MeOTf-catalyzed formal [4 + 2] annulations of styrene oxides with alkynes leading to polysubstituted naphthalenes through sequential electrophilic cyclization/ring expansion

MeOTf-catalyzed formal [4 + 2] annulation of styrene oxides with alkynes to afford polysubstituted naphthalenes has been realized, which undergoes sequential electrophilic cyclization/ring expansion. A range of substrates were tolerated in the formation of naphthalene derivatives with high regioselectivity in satisfactory yields. The reaction could also be carried out on gram scale.     

First practical synthesis of 2- or 3-fluoroalkylated indenols via cobalt-catalyzed [2 + 3] carbocyclization of fluorine-containing alkynes and 2-iodoaryl ketones

[2 + 3] Cycloaddition reaction of fluorine-containing alkynes with various 2-iodoaryl ketones in the presence of CoCl₂(dppf) catalyst proceeded very smoothly to give the corresponding 2- or 3-fluoroalkylated indenols in 57–98% yields. These regioisomers could be successfully separated and obtained in a pure form. From X-ray crystallographic and NOESY analyses, major or minor regioisomers were determined as 3- or 2-fluoroalkylated indenols, respectively.     

Measurement and correlation of (liquid + liquid) equilibrium of the azeotrope (cyclohexane + 2-butanone) with different ionic liquids at T = 298.15 K

Experimental densities, speeds of sound, and refractive indices of the binary mixtures of 2-butanone with cyclohexane and OMIM PF₆ (1-methyl-3-octylimidazolium hexafluorophosphate) were determined from T = (293.15 to 303.15) K, since they are necessary to determine the (liquid + liquid) equilibrium. Excess molar volumes, changes of refractive index on mixing, and deviations in isentropic compressibility for the above systems were calculated. Experimental (liquid + liquid) equilibrium of the ternary mixtures {cyclohexane + 2-butanone + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆)} and (cyclohexane + 2-butanone + OMIM PF₆) were carried out to assess the suitability of HMIM PF₆ and OMIM PF₆ as azeotrope breaker of the mixture cyclohexane and 2-butanone. Selectivity and distribution ratio values, derived from the tie lines data, were presented in order to analyze the best separation solvent in a liquid extraction process. Experimental (liquid + liquid) equilibrium data were compared with the correlated values obtained by means of the NRTL and UNIQUAC models.     

Synthesis of new quinuclidine derivatives via Pd-mediated cross-coupling and cross-benzannulation reactions

New functionalized quinuclidines were prepared via palladium-catalyzed addition reactions of terminal alkynes (donors) to internal alkynes (acceptors). The enantiopure terminal alkynes were derivatives of quincoridine and quincorine, two semi-natural Cinchona alkaloids. The processes exhibited high chemoselectivity and excellent diastereoselectivity, the E-enynes being obtained as single products in almost all cases. The synthesis of new tetra and pentasubstituted benzene derivatives in good yields by [2+2+2] benzannulation of the diynes, obtained by the palladium-catalyzed homodimerization of 10,11-didehydro quincoridine and 10,11-didehydro quincorine, with terminal alkynes and in fair yield by [4+2] benzannulation of an enyne derivative of 10,11-didehydro quincoridine with 2,4-hexane-diyne are reported.     

Lewis acid-catalyzed benzannulation via unprecedented [4+2] cycloaddition of o-alkynyl(oxo)benzenes and enynals with alkynes

The reaction of o-alkynyl(oxo)benzenes 1 with alkynes 2 in the presence of a catalytic amount of AuCl(3) in (CH(2)Cl)(2) at 80 degrees C gave the [4+2] benzannulation products, naphthyl ketone derivatives 3 and 4, in high yields. When the reaction was carried out using AuBr(3) instead of AuCl(3), the reaction speed was enhanced and the chemical yield was increased. On the other hand, when the reaction was carried out in the presence of a catalytic amount of Cu(OTf)(2) and 1 equiv of a Br?nsted acid, such as CF(2)HCO(2)H, in (CH(2)Cl)(2) at 100 degrees C, the decarbonylated naphthalene products 5 were obtained in high yields. Similarly, the Cu(OTf)(2)-H(2)O-promoted reaction of the enynals 7 with an alkyne 2 afforded the corresponding [4+2] benzannulation products, decarbonylated benzene derivatives 8, in good yields. Both AuX(3)- and Cu(OTf)(2)-catalyzed benzannulations proceed most probably through the formation of the benzo[c]pyrylium ate complex 10, the Diels-Alder addition of alkynes 2 to the ate complex, and the resulting bicyclic pyrylium ion intermediate 12. The mechanistic difference between the AuX(3) and Cu(OTf)(2)-HA system is discussed.     

