Synthesis and X-ray crystallographic structures of [HGa(NMe2)2]2 and [PhGa(NHNMe2)2]2, and room-temperature conversions of [HGa(NMe2)2]2 to (HGaNH)n and (HGaNMe)n

The reactivity of bis(dimethylamido) complexes of phenyl- and hydridogallium with ammonia, dimethylamine and 1,1-dimethylhydrazine is described. Synthesis of the starting gallium hydride, [HGa(NMe₂)₂]₂, was achieved in nearly quantitative yield from the reaction of HGaCl₂(quinuclidine) with LiNMe₂. In neat ammonia or methylamine at room temperature both dimethylamido ligands in [HGa(NMe₂)₂]₂ were substituted by a single equivalent of NH₃ or MeNH₂ to produce amorphous (HGaNH)_n or (HGaNMe)_n, respectively. In contrast, the reaction of [PhGa(NMe₂)₂]₂ with neat Me₂NNH₂, at room temperature consumed two equivalents of the substituted hydrazine to form [PhGa(NHNMe₂)₂]₂ in a 73% yield. Single crystal X-ray crystallographic analyses of [HGa(NMe₂)₂]₂ and [PhGa(NHNMe₂)₂]₂ establish that in the solid state both compounds adopt a cyclic Ga-N-Ga-N structure with a crystallographic center of symmetry located at the center of the ring.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Synthesis and characterization of a new layered gallium phosphate [Co(en)3][Ga3(H2PO4)6(HPO4)3] templated by cobalt complex

A new layered gallium phosphate [Co(en)₃][Ga₃(H₂PO₄)₆(HPO₄)₃], denoted as GaPO-CJ14, has been synthesized solvothermally by using a racemic mix of chiral metal complex Co(en)₃Cl₃ as a template. Its structure was determined by single-crystal X-ray diffraction analysis and further characterized by X-ray powder diffraction, ICP, and TG analyses. The compound crystallizes in the monoclinic space group P2₁/m (No. 11) with a=9.2103(3), b=22.0936(8), c=9.5458(4) Å, β=108.278(2)°, Z=2, R₁=0.0497 and wR₂=0.1122 for all data. The inorganic layer is built up by alternation of Ga-centered octahedra (GaO₆) and P-centered tetrahedra (PO₃(OH), PO₂(OH)₂ , PO₂(O)(OH) and PO(O)(OH)₂) forming a 4.12-net. The sheet structure is featured by a series of structural units composed of two centrosymmetrically related [3.3.3] propellane-like chiral motifs. The metal complex cations locate in the interlayer region and interact with the host network through H-bonds.     

Organometallic compounds of Group 13 elements containing the ligand C(SiMe3)2(SiMe2C5H4N-2)

The lithium derivative (1) reacted with AlCl₃ or Me₂AlCl to give, respectively, the monomeric compounds (2a) and (2b). The product from reaction with commercially available GaBr₃ was the analytically pure monomeric heterocycle (3), indicating that the starting halide had been partially hydrolysed before use. The reaction between 1 and commercially available InCl₃ gave a homogenous white solid (4) with X = Cl (59%) or OH (41%). The X-ray crystal structures of 2a, 3, and 4 have been determined.     

Synthesis, Crystal Structure and Reactivity of Mo4O6(O2)2(μ3-O)2{(μ2-O,μ3-OC8H14}2(OPMePh2)2: A Self-assembled Tetranuclear Cluster Containing Two Peroxide and Two Trans-Cyclooctanediol Ligands*

