenylphosphine to afford the benzannulated monocarbene (NHC) monophosphine Pd(II) complexes [PdBr₂(NHC)(PPh₃)] (18 and 19). All compounds have been fully characterized by using elemental analysis, ¹H, ¹³C and ³¹P NMR spectroscopies. X-ray diffraction studies on single crystals of 19a and 19b confirm the cis square planar geometry. In situ formed complexes from Pd(OAc)₂ and benzimidazolium salts (3-13) and preformed Pd(II) complexes 14, 15, 18 and 19 were tested as catalyst for the Heck coupling reaction in water. The influence of the oligoether and benzyl substituents on N atoms and CH₃-substituents on the 5,6-positions of benzimidazole frame were investigated under the same conditions in the Heck coupling reaction. In situ formed catalysts showed better conversions than the isolated Pd(II) complexes. The length of the oligoether spacer significantly increases the activity. The salts with two benzimidazole moieties connected by an oligoether as the spacer 8-13 showed similar catalytic activities in the Heck coupling reaction with the mono salts 3-7 bearing corresponding oligoethers on the N atom.     

Synthesis, characterizations and crystal structures of di-n-butyltin(IV) complexes with heteroatomic (N, O or S) acid

Two types of di-n-butyltin(IV) complexes {[ⁿBu₂Sn(O₂CR)]₂O}₂ · L 1-4 and ⁿBu₂Sn(O₂CR)₂Y 5-8 (when L=H₂O, R=2-pyrazine 1; L=0, R=2-pyrimidylthiomethylene 2, 1-naphthoxymethylene 3; L=C₆H₆, R=2-naphthoxymethylene 4; when Y=H₂O, R=2-pyrazine 5; Y=0, R=2-pyrimidylthiomethylene 6, 1-naphthoxymethylene 7, 2-naphthoxymethylene 8) have been prepared in 1:1 or 1:2 molar ratios by reactions of di-n-butyltin oxide with the heteroatomic (N, O or S) carboxylic acids. The complexes 1-8 are characterized by elemental, IR, ¹H and ¹³C NMR spectra. And except for complexes 6 and 7, the complexes 1-5 and 8 are also characterized by X-ray crystallography diffraction analyses, which reveal that the tin atom of complex 5 is seven-coordinated, while the complexes 1-4 and 8 are all hexa-coordinated. The nitrogen atom of the aromatic ring in complexes 1 and 5 participates in the interactions with the Sn atom.     

Stereochemistry of the insertion of disubstituted alkynes into the metal aminocarbyne bond in diiron complexes

Terminal alkynes (HCCR^′) (R^′=COOMe, CH₂OH) insert into the metal-carbyne bond of the diiron complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCMe)(Cp)₂][SO₃CF₃] (R=Xyl, 1a; CH₂Ph, 1b; Me, 1c; Xyl=2,6-Me₂C₆H₃), affording the corresponding μ-vinyliminium complexes [Fe₂{μ-σ:η³-C(R^′)CHCN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, R^′=COOMe, 2; R=CH₂Ph, R^′=COOMe, 3; R=Me, R^′=COOMe, 4; R=Xyl, R^′=CH₂OH, 5; R=Me, R^′=CH₂OH, 6). The insertion is regiospecific and C-C bond formation selectively occurs between the carbyne carbon and the CH moiety of the alkyne. Disubstituted alkynes (R^′CCR^′) also insert into the metal-carbyne bond leading to the formation of [Fe₂{μ-σ:η³-C(R^′)C(R^′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R^′=Me, R=Xyl, 8; R^′=Et, R=Xyl, 9; R^′=COOMe, R=Xyl, 10; R^′=COOMe, R=CH₂Ph, 11; R^′=COOMe, R=Me, 12). Complexes 2, 3, 5, 8, 9 and 11, in which the iminium nitrogen is unsymmetrically substituted, give rise to E and/or Z isomers. When iminium substituents are Me and Xyl, the NMR and structural investigations (X-ray structure analysis of 2 and 8) indicate that complexes obtained from terminal alkynes preferentially adopt the E configuration, whereas those derived from internal alkynes are exclusively Z. In complexes 8 and 9, trans and cis isomers have been observed, by NMR spectroscopy, and the structures of trans-8 and cis-8 have been determined by X-ray diffraction studies. Trans to cis isomerization occurs upon heating in THF at reflux temperature. In contrast to the case of HCCR^′, the insertion of 2-hexyne is not regiospecific: both [Fe₂{μ-σ:η³-C(CH₂CH₂CH₃)C(Me)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, 13; R=Me, 15) and [Fe₂{μ-σ:η³-C(Me)C(CH₂CH₂CH₃)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, 14, R=Me, 16) are obtained and these compounds are present in solution as a mixture of cis and trans isomers, with predominance of the former.     

