Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Alternative synthesis of cystothiazole A

Palladium-catalyzed methoxycarbonylation of (−)-(2R,3S)-1-tert-butyldimethylsiloxy-3-methyl-2-methoxypenta-4-yne 9 derived from (2R,3S)-epoxy butanoate 5 gave the acetylenic ester 10, which was treated with MeOH in the presence of Bu₃P to afford selectively (Z)-β-methoxy acrylate congener 11 in 86% yield. Treatment of (Z)-11 with 99.8% enrichment of CDCl₃ followed by consecutive desilylation and oxidation afforded the left-half aldehyde (+)-2. The overall yield (10 steps from 5; 23%) of (+)-2 via the present route was improved in comparison to that (10 steps from 5; 10%) of the previously reported route. By applying the modified Julia's coupling method, selectivity (E/Z=14:1) of the (E)-form (cystothiazole A 1) against the (Z)-form was improved in comparison to the Wittig method (E/Z=4:1 to 6.9:1).     

Novel synthesis of 3-(3,3,3-trifluoroprop-1-en-2-yl)furans via stereoselective processing and palladium-catalyzed cycloisomerization

The 3,3,3-trifluoroprop-1-en-2-yl-substituted furans (4) were synthesized via palladium-catalyzed cyclization-isomerization of 1,1,1-trifluoro-2-[(tert-butyldimethylsilyloxy)methyl]-3-alkynylbut-2-en-1-ols (3), which were readily obtained from 1,1,1-trifluoro-2-[(tert-butyldimethylsilyloxy)methyl]-3,3-dibromoprop-2-ene (1) in three steps.     

A convenient synthesis of 1′-H-spiro-(indoline-3,4′-piperidine) and its derivatives

A simple synthetic route has been developed to prepare 1′-H-spiro(indoline-3,4′-piperidine) (1d). Dialkylation of 2-fluorophenylacetonitrile with N-(tert-butyloxycarbonyl)-bis(2-chloroethyl)amine (5) gave 6. Deprotection of Boc followed by cyclization resulted 1d in 67% overall yield. Selective Boc or Cbz protection of 1′-N gave 1a or 1b with 90 and 85% yield, respectively. Thus, in a five-step procedure, 1a and 1b were synthesized from commercially available reagents in over 50% overall yield. All 3 compounds (1a, 1b and 1d) can be utilized as templates to synthesize compounds for GPCR targets.     

Efficient and selective synthesis of quinoline derivatives

The bromination reaction of 1,2,3,4-tetrahydroquinoline (7) was investigated by NBS and molecular bromine. One-pot synthesis is described for synthetically valuable 4,6,8-tribromoquinoline (3) and 6,8-dibromo-1,2,3,4-tetrahydroquinoline (6) on bromination of 1,2,3,4-tetrahydroquinoline (7) in efficient yields (75 and 90%, respectively). 6-Bromo- (4) and 6,8-dibromo-1,2,3,4-tetrahydroquinolines (6) were converted to 6-bromo- (1) and 6,8-dibromo quinolines (2), respectively, by aromatization with DDQ in 83 and 77% yields, respectively. Several novel trisubstituted quinoline derivatives were efficiently prepared via lithium-halogen exchange reactions of tribromide 3. Treatment of 4,6,8-tribromoquinoline with BuLi followed by quenching with electrophiles [Si(CH₃)₃Cl, S₂(CH₃)₂, I₂] regioselectively proceeded at C-4 and C-8 sites and afforded corresponding 4,8-disubstituted-6-bromoquinolines. Similarly, lithiation of tribromide 3 followed by addition of water to the intermediate produced 6-bromoquinoline in 65% yield. Copper-induced nucleophilic substitution of tribromide 3 with NaOMe afforded 4,6,8-trimethoxyquinoline (17) in 60% yield.     

Silicon-carbon unsaturated compounds. 77. Thermal behavior of cis- and trans-1-silacyclobut-3-ene formed from pivaloyl[tert-butylbis(trimethylsilyl)]silane and tert-butylacetylene

The reaction of tert-butylbis(trimethylsilyl)silyl potassium with pivaloyl chloride gave pivaloyl[tert-butylbis(trimethylsilyl)]silane (1) in 89% yield. The cothermolysis of 1 with tert-butylacetylene at 140 °C for 24 h produced the mixture consisting of cis- and trans-1,2,3-tri(tert-butyl)-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclobut-3-ene (cis-2 and trans-2) in a ratio of 0.7: 1, in 88% combined yield. The thermolysis of the mixture, cis-2 and trans-2, at 250 °C for 24 h proceeded to give trans-1,2,4-tri(tert-butyl)-1-(trimethylsiloxy)-2-(trimethylsilyl)-1-silacyclobut-3-ene (4) as a single product in 96% yield. Similar treatment of cis- and trans-2 at 190 °C for 15 h afforded silylcyclopropene 3 quantitatively, which underwent further isomerization at 250 °C to give trans-1-silacyclobut-3-ene 4 in quantitative yield.     

