Aldol condensation reactions of [Co(η-C4Ph4){η-C5H4C(O)CH3}]

The aldol condensation reaction between [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CH₃}] and a range of aromatic aldehydes [RCHO] and [RCHCH-CHO] gives a series of α,β-unsaturated ketones [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CHCH-R}] and [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CHCH-CHCH-R}] (3). The reaction is promoted by various bases: NaH proved to be the most effective whilst ⁿBuLi gave [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(OH)(ⁿBu)CH₃}] as the major product. NaOH was ineffective, perhaps indicating that that the methyl protons in [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CH₃}] are less acidic than those in [Fe(η⁵-C₅H₅){η⁵-C₅H₄C(O)CH₃}]. Compounds 3 were characterised spectroscopically. Their ¹H NMR spectra are consistent with a trans configuration about their CC bond, and this was confirmed by X-ray crystallography in five cases, which showed that all have the same basic structure with parallel cyclobutadiene and cyclopentadienyl ligands, but they are not identical. The C₅H₄C(O)(CHCH)_n-R (n = 1 or 2) moieties show little evidence for delocalisation and often deviate from planarity. The UV/Vis spectra of those 3 with smaller aromatic rings (R = C₆H₅, 4-C₆H₄NMe₂, 2-C₄H₃S and 1-C₁₀H₇) suggest that these are donor-π-acceptor systems, but as the annellation of R increases (R = 9-C₁₄H₉, 1-C₁₆H₉ and 1-C₂₀H₁₁) the spectra increasingly resemble those of the parent polycyclic aromatic hydrocarbon, RH. Reduction of [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CHCH-C₁₀H₇-1}] with DIBAL gives a mixture of [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CH₂CH₂-C₁₀H₇-1}] and [Co(η⁴-C₄Ph₄){η⁵-C₅H₄CH(OH)CHCH-C₁₀H₇-1}]. A minor product from the preparation of [Co(η⁴-C₄Ph₄){η⁵-C₅H₄C(O)CH₃}] was shown by X-ray crystallography to be the η⁴-butadiene complex [Co{η⁴-Ph(H)CC(Ph)-C(Ph)C(H)Ph}{η⁵-C₅H₄C(O)CH₃}].     

Palladium (II) complexes with mono-oxide 1,1′-bis(diphenylphosphino)metallocene ligands [Fe(η-C5Me4PPh2)(η-C5Me4P{O}Ph2)] and [Os(η-C5H4PPh2)(η-C5H4P{O}Ph2)]

The monoxides [Fe(η⁵-C₅Me₄PPh₂)(η⁵-C₅Me₄P{O}Ph₂)] (1) and [Os(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄P{O}Ph₂)] (2) have been prepared by treatment of the corresponding diphosphines with CCl₄ and methanol.These ligands react with [Pd(PhCN)₂Cl₂] to give dichloride complexes of different structure.The dimeric complex [{Os(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄P{O}Ph₂)}PdCl(μ-Cl)]₂ (4) contains the monodentate P-coordinated osmocene ligand with the free P{O}Ph₂ group, while the octamethylferrocene ligand gives the chelate k²-P,O complex [{Fe(η⁵-C₅Me₄PPh₂)(η⁵-C₅Me₄P{O}Ph₂)}PdCl₂] (3).The structures of 3 and 4 have been determined crystallographically.Treatment of 3 and 4 with silver salts in CH₂Cl₂ or acetonitrile leads to the corresponding dicationic complexes[{M(η⁵-C₅R₄PPh₂)(η⁵-C₅R₄P{O}Ph₂)}Pd(MeCN)_x]²⁺ (5, M = Fe, R = Me; 6, M = Os, R = H). Complex 5 decomposes upon isolation, in contrast 6 is rather stable, probably due to Os-Pd bonding. The dichlorides 3 and 4 catalyze catalytic amination of p-bromotoluene with N-(4-tolyl)morpholine with lower activity than (dppf)PdCl₂, however they perform comparable to (dppf)PdCl₂ activity in coupling of p-bromotoluene with p-methoxyphenyl boronic acid.     