The reaction of MoO₂Cl₂(OPMePh₂)₂ with t-butylhydroperoxide (TBHP) in the presence of cis-cyclooctene yields the tetrameric complex Mo₄O₆(O₂)₂(μ₃-O)₂{(μ₂-O,μ₃-OC₈H₁₄}₂(OPMePh₂)₂, (1). Additionally in the absence of cis-cyclooctene MoO(O₂)Cl₂(OPMePh₂)₂, MoO(O₂)₂(H₂O)(OPMePh₂), (2), and two novel yellow compounds can be isolated depending on the quantity of TBHP used and the reaction conditions. Both the starting material MoO₂Cl₂(OPMePh₂)₂ and tetramer 1 are capable of accomplishing the epoxidation of cis-cyclooctene as catalysts. The single crystal X-ray determined structures of complexes 1 and 2 are reported.Dedicated to Professor F. A. “Chief” Cotton on the occasion of his 75th birthday     

Structural study of Mn2(CO)8[P(NMe2)3]2

An X-ray crystal structure determination for the bimetallic complex Mn₂(CO)₈-[P(NMe₂)₃]₂ reveals that the P(NMe₂)₃ ligands are trans to the Mn---Mn bond and the Mn---Mn bond distance is relatively long, 2.946(1) Å.     

The reactivity of dimethylaluminum hydride with the aminoarsines Me2AsNMe2, MeAs(NMe2)2, and As(NMe2)3

The reactions of (Me₂AlH)₃ with Me₂AsNMe₂, MeAs(NMe₂)₂, and As(NMe₂)₃ were investigated as a function of time at room temperature and over the temperature range −90 to 24°C by use of ¹H and ¹³C NMR spectroscopy. (Me₂AlH)₃ was found to be very reactive toward the aminoarsines, even at −90°C, and no stable Me₂AlH-aminoarsine adducts were observed. Instead, the initial stages of the reactions involved AS---N bond cleavage with the generation of highly reactive AlN- and AsH-bonded species. The subsequent course of each reaction and the final arsenic-containing product distribution depended upon the original AL:N stoichiometric ratio and the respective aminoarsine. When the Al:N ratio was 1:1, the reactions were straightforward for each aminoarsine. However, in every case, [Me₂AlNMe₂]₂ was the final AlN-containing product. Independent reactions were carried out to verify many of the proposed decomposition pathways that lead to thermodynamically stable products. The results of this study are compared with those of the analogous, previously reported (Me₃Al)₂-aminoarsine systems. Additionally, a new synthetic route to [Me₂AlAsMe₂]₃ has been established from the reaction of (Me₂AlH)₃ with Me₂AsH.     

Synthesis and structure of the edge-bridged open zirconocene, Zr(6,6-dmch)2(PMe3)2 (dmch=dimethylcyclohexadienyl), and its imine coupling product

The reaction of ZrCl₄ with four equivalents of the 6,6-dimethylcyclohexadienyl anion (6,6-dmch⁻) in the presence of PMe₃ leads to the 18 electron Zr(6,6-dmch)₂(PMe₃)₂. This complex was found to undergo a coupling reaction with two equivalents of PhCHNPh, such that the couplings involved the two termini of the same dienyl ligand, yielding a formal Zr(η⁵-dienyl)(η³-allyl)(π-amide)₂ complex. Both metal complexes have been structurally characterized.     

Preparation of Nafion/PTFE/Zr(HPO4)2 composite membranes by direct impregnation method

The viscosities of as received 5.1 wt.% Nafion solutions (EW = 1100, Du Pont Co) blended with various concentrations of ZrOCl₂ were studied. We show the solution viscosity decreases as the wt. ratio of [ZrOCl₂]/[Nafion] is increased from 0.0 to 0.03, then the viscosity does not change significantly as the wt. ratio of [ZrOCl₂]/[Nafion] is increased from 0.03 to 0.16, and then the viscosity increases dramatically as the wt. ratio of [ZrOCl₂]/[Nafion] is increased above 0.16. Four Nafion solutions consisting of 5.1 wt.% Nafion and ZrOCl₂ with [ZrOCl₂]/[Nafion] wt. ratios of 0.019–0.24 were used with porous poly(tetrafluoroethylene) (PTFE) film to prepare zirconium hydrogenphosphate (ZrP) hybridized Nafion/PTFE (NF–ZrP) composite membranes by direct impregnating porous PTFE in Nafion/ZrOCl₂ solutions. The influence of [ZrOCl₂]/[Nafion] wt. ratio of Nafion/ZrOCl₂ solution on the membrane morphology of NF–ZrP and polyelectrolyte membrane fuel cell (PEMFC) performance at temperatures of 110–130 °C with relative humidity of 51.7–28.8% RH was investigated.     

