Effect of ketimide ligand for ethylene polymerization and ethylene/norbornene copolymerization catalyzed by (cyclopentadienyl)(ketimide)titanium complexes-MAO catalyst systems: Structural analysis for CpTiCl2(NCPh2)

Ligand effects on the catalytic activity [and norbornene (NBE) incorporation] for both ethylene polymerization and ethylene/NBE copolymerization using half-titanocenes (titanium half-sandwich complexes) containing ketimide ligand of type Cp′TiCl₂[NC(R¹)R²] [Cp′ = Cp (1), C⁵Me⁵ (Cp^∗, 2); R¹,R² = ^tBu,^tBu (a), ^tBu,Ph (b), Ph,Ph (c)]-methylaluminoxane (MAO) catalyst systems have been investigated. CpTiCl₂[NC(^tBu)Ph] (1b) CpTiCl₂(NCPh₂) (1c), and Cp^∗TiCl₂(NCPh₂) (2c) were prepared and identified; the structure of Cp^∗TiCl₂(NCPh₂) (2c) was determined by X-ray crystallography. The catalytic activity for ethylene polymerization increased in the order: 1a > 1b > 1c, suggesting that an electronic nature of the ketimide ligand affects the activity. However, molecular weight distributions for resultant (co)polymers prepared by 1b,c and by 2c-MAO catalyst systems were bi- or multi-modal, suggesting that the ketimide substituent plays a key role in order for these (co)polymerizations to proceed with single catalytically-active species. CpTiCl₂(NC^tBu₂) (1a) exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization.     

Electrochemical, EPR and computational results on [Fe2Cp2(CO)2]-based complexes with a bridging hydrocarbyl ligand

The dimetallacyclopentenone complexes [Fe₂Cp₂(CO)(μ−CO){μ−η¹:η³−C_αHC_β(R)C(O)}] (R = CH₂OH, 1a; R = CMe₂OH, 1b; R = Ph, 1c) were prepared by photolytic reaction of [Fe₂Cp₂(CO)₄] with alkyne according to the literature procedure. The X-ray and the electrochemical characterization of 1c are presented. The μ-allenyl compound [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β−C_αHC_βCMe₂][BF₄] ([2][BF₄]), obtained by reaction of 1b with HBF₄, underwent monoelectron reduction to give a radical species which was detected by EPR at room temperature. The EPR signal has been assigned to [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β-C_αHC_βCMe₂}], [2]^•. The molecular structures of [2]⁺ and [2]^• were optimized by DFT calculations. The unpaired electron in [2]^• is localized mainly at the metal centers and, coherently, [2]^• does not undergo carbon-carbon dimerization, by contrast with what previously observed for the μ-vinyl radical complex [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²-CHCH(Ph)}]^•, [3]^•. Electron spin density distributions similar to the one of [2]^• were found for the μ-allenyl radical complexes [Fe₂Cp₂(CO)₂(μ-CO){μ-η¹:η²_α,β-C_αHC_βC(R¹)(R²)}]^• (R¹ = R² = H, [4]^•; R¹ = H, R² = Ph, [5]^•; R¹ = R² = Ph, [6]^•).     

A 2-iridathiophene from reaction between IrCl(CS)(PPh3)2 and Hg(CHCHPh)2

The thiocarbonyl analogue of Vaska’s compound is produced in high yield by first treating IrCl(CO)(PPh₃)₂ with CS₂ and methyl triflate to give [Ir(κ²-C[S]SMe)Cl(CO)(PPh₃)₂]CF₃SO₃ (1), secondly, reacting 1 with NaBH₄ to give IrHCl(C[S]SMe)(CO)(PPh₃)₂ (2), and finally heating 2 to induce elimination of both MeSH and CO to produce IrCl(CS)(PPh₃)₂ (3). When IrCl(CS)(PPh₃)₂ is treated with Hg(CHCHPh)₂ the novel 2-iridathiophene, Ir[SC₃H(Ph-3)(CHCHPh-5)]HCl(PPh₃)₂ (4) is produced. The X-ray crystal structure of the iodo-derivative of 4, Ir[SC₃H(Ph-3)(CHCHPh-5)]HI(PPh₃)₂ (5) confirms the unusual 2-metallathiophene structure. Treatment of IrCl(CS)(PPh₃)₂ with Hg(CHCPh₂)₂ produces both a coordinatively unsaturated 1-iridaindene, Ir[C₈H₅(Ph-3)]Cl(PPh₃)₂ (6) and a chelated dithiocarboxylate complex, Ir(κ²-S₂CCHCPh₂)Cl(CHCPh₂)(PPh₃)₂ (7). X-ray crystal structure determinations for 6 and 7 are reported.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of tungsten (R′O)2(ArN)WCH-SiR2-CHW(NAr)(OR′)2 (R = Me, Ph) and (R′O)2(ArN)WCH-SiMe2SiMe2-CHW(NAr)(OR′)2