A synthetic, structural and reactivity study of [(η-C4R4)Co(η-C5H4X)] complexes, R = Me or Et; X = CHO, CHCHFc, CHCH(η-C5H4)Co(η-C4Ph4), CHC(CN)2: Unexpected formation of [(η-cyclopentadienyl)(η-3,4,5,6-tetraethyl-α-pyrone)cobalt]

The tetraethyl- and tetramethyl-cyclobutadiene complexes [(η⁴-C₄R₄)Co(η⁵-C₅H₄CHO)] R = Et, 5, R = Me, 7, and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CO₂Me)] R = Et, 6, R = Me, 8, are conveniently prepared by photolysis of the corresponding isocobaltocenium cations [(η⁴-C₄R₄)Co(η⁶-C₆H₅Me)]⁺ in acetonitrile, and subsequent treatment with Na[C₅H₄CHO] or Na[C₅H₄CO₂Me]. The aldehydes 5 and 7 undergo Wittig and Knoevenagel reactions with [FcCH₂PPh₃]I and CH₂(CN)₂, to form [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=CHFc)] and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=C(CN)₂], 11 and 15, respectively. The Horner-Wittig reaction of [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH₂P(O)(OEt)₂] with [(η⁴-C₄Ph₄)Co(η⁵-C₅H₄CHO)] yields [(η⁴-C₄R₄)Co(η⁵:η⁵-C₅H₄CHCH-C₅H₄)Co(η⁴-C₄Ph₄)], 12 and 13. [(η⁴-C₄Me₄)Co(η⁵-C₅H₄CHO)] also reacts with t-BuLi and FcLi to furnish the corresponding secondary alcohols, 16 and 17, respectively. Surprisingly, the attempted direct synthesis of 5 by reaction of Na[C₅H₅] and ethyl formate with [(η⁴-C₄Et₄)Co(CO)₂I], 1, instead yielded [(η⁵-C₅H₅)Co(η⁴-3,4,5,6-tetraethyl-α-pyrone)], 18, and a mechanistic proposal is advanced. The X-ray crystal structures of 1, 7, 8, 11(Z), 15 and 18, and also the isocobaltocenium salts [(η⁴-C₄Et₄)Co(η⁶-C₆H₅Me)][PF₆], 2, and [(η⁴-C₄Et₄)Co(η⁶-1,3,5-C₆H₃Me₃)][PF₆], 4, are reported.     

Synthesis of the cyclooctadiene and cyclooctenediyl cobalt complexes. Structures of [(η2,η2-cyclooctadiene)Co(η-1,2,4,5-C6H2Me4)]BF4 and [(η1,η3-cyclooctenediyl)Co(η-9-SMe2-7,8-C2B9H10)

Cobaltacarboranes (η¹, η³-cyclooctenediyl)Co(Carb) (Carb = η-9-SMe₂-7,8-C₂B₉H₁₀, η-1-tBuHN-1,7,9-C₃B₈H₁₀) were synthesized by the reaction of the carborane anions [Carb]⁻ with the acetonitrile complex [(η¹, η³-cyclooctenediyl)Co(MeCN)₃]⁺ generated in situ upon the dissolution of [(η¹, η³-cyclooctenediyl)Co(η-1,4-C₆H₄Me₂)]⁺ in MeCN. The structures of (η¹,η³-cyclooctenediyl)Co(η-9-SMe₂-7,8-C₂B₉H₁₀ and [(η²,η²-cyclooctadiene)Co((η-1,2,4,5-C₆H₂Me₄)]BF₄ were determined by X-ray diffraction analysis.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

Synthesis, structures, and catalytic properties for ethylene polymerization of bridged [η,η-C5H4CHPhArO]TiCl2 complexes

A number of bridged half-sandwich titanium complexes [η⁵:η¹-2-C₅H₄CHPh-4-R¹-6-R²C₆H₂O]TiCl₂ [R¹ = H (5), Me (6), ^tBu (7, 8); R² = H (6, 7), ^tBu (5, 8)] were synthesized from the reaction of their corresponding trimethylsilyl substituted ligand precursors 2-Me₃SiC₅H₄CHPh-4-R¹-6-R²C₆H₂OSiMe₃ [R¹ = H (1), Me (2), ^tBu (3, 4); R² = H (2, 3), ^tBu (1, 4)] with TiCl₄ in hexane. All new complexes were characterized by ¹H and ¹³C NMR spectroscopy. Molecular structures of complexes 5 and 8 were determined by single crystal X-ray diffraction analysis. Upon activation with AlⁱBu₃/Ph₃CB (C₆F₅)₄, complexes 5-8 exhibit reasonable catalytic activity for ethylene polymerization and copolymerization with 1-hexene, producing polyethylene and poly(ethylene-co-1-hexene) with moderate molecular weights.     