Highly efficient, multigram and enantiopure synthesis of (S)-2-(2,4′-bithiazol-2-yl)pyrrolidine

(S)-2-(4-Bromo-2,4′-bithiazole)-1-(tert-butoxycarbonyl)pyrrolidine ((S)-1) was obtained as a single enantiomer and in high yield by means of a two-step modified Hantzsch thiazole synthesis reaction when bromoketone 3 and thioamide (S)-4 were used. Further conversion of (S)-1 into trimethyltin derivative (S)-2 broadens the scope for further cross-coupling reactions.     

First synthesis of polyoxin M

Chiral enolate derived from (4R)-4-tert-butyldiphenylsilyloxymethyl-4-butanolide 10 with lithium hexamethyldisilyazide (LiHMDS) was treated with trisyl azide, followed by addition of TMSCl to give (2S,4R)-2-azido-4-[(tert-butyldiphenylsilyloxy)methyl]-4-butanolide 8 (53%), from which the first total synthesis of polyoxin M (1) was achieved in overall 3.2% yield (13 steps) from d-glutamic acid. Moreover, the synthesis of the reported synthetic intermediate (2S,4R)-4-hydroxyornithine congener 6 for biphenomycins A and B was also achieved in overall 4.1% yield (12 steps) from d-glutamic acid.     

N-Arylmethyl-7-azabicyclo[2.2.1]heptane derivatives: synthesis and reaction mechanisms

N-Arylmethyl-7-azabicyclo[2.2.1]heptane (I) derivatives have been synthesized by deprotection of N-protected, N-(arylmethyl)cyclohex-3-enamines, bromination of the resulting secondary cyclohex-3-enamines, followed by base-promoted cyclization (route a), or by bromination of N-protected, N-(arylmethyl)cyclohex-3-enamines followed by deprotection and base-mediated cyclization (route b). In these protocols we have observed that the bromination of the key intermediates (12, 13, and 19) is stereoselective leading to major trans-3-cis-4-dibromides (14, 17, and 20), whose mild base-mediated heterocyclization (on compound 14), or the two-step acid hydrolysis plus base-promoted cyclization (on compounds 17 and 20), gave products 6 and 7 in good yield. A mechanistic investigation using DFT has been carried out to explain the results observed in this work.     

Dipheno-silyliminoquinones - A 14π-system

Lithium salts of 2.6-dialkylanilines react with di-tert-butylfluorosilanes to give mono (1-3) - and bis (7, 8)-(2.6-dialkylphenylamino)silanes. Amino-2.6-dimethylphenyl-(di-tert-butylfluoro)silane (1) forms with BuLi a dimeric lithium salt (4) containing an eight-membered (LiFNSi)₂ ring system. Thermally, 4 loses LiF and a bicyclic compound (9) via iminosilenes is obtained. The lithium salt of the bulkier amino-2.6-diisopropylphenyl-(di-tert-butylfluorosilanes) (5-7) thermally loses LiH and iminosilanes (10-12) with a 14π-system are isolated. The reaction mechanisms and crystal structures are discussed.     

Temporary thio-derivatization in the synthesis of (+)-4-acetylbromoxone

A stereocontrolled synthesis of the marine natural products (+)-bromoxone (1) and (+)-4-acetylbromoxone (2) is reported. The sequence features the enzymatic kinetic resolution of 4-hydroxycyclohexenone (6) via its S-benzyl adduct. Thereafter, a base-mediated elimination-silylation generated an optically active (−)-4S-4-tert-butyldimethylsilyoxycyclohexenone (5), which then underwent diastereoselective epoxidation. Saegusa-Ito oxidation enabled formation of the corresponding α,β-unsaturated ketone 13. Bromination-elimination and subsequent removal of the silicon protecting group afforded (+)-bromoxone (1) which was converted into (+)-(4S,5R,6R)-4-acetoxy-2-bromo-5,6-epoxycyclohex-2-enone (2) [(+)-4-acetylbromoxone]. Using a luciferase gene reporter assay ED₅₀ for NFκB inhibition of 9 μM was determined.     

Synthetic study toward 17-thiasteroids: synthesis of the 1-thiahydrinden-5-one subunit using a new annulation procedure and investigation of its reduction

The enantioselective syntheses of ketones 6 and 7 featuring the CD subunit of 17-thiasteroid are described. The key bicyclic 1-thiahydrindenone (S)-5 was assembled in three steps from Michael adduct (S)-12 via β-keto ester 15 using a one-pot sequential process involving cleavage of both the ketal group and the tert-butyl ester group, decarboxylation, and finally intramolecular aldol condensation. Hydridoalkyl cuprate-induced conjugate reduction of 1-thiahydrindenone (S)-5 and its corresponding sulfone (S)-23 gave 1-thiahydrindanones 6 and 7, respectively, which display unexpectedly the unnatural cis-ring junctions.     