Preparation and characterization of lithium ion-conducting glass-ceramics in the Li1 + xCrxGe2 − x(PO4)3 system

Li₂O–Cr₂O₃–GeO₂–P₂O₅ based glasses were synthesized by a conventional melt-quenching method and successfully converted into glass-ceramics through heat treatment. Experimental results of DTA, XRD, ac impedance techniques and FESEM indicated that Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics treated at 900 °C for 12 h in the Li_1 + xCr_xGe_2 − x(PO₄)₃ (x = 0–0.8) system exhibited the best glass stability against crystallization and the highest ambient conductivity value of 6.81 × 10⁻⁴ S/cm with an activation energy as low as 26.9 kJ/mol. In addition, the Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics displayed good chemical stability against lithium metal at room temperature. The good thermal and chemical stability, excellent conducting property, easy preparation and low cost make it promising to be used as solid-state electrolytes for all-solid-state lithium batteries.     

A quantum chemical study of the haptotropic rearrangements of Cr(CO)(3) on naphthalene and phenanthrene systems

First-principles gradient-corrected density functional theory electronic structure calculations of the haptotropic rearrangement of a Cr(CO)(3) unit on naphthalene and phenanthrene derivatives are reported. Coupled-cluster calibration studies of Cr(CO)(3) complexes with benzene and naphthalene derivatives confirm the accuracy of the applied Becke exchange and Perdew correlation functionals. Characteristic points on the energy hypersurface (reactants, products, intermediates, and transition states) were located for various substituents on the aromatic skeleton. It is argued that a -OH/-O(-) substituent may provide a means to steer the haptotropic shift depending on the pH value, i.e., to construct a molecular switch. In addition, the mechanism of the [3 + 2 + 1] benzannulation of chromium pentacarbonyl naphthylcarbene complexes with alkynes was investigated, and the preference of the angular benzannulation leading to phenanthrene complexes of Cr(CO)(3) over the linear benzannulation leading to corresponding anthracene complexes is explained.     

Preparation of Ag‐doped g‐C3N4 Nano Sheet Decorated Magnetic γ‐Fe2O3@SiO2 Core–Shell Hollow Spheres through a Novel Hydrothermal Procedure: Investigation of the Catalytic activity for A3, KA2 Coupling Reactions and [3 + 2] Cycloaddition

Taking advantageous of both g‐C₃N₄ and magnetic core‐shell hollow spheres, for the first time a heterogeneous and magnetically separable hybrid system was prepared through a novel and simple hydrothermal procedure and used for immobilization of bio‐synthesized Ag(0) nanoparticles. The hybrid system was fully characterized by using SEM/EDS, FTIR, VSM, TEM, XRD, TGA, DTGA, ICP‐AES, BET and elemental mapping analysis. The catalytic utility of the obtained system, h‐Fe₂O₃@SiO₂/g‐C₃N₄/Ag, for promoting ultrasonic‐assisted A³, KA² coupling reactions and [3 + 2] cycloaddition has been confirmed. The results established that the catalyst could efficiently catalyze the reaction to afford the corresponding products in high yields in short reaction times. The reusability study confirmed that the catalyst could be recovered and reused for at least five reaction runs with only slight loss of the catalytic activity. The hot filtration test also proved low silver leaching, indicating the heterogeneous nature of the catalysis.     

Mixing and decomposition behavior of {[4bmpy][Tf2N] + [emim][EtSO4]} and {[4bmpy][Tf2N] + [emim][TFES]} ionic liquid mixtures