Bimetallic alkylidene complexes of tungsten (R′O)₂(ArN)WCH-SiR₂-CHW(NAr)(OR′)₂ (R = Me (1), Ph (2)) and (R′O)₂(ArN)WCH-SiMe₂SiMe₂-CHW(NAr)(OR′)₂ (3) (Ar = ; R′ = CMe₂CF₃) have been prepared by the reactions of divinyl silicon reagents R₂Si(CHCH₂)₂ with known alkylidene compounds R′′-CHMo(NAr)(OR′)₂. (R′′ = Bu^t, PhMe₂C) Complexes 1-3 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1-3 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and 3 and predominant cis-units content in the case of 2.     

Silicon version of enamines: Amino-substituted disilenes by the reactions of the disilyne RSiSiR (R = SiPr[CH(SiMe3)2]2) with amines

The reaction of 1,1,4,4-tetrakis[bis(trimethylsilyl)methyl]-1,4-diisopropyltetrasila-2-yne 1 with secondary or primary amines produced amino-substituted disilenes R(R₂′N)SiSiHR 2a-d (R = SiⁱPr[CH(SiMe₃)₂]₂, R₂′NEt₂N (2a), (CH₂CH₂)₂N (2b), ^tBu(H)N (2c), and Ph₂N (2d)). Spectroscopic and X-ray crystallographic analyses of 2 showed that 2a-c have a nearly coplanar arrangement of the SiSi double bond and the amino group, giving π-conjugation between the SiSi double bond and the lone pair on the nitrogen atom, whereas 2d has a nearly perpendicular arrangement precluding such conjugation. Theoretical calculations indicate that π-conjugation between the π-orbital of the SiSi double bond and the lone pair on the nitrogen atom is markedly influenced by the torsional angle between the SiSi double-bond plane and the amino-group plane.     

Some complexes containing carbon chains end-capped by M(CO)2Tp′ [M = Mo, W; Tp′ = HB(pz)3, HB(dmpz)3] groups

Complexes M(CCCSiMe₃)(CO)₂Tp′ (Tp′ = Tp [HB(pz)₃], M = Mo 2, W 4; Tp′ = Tp^∗ [HB(dmpz)₃], M = Mo 3) are obtained from M(CCCSiMe₃)(O₂CCF₃)(CO)₂(tmeda) (1) and K[Tp′].Reactions of 2 or 4 with AuCl(PPh₃)/K₂CO₃ in MeOH afforded M{CCCAu(PPh₃)}(CO)₂Tp′ (M = Mo 5, W 6) containing C₃ chains linking the Group 6 metal and gold centres.In turn, the gold complexes react with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ to give the C₄-bridged {Tp(OC)₂M}CCCC{Co₃(μ-dppm)(CO)₇} (M = Mo 7, W 8), while Mo(CBr)(CO)₂Tp^∗ and Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ give {Tp^∗(OC)₂Mo}C(CC)₂C{Co₃(μ-dppm)(CO)₇} (9) via a phosphine-gold(I) halide elimination reaction. The C₃ complexes Tp′(OC)₂MCCCRu(dppe)Cp^∗ (Tp′ = Tp, M = Mo 10, W 11; Tp′ = Tp^∗, M = Mo 12) were obtained from 2-4 and RuCl(dppe)Cp^∗ via KF-induced metalla-desilylation reactions. Reactions between Mo(CBr)(CO)₂Tp^∗ and Ru{(CC)_nAu(PPh₃)}(dppe)Cp^∗ (n = 2, 3) afforded {Tp^∗(OC)₂Mo}C(CC)_n{Ru(dppe)Cp^∗} (n = 2 13, 3 14), containing C₅ and C₇ chains, respectively. Single-crystal X-ray structure determinations of 1, 2, 7, 8, 9 and 12 are reported.     