Polyhydroxylated pyrrolizidines. Part 6: A new and concise stereoselective synthesis of (+)-casuarine and its 6,7-diepi isomer, from DMDP

A new synthesis for (+)-casuarine (1) and its 6,7-diepi isomer (15) in a stereocontrolled manner, is reported herein. An appropriately protected polyhydroxylated pyrrolidine, such as (2R,3R,4R,5R)-3,4-dibenzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine (3, protected DMDP), easily available from d-fructose, was chosen as the chiral starting material. Compounds 1 and 15 were obtained from 3, in seven steps, in a 23.2 and 20.5% overall yields, respectively.     

Stereoselective dioxirane hydroxylations and the synthesis of tripod boronic acid esters

Methyl(trifluoromethyl)dioxirane (TFDO, 1b), a powerful yet selective oxidant, was employed to achieve in high yield the direct stereoselective hydroxylation at tert-CH of cis,cis-1,3,5-trimethylcyclohexane (4), yielding triol 7 bearing all-axial disposition of the three OH groups. Similarly, TFDO oxidation of 1,3- and of 1,4-dimethylcyclohexane gave the corresponding Z-diols 5 and 6, respectively. Triol 7 was a convenient starting material to synthesize a novel borate—that is, 1-bora-2,8,9-trioxa-3,5,7-trimethyladamantane (8)—having a peculiar cage-shaped ‘tripod’ structure. From triol 7, novel tripod arylboronic Brönsted-assisted Lewis acids (BLA) could be obtained, as exemplified by 10a and 10b.     

Ferrocenecarbothioamide and N-ethoxycarbonylferrocenecarbothioamide: Synthesis, structure and application in synthesis of 2,4-diferrocenylthiazole

Ferrocenecarbothioamide (1) and its N-ethoxycarbonyl derivative (2) were synthesised by a Friedel-Crafts type reaction of ferrocene with potassium thiocyanate and ethoxycarbonyl isothiocyanate, respectively, in a strongly acidic medium. The X-ray structure of 1 was determined and shows conjugation between the ferrocene moiety and the thioamido group. Compound 1 reacts with chloroacetylferrocene affording 2,4-diferrocenylthiazole, whose structure was determined by X-ray diffraction and electronic properties studied by cyclic voltammetry.     

Two-directional total synthesis of efomycine M and formal total synthesis of elaiolide

The anti-inflammatory agent efomycine M (1) has been synthesized from macrodilactone 38 and vinyliodide 42 by a two-directional total synthesis in 17 steps over the longest linear sequence with an overall yield of 7%. The C₂-symmetric macrodiolide 38 has been prepared by Yamaguchi macrolactonization of seco-acid 26. The central stereopentad of 1 was obtained by a highly efficient anti-aldol reaction followed by a diastereoselective ketone reduction. Additionally, we have completed a formal total synthesis of elaiolide (3) by converting macrodiolide 37 into Paterson's methylketone 13.     

Stereoselective synthesis of 3-substituted tetrahydroisoquinolines from phthalan and chiral N-sulfinylimines

The reaction of the dianionic intermediate [resulting from the reductive opening of phthalan (1) with lithium] with chiral N-tert-butylsulfinyl aldimines 3 in the presence of ZnMe₂ gives, after hydrolysis, N-tert-butylsulfinyl amino alcohols 4 with high diastereoselectivity. Successive treatment of compounds 4 with hydrogen chloride in methanol, thionyl chloride in chloroform and sodium hydroxide yields 3-substituted tetrahydroisoquinolines 6.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

A concise synthesis of (±)-pseudodeflectusin, an antitumor isochroman derivative isolated from Aspergillus sp.

A novel and concise synthesis of (±)-pseudodeflectusin (1), an antitumor isochroman derivative isolated from the culture broth of Aspergillus pseudodeflectus, was accomplished by starting from 4-(tert-butyldimethylsilyloxy)-1-pentyne (3) and diethyl 3-oxopentanedicarboxylate (5).     

Cyclopalladation of enantiopure oxazolines having the prochiral CMe2 moiety at position 2 of the heterocycle

(R)-4-Ethyl-2-(1,1-dimethylpropyl)-2-oxazoline (1) and (S)-4-tert-butyl-2-(1,1-dimethylbutyl)-2-oxazoline (2) were synthesized in two steps from the corresponding enantiopure amino alcohols and acid chlorides in a total yield of 95% and 72%, respectively. (S)-2-(1-Adamantyl-1-methylethyl)-4-isobutyl-2-oxazoline (3) was obtained from adamantyl bromide and l-leucinol in five steps in a total yield of 82%. Reactions of oxazolines 1–3 with Pd(OAc)₂ in AcOH or CH₂Cl₂ followed by treatment with LiCl afforded the corresponding μ-Cl dimeric cyclopalladated complexes 15, 17, and 20 in good yield. Compounds 15, 17, and 20 reacted with PPh₃ to furnish the corresponding mononuclear complexes 16, 19, and 21. The ³¹P NMR spectra of trans(N,P) adducts 16, 19, and 21 contained signals of two diastereomers in a ratio of ca. 1.3:1.