Mixing ionic liquids (ILs) has been revealed as a useful way to finely tune the properties of IL-based solvents. The scarce available studies on IL mixtures have shown a quasi-ideal behavior of their physical properties. In this work, we have performed a thermophysical characterization of two binary IL mixtures, namely {4-methyl-N-butylpyridinium bis(trifluoromethylsulfonyl)imide ([4bmpy][Tf₂N]) + 1-ethyl-3-methylimidazolium ethylsulfate ([emim][EtSO₄])} and {[4bmpy][Tf₂N] + 1-ethyl-3-methylimidazolium 1,1,2,2-tetrafluoroethanesulfonate [emim][TFES]}. Both binary IL mixtures have been recently proposed as promising solvents in the (liquid + liquid) extraction of aromatic hydrocarbons from mixtures with alkanes. Densities, viscosities, refractive indices, thermal stability, and specific heats of the {[4bmpy][Tf₂N] + [emim][EtSO₄]} and {[4bmpy][Tf₂N] + [emim][TFES]} IL mixtures have been measured as a function of both temperature and composition. Dynamic viscosities, refractive indices, and thermal stability of the {[4bmpy][Tf₂N] + [emim][EtSO₄]} mixture have exhibited strong deviations from the ideality, in contrast with the quasi-ideal properties of the {[4bmpy][Tf₂N] + [emim][TFES]} mixture and the behavior of the imidazolium and pyridinium-based IL mixtures studied hitherto. The reliability of predictive methods of the thermophysical properties of the mixtures has also been evaluated.     

Electronic spectra of the linear magnesium-containing carbon chains MgC2nH (n = 1–5): A CASPT2 study

Complete active space self-consistent-field (CASSCF) approach has been used for the geometry optimization of the X²Σ⁺ and A²Π electronic states for the linear magnesium-containing carbon chains MgC_2nH (n = 1–5). Multireference second-order perturbation theory (CASPT2) has been used to calculate the vertical excitation energies from the ground to selected seven excited states, as well as the potential energy curves of two ²Σ⁺ and two ²Π electronic states. The studies indicate that the vertical excitation energies of the A²Π ← X²Σ⁺ transition for MgC_2nH (n = 1–5) are 2.837, 2.793, 2.767, 2.714, and 2.669 eV, respectively, showing remarkable linear size dependence. Compared with the previous TD-DFT and RCCSD(T) results, our estimates for MgC_2nH (n = 1–3) are in the best agreement with the available observed data of 2.83, 2.78, and 2.74 eV, respectively. In addition, the dissociation energies in MgC_2nH (n = 1–5) are also been evaluated.     

Ruthenium-catalyzed formal [4 + 2] cycloaddition of alkynes with alkenes: formation of cyclohexenedicarboxylates via isomerization of alkynes and successive Diels-Alder reaction

Formal [4 + 2] cycloaddition of alkynes with electron-deficient alkenes, which affords 3,6-dialkyl-4-cyclohexene-1,2-dicarboxylates, was achieved using Ru(η⁶-1,3,5-cyclooctatriene)(η²-dimethyl fumarate)₂ as a catalyst. The reaction mechanism consists of two steps, isomerization of an alkyne to conjugated dienes and successive Diels-Alder reaction of the generated dienes with an electron-deficient alkene.     

Experimental determination of the rate constants of the reactions of HO2 + DO2 and DO2 + DO2

The rate constants of the reactions of DO₂ + HO₂ (R1) and DO₂ + DO₂ (R2) have been determined by the simultaneous, selective, and quantitative measurement of HO₂ and DO₂ by continuous wave cavity ring-down spectroscopy (cw-CRDS) in the near infrared, coupled to a radical generation by laser photolysis. HO₂ was generated by photolyzing Cl₂ in the presence of CH₃OH and O₂. Low concentrations of DO₂ were generated simultaneously by adding low concentrations of D₂O to the reaction mixture, leading through isotopic exchange on tubing and reactor walls to formation of low concentrations of CH₃OD and thus formation of DO₂. Excess DO₂ was generated by photolyzing Cl₂ in the presence of CD₃OD and O₂, small concentrations of HO₂ were always generated simultaneously by isotopic exchange between CD₃OD and residual H₂O. The rate constant k₁ at 295 K was found to be pressure independent in the range 25–200 Torr helium, but increased with increasing D₂O concentration k₁ = (1.67 ± 0.03) × 10⁻¹² × (1 + (8.2 ± 1.6) × 10⁻¹⁸ cm³ × [D₂O] cm⁻³) cm³ s⁻¹. The rate constant for the DO₂ self-reaction k₂ has been measured under excess DO₂ concentration, and the DO₂ concentration has been determined by fitting the HO₂ decays, now governed by their reaction with DO₂, to the rate constant k₁. A rate constant with insignificant pressure dependence was found: k₂ = (4.1 ± 0.6) × 10⁻¹³ (1 + (2 ± 2) × 10⁻²⁰ cm³ × [He] cm⁻³) cm³ s⁻¹ as well as an increase of k₂ with increasing D₂O concentration was observed: k₂ = (4.14 ± 0.02) × 10⁻¹³ × (1 + (6.5 ± 1.3) × 10⁻¹⁸ cm³ × [D₂O] cm⁻³) cm³ s⁻¹. The result for k₂ is in excellent agreement with literature values, whereas this is the first determination of k₁.     