The CO and CS bond cleavage in carbon dioxide and tolyl isothiocyanate by reactions with the Mo(0) tetraphosphine complex [Mo{meso-o-C6H4(PPhCH2CH2PPh2)2}(Ph2PCH2CH2PPh2)]

A Mo(0) complex containing a new tetraphosphine ligand [Mo(P₄)(dppe)] (1; P₄ = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂, dppe = Ph₂PCH₂CH₂PPh₂) reacted with CO₂ (1 atm) at 60 °C in benzene to give a Mo(0) carbonyl complex fac-[Mo(CO)(η³-P₄O)(dppe)] (2), where the O abstraction from CO₂ by one terminal P atom in P₄ takes place to give the dangling P(O)Ph₂ moiety together with the coordinated CO. On the other hand, reaction of 1 with TolNCS (Tol = m-MeC₆H₄) in benzene at 60 °C resulted in the incorporation of three TolNCS molecules to the Mo center, forming a Mo(0) isocyanide-isothiocyanate complex trans,mer-[Mo(TolNC)₂(η²-TolNCS)(η³-P₄S)] (4), where the S abstraction occurs from two TolNCS molecules by P₄ and dppe to give the η³-P₄S ligand and free dppeS, respectively, together with two coordinated TolNC molecules. The remaining site of the Mo center is occupied by the third TolNCS ligating at the CS bond in an η²-manner. The X-ray analysis has been undertaken to determine the detailed structures for 2 and 4.     

The synthesis and single-crystal X-ray structures of palladium(II) and platinum(II) complexes of the difluorovinyl and 1-chloro-2-fluorovinyl-substituted phosphines, PPh2(Z-CFCFH) and PPh2(E-CClCFH)

The coordination chemistry of the fluorovinyl substituted phosphines PPh₂(Z-CFCFH) and PPh₂(E-CClCFH) with K₂MX₄ (M = Pd, Pt; X = Cl, Br, and I) salts has been investigated resulting in the first reported palladium(II) and platinum(II) complexes of phosphines containing partially fluorinated vinyl groups. The complexes have been characterised by a combination of multinuclear [¹H, ¹³C{¹H}, ¹⁹F, ³¹P{¹H}] NMR spectroscopy, and IR/Raman spectroscopy. The single-crystal X-ray structures of trans-[PdX₂{PPh₂(CFCFH)}₂], X = Cl (1), Br (2), I (3), trans-[PdCl₂{PPh₂(CClCFH)}₂] (4), cis-[PtX₂{PPh₂(CFCFH)}₂], X = Cl (5), Br (6), trans-[PtI₂{PPh₂(CFCFH)}₂] (7), and both cis- and trans-[PtCl₂{PPh₂(CClCFH)}₂] (8), have been determined. Results obtained from spectroscopic and crystallographic data suggest that replacement of a β-fluorine by hydrogen, whilst reducing the steric demand of the ligand, has little effect on the electronic character of the ligand. The presence of a proton in the vinyl group results in short proton-halide secondary interactions in the solid state (d(H?X) = 2.72(3) for 1, and 2.92(5) Å for 2) forming an infinite chain ribbon motif.     

Formation of niobium and tantalum ylide complexes

The reactions of tri(bis(ethyl)amino)phosphorus ylide (Et₂N)₃PCH₂ with cyclopentadienyl (Cp) metal (V) tetrachloride CpMCl₄ (M = Nb 1; Ta 3) and pentamethylcycopentadienyl (Cp^∗) metal (V) tetrachloride Cp^∗MCl₄ (M = Nb 2; Ta 4) were investigated. The hexa-coordinate ylide adducts complexes 5 (CpNbCl₄(H₂CP(NEt₂)₃)), 6 (Cp^∗NbCl₄(H₂CP(NEt₂)₃)) and 8 (Cp^∗TaCl₄(H₂CP(NEt₂)₃)) with pseudo-octahedral geometry were structurally analyzed with X-ray diffraction. Compound 4 (Cp^∗TaCl₄) reacted with three molar equivalent of phosphorus ylide to form one ionic complex 9 ([H₃C-P(NEt₂)₃][Cp^∗TaCl₅]) which was also structurally analyzed with X-ray diffraction. The possible formation mechanism of compound 9 has been discussed.     