Synthesis and characterization of new sulfide aggregates of the type [{Pt2(μ3-S)2(P-P)2}M(C6F5)2] (M=Ni, Pd, Pt; P-P=2PPh3, 2PMe2Ph, dppf)

The reaction of [Pt₂(μ-S)₂(P-P)₂] (P-P=2PPh₃, 2PMe₂Ph, dppf) [dppf=1,1^′-bis(diphenylphosphino)ferrocene] with cis-[M(C₆F₅)₂(PhCN)₂] (M=Ni, Pd) or cis-[Pt(C₆F₅)₂(THF)₂] (THF=tetrahydrofuran) afforded sulfide aggregates of the type [{Pt₂(μ₃-S)₂(P-P)₂}M(C₆F₅)₂] (M=Ni, Pd, Pt). X-ray crystal analysis revealed that [{Pt₂(μ₃-S)₂(dppf)₂}Pd(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Ni(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Pd(C₆F₅)₂] and [{Pt₂(μ₃-S)₂(PMe₂Ph)₂}Pt(C₆F₅)₂] have triangular M₃S₂ core structures capped on both sides by μ₃-sulfido ligands. The structural features of these polymetallic complexes are described. Some of them display short metal-metal contacts.     

A one-dimensional zirconium hydroxyfluoride, [Zr(OH)2F3][enH]

The first example of a unidimensional zirconium hydroxide fluoride was synthesized under mild solvothermal treatment and characterized by X-ray diffraction and thermal techniques. Monoprotonated ethylenediamine cations reside between the anionic chains. Crystal data for this material are as follows: [C₂N₂H₉][Zr(OH)₂F₃], M=243.35, orthorhombic, space group Pca2₁, a=6.8016(13), b=6.1393(12), , , , Z=4, , μ(Mo-Kα)=1.777 mm⁻¹, . The material transforms to an unknown layered material at ∼175 °C, a common occurrence for 1D structures where the chains are arranged in hydrogen-bonded layers and separated by interlayer organoammoniums. Collapse to the known condensed mineral phase Zr(FO)_2.7 occurs at ca. 275 °C before finally transforming to the baddeleyite form of ZrO₂ at ca. 460 °C.     

Efficient UV-emitting X-ray phosphors: octahedral Zr(PO4)6 luminescence centers in potassium hafnium–zirconium phosphates K2Hf1−xZrx(PO4)2 and KHf2(1−x)Zr2x(PO4)3

Potassium hafnium–zirconium phosphates, K₂Hf_1−xZr_x(PO₄)₂ and KHf_2(1−x)Zr_2x(PO₄)₃, are broad-band UV-emitting phosphors. At room temperature, they have emission peak maxima at approximately 322 and 305 nm, respectively, under 30 kV peak molybdenum X-ray excitation. Both phosphors demonstrate luminescence efficiencies that make them up to 60% as bright as commercially available CaWO₄ Hi-Plus. The solid-state and flux synthesis conditions, and X-ray excited UV luminescence of these two phosphors are discussed. Even though the two compounds have different atomic structures, they contain zirconium in the same active luminescence environment as that found in highly efficient UV-emitting BaHf_1−xZr_x(PO₄)₂. All the three materials have hafnium and zirconium in octahedral coordination via oxygen-atom corner sharing with six separate PO₄ tetrahedra. This octahedral Zr(PO₄)₆ moiety appears to be an important structural element for efficient X-ray excited luminescence, as are the edge-sharing octahedral TaO₆ chains for tantalate emission.     

