Two gold-ruthenium clusters derived from Ru3(μ-H)3(μ3-CBr)(CO)9

The reaction between AuMe(PPh₃) and Ru₃(μ-H)₃(μ₃-CBr)(CO)₉ (1) affords the novel heptanuclear cluster Au₄Ru₃(μ₃-CMe)(Br)(CO)₉(PPh₃)₃ (2), containing an Au/Ru₃/Au trigonal pyramidal cluster face-capped by two Au(PPh₃) groups and a CMe ligand, together with Au₂Ru₃(μ-H)(μ₃-CMe)(CO)₉(PPh₃)₂ (3), formed by isolobal replacement of two of the three μ-H atoms in 1 by Au(PPh₃) groups. The latter co-crystallises with the analogous μ₃-CH complex, as also shown spectroscopically.     

Synthesis,structure characterization and thermal properties of [Zr6(μ3-O)4(μ3-OH)4(OOCCH2Bu)9(μ2-OH)3]2

Oxo/hydoxo zirconium(IV) complex of the general formula [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉(μ₂-OH)₃]₂ has been isolated, when Zr(OⁱPr)₄ reacted with a 2-fold excess of 3,3-dimethylbutyric acid. Single crystal X-ray diffraction data, collected at 103 and 153 K, showed that the studied compound crystallizes in hexagonal system (P6₃/m (no. 176)). Structure consists of dimers composed of [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉] sub-units, linked by six μ₂-OH bridges. Infrared spectroscopic studies proved the presence of hydroxo groups in the structure of studied clusters and formation of different types of oxo/hydroxo bridges. The application of variable temperature infrared spectroscopy and differential scanning calorimetry revealed that the structure of this complex undergoes the phase transitions at 143–183 and 203–293 K. Comparison of spectral and crystallographic data suggests that these phase transitions might be related to changes in the strength of Zr–O bonds of μ₂-OH bridges linking complex sub-units, and change in symmetry of the crystal lattice (from hexagonal to trigonal). Analysis of thermogravimetric data showed that decomposition of [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉(μ₂-OH)₃]₂ proceeds with complete conversion to ZrO₂ (monoclinic form) between 603 and 803 K.     

Synthesis and crystal structure of new one-dimensional copper(II) complex [Cu4(En)2(μ1,1-N3)4(μ1,1,1-N3)2(μ1,3-N3)2]n

A new polymer azido-bridged copper(II) complex [Cu₄(En)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂(μ_1,3-N₃)₂] _n (I) (En = ethylenediamine) has been synthesized and crystallography characterized. Complex I shows one-dimensional coordination polymeric structure based on a tetranuclear cluster unit [Cu₄(En)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂(μ_1,3-N₃)₂], in which the azido ions display three different bridging modes.     

Novel chromium trinuclear trifluoroacetate complexes Cr3(μ3-O)(CF3COO)6(CH3COOH)2(CF3COO) and Cr3(μ3-O)(CF3COO)6(CH3COOH)2(THF): Synthesis and crystal structure

Novel anhydrous trinuclear ₃-oxo complexes of Cr(III), Cr₃(₃-O)(CF₃COO)₆(CH₃COOH)₂(CF₃COO) (I) and of Cr(III,III,II), Cr₃(₃-O)(CF₃COO)₆(CH₃COOH)₂(THF) (II) (where THF is (CH₂)₄O) are synthesized by anodic dissolution of metallic chromium in solutions of trifluoroacetic acid in acetonitrile and in tetrahydrofuran and their structures are studied by X-ray diffraction analysis. Complex I forms orthorhombic crystals with space group Pna2₁, a = 9.778(1) , b = 16.042(2) , c = 22.851(4) , Z = 4, R ₁ = 0.0332; complex II crystallizes in monoclinic system: space group P2₁/c, a = 9.866(1) , b = 17.895(2) , c = 21.167(4) , = 100.75(2)°, Z = 4, R = 0.0422. The average Cr-(₃-O) distances in compounds I and II are almost equal (1.943(3) and 1.927(3) ). An average length of the Cr-O bond in octahedral surrounding of metal atoms is different in complexes I and II (1.985(4) and 2.003(3) , respectively), which is specified by different oxidation states of the metal atom. The CrCr distances lie in an interval of 3.366(1)–3.337(1) .__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 4, 2005, pp. 266–272.Original Russian Text Copyright © 2005 by Glazunova, Boltalin, Troyanov.     