Synthesis of ruthenium phenylindenylidene, carbyne, allenylidene and vinylmethylidene complexes from (PPh3)3−4RuCl2: A mechanistic and structural investigation

The reaction of (Ph₃P)₃RuCl₂ with 1,1-diphenyl-2-propyn-1-ol was investigated in various solvents. The reaction in thf under reflux is reported to produce the (PPh₃)₂Cl₂Ru(3-phenylindenylidene) complex (3) which has undergone rearrangement of the allenylidene C₃-spine. We have improved the reliability of the reported synthesis by adding acetyl chloride which converts the formed water of the reaction and thus increases the acidity of the reaction solution. Without the additive, we observed the exclusive formation of an intermediate of the transformation and identified it as dinuclear (PPh₃)₂ClRu(μ-Cl)₃(PPh₃)₂RuCCCPh₂ complex (5). The reaction of (Ph₃P)₃₋₄RuCl₂ with 1,1-diphenyl-2-propyn-1-ol in CH₂Cl₂ or C₂H₄Cl₂ under reflux in the presence of excess conc. aqueous HCl afforded the new, neutral (PPh₃)₂Cl₃RuC-CHCPh₂ carbyne complex (7), an HCl adduct of previously elusive (PPh₃)₂Cl₂RuCCCPh₂ complex 6 in high yields. In contrast to the formation of complex 3, the reaction in a non-coordinating solvent did not afford the rearrangement of the allenylidene C₃-spine. Complex 7 was converted into complex 3 in thf under reflux under loss of a molecule HCl. Complex 7 was converted with triethylamine under loss of HCl to complex 6. Pentacoordinate complex 6 was crystallized in the presence of O-donor ligands (EtOH, MeOH and H₂O) to give hexacoordinate (PPh₃)₂Cl₂(ROH)RuCCCPh₂ (R = H, CH₃, C₂H₅) complexes (9)-(11) with the O-donor coordinating in trans-position to the allenylidene moiety. The reaction of complex 7 with 2 equiv. of 4-(N,N-dimethylamino)pyridine (DMAP) gave hexacoordinate (PPh₃)₂Cl₂(DMAP)RuCCCPh₂complex (12) with one molecule DMAP also coordinating in trans-position to the allenylidene group. Methanol and acetic acid in the absence of strong bases afforded the Fischer-carbene complexes (PPh₃)₂Cl₂RuC(OCH₃)-CHCPh₂ (14) and (PPh₃)₂Cl₂RuC(OAc)-CHCPh₂ (15) where the nucleophile added to the α-carbon atom. The structures of complexes 5, 7, 9-11, 14, and 15 were solved via X-ray crystallography.     

On the reactivity of [IrCl(N2)(PPh3)2] with alkynylsilanes - A new route to vinylidene iridium(I) complexes

The iridium dinitrogen complex [IrCl(N₂)(PPh₃)₂] (1) was found to react with alkynylsilanes to form the vinylidene iridium(I) complexes trans- (R/R′ = Ph/Me, 2; Me/Me, 3; Bn/Me, 4; SiMe₃/Me, 5; SiEt₃/Et, 6; ⁱPr/Me, 7) and with Me₃SiCCC(O)R to yield the iridium η²-alkyne complexes trans-[IrCl{η²-Me₃SiCCC(O)R}(PPh₃)₂] (R = OEt, 9; Me, 11). Complex 9 was found to isomerize upon heating or upon UV irradiation yielding the vinylidene complex trans-[IrCl{CC(SiMe₃)CO₂Et}(PPh₃)₂] (10). The reaction of 1 with Me₃SiCCCCSiMe₃ yielded the complex trans-[IrCl{CC(SiMe₃)CCSiMe₃}(PPh₃)₂] (8), whereas with MeO₂CCCCO₂Me the iridacyclopentadiene complex [Ir{C₄(CO₂Me)₄}Cl(PPh₃)₂] (13) was formed. The complexes were characterized by means of ¹H, ¹³C and ³¹P NMR spectroscopy as well as by IR spectroscopy and microanalysis.     