A new generation of cyanide ion-selective membranes for flow injection application: Part III. A simple approach to the determination of toxic metal-cyanide complexes without preliminary separation

A new flow injection approach to total weak acid-dissociable (WAD) metal–cyanide complexes is proposed, which eliminates the need of a separation step (such as gas diffusion or pervaporation) prior to the detection. The cornerstone of the new methodology is based on the highly selective flow-injection potentiometric detection (FIPD) system that makes use of thin-layer electroplated silver chalcogenide ion-selective membranes of non-trivial composition and surface morphology: Ag_2 + δSe_1 − xTe_x and Ag_2 + δSe. An inherent feature of the FIP-detectors is their specific response to the sum of simple CN⁻ + Zn(CN)₄²⁻ + Cd(CN)₄²⁻. For total WAD cyanide determination, ligand exchange (LE) and a newly developed electrochemical pre-treatment procedure for release of the bound cyanide were used. The LE pre-treatment ensures complete recovery only when the sample does not contain Hg(CN)₄²⁻. This limitation is overcome by implementing electrochemical pre-treatment which liberates completely the bound WAD cyanide through cathodic reduction of the complexed metal ions. A complete recovery of toxic WAD cyanide is achieved in the concentration range from 156 μg L⁻¹ up to 13 mg L⁻¹. A three-step protocol for individual and group WAD cyanide speciation is proposed for the first time. The speciation protocol comprises three successive measurements: (i) of non-treated, (ii) LE-exchange pre-treated; (iii) electrochemically pre-treated sample. In the presence of all WAD complexes this procedure provides complete recovery of the total bound cyanide along with its quantitative differentiation into the following groups: (1) Hg(CN)₄²⁻; (2) CN⁻ + Cd(CN)₄²⁻ + Zn(CN)₄²⁻; (3) Cu(CN)₄³⁻ + Ni(CN)₄²⁻ + Ag(CN)₂⁻. The presence of a 100-fold excess in total of the following ions: CO₃²⁻, SCN⁻, NH₄⁺, SO₄²⁻ and Cl⁻ does not interferes. Thus the proposed approach offers a step ahead to meeting the ever increasing demand for cyanide-species-specific methods. The equipment simplicity makes the procedure a good candidate for implementing in portable devices for in-field cyanide monitoring.     

Hydralazine derivative of aldehyde: A new type of [M − H]+ ion formed in electrospray ionization mass spectrometry

Hydralazine has been widely employed in the development of drugs, derivatization reagents, and ligands. In the present work, we reported a new type of dehydrogenated ion [M ? H]⁺ that was produced from the hydralazine derivative of hexanal in electrospray ionization mass spectrometry (ESI‐MS). The formation of [M ? H]⁺ ions in the ESI‐MS was found to be independent on the mobile phase composition of the liquid chromatography and ESI source parameters. A series of hydralazine derivatives of aldehyde were investigated to confirm this phenomenon. The results showed that hydralazine derivatives of aldehydes that contained an sp³ hybridization carbon with a hydrogen at the α‐position of aldehydes could form the unexpected [M ? H]⁺ ions, whereas hydralazine derivative of acetone could only generate [M + H]⁺ ion in the ESI‐MS. We proposed the possible formation mechanism of [M ? H]⁺ ion for the hydralazine derivatives of aldehydes: the [M ? H]⁺ ion was possibly formed by the loss a hydrogen molecule (H₂) from the protonated ion [M + H]⁺. The results obtained from density functional theory (DFT) calculations supported this proposed formation mechanism of [M ? H]⁺ ion.     

Iron (III)‐porphyrin Complex FeTSPP as an efficient catalyst for synthesis of tetrazole derivatives via [2 + 3]cycloaddition reaction in aqueous medium

The metal complex (5,10,15,20‐tetrakis‐(4‐sulfonatophenyl)‐porphyrin‐iron (III) chloride (FeTSPP) was new employed in an environmentally benign protocol as an efficient catalyst for a “click” chemistry approach for the synthesis of tetrazole and guanindinyltetrazole derivatives via [2 + 3] cycloaddition reaction of nitriles and azide derivatives in aqueous medium. The synthesized compounds were obtained in excellent yield, short reaction times and a recoverable catalyst.     

