Formation and structural characterization of novel polynuclear palladium selenolato complexes [Pd3Se(SePh)3(PPh3)3]Cl and [Pd6Cl2Se4(SePh)2(PPh3)6]

In addition to well-known dinuclear phenylselenolato palladium complexes, the reaction of [PdCl₂(PPh₃)₂] and NaSePh affords small amounts of novel trinuclear and hexanuclear complexes [Pd₃Se(SePh)₃(PPh₃)₃]Cl (1) and [Pd₆Cl₂Se₄(SePh)₂(PPh₃)₆] (2). Complex 1 is triclinic, P1?, a=13.6310(2), b=16.2596(2), c=16.9899(3) Å, α=83.1738(5), β=78.9882(5), γ=78.7635(5)°. Complex 2 is monoclinic, C2/c, a=25.7165(9), b=17.6426(8), c=27.9151(14) Å, β=110.513(2)°. There are no structural forerunners for 1, but the hexanuclear complex 2 is isostructural with [Pd₆Cl₂Te₄(TeR)₂(PPh₃)₆] (R=Ph, C₄H₃S) that have been observed as one of the products in the oxidative addition of R₂Te₂ to [Pd(PPh₃)₄]. Mononuclear palladium complexes may play a significant role as building blocks in the formation of the polynuclear complexes.     

Improved syntheses of Ru(CO)2 (O3SCF3)2 (bidentate) complexes and their conversion into new [Ru(CO)2 (bidentate)2]2+ complexes

Reaction of the complexes Ru(CO)₂Cl₂L [L = 2,2′-bipyridyl (bpy) or 1,10-phenanthroline (phen)] with trifluoromethanesulphonic acid under carefully controlled conditions yields Ru[cis-(CO)₂] [cis-(O₃SCF₃)₂] (bidentate complexes. From reactions of the trifluoromethanesulphonates with the appropriate bidentate ligands, the new complexes [cis-Ru(CO)₂-L(L′)]²⁺ (L as above; L′ = 4,4′-dimethyl-2,2′-bipyridyl or 4,4′-diisopropyl-2,2′-bipyridyl) as well as the known [_cis-Ru(CO)₂L₂]²⁺ and [cis-Ru(CO)₂bpy(phen)]²⁺ have been prepared.     

Synthesis and characterisation of the platinum complexes [PtCl(CClPAr)(PPh3)2] and [PtCl(CClPAr′)(PPh3)2] as potential intermediates in the preparation of phosphaalkynes

Oxidative addition reactions of Cl₂CPR (R = 2,4,6-tris(trifluoromethyl)phenyl (Ar) or 2,6-bis(trifluoromethyl)phenyl (Ar′) with Pt(PPh₃)₄ yield the cis and trans (at platinum) complexes [PtCl(ClCPAr)(PPh₃)₂] and [PtCl(ClCPAr′)(PPh₃)₂]. All starting materials and intermediates have been characterised by NMR spectroscopy. The crystal and molecular structures of the trans-platinum complexes have been determined by single-crystal X-ray diffraction at low temperature.     

35Cl NQR and 1H NMR studies of [C(NH2)3]AuCl4, [C(NH2)3]2PtCl4, and [C(NH2)3]2PdCl4

The temperature dependence measurements of ³⁵Cl NQR frequencies and ¹H NMR spin-lattice relaxation time T₁ were carried out for guanidinium tetrachloro-aurate(III), -platinate(II), and -palladate(II). The gold(III) complex showed four NQR lines at various temperatures between 77 and 344 K, while the platinum-(II) and palladium(II) complexes gave two NQR lines in the temperature ranges 77–169 K and 77–220 K, respectively. An unusual phase transition was located at 363 K for the gold(III) complex. The high-temperature phase was easily supercooled. All the complexes studied yielded a T₁ minimum attributable to the reorientation of the planar cation about its C₃ axis. The motional parameters were evaluated. The Zeeman-quadrupole cross relaxation between protons and chlorine nuclei was observed for the platinum(II) and palladium(II) complexes at various temperatures below room temperature, while it was also detected for the high-temperature phase of the gold(III) complex.     

Density functional studies of influences of Ni triad metals and solvents on oxidative addition of MeI to [M(CH3)2(NH3)2] complexes and C-C reductive elimination from [M(CH3)3(NH3)2I] complexes

Three metal square planar complexes of the type [M(CH₃)₂(NH₃)₂] (M = Ni, Pd, Pt), with a systematic variation in the metals, are chosen to investigating their S_N2-type oxidative addition reactions with methyl iodide by using the B3LYP levels of theory. The oxidative addition was found to take place via a transition state with a nearly linear arrangement of the I-CH₃-M moiety. Solvation effects in these oxidative addition reactions were also investigated. Considering the nature of the metal centre and solvation effects, the following conclusions emerge: (i) addition of MeI is exothermic for all three metals, and Pt is predicted to react with a much lower barrier than either Pd or Ni. The results describe that the MeI addition would be expected to be more favourable with the complex bearing the third-row metal (platinum) as compared to the other triad metals, nickel or palladium, in which case a more strongly bound MeI adduct is formed with a lower activation barriers and the reaction being more exothermic; (ii) the reaction is very difficult to occur in low polar solvents, such as benzene, due to the high barrier which is induced by dissociation of iodide anion from methyl group, but the reaction easily occurs in polar solvents, such as acetonitrile; this is attributed to the ability of polar solvents to solvate and therefore stabilize the related polar intermediate ion pair. Ethane reductive elimination from the M(VI) complexes fac-[M(CH₃)₃(NH₃)₂I] were also studied, indicating that the Ni(IV) and Pd(IV) complexes are very prone to undergo the reductive elimination while the Pt(IV) analogous is less reactive towards the reductive elimination. The results indicate that in contrast to the Me-Me reductive elimination, the S_N2 oxidative addition reaction of MeI to M(II) is much less sensitive to the nature of the metal centre, suggesting that the nucleophilicity of M(II) in [M(CH₃)₂(NH₃)₂] does not change significantly as one moves from M = Ni to Pt.     