Chiral C1-symmetric 2,2′:6′,2′′-terpyridine ligands: Synthesis,characterization, complexation with copper(II), rhodium(III) and ruthenium(II) ions and use of the complexes in catalytic cyclopropanation of styrene

Three new optically pure C₁-terpyridine ligands (L1–3) were prepared and the copper(II) complexes, of formula [Cu(L)Cl₂], the rhodium(III) complexes, of formula [Rh(L)Cl₃], and the ruthenium(II) complexes, of formula cis- or trans-[Ru(L)(X)Cl₂] (X = DMSO or CO), were synthesized. Structures of a chiral C₁-ligand, a copper complex, a rhodium complex and a ruthenium DMSO complex were analysed using X-ray crystal structure analysis. The copper, rhodium and ruthenium complexes were shown to be precursors of catalysts for cyclopropanation. Reaction of [Cu(L)Cl₂], [Rh(L)Cl₃] or cis- or trans-[Ru(L)(X)Cl₂] with AgOTf converted the complex to catalyst, which in the case of trans-[Ru(L)(CO)Cl₂] gave enantioselectivities of up to 67% ee for the cis-isomers of styrene cyclopropanes with t-butyl diazoacetate. Comparisons with C₂-analog of copper, rhodium and ruthenium catalysts were made.     

Synthesis of tridentate 2,6-bis(imino)pyridyl aminechlorohydro ruthenium(II) complexes: The convenient use of amine hydrochlorides to generate metal-hydride

The reaction of low-valent ruthenium complexes with 2,6-bis(imino)pyridine ligand, [η²-N₃]Ru(η⁶-Ar) (1) or {[N₃]Ru}₂(μ-N₂) (2) with amine hydrochlorides generates six-coordinate chlorohydro ruthenium (II) complexes with amine ligands, [N₃]Ru(H)(Cl)(amine) (4). Either complex 1 or 2 activates amine hydrochlorides 3, and the amines coordinate to the ruthenium center to give complex 4. This is a convenient and useful synthetic approach to form ruthenium complexes with amine and hydride ligands using amine hydrochloride.     

Synthesis of arene ruthenium triazolato complexes by cycloaddition of the corresponding arene ruthenium azido complexes with activated alkynes or with fumaronitrile

The neutral arene ruthenium azido complexes [(η⁶-p-cymene)Ru(LL)(N₃)], [LL = acetylacetonato (acac) (4), benzoylacetonato (bzac) (5) diphenylbenzoyl methane (dbzm) (6)] undergo [3+2] cycloaddition reaction with a series of activated alkynes and fumaronitrile to produce the arene ruthenium triazolato complexes: [(η⁶-p-cymene)Ru(LL){N₃C₂(CO₂R)₂}] [LL = (acac), R = Me (7); LL = (bzac), R = Me (8); LL = (dbzm), R = Me (9); LL = (acac), R = Et (10); LL = (bzac), R = Et (11); LL = (dbzm), R = Et (12) and [(η⁶-p-cymene)Ru(LL)(N₃C₂HCN)]; LL = acac (13), bzac (14); dbzm (15). However, cationic azido complexes, [(η⁶-p-cymene)Ru(dppe)(N₃)]⁺ and [(η⁶-p-cymene)Ru(dppm)(N₃)]⁺ do not undergo such cycloaddition reactions. The complexes were characterized on the basis of microanalyses, FT-IR and NMR spectroscopic data. Crystal structures of representative complexes were determined by single crystal X-ray diffraction.     