Synthesis and structural characterisation of the palladium N-heterocyclic carbene cluster complexes [Pd3(μ-CO)3(NHC)3] and [Pd3(μ-SO2)3(NHC)3]

The reduction of trans-[Pd(NHC)₂Cl₂] (NHC = IMes, 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene; IⁱPr₂ = 1,3-bis-isopropylimidazol-2-ylidene) with potassium graphite under an atmosphere of CO affords the palladium NHC carbonyl clusters [Pd₃(μ-CO)₃(NHC)₃] (NHC = IMes, 1; IⁱPr₂, 3). Treatment of 1 with SO₂ at room temperature yields the bridging SO₂ complex [Pd₃(μ-SO₂)₃(IMes)₃] (4) in quantitative yield. Complexes 1, 3 and 4 have been structurally characterised by X-ray crystallography.     

Stepwise addition of CuBr at [(dtc)2Mo2(S)2(μ-S)2] (dtc=diethyldithiocarbamate): syntheses and crystal structures of two Mo/Cu/S clusters [(dtc)2Mo2(μ3-S)(μ-S)3(CuBr)] and [(dtc)2Mo2(μ3-S)4(CuBr)2]

Reactions of [(dtc)₂Mo₂(S)₂(μ-S)₂] with one or two equivalents of CuBr in CH₂Cl₂ afforded two new heterobimetallic sulfide clusters, [(dtc)₂Mo₂(μ₃-S)(μ-S)₃(CuBr)] (1) and [(dtc)₂Mo₂(μ₃-S)₄(CuBr)₂] (2). Both compounds were characterized by elemental analysis, IR, UV-vis and X-ray analysis. Compound 1 contains a butterfly-shaped Mo₂S₄Cu core in which one CuBr unit is coordinated by one bridging S and two terminal S atoms of the [(dtc)₂Mo₂(S)₂(μ-S)₂] moiety. In the structure of 2, one [(dtc)₂Mo₂(S)₂(μ-S)₂] moiety and two CuBr units are held together by six Cu-μ₃-S bonds, forming a cubane-like Mo₂S₄Cu₂ core.     

Crystal structure of [(C5Me4Et)3Rh3(μ3-Se)2](PF6)2CH3CN and [(C5Me4Et)2Rh2(μ2-Cl)3]PF6

The crystal structure of [(C₅Me₄Et)₃Rh₃(μ₃-Se)₂](PF₆)₂ and [(C₅Me₄Et)₂Rh₂(μ₂-Cl)₃]PF₆, obtained in the reaction of [(C₅Me₄Et)Rh(C₆H₆)](PF₆)₂ with ZnSe in 4M HCl under hydrothermal conditions, is determined. In agreement with the 18VE rule, the triangular cluster contains single metal-metal bonds (Rh-Rh 2.864(1) ?), whereas they are absent in the binuclear complex (Rh ...Rh 3,216(1) ?). Original Russian Text Copyright ? 2009 by P. A. Abramov, M. N. Sokolov, A. V. Virovets, and V. P. Fedin __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 50, No. 1, pp. 169–172, January–February, 2009.     

Reactivity of [Os3(CO)10(NCMe)2] and [Os3(CO)10(μ-Cl)(μ-AuPPh3)] with 4-mercaptopyridine: X-ray structure of [Os3(CO)10(μ-H)(μ-SC5H4N)] and [Os3(CO)10(μ-AuPPh3)(μ-SC5H4N)]

The compound [Os₃(CO)₁₀(μ-Cl)(μ-AuPPh₃)] (2) was prepared from the reaction between [Os₃(CO)₁₀(NCMe)₂] (1) and [AuClPPh₃] under mild conditions. The reaction of 2 with 4-mercaptopyridine (4-pyS) ligand yielded compounds [Os₃(CO)₁₀(μ-H)(μ-SC₅H₄N)] (4), formed by isolobal replacement of the fragment [AuPPh₃]⁺ by H⁺ and [Os₃(CO)₁₀(μ-AuPPh₃)(μ-SC₅H₄N)] (5). [Os₃(CO)₁₀(μ-H)(μ-SC₅H₄N)] (4) was also obtained by substitution of two acetonitrile ligands in the activated cluster 1 by 4-pyS, at room temperature in dichloromethane. Compounds 2-5 were characterized spectroscopically and the molecular structures of 4 and 5 in the solid state were obtained by single crystal X-ray diffraction studies.     