Synthesis of aminoisoquinolines via Rh-catalyzed [4 + 2] annulation of benzamidamides with vinylene carbonate

A new strategy is developed for the synthesis of 1-aminoisoquinoline derivatives. This Rh(III)-catalyzed [4 + 2] annulation reaction employs benzamidines as efficient directing groups and the vinylene carbonate as an acetylene surrogate. Additionally, the reaction features broad substrate scopes and good yields, only producing carbonate anion as byproduct.     

A stereo-controlled route to conjugated E-enediynes

3-Ene-1, 5-diynes are important components of many enediyne antitumor agents and luminescent materials. A stereo-controlled approach to the synthesis of E-enediynes was developed, and it consists of the following two steps: (1) a mild and economical synthesis of dihalo vinyl derivatives via addition of CuBr₂ to alkynes; (2) the Sonogashira coupling reaction of the dihalo vinyl derivatives with terminal alkynes to form conjugated enediynes. Translated from Chinese Journal of Organic Chemistry, 2006, 26(12): 1682–1685 [译自: 有机化学]     

Radiation-induced darkening of ionic liquid [C4mim][NTf2] and its decoloration

The radiation effect on a hydrophobic room-temperature ionic liquid (RTIL), 1-butyl-3-methyl-imidazolium bis[(trifluoromethyl)sulfonyl]imide ([C₄mim][NTf₂]), was studied by γ-irradiation under nitrogen atmosphere. Accompanied by color darkening and increase of light absorbance in a wide wavelength range, a distinct absorption peak at around 290 nm for irradiated [C₄mim][NTf₂] appeared when acetonitrile was used as solvent, and the intensity of the peak enhanced with increasing dose. The spectrophotometric study on the irradiated RTILs containing 1,3-dialkylimidazolium cations associated with different inorganic anions revealed that the peak is ascribed to the radiolysis products of the [C₄mim]⁺. And the wavelength of the peak was affected by alkyl chain length on imidazolium cation, while the intensity of the peak was influenced by anions. With incorporating a little amounts of oxidants, such as KMnO₄ and HNO₃ into irradiated [C₄mim][NTf₂], the intensity of the peak at 290 nm decreased obviously and the decoloration of [C₄mim][NTf₂] occurred, suggesting that the peak at 290 nm is assigned to the colored species and the species can be oxidized.     

RhCl3/amine-catalyzed [2+2+2] cyclization of alkynes

The RhCl₃·3H₂O/i-Pr₂NEt-catalyzed [2+2+2] cyclotrimerization of alkynes has been achieved. The reaction can be widely used for various alkynes and provides tri- or hexa-substituted benzenes regioselectively in high yields. The [2+2+2] cycloaddition of diynes and alkynes is also developed, and it affords benzene derivatives in moderate to high yields.     

Theoretical study on the reaction mechanisms of CH2SH + NO reaction

The mechanisms for the CH₂SH + NO reaction were investigated on both of the singlet and triplet PES at the BMC-CCSD//B3LYP/6-311+G(d,p) level. The results indicate that the singlet PES is much lower than the triplet PES energetically; therefore, the reaction occurs on the singlet PES dominantly. The most favorable channel on the singlet PES takes place by a barrierless addition of N atom to CH₂SH radical to form HSCH₂NO. Subsequently, the rearrangement of the initial adduct HSCH₂NO (IM1) to form another intermediate IM3 via a four-center transition state, followed by the C–O bond fission in IM3 leading to the major product CH₂S + HNO. Due to high barriers, other product including HC(N)SH + HO, HON + CH₂S, and HNO + CHSH could be negligible. The direct abstraction channel was also determined to yield CH₂S + HON. With high barrier (33.3 kcal/mol), it is not competitive with the addition channel, in which all stationary points are lower than reactant energetically. While on the triplet PES, with the lowest barrier height (18.8 kcal/mol), the direct N-abstracted channel to form CH₂S + HNO is dominant. However, it is not competitive with the channels on the singlet PES. Our results are in good accordance with experimental conclusions that the reaction proceeds via addition mechanism.