Understanding the role of an easy-to-prepare aldimine-alkyne carboamination catalyst, [Ti(NMe2)3(NHMe2)][B(C6F5)4]

A series of reactivity studies of the carboamination pre-catalyst [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] as well as the preparation of other catalysts are reported in this work. Treatment of [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] with the aldimines Ar′NCHtol (Ar′ = 2,6-Me₂C₆H₃, tol = 4-MeC₆H₄), and depending on the reaction conditions, results in isolation of [Me₂NCHR′][B(C₆F₅)₄] (1) or (Me₂N)₂CHtol, as well as the asymmetric titanium dimer [(Me₂N)₂(HNMe₂)Ti(μ₂-N[2,6-Me₂C₆H₃])₂Ti(NHMe₂)(NMe₂)][B(C₆F₅)₄] (2). Protonation of CpTi(NMe₂)₃ and Cp^∗Ti(NMe₂)₃ results in isolation of the salts, [CpTi(NMe₂)₂(NHMe₂)][B(C₆F₅)₄] (3) and [Cp^∗Ti(NMe₂)₂(NHMe₂)][B(C₆F₅)₄] (4), respectively. Treatment of compounds 3 or 4 with H₂N[2,6-ⁱPr₂C₆H₃] results in formation of the imido salts [CpTi(N[2,6-ⁱPr₂C₆H₃])(NHMe₂)₂][B(C₆F₅)₄] (5) (58% yield) or [Cp^∗Ti(N[2,6-ⁱPr₂C₆H₃])(NHMe₂)₂][B(C₆F₅)₄] (6). When Ti(NMe₂)₄ is treated with [Et₃Si][B(C₆F₅)₄], the salt [Ti(NMe₂)₃(N[SiEt₃]Me₂)][B(C₆F₅)₄] (7) is obtained, and treatment of the latter with [2,6-ⁱPr₂C₆H₃]NCHtol produces the imine adduct [Ti(NMe₂)₃(κ¹-[2,6-ⁱPr₂C₆H₃]NCHtol)][B(C₆F₅)₄] (8). The carboamination catalytic activity of complexes 2-7 was investigated and compared to [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄]. Likewise, a proposed mechanism to the active carboamination catalyst stemming from [Ti(NMe₂)₃(NHMe₂)][B(C₆F₅)₄] is described.     

Heterometallic complexes containing 1,1′-(CC)2Fc′ units linking two different metal centres

Proto-desilylation of 1-(Me₃SiCC)-1′-{Cp^∗(dppe)RuCC}Fc′ (1) afforded the corresponding ethynyl derivative 2, from which the green Co₂(μ-dppm)_n(CO)_8−2n (n = 0, 1) adducts 3 and 4 were obtained. Replacement of the ethynyl proton in reactions between 2 and AuCl(PPh₃), Hg(OAc)₂ or FeCl(dppe)Cp^∗ gave complexes 1-(RCC)-1′-{Cp^∗(dppe)RuCC}Fc′ [R = Au(PPh₃) 5, 1/2Hg 6, Fe(dppe)Cp^∗8]; the latter gave bis-vinylidene 9 with MeI, characterised (as was 2) by a single crystal X-ray study. Oxidative coupling of 2 (CuCl/tmeda/acetone, air) gave diyne 10, while coupling of 5 with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ afforded 1-{Cp^∗(dppe)RuCC}-1′-{(OC)₇(μ-dppm)Co₃(μ₃-CCC)}Fc′ (11). Cyclic voltammetric measurements indicated that there was no significant electronic coupling between the end-groups through the ferrocene centre in any of these compounds.     