Diverse coordination of two ligands in ferromagnetic [Cu(μ-HCO2)2(3-pyOH)]n and [Cu2(μ-HCO2)2(μ-3-pyOH)2(3-pyOH)2(HCO2)2]n

Two novel polynuclear complexes with methanoate anions and 3-hydroxypyridine ligands [Cu(μ-HCO₂)₂(3-pyOH)]_n (1) and [Cu₂(μ-HCO₂)₂(μ-3-pyOH)₂(3-pyOH)₂(HCO₂)₂]_n (2), respectively, were synthesized and characterized. The central copper atom in 1 is surrounded by four methanoates and a 3-pyOH molecule, forming a square-pyramidal CuO₃NO chromophore. All the methanoates are bidentate and serve as bridges between the adjacent copper ions via syn-anti and anti–anti coordination. The basal square coordination axes are formed by O(syn), N(3-pyOH) (1.974(2), 2.016(2) Å) and O(anti), O(anti) (1.945(2), 1.960(2) Å), while the third O(anti) (2.247(2) Å) is on the top of the pyramid. A ferromagnetic transition with an exchange constant 2J/k_B = 9.2 cm⁻¹ is found for 1 below 20 K. This interaction probably takes place through two syn-anti methanoates extended in a chain through the 2D structure. On the other hand, two monoatomic Cu–O–Cu intra-dinuclear asymmetric (1.986(2), 2.415(2) Å) bridges of two methanoates in [Cu₂(HCO₂)₄(3-pyOH)₄] (2) are present. An elongated distorted octahedral coordination sphere around each copper(II) atom is completed by an additional monodentate terminal methanoate (1.975(2) Å), two N-coordinated 3-pyOH (2.005(2), 2.002(2) Å) and the third weakly O-coordinated 3-pyOH (2.732(2) Å). Although a shorter Cu?Cu distance is noticed in 2 than in 1 (4.690(1) Å 1, 3.442(1) Å 2), much weaker ferromagnetism is found in 2.     

Syntheses and molecular structures of Ru3(μ-H)(μ3-CPh2CCCCPh)(CO)9 and Ru3{μ3-CPhCHCC(CPh2)CHCPh}(μ-CO)(CO)8

The reaction between Ru₃(μ-H){μ₃-C₂CPh₂(OH)}(CO)₉ and HCCPh, carried out in the presence of HBF₄ · Me₂O, afforded the cluster complexes Ru₃(μ-H)(μ₃-CPh₂CCCCPh)(CO)₉ (5) and Ru₃{μ₃-CPhCHCC(CPh₂)CHCPh}(μ-CO)(CO)₈ (6), both of which were characterised by single-crystal X-ray studies.     

Thiolate-bridged heterometallic complexes of manganese and platinum: Synthesis and molecular structures of (CO)4Mn(μ-SPh)Pt(PPh3)2, (CO)3(PPh3)Mn(μ-SPh)Pt(PPh3)(CO), and (CO)3Mn(μ-SPh)Pt(PPh3)(Dppm)

A reaction of the dimer [Mn(CO)₄(SPh)]₂ with (PPh₃)₂Pt(C₂Ph₂) gave the heterometallic complex (CO)₄Mn(μ-SPh)Pt(PPh₃)₂ (I) and its isomer (CO)₃(PPh₃)Mn(μ-SPh)Pt(PPh₃)(CO) (II). A reaction of complex I with a diphosphine ligand (Dppm) yielded the heterometallic complex (CO)₃Mn(μ-SPh)Pt(PPh₃)(Dppm) (III). Complexes I–III were characterized by X-ray diffraction. In complex I, the single Mn-Pt bond (2.6946(3) ?) is supplemented with a thiolate bridge with the shortened Pt-S and Mn-S bonds (2.3129(5) and 2.2900(6) ?, respectively). Unlike complex I, in complex II, one phosphine group at the Pt atom is exchanged for one CO group at the Mn atom. The Mn-Pt bond (2.633(1) ?) and the thiolate bridge (Pt-S, 2.332(2) ?; Mn-S, 2.291(2) ?) are retained. In complex III, the Mn-Pt bond (2.623(1) ?) is supplemented with thiolate (Pt-S, 2.341(2) ?; Mn-S, 2.292(2) 0?) and Dppm bridges (Pt-P, 2.240(1)?; Mn-P, 2.245(2) ?). Apparently, the Pt atom in complexes I–III is attached to the formally double bond , as in Pt complexes with olefins.     