Synthesis, characterization, and alkyne cyclotrimerization chemistry of titanium complexes supported by calixarene-derived bis(aryloxide) ligation

Proximally bridged calix[4]arene compounds (DESC)H₂ (3), (DMSHC)H₂ (4), (DMSMC)H₂ (5), and (DPSC)H₂ (6), in which one R₂Si group (R=alkyl or aryl) bridges adjacent oxygens, were synthesized via reaction between dialkyl- or diaryldichlorosilane and the corresponding calix[4]arene. Treatment of p-tert-butylcalix[4]arene with Ph₂SiCl₂ at room temperature or (o-MeC₆H₄)₂SiCl₂ at 80 °C gave (ClPh₂SiCl)₂Calix-H₂ (7) and (o-Tol₂SiCl)₂Calix-H₂ (8), respectively. Titanium dichloride complexes 9-12 (L₂TiCl₂, where L₂=DESC, DMSHC, DMSMC, or DPSC) were prepared in high yield from reaction of 3-6 with TiCl₄. The molecular structures of 7 and 12 were established by single-crystal X-ray diffraction studies. Reduction of 9, 11, and 12 with activated magnesium (Mg*) in the presence of an excess of Me₃SiCCH produced titananorbornadiene complexes L₂Ti{η⁶-1,2,4-C₆H₃(SiMe₃)₃} (13-15, L₂=DESC, DMSMC, or DPSC), which were characterized in solution. Catalytic cyclotrimerization of both terminal and internal alkynes was achieved using catalyst systems derived from L₂TiCl₂ complexes 9-12 and Mg*. For unsymmetrically substituted internal alkynes, preference for 1,2,4-substitution decreased as the size difference of the substituent groups decreased. The cyclotrimerization of PhCCMe was more facile when the calixarene-derived bis(aryloxide) ligand was DPSC versus DMSMC, suggesting that the DPSC ligand may provide a less crowded titanium center and exert greater kinetic control over the course of the cyclotrimerization.     

Novel hydridotris(pyrazolyl)borate ruthenium(II) complexes containing the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane: Synthesis and evaluation of DNA binding properties

A series of half-sandwich ruthenium(II) complexes containing κ³(N,N,N)-hydridotris(pyrazolyl)borate (κ³(N,N,N)-Tp) and the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane (PTA) [RuX{κ³(N,N,N)-Tp}(PPh₃)_2−n(PTA)_n] (n = 2, X = Cl (1), n = 1, X = Cl (2), I (3), NCS (4), H (5)) and [Ru{κ³(N,N,N)-Tp}(PPh₃)(PTA)L][PF₆] (L = NCMe (6), PTA (7)) have been synthesized. Complexes containing 1-methyl-3,5-diaza-1-azonia-7-phosphaadamantane(m-PTA) triflate [RuCl{κ³(N,N,N)-Tp}(m-PTA)₂][CF₃SO₃]₂ (8) and [RuX{κ³(N,N,N)-Tp}(PPh₃)(m-PTA)][CF₃SO₃] (X = Cl (9), H (10)) have been obtained by treatment, respectively, of complexes 1, 2 and 5 with methyl triflate. Single crystal X-ray diffraction analysis for complexes 1, 2 and 4 have been carried out. DNA binding properties by using a mobility shift assay and antimicrobial activity of selected complexes have been evaluated.     

Syntheses, characterization and crystal structures of di- and triorganotin (IV) derivatives with 6-amino-1,3,5-triazine-2,4-dithiol

A series of organotin (IV) complexes with 6-amino-1,3,5-triazine-2,4-dithiol of the type [(R_nSnCl_4−n)₂ (C₃H₂N₄S₂)] (n = 3: R = Me 1, n-Bu 2, PhCH₂3, Ph 4; n = 2: R = Me 5, n-Bu 6, PhCH₂7, Ph 8) have been synthesized. All the complexes 1-8 have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectra. Among them complexes 1, 4, 5 and 8 have also been characterized by X-ray crystallography diffraction analyses, which revealed that the tin atoms of complexes 1, 4, 5 and 8 are all five-coordinated with distorted trigonal bipyramid geometries.     

Synthesis of mono and doubly alkynyl substituted ferrocene and its crystal engineering using -C-H···O supramolecular synthon

Mono and doubly alkynyl substituted ferrocene complexes, [Fc(CH₂OCH₂CCH)_n], 2-3 (2: n = 1; 3: n = 2; Fc = ferrocene) have been synthesized from the room temperature reaction of mono and 1,1′-dihydroxymethyl ferrocene, Fc(CH₂OH)_n , 1a-b (1a: n = 1; 1b: n = 2) and propargyl bromide, in modest to good yields. These new ferrocene derivatives have been characterized by mass, IR, ¹H, ¹³C NMR spectroscopy, and molecular structures of compound 2 and 3 were unequivocally established by single crystal X-ray diffraction study. The crystal structure analysis revealed that 2 and 3 consist of infinite 1D zig-zag hydrogen bonded chains and 2D microporous hydrogen bonded network of molecules, linked by intermolecular C-H···O hydrogen bonding. The molecular structures of both 2 and 3 are further stabilized by C-H···π interactions.     