Effect of high external pressures on the vibrational spectra of Zeise’s complexes, K[Pt(η-C2H4)Cl3] and [Pt(η-C2H4)Cl2]2

The pressure dependences (dν/dP) of the main IR and Raman bands of Zeise’s complexes, K[Pt(η²-C₂H₄)Cl₃] and [Pt(η²-C₂H₄)Cl₂]₂, have been determined for the first time for selected pressures up to ∼33 kbar with the aid of diamond-anvil cells. Neither complex undergoes a pressure-induced structural change throughout the pressure range investigated. The dν/dP values range from −0.13 to 0.79 cm⁻¹ kbar⁻¹. The negative values have proved particularly informative in identifying the location of the CC stretching modes of the Pt-ethylene groups, a topic of considerable disagreement in the literature.     

An NMR study of the rotational barriers in cobalt-stabilized carbocations: X-ray crystal structures of (η-C4Ph4)Co-(η-C5H4R), where R is CH3CO, CHO, CH(Bu)OH

Treatment of the aldehyde (η⁴-C₄Ph₄)Co(η⁵-C₅H₄-CHO) (4b) with tert-butyllithium or phenyllithium yields the secondary alcohols (η⁴-C₄Ph₄)Co(η⁵-C₅H₄-CH(R)OH), where R=tert-butyl (5) or phenyl (6). Protonation of 5 and 6 at −80 °C furnishes the deep purple, cobalt-stabilized cations, 7 and 8, respectively, both of which exhibit restricted rotation about the external C₅H₄-CHR⁺ linkage on the NMR time-scale. These data indicate a minimum value for the barrier to rotation of 15 kcal mol⁻¹, but it is certainly much higher, indicating a considerable degree of C-C double bond character. X-ray crystal structures of 4b, 5 and also of the ketone (η⁴-C₄Ph₄)Co(η⁵-C₅H₄-C(O)CH₃ (4a) are reported. The secondary alcohol 5 exhibits disorder in the solid state because of the presence of diastereomers as a consequence of the stereogenic center at the α-carbon and the clockwise or anticlockwise propeller orientations of the tetraphenylcyclobutadiene ligand.     

Synthesis and reactivity of η-tetramethylcyclopentadienyl-propenyl rhenium complexes: Molecular structure of [(η:η-C5Me4CH2CHCH2)Re(CO)2]

The fulvene complexes [(η⁶-C₅Me₄CH₂)Re(CO)₂(R)] (1a, RI; 1b, RC₆F₅) react at the exocyclic methylene carbon with a vinylmagnesium bromide solution to produce the anionic species [(η⁵-C₅Me₄CH₂CHCH₂)Re(CO)₂(R)]⁻. Protonation with HCl at 0 °C produces the hydride complexes [trans-(η⁵-C₅Me₄CH₂CHCH₂)Re(CO)₂(R)(H)] (2a, RI; 2b, RC₆F₅). Thermolysis of an hexane solution of the iodo-hydride (2a) under a CO atmosphere yields the complex [(η⁵-C₅Me₄CH₂CHCH₂)Re(CO)₃] (3) and [Re(CO)₅I] as by-product. Thermolysis of 2b produced three new products, mainly the chelated complex [(η⁵:η²-C₅Me₄CH₂CHCH₂)Re(CO)₂] (4) and complex 3, with a non-coordinated olefin group, in moderated yield, and traces of [Re(CO)₅(C₆F₅)]. Thermolysis of an hexane solution of 2 in presence of an excess of PMe₃, afforded the phosphine derivative [(η⁵-C₅Me₄CH₂CHCH₂)Re(CO)₂(PMe₃)] (5). All the complexes were characterized by IR, ¹H, ¹³C and ³¹P NMR spectroscopies and mass spectrometry. The molecular structure of 4 has also been determined. The molecule exhibits a formal three-legged piano-stool structure, with two CO groups, and the third position corresponding to the η²-coordination of the propenyl side arm of the η⁵-C₅Me₄ ring.     