Oxime-substituted NCN-pincer palladium and platinum halide polymers through non-covalent hydrogen bonding (NCN = [C6H2(CH2NMe2)2-2,6])

The oxime-substituted NCN-pincer molecules HONCH-1-C₆H₃(CH₂NMe₂)₂-3,5 (2a) and HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 (2b) were accessible by treatment of the benzaldehydes H(O)C-4-C₆H₃(CH₂NMe₂)₂-3,5 (1a) and H(O)C-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 (1b) with an excess of hydroxylamine. In the solid state both compounds are forming polymers with intermolecular O-H?N connectivities between the Me₂NCH₂ substituents and the oxime entity of further molecules of 2a and 2b, respectively. Characteristic for 2a and 2b is a helically arrangement involving a crystallographic 2₁ screw axis of the HONCH-1-C₆H₃(CH₂NMe₂)₂-3,5 and HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 building blocks.The reaction of 2b with equimolar amounts of [Pd₂(dba)₃ · CHCl₃] (3) (dba = dibenzylidene acetone) or [Pt(tol)₂(SEt₂)]₂ (4) (tol = 4-tolyl) gave by an oxidative addition of the C-Br unit to M coordination polymers with a [(HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6)MBr] repeating unit (5: M = Pd, 6: M = Pt). Complexes 5 and 6 are in the solid state linear hydrogen-bridged polymers with O-H?Br contacts between the oxime entities and the metal-bonded bromide.     

A new mechanism of nucleophilic vinylic substitution and unexpected products in the reaction of chlorotrifluoroethylene with [Re(CO)5]Na and [CpFe(CO)2]K

The mechanism of chloride substitution in CF₂CFCl with [Re(CO)₅]⁻ and [CpFe(CO)₂]⁻ anions is investigated experimentally and theoretically. The substitution reaction begins with the nucleophile addition to CF₂CFCl producing the carbenoid anion [MCF₂CFCl]⁻ (A) (M = Re(CO)₅, CpFe(CO)₂). This is shown by trapping the intermediate A with electrophiles - proton donor (t-BuOH) to give MCF₂CFClH or with CF₂CFRe(CO)₅ to give acylmetallate III, and by the formation of the substitution products CF₂CFM from the anion A, generated by the deprotonation of MCF₂CFClH with t-BuOK. 1,2-Shift of metal carbonyl group concerted with the α-elimination of chloride anion is proposed as the transformation pathway of carbenoid A into CF₂CFM. A competing process of carbene insertion into Fe-CO bond is proposed to explain the formation of (XI). The feasibility of these two pathways is confirmed by DFT (B3LYP/SDD and 6-31G^∗) calculations of the carbenes [MCF₂CF:] and carbenoid anions [MCF₂CFCl]⁻. Transition states (TS) for 1,2-shift (+3.2 kcal/mol) and for nucleophilic addition at CO ligand (+5.4 kcal/mol) are located for [(CO)₅ReCF₂CFCl]⁻, but only one TS corresponding to carbene insertion into Fe-CO bond (+2.1 kcal/mol) is located for [(CO)₂CpFeCF₂CFCl]⁻. The formation of other newly observed products, F(CO)CHFRe(CO)₅ (V) and Cp(CO)₂FeCCFeCp(CO)₂ (VIII) is also discussed.     

Reactions of Ru(Cp) complexes with P(o-tolyl)3

Reaction of [Ru(Cp^∗)(CH₃CN)₃](PF₆) with P(o-tolyl)₃ affords [Ru(Cp^∗){(η⁶-o-tolyl)P(o-tolyl)₂}](PF₆) (4) in which the P-atom is not coordinated to the metal. The solid-state structure of 4 has been determined. A related reaction with P(p-tolyl)₃ reveals a small quantity [Ru(Cp^∗){(η⁶-p-tolyl)P(o-tolyl)₂}](PF₆), in solution, but mostly the expected bis-phosphine complex. Reaction of the Ru(IV) dication, [Ru(Cp^∗)(η³-PhCHCHCH₂)(DMF)₂](PF₆)₂, with P(o-tolyl)₃ gives a mixture of the phosphonium salt, C₆H₅CHCHCH₂P(o-tolyl)₃ (9) and the dication [Ru(Cp^∗) (η⁶-C₆H₅CHCHCH₂P(o-tolyl)₃)](PF₆)₂ (10). Salt 9 forms via attack of the P-atom on the allyl ligand. The latter product results from complexation of 9 via the phenyl group of the former allyl ligand. It would seem that the sterically demanding P(o-tolyl)₃ ligand is not readily compatible with the Ru(Cp^∗) fragment, in either the +2 or +4 oxidation state. Detailed NMR studies are reported.     