Synthesis and reactivity of ruthenium complexes with 1,1′-dithiolate ligands

Reactions of [Ru(PPh₃)₃Cl₂] with ROCS₂K in THF at room temperature and at reflux gave the kinetic products trans-[Ru(PPh₃)₂(S₂COR)₂] (R = ⁿPr 1, ⁱPr 2) and the thermodynamic products cis-[Ru(PPh₃)₂(S₂COR)₂] (R = ⁿPr 3, ⁱPr 4), respectively. Treatment of [RuHCl(CO)(PPh₃)₃] with ROCS₂K in THF afforded [RuH(CO)-(S₂COR)(PPh₃)₂] (R = ⁿPr 5, ⁱPr 6) as the sole isolable products. Reaction of [RuCl₂(PPh₃)₃] with tetramethylthiuram disulfide [Me₂NCS₂]₂ gave a Ru(III) dithiocarbamate complex, [Ru(PPh₃)₂(S₂CNMe₂)Cl₂] (7). This reaction involved oxidation of ruthenium(II) to ruthenium(III) by the disulfide group in [Me₂NCS₂]₂. Treatment of 7 with 1 equiv. of [M(MeCN)₄][ClO₄] (M = Cu, Ag) gave the stable cationic ruthenium(III)-alkyl complexes [Ru{C(NMe₂)QC(NMe₂)S}(S₂CNMe₂)(PPh₃)₂][ClO₄] (Q = O 8, S 9) with ruthenium-carbon bonds. The crystal structures of complexes 1, 2, 4·CH₂Cl₂, 6, 7·2CH₂Cl₂, 8, and 9·2CH₂Cl₂ have been determined by single-crystal X-ray diffraction. The ruthenium atom in each of the above complexes adopts a pseudo-octahedral geometry in an electron-rich sulfur coordination environment. The 1,1′-dithiolate ligands bind to ruthenium with bite S-Ru-S angles in the range of 70.14(4)-71.62(4)°. In 4·CH₂Cl₂, the P-Ru-P angle for the mutually cis PPh₃ ligands is 103.13(3)°, the P-Ru-P angles for other complexes with mutually trans PPh₃ ligands are in the range of 169.41(4)-180.00(6)°. The alkylcarbamate [C(NMe₂)QC(NMe₂)S]⁻ (Q = O, S) ligands in 8 and 9 are planar and bind to the ruthenium centers via the sulfur and carbon atoms from the CS and NC double bonds, respectively. The Ru-C bond lengths are 1.975(5) and 2.018(3) Å for 8 and 9·2CH₂Cl₂, respectively, which are typical for ruthenium(III)-alkyl complexes. Spectroscopic properties along with electrochemistry of all complexes are also reported in the paper.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Half-sandwich η-arene–ruthenium(II) complexes bearing 1-alkyl(benzyl)-imidazo[4,5-f][1,10]-phenanthroline (IP) derivatives: the effect of alkyl chain length of ligands to catalytic activity

The reaction of bromoalkanes (R–Br; (3), R=C_nH_2n+1, n=4 (a), 8 (b), 12 (c),18 (d)) and bromobenzyl derivatives (R′–Br; (4), R′=CH₂C₆H₂(CH₃)₃-2,4,6 (a); CH₂C₆H(CH₃)₄-2,3,5,6 (b); CH₂C₆(CH₃)₅ (c)) with 1H-imidazo[4,5-f][1,10]-phenanthroline (IP)(L₂) gave the corresponding 1-R-imidazo[4,5-f][1,10]-phenanthroline (IPR)(L_3a–d) and 1-R′-imidazo[4,5-f][1,10]-phenanthroline(IPR')(L_4a–c) ligands, respectively. Treatment of L_3a–d and L_4a–d with [Ru(p-cymene)Cl₂]₂ led to the formation of [Ru(p-cymene)(IPR)Cl]Cl (RuL_3a–d) and [Ru(p-cymene)(IPR′)Cl]Cl (RuL_4a–c). New ruthenium(II) complexes RuL_3a–d and RuL_4a–c were characterized by elemental analysis, FTIR, UV–visible and NMR spectroscopy. In order to understand effects of these changes on the N-substituent of imidazol on IP and how they translate to catalytic activity, these new RuL₂, RuL_3a–d and RuL_4a–c were applied in the transfer hydrogenation of ketones by 2-propanol in presence of potassium hydroxide. The activities of the catalysts were monitored by NMR and GC analysis.     