Atom-transfer radical reactions catalyzed by a coordinatively unsaturated diruthenium amidinate, [(η-C5Me5)Ru(μ2-i-PrNC(Me)Ni-Pr)Ru(η-C5Me5)]

Atom-transfer radical cyclization (ATRC) and addition (ATRA) catalyzed by a coordinatively unsaturated diruthenium amidinate complex 4, [(η⁵-C₅Me₅)Ru(μ₂-i-PrNC(Me)Ni-Pr)Ru(η⁵-C₅Me₅)]⁺, are investigated, and their features are compared with those of atom-transfer radical polymerization (ATRP). As an example of ATRC, a cationic diruthenium amidinate 4 is found to exhibit excellent catalytic reactivity for the cyclization of N-allyl α-halogenated acetamides including an alkaloid skeleton at ambient temperature. A catalytic species generated in situ from a halide complex, (η⁵-C₅Me₅)Ru(μ₂-i-PrNC(Me)Ni-Pr)Ru(η⁵-C₅Me₅)(X) [X=Cl, Br] and sodium salts of weakly coordinating anions such as NaPF₆ and NaBPh₄ also shows high catalytic activity; this actually provides a solution for a problematic instability of 4 as the practical catalyst. The in situ-generated catalyst species 4 is also active towards the intermolecular ATRA of α,α,γ-trichlorinated γ-lactam with alkenes at rt to afford the corresponding α-alkylated γ-lactams in moderate yields. Examination of ATRP of methyl methacrylate (MMA) showed that both the isolated 4 [Y=PF₆] and in situ-generated 4 [Y=PF₆] are effective for the polymerization of MMA in the presence of 2-bromoisobutylate as the initiator. Use of the isolated catalyst results in controlled polymerization at initial stage of the reaction; in contrast, the polymerization with in situ-generated catalyst produces poly(MMA) with wide molecular weight distribution. The isolated catalyst 4 is powerful for the activation of a C-Br bond of macromolecule initiators; BrCMe₂CO₂[O(CH₂)₄]_n-n-Bu (M_n=3800; M_w/M_n=1.2) initiated ATRP of MMA even at 25 °C to afford the poly(THF)-poly(MMA) block copolymer of M_n=26,000 and M_w/M_n=1.2 with the aid of 4. The roles of the coordinatively unsaturated ruthenium species for these reactions are discussed.     

(Cyclopentadienyl){(N,N-dimethylaminoethyl)cyclopentadienyl} complexes of zirconium: Crystal structure of [(η-C5H5)(η-C5H4CH2CH2NHMe2)ZrCl2]2[ZrCl6]

[(η⁵-C₅H₅)ZrCl₃] reacts with [C₅H₄CH₂CH₂NMe₂]Li yielding the coordination polymer [(C₅H₅)(C₅H₄CH₂CH₂NMe₂)ZrCl₂]_n (1) as a brown solid which is very sensitive to moisture. The reaction of 1 with 1.35 equivalent of HCl (methanolic solution) yields pale yellow green crystals of [(η⁵-C₅H₅)(η⁵-C₅H₄CH₂CH₂NHMe₂)ZrCl₂]₂[ZrCl₆] (2). Compound 2 was fully characterized on the basis of NMR data and X-ray crystal structure analysis. The formation of this product indicates the elimination of C₅H₄CH₂CH₂NMe₂ as well as C₅H₅ ligands from the Zr(IV) metal centre.     