Tuning the sulfur-heterometal interaction in organolead(IV) complexes of [Pt2(μ-S)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with Ph₃PbCl, Ph₂PbI₂, Ph₂PbBr₂ and Me₃PbOAc result in the formation of bright yellow to orange solutions containing the cations [Pt₂(μ-S)₂(PPh₃)₄PbR₃]⁺ (R₃ = Ph₃, Ph₂I, Ph₂Br, Me₃) isolated as PF₆⁻ or BPh₄⁻ salts. In the case of the Me₃Pb and Et₃Pb systems, a prolonged reaction time results in formation of the alkylated species [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = Me, Et). X-ray structure determinations on [Pt₂(μ-S)₂(PPh₃)₄PbMe₃]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PbPh₂I]PF₆ have been carried out, revealing different coordination modes. In the Me₃Pb complex, the (four-coordinate) lead atom binds to a single sulfur atom, while in the Ph₂PbI adduct coordination of both sulfurs results in a five-coordinate lead centre. These differences are related to the electron density on the lead centre, and indicate that the interaction of the heterometal centre with the {Pt₂S₂} metalloligand core can be tuned by variation of the heteroatom substituents. The species [Pt₂(μ-S)₂(PPh₃)₄PbR₃]⁺ display differing fragmentation pathways in their ESI mass spectra, following initial loss of PPh₃ in all cases; for R = Ph, loss of PbPh₂ occurs, yielding [Pt₂(μ-S)₂(PPh₃)₃Ph]⁺, while for R = Me, reductive elimination of ethane gives [Pt₂(μ-S)₂(PPh₃)₃PbMe]⁺, which is followed by loss of CH₄.     

Ba3 (VO4)2-K2 Ba(MoO4)2 and Pb3 (VO4)2-K2 Pb(MoO4)2 systems

Phase equilibria in the Ba₃(VO₄)₂-K₂Ba(MoO₄)₂ and Pb3(VO₄)₂-K₂Pb(MoO₄)₂ systems have been investigated. In the first system, a continuous series of substitutional solid solutions with the palmierite structure is formed, and in the second one, the polymorphic transition in lead orthovanadate at 100°C restricts the extent of the palmierite-type solid solution to 10–100 mol % K₂Pb(MoO₄)₂. Original Russian Text ? V.D. Zhuravlev, Yu.A. Velikodnyi, A.S. Vinogradova-Zhabrova, A.P. Tyutyunnik, V.G. Zubkov, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 10, pp. 1746–1748.     

New octahedral Ta(V) hydrazido-substituted compounds for atomic layer deposition: Syntheses,X-ray diffraction structures of TaCl(NMe2)3[N(TMS)NMe2] and Ta(NMe2)4[N(TMS)NMe2], and fluxional behavior of the amido and hydrazido ligands in solution

The synthesis and structural characterization of new tantalum(V) compounds containing a single hydrazido(I) ligand are reported. Hydrazinolysis of TaCl(NMe₂)₄ using trimethylsilyl(dimethyl)hydrazine affords the compound TaCl(NMe₂)₃[N(TMS)NMe₂] in essentially quantitative yield. Metathetical replacement of the chloride ligand in TaCl(NMe₂)₃[N(TMS)NMe₂] by LiNMe₂ gives the all-nitrogen coordinated compound Ta(NMe₂)₄[N(TMS)NMe₂]. VT ¹H NMR studies support the existence of low-energy pathways involving rotation about the Ta–N bonds of the ancillary amido and hydrazido ligands in both hydrazido-substituted compounds. X-ray crystallographic analyses confirm the octahedral disposition about the tantalum metal in TaCl(NMe₂)₃[N(TMS)NMe₂] and Ta(NMe₂)₄[N(TMS)NMe₂] and the presence of an η²-hydrazido(I) ligand. Preliminary data using Ta(NMe₂)₄[N(TMS)NMe₂] as an ALD precursor for the preparation of tantalum nitride and tantalum oxide thin films are presented.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