Reaction of multifunctional molecule (Ph2P(o-C6H4)CHNCH2CH2)3N with triosmium carbonyl clusters

Reaction of (Ph₂P(o-C₆H₄)CHNCH₂CH₂)₃N with 3 equiv. of Os₃(CO)₁₀(NCMe)₂ at ambient temperature affords the triple cluster [Os₃(CO)₁₀Ph₂P(o-C₆H₄)CHNCH₂CH₂]₃N (1) through coordination of the phosphine and imine groups. Thermolysis of 1 in benzene leads to decarbonylation and C-H/C-N bond activation of the ligand to generate (μ-H)Os₃(CO)₈(μ₃-Ph₂P(o-C₆H₄)CHNCCH₂) (2). The molecular structure of 2 has been determined by an X-ray diffraction study.     

Triosmium compounds containing the oxametallacycle [Os(CO)3{C(R)CHC(O)CHC(H)C5H4FeC5H5}] moiety. Synthesis and electrochemical studies

The compounds [Os₃(CO)₁₀{μ,η³-(SCH₂CH₂SCCHC(O)CHCH(C₅H₄)Fe (C₅H₅)}] (2), [Os₃(CO)₉{μ,η³-(SCH₂CH₂SCCHC(O)CHCH(C₅H₄)Fe(C₅H₅)}] (3) and [Os₃(CO)₈{μ₃,η²-{CCHC(O)CHCH(C₅H₄)Fe(C₅H₅)}(SCH₂CH₂S)}] (4) have been obtained by rupture of S-C bonds in the ketene dithioacetal [C₅H₅FeC₅H₄CHCHC(O)CHC(SCH₂CH₂S)], in their reaction with the activated cluster [Os₃(CO)₁₀(NCMe)₂]. The presence of an oxametallacycle in these derivatives has been confirmed by an X-ray diffraction analysis. The electrochemical study has indicated the ability of these compounds to modify the electrode surfaces.     

Syntheses and molecular structures of 18/16-electron half-sandwich iridium(III) complexes with chelating anilido-imine ligands

A 18-electron complex Cp^∗IrCl[o-C₆H₄N(C₆H₃-Me-p) (CHNC₆H₃-Me-p)] (Cp^∗ = η⁵-pentamethylcyclopentadienyl) (1a) was obtained by the reaction of the lithium salt of o-C₆H₄N (C₆H₃-Me-p)(CHNHC₆H₃-Me-p) (L₁) with [Cp^∗IrCl(μ-Cl)]₂ in toluene. However, when bulkier ligands (L₂ = o-C₆H₄N(C₆H₃-Me-p)(CHNHC₆H₃-i-Me₂-2,6), L₃ = o-C₆H₄N(C₆H₃-Me-p) (CHNHC₆H₃-i-Pr₂-2,6)) were employed in the same reaction, two 16-electron complexes {Cp^∗Ir[o-C₆H₄N(C₆H₃-Me-p)(CHNC₆H₃-i-Me₂-2,6)]}⁺Cl⁻ (2b) and {Cp^∗Ir[o-C₆H₄N(C₆H₃-Me-p)(CHNC₆H₃-i-Pr₂-2,6)]}⁺Cl⁻ (3b) were formed. A 16-electron complex {Cp^∗Ir [o-C₆H₄N(C₆H₃-Me-p) (CHNC₆H₃-Me-p)]}⁺SO₃ CF⁻₃ (1b) bearing L₁ could be achieved by the reaction of 1a with AgSO₃CF₃ in CH₃CN solution. The molecular structures of 1a and 2b were determined by X-ray crystallography. Theoretical calculations of all the 18/16-electron species were performed to study their bonding characters and electronic properties. Electron donating effect of Cp^∗ and steric effect of anilido-imine ligand were considered as major factors in the formation of coordinative unsaturated complexes 1b, 2b, 3b.