Cyclopentadienyl chromium and tungsten complexes with halide, methyl and σ-phenylethynyl ligands: Structures of (η-C5H5)Cr(NO)2(-CC-C6H5), (η-C5H5)Cr(NO)2I and [(η-C5H4)-COOCH3]W(CO)3Cl

With copper(I) iodide as catalyst, σ-alkynyls, compounds (η⁵-C₅H₅)Cr(NO)₂(CC-C₆H₅) (5), [(η⁵-C₅H₄)-COOCH₃]Cr(NO)₂(CC-C₆H₅) (10), and [(η⁵-C₅H₄)-COOCH₃]W(CO)₃(CC-C₆H₅) (13), were prepared from their corresponding metal chloride 1, 6 and 12. Structures of compound 3, 5 and 12 have been solved by X-ray diffraction studies. In the case of 5, there is an internal mirror plane passing through the phenylethynyl ligand and bisecting the Cp ring. The phenyl group is oriented perpendicularly to the Cp with an eclipsed conformation. The twist angle is 0° and 118.4° for -CC-Ph and two NO ligands, respectively. The orientation is rationalized in terms of orbital overlap between ψ₃ of Cp, dπ of Cr atom, and π^∗ of alkynyl ligand, and complemented by molecular orbital calculation. The opposite correlation was observed on the chemical shift assignments of C(2)-C(5) on Cp ring in compounds 6 and 12, using HetCOR NMR spectroscopy. The electron density distribution in the cyclopentadienyl ring is discussed on the basis of ¹³C NMR data and compared with the calculations via density functional B3LYP correlation-exchange method.     

Reactions of nickel-group 6 complexes with a bulky terminal alkyne to afford alkyne-carbonyl coupled products: X-ray structure of the heterobimetallic nickelacyclobutenone complex [(η-C5Me5)Mo(CO)2(η-C5H4Me)] (Ni-Mo)

The nickel-molybdenum complex [(η⁵-C₅Me₅)NiMo(CO)₃(η⁵-C₅H₄Me)] can be considered to contain a partially dative nickel-molybdenum double bond. This complex reacts with the bulky terminal alkyne HCCCPh₂(OMe) (DPMP) to afford the alkyne-carbonyl coupled metallacyclic product (3c, R = CPh₂(OMe), Ni-Mo) regioselectively and exclusively. No traces of a nickel-molybdenum μ-alkyne complex, analogous to similar complexes isolated with less bulky alkynes, were observed. The structure of complex 3c was established via a single crystal X-ray diffraction study. It exhibits the same connectivity as that observed with a related complex formed with the smaller but-2-yne, but some significant differences are observed between the two structures. Reactions of the nickel-molybdenum and -tungsten species [(η⁵-C₅Me₅)NiM(CO)₃(η⁵-C₅H₅)] (M = Mo, W) with DPMP proceeded analogously and afforded similar products.     

New ferrocenylmethylphosphines - Preparation, characterisation and coordination chemistry of PH(CH2Fc)2, P(CH2Fc)3 [Fc = Fe(η-C5H5)(η-C5H4)] and their derivatives

The new ferrocenylmethylphosphines PH(CH₂Fc)₂ (1) [Fc = Fe(η⁵-C₅H₅)(η⁵-C₅H₄)] and P(CH₂Fc)₃ (2) and the phosphonium salt [P(CH₂Fc)₃(CH₂OH)]I (3) were synthesised from P(CH₂OH)₃ and [FcCH₂NMe₃]I. [P(CH₂Fc)(CH₂OH)₃]Cl (4) was obtained from P(CH₂Fc)(CH₂OH)₂, CH₂O and HCl. The new phosphines and phosphonium salts were fully characterised by NMR and IR spectroscopy and MS. [Mo(CO)₆] reacts with 1 to give [Mo(CO)₅{PH(CH₂Fc)₂}] (5) in high yield, but attempts to employ 2 as a ligand failed. The reaction of [P(CH₂Fc)₃(CH₂OH)]I (3) and [PH(CH₂Fc)₃]I (obtained in situ from 3 and Na₂S₂O₅) with [WI₂(CO)₃(NCMe)₂] gave the complex salts [P(CH₂Fc)₃(CH₂OH)][WI₃(CO)₄] (6) and [PH(CH₂Fc)₃][WI₃(CO)₄] (7), respectively. [P(CH₂Fc)₄]I (8) was synthesized from PH₂CH₂Fc and [FcCH₂NMe₃]I. Crystal structures were obtained for 1, 3-8.     