四核铁配合物[Fe4(NTB)4(μ2-O)2(μ4-Suc)](ClO4)6促进DNA水解

四核铁配合物[Fe₄(NTB)₄(μ₂-O)₂(μ₄-Suc)](ClO₄)₆与DNA具有较强的结合作用，结合常数k_{b达(5.9±0.4)×10⁵ L·mol^-1。该多核铁配合物由水解途径促进DNA断裂，在酸性及低离子浓度条件下的促进作用较为显著。动力学分析表明DNA水解没有明显的序列选择性，质粒DNA从超螺旋转变为切口形式符合饱和酶动力学规律，饱和速率常数ksat=0.014 min^-1。}     

簇合物Co3(CO)7(μ3-S)[μ,η2-CNP(S)(C6H4OCH3)OC(Ph)CH]和Co3(CO)7(μ3-S)[μ,η2-SCNC(CH3)2P(S)(Cl)N(Ph)]的合成与晶体结构

用Co₂(CO)₈分别与两个杂环配体C(S)NHP(S)(C₆H₄OCH₃)OC(Ph)CH (L₁)和C(S)NHC(CH₃)₂P(S)(Cl)N(Ph) (L₂)反应,合成两个新的三核钴羰基硫簇合物Co₃(CO)₇(μ₃-S)[μ,η²-CNP(S)(C₆H₄OCH₃)OC(Ph)CH](Ⅰ)和Co₃(CO)₇(μ₃-S)[μ,η²-SCNC(CH₃)₂P(S)(Cl)N(Ph)](Ⅱ)。用元素分析,IR, ¹H NMR, ³¹P NMR及MS谱表征了它们的结构,同时用X射线衍射法测定了它们的晶体分子结构,二者属于三斜晶系,空间群P1,Ⅰ的晶胞参数为:a=0.84768(1)nm,b=1.19049(3)nm,c=1.43639(1)nm,α=86.926(1)°,β=81.601(3)°,γ=88.535(2)°,V=1.4318(5)nm³,Z=2,D_c=1.641g·cm^-3,F(000)=716,μ=1.893mm^-1,R=0.0602,R_w=0.1515。Ⅱ的晶胞参数为:a=1.2050(2)nm,b=1.2448(2)nm,c=0.8951(2)nm,α=97.49(1)°,β=93.552(4)°,γ=108.432(3)°,V=1.2554(3)nm³,Z=2,D_c=1.841g·cm^-3,F(000)=690,μ=2.419mm^-1,R=0.0423,R_w=0.1075。Ⅰ和Ⅱ的分子骨架Co3S为三角锥构型,S作为面桥基配体,所有CO作为端基配体与三个Co原子成键。Ⅰ中含有CoCoCN四元环组件,Ⅱ中含有CoCoSCN五元环组件。     

[Zn10(μ4-S)(μ3-S)6(Py)9(SO4)3] as a molecular model of ZnS surfaces: an experimental and theoretical study

Experimental and theoretical results pertaining to [Zn₁₀(μ₄-S)(μ₃-S)₆(Py)₉(SO₄)₃], a possible molecular model of ZnS S-terminated polar surfaces, as well as a potential source of strictly monodispersed ZnS quantum dots, are presented and discussed. The results of density functional theory (DFT) calculations provided a rationale for the peculiar arrangement of [Zn₁₀(μ₄-S)(μ₃-S)₆(Py)₉(SO₄)₃] clusters in the solid state, contemporarily indicating the unsuitability of the isolated species to mimic whatever (polar or non-polar) ZnS surface. Despite the fact that such a failure is further confirmed by time-dependent DFT and UV–Vis diffuse reflectance spectroscopy, the combined use of theoretical outcomes, DRIFT measurements, and literature data pertaining to the surface chemical properties of ZnS (Hertl in Langmuir 4:594, 1988) ultimately testifies that [Zn₁₀(μ₄-S)(μ₃-S)₆(Py)₉(SO₄)₃] is perfectly suited to model the interaction of pyridine molecules with ZnS surface Lewis acid sites. The herein reported theoretical results are expected to be a useful reference for the interpretation of chemisorption experiments of Py-based Lewis bases on single crystal ZnS surfaces.     