Rhodium(I) complexes with κP coordinated ω-phosphinofunctionalized alkyl phenyl sulfide, sulfoxide and sulfone ligands and their reactions with sodium bis(trimethylsilyl)amide and Ag[BF4]

Reactions of ω-diphenylphosphinofunctionalized alkyl phenyl sulfides Ph₂P(CH₂)_nSPh (n = 1, 1a; 2, 2a; 3, 3a), sulfoxides Ph₂P(CH₂)_nS(O)Ph (n = 1, 1b; 2, 2b; 3, 3b) and sulfones Ph₂P(CH₂)_nS(O)₂Ph (n = 1, 1c; 2, 2c; 3, 3c) with dinuclear chlorido bridged rhodium(I) complexes [(RhL₂)₂(μ-Cl)₂] (L₂ = cycloocta-1.5-diene, cod, 4; bis(diphenylphosphino)ethane, dppe, 5) afforded mononuclear Rh(I) complexes of the type [RhCl{Ph₂P(CH₂)_nS(O)_xPh-κP}(cod)]¹ (n/x = 1/0, 6a; 1/1, 6b; 1/2, 6c; 2/0, 8a; 2/1, 8b; 2/2, 8c; 3/0, 10a; 3/1, 10b; 3/2, 10c) and [RhCl{Ph₂P(CH₂)_nS(O)_xPh-κP}(dppe)] (n/x = 1/0, 7a; 1/1, 7b; 1/2, 7c; 2/0, 9a; 2/1, 9b; 2/2, 9c; 3/0, 11a; 3/1, 11b; 3/2, 11c) having the P^S(O)_x ligands κP coordinated. Addition of Ag[BF₄] to complexes 6-11 in CH₂Cl₂ led with precipitation of AgCl to cationic rhodium complexes of the type [Rh{Ph₂P(CH₂)_nS(O)_xPh-κP,κS/O}L₂][BF₄] having bound the P^S(O)_x ligands bidentately in a κP,κS (13a-18a, 15b-18b) or a κP,κO (13b, 14b, 13c-18c) coordination mode. Unexpectedly, the addition of Ag[BF₄] to 6a in THF afforded the trinuclear cationic rhodium(I) complex [Rh₃(μ-Cl)(μ-Ph₂PCH₂SPh-κP:κS)₄][BF₄]₂·4THF (12·4THF) with a four-membered Rh₃Cl ring as basic framework. Addition of sodium bis(trimethylsilyl)amide to complexes 6-11 led to a selective deprotonation of the carbon atom neighbored to the S(O)_x group (α-C) yielding three different types of organorhodium complexes: a) Organorhodium intramolecular coordination compounds of the type [Rh{CH{S(O)_xPh}CH₂CH₂PPh₂-κC,κP}L₂] (22a-c, 23a-c), b) zwitterionic complexes [Rh{Ph₂PCHS(O)_xPh-κP,κS/O}L₂] having κP,κS (21a, 21b) and κP,κO (20b/c, 21c) coordinated anionic [Ph₂PCHS(O)_xPh] ligands, and c) the dinuclear rhodium(I) complex [{Rh{μ-CH(SPh)PPh₂-κC:κP}(cod)}₂] (19). All complexes were fully characterized spectroscopically and complexes 15b, 15c, 12·4THF and 19·THF additionally by X-ray diffraction analysis. DFT calculations of zwitterionic complexes gave insight into the coordination mode of the [Ph₂PCHS(O)Ph] ligand (κP,κS versus κP,κO).     

Metal-organic coordination architectures of azole heterocycle ligands bearing acetic acid groups: Synthesis, structure and magnetic properties

Four new coordination complexes with azole heterocycle ligands bearing acetic acid groups, [Co(L¹)₂]_n (1), [CuL¹N₃]_n (2), [Cu(L²)₂·0.5C₂H₅OH·H₂O]_n (3) and [Co(L²)₂]_n (4) (here, HL¹=1H-imidazole-1-yl-acetic acid, HL²=1H-benzimidazole-1-yl-acetic acid) have been synthesized and structurally characterized. Single-crystal structure analysis shows that 3 and 4 are 2D complexes with 4⁴-sql topologies, while another 2D complex 1 has a (4³)₂(4⁶)-kgd topology. And 2 is a 3D complex composed dinuclear μ_1,1-bridging azido Cu^II entities with distorted rutile topology. The magnetic properties of 1 and 2 have been studied.