Protonation of the lithio derivatives of the 1,2,4-tri-phosphaferrocenes, [LiFe(η-P2C2Bu2PBu)(η-C5R5)] (R = H, Me): Crystal and molecular structure of [Fe(η-P3C2Bu2BuH)(η-C5Me5)]

A new synthetic route is described to generate the 4-centre-5 electron donor ring system (P₃C₂^tBu₂BuH), via protonation of the lithium salts [LiFe(η⁴-P₂C₂^tBu₂PBu)(η⁵-C₅R₅)] (R = H, Me). The molecular structure of [Fe(η⁴-P₃C₂^tBu₂BuH)(η⁵-C₅R₅)] (R = Me) has been determined by a single crystal X-ray study.     

Cyclopalladation of N-phenyl-4-ferrocenylmethylpyrazoles: Crystal structure of [Pd{κ-C,N-C6H4-1-[(3,5-Me2-C3N2)-CH2-(η-C5H4)Fe(η-C5H5)]}Cl(PPh3)] · CH2Cl2

The synthesis and characterization of pyrazole derivatives of general formula [C₆H₄-4-R-1-{(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}] [R = OMe (1a) or H (1b)] with a ferrocenylmethyl substituent are described.The study of the reactivity of compounds 1 with palladium(II) acetate has allowed the isolation of complexes (μ-AcO)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (2) [R = OMe (2a) or H (2b)] that contain a bidentate [C(sp², phenyl), N]⁻ ligand and a central “Pd(μ-AcO)₂Pd” unit.Furthermore, treatment of 2 with LiCl produced complexes (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (3) [R = OMe (3a) or H (3b)] that arise from the replacement of the acetato ligands by the Cl⁻.Compounds 2 and 3 also react with PPh₃ giving the monomeric complexes [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}X(PPh₃)] {X⁻ = AcO⁻ and R = OMe (5a) or H (5b) or X⁻ = Cl⁻ and R = OMe (6a) or H (6b)}, where the phosphine is in a cis-arrangement to the metallated carbon atom. Treatment of 3 with thallium(I) acetylacetonate produced [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}(acac)] (7) [R = OMe (7a) or H (7b)]. Electrochemical studies of the free ligands and the cyclopalladated complexes are also reported. The dimeric complexes 3 also react with MeO₂C-CC-CO₂Me (in a 1:4 molar ratio) giving [Pd{(MeO₂C-CC-CO₂Me)₂C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}Cl] (8) [R = OMe (8a) or H (8b)], which arise from the bis(insertion) of the alkyne into the σ{Pd-C(sp², phenyl)} bond of 3.     

Synthesis, characterization and catalytic behaviour of ansa-zirconocene complexes containing tetraphenylcyclopentadienyl rings: X-ray crystal structures of [Zr{Me2Si(η-C5Ph4)(η-C5H3R)}Cl2] (R = H, Bu)

The ansa-bis(cyclopentadiene) compounds, Me₂Si(C₅HPh₄)(C₅H₄R) (R = H (2); Bu^t (3)), have been prepared by the reaction of C₅HPh₄(SiMe₂Cl) (1) with Na(C₅H₅) or Li(C₅H₄Bu^t), respectively, and transformed to the di-lithium derivatives, Li₂{Me₂Si(C₅Ph₄)(C₅H₃R)} (R = H (4); Bu^t (5)), by the action of n-butyllithium. The ansa-zirconocene complexes, [Zr{Me₂Si(η⁵-C₅Ph₄)(η⁵-C₅H₃R)}Cl₂] (R = H (6); Bu^t (7)), were synthesized from the reaction of ZrCl₄ with 4 or 5, respectively. Compounds 6 and 7 have been tested in the polymerization of ethylene and compared with their methyl-substituted analogues, [Zr{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₃R)}Cl₂] (R = H (8); Bu^t (9)). Whilst 8 and 9 are catalytically active, the tetraphenyl-substituted complexes 6 and 7 proved to be inactive in the polymerization of ethylene. This phenomenon has been explained by DFT calculations based on the reaction intermediates in the polymerization processes involving 6 and 7, which showed that the extraction of a methyl group from the zirconocene complex to form the cationic active specie is endothermic and therefore unfavourable.