Formation of the silylene-bridged complex Fe2(CO)6(μ2-SiCl2)3 from cis-Fe(CO)4(SiCl3)2: an experimental and computational study

Abstract  

Thermolysis of cis-Fe(CO)₄(SiCl₃)₂ results in the formation of the novel compound Fe₂(CO)₆(μ₂-SiCl₂)₃, which was characterized by single crystal X-ray diffraction. Density functional theory calculations were carried out to elucidate possible reaction steps leading to the formation of Fe₂(CO)₆(SiCl₂)₃, including CO dissociation and chlorine abstraction by a SiCl₃ radical generated from homolytic Fe–Si bond cleavage involving a singlet–triplet intersystem crossing.     

Cluster Oxalate Complexes [W3(μ3-Q)(μ2-Q)3 (C2O4)3(H2O)3]2? (Q=S, Se): Mechanochemical Synthesis and Crystal Structure

Mechanochemical reaction of cluster coordination polymers (Q=S, Se) with solid leads to the cluster core excision with the formation of anionic complexes . Extraction of the reaction mixture with water followed by crystallization gives crystalline (main product) and (1) (minor product). In the case of the Se cluster, the complex could not be isolated, and the treatment of the aqueous extract with PPh₃ gave (2) in a low yield. Alternatively, it was obtained from and in high yield. Both 1 and 2 were characterized by X-ray structure analysis. Dedicated to Academician I. I. Moiseev on the occasion of his 75th birthday and in recognition of his outstanding contribution to cluster chemistry.     

Reaction of the heteronuclear cluster RuOs3(μ-H)2(CO)13 with toluene

The heteronuclear cluster RuOs₃(μ-H)₂(CO)₁₃ (4) reacts with refluxing toluene to form the clusters Ru₂Os₃(μ-H)₂(CO)₁₆ (5) RuOs₃(CO)₉(μ-CO)₂(η⁶-C₆H₅Me) (6) and Ru₂Os₃(CO)₁₂(μ-CO)(η⁶-C₆H₅Me) (7). Cluster 5 exists as a mixture of five isomers. The inter-relationship among the clusters has also been investigated.     

Reactivity of the heteronuclear cluster RuOs3(μ-H)2(CO)13 with indene

The heteronuclear cluster RuOs₃(μ-H)₂(CO)₁₃ (1) reacts with indene under thermal activation to afford the novel clusters RuOs₃(μ-H)(CO)₉(μ-CO)₂(η⁵-C₉H₇) (3), RuOs₃(μ-H)(CO)₉(μ₃,η⁵:η²:η²-C₉H₇) (4) and Ru₂Os₃(μ-H)(CO)₁₁(μ₃,η⁵:η²:η²-C₉H₇) (5), the latter two possessing indenyl ligands in the μ₃,η⁵:η²:η² bonding mode. Cluster 5 exists as a mixture of two isomers. The inter-relationship among the clusters has also been investigated.     

Synthesis and molecular structures of the Co3(μ-OOCPh)4(μ,η2-OOCPh)2[OC(Ph)OHNEt3]2 and Co(Hdmpz)2(OOCPh)2 complexes (Hdmpz = 3,5-dimethylpyrazole)

The product of the thermal reaction between cobalt acetate hydrate and benzoic acid reacts with a triethylamine excess to form the trinuclear complex Co₃(μ-OOCPh)₄(μ,η²-OOCPh)₂[OC(Ph)OHNEt₃]₂, and its reaction with 3,5-dimethylpyrazole yields the mononuclear complex Co(Hdmpz)₂(OOCPh)₂. The compound structures are discussed on the basis of X-ray crystallographic data.