炔烃桥和氢桥铍化合物中铍原子的共价

根据作者之一提出的共价的新定义，用DV－X_αSCC和自然健轨道法研究了[MeBe(C≡CMe)NMe_3]_2，[Be(C≡CR)_2]_n，[MeBeH·NMe_3]及(BeH_2)_n等化合物中铍原子的共价．结果表明，在这几种化合物中铍原子的共价都是6．     

Reactions of benzopinacol with group 13 alkyl metals:: Crystal structure of Me6In4[OC(C6H5)2C(C6H5)2O]2(OCH3)2, a new alkylalkoxo indium diolate

Reactions of Me₅Al₃[OC(C₆H₅)₂C(C₆H₅)₂O]₂ (1) with alcohols ROH (R = Me, Et, ^tBu) in a 1:1 molar ratio afforded the compound Me₂Al₂[OC(C₆H₅)₂C(C₆H₅)₂O]₂(C₄H₈O) (2) and a mixture of methylaluminum alkoxides. The alcohols acted as the factor formally eliminating a molecule of Me₃Al (as a methylaluminum alkoxide) from compound 1. ^tBu₃Al reacted with an equimolar amount of benzopinacol to form the monomeric complex ^tBuAl[OC(C₆H₅)₂C(C₆H₅)₂O](C₄H₈O) (3). Reactions of Me₃Ga and Me₃In with benzopinacol yielded trinuclear complexes Me₅M₃[OC(C₆H₅)₂C(C₆H₅)₂O]₂ (4 (M = Ga), 5 (M = In)), isostructural to compound 1. In the presence of water and alcohols, compounds 4 and 5 underwent a decomposition reaction to benzopinacol and a mixture of metalloxanes and alkoxides. An unusual methylmethoxo indium benzopinacolate Me₆In₄[OC(C₆H₅)₂C(C₆H₅)₂O]₂(OCH₃)₂ (6) was obtained in the reaction of benzopinacol with Me₃In and Me₂InOMe in a 1:1:1 molar ratio. Molecular structures of the compounds 3, 4 and 6 were determined by X-ray crystallography.     

Molybdenum and tungsten complexes of the neutral tripod ligands HC(pz)3 and MeC(CH2PPh2)3

Starting from [M(CO)₆], seven-coordinated complexes of tungsten and molybdenum containing the facially coordinating ligands HC(pz)₃ (1) and MeC(CH₂PPh₂)₃ (2) were obtained in a two-step reaction sequence. The complexes have a 4:3 piano stool geometry with almost perfect C_S symmetry in the crystal. In solution, they show the typical fluxional behavior for seven-coordinated complexes even at low temperature. Complete oxidative decarbonylation occurs when [HC(pz)₃Mo(CO)₃] (4) or [MeC(CH₂PPh₂)₃Mo(CO)₃] (6) are treated with an excess of I₂ or Br₂.     

Reaction of [CpRu(CH3CN)3]PF6 with bidentate ligands: structural characterization of [{CpRu(CH3CN)2}2(μ-η-dppe)](PF6)2 [dppe=1,2-bis(diphenylphosphino)ethane]

The reaction of [CpRu(CH₃CN)₃]PF₆ with the bidentate ligands L-L=1,2-bis(diphenylphosphino)ethane, dppe, and (1-diphenylarsino-2-diphenylphosphino)ethane, dpadppe, affords mononuclear or dinuclear complexes of formula [CpRu(η²-L-L)(CH₃CN)]PF₆, [{CpRu(CH₃CN)₂}₂(μ-η^1:1-L-L)](PF₆)₂ and [{CpRu(CH₃CN)}₂(μ-η^1:1-L-L)₂](PF₆)₂ (L-L=dppe, dpadppe). All of the compounds are characterized by microanalysis and NMR [¹H and ³¹P{¹H}] spectroscopy. The crystal structure of [{CpRu(CH₃CN)₂}₂(μ-η^1:1-dppe)](PF₆)₂ has been determined by X-ray diffraction analysis. The complex exhibits a dppe ligand bridging two CpRu(CH₃CN)₂ fragments.