Structures Of Tetraammine Salts [Pt(NH3)4](N03)2, [Pd(NH3)4](N03)2, and [Pd(NH3)4]F2 H20

This contribution presents the results of a single crystal X-ray diffraction study of three ammine complexes of bivalent platinum and palladium: [Pt(NH₃)₄](N0₃)2, [Pd(NH₃)₄](N0₃)₂ and [Pd(NH₃)₄]F₂H₂O. The first two compounds are isostructural; metal atoms are located on inversion centers, all other atoms are in general positions. A three-dimensional framework is built from planar-square complex cations and nitrate ions joined by N-H...O hydrogen bonds. In [Pd(NH₃)₄]F₂H₂O, palladium atoms, as in the previous cases, are located on inversion centers, while oxygen atoms of water molecules are on the two-fold symmetry axis. A network of strong N-H...F and O-H...F hydrogen bonds linking the cations, anions, and crystallization water molecules is present in the structure.     

The thermal dissociation of the [Co(en)3](SCN)3 and [Co(en)3]I3 complexes

The thermal dissociation of the [Co(en)₃](SCN)₃ and [Co(en)₃]I₃ complexes was studied by thermogravimetry, differential thermal analysis, thermomagnetic analysis, pyrolytic techniques, evolved gas analysis, and mass spectrometry, in vacuo and nitrogen atmospheres. It was found that the [Co(en)₃](SCN)₃ complex dissociated in four steps:

It was not possible to elucidate the intermediate compounds formed in the thermal dissociation of the [Co(en)₃]I₃ complex.     

Synthesis,characterization and antimicrobial studies of mixed ligand silver(I) complexes of thioureas and triphenylphosphine; crystal structure of {[Ag(PPh3)(thiourea)(NO3)]2·[Ag(PPh3)(thiourea)]2(NO3)2}

Mixed ligand silver(I) complexes of triphenylphosphine and thioureas (thiourea (Tu), N-methylthiourea (Metu), N,N′-dimethylthiourea (Dmtu) and N,N′-diethylthiourea (Detu)) with the general formulae, [(Ph₃P)₂Ag(thione)]NO₃ and [(Ph₃P)Ag(thione)₂]NO₃, have been prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. The crystal structure of one of them has been determined by X-ray crystallography. The spectral data of the complexes are consistent with sulfur coordination of the thiones to silver(I). The single crystal X-ray structure of complex 1, {[Ag(PPh₃)(thiourea)(NO₃)]₂·[Ag(PPh₃)(thiourea)]₂(NO₃)₂}, shows that the complex consists of two independent centrosymmetric binuclear units, each having the silver atoms coordinated to one PPh₃ and two bridging thiourea molecules. In one of the independent units the silver atom is additionally bound to a nitrate ion, leading to a tetrahedral geometry, while in the other unit the silver atom adopts a trigonal planar environment. Antimicrobial activities of the complexes were evaluated by their minimum inhibitory concentration and the results showed that the complexes show a wide range of activity against two gram-negative bacteria (Escherichiacoli, Pseudomonasaeruginosa) and molds (Aspergillusniger, Penicilliumcitrinum), while the activities were poor against yeasts (Candidaalbicans, Saccharomycescerevisiae). However, the title complex did not show activity against any tested microorganism.     

Structure and bonding in a series of cyano complexes: RuCp(PPh3) 2CN, [RuCp(PPh3) 2(CNH)]CF3SO3, and H-bridged [Ru2(Cp) 2(PPh3) 4CNHNC]CF3SO3

The three title cyanoruthenium complexes have been characterized by means of X-ray diffraction analysis, IR and NMR solution spectroscopies, as well as extended Hückel molecular orbital calculations examining the properties of the cyanide fragment changing with complexation and with the co-ligands Cp and PPh₃. Explanations are given for crystallographic results of the C-N bond shortening upon complexation, the supershort (2.573 Å) bond length of N(H) N in the bridged complex, as well as the Ru-C-N and C-N-H-N-C bendings. Although the crystallographically found asymmetry of coordinated Cp is not significant, the MO calculations suggest a distorted endocyclic bond-length pattern indicative of the relative importance of σ and π bonding in the metalcyclopentadienyl interactions.     

Acyl-platinum(II) and -palladium(II) complexes derived from 2-hydroxybenzaldehyde derivatives. X-ray structure of [Pt(OC6H4CO) (P(p-CH3C6H4)3)2]

Platinum(II) and palladium(II) complexes containing chelating acyl ligands have been synthesized from salicylaldehyde, 2-hydroxynaphthaldehyde and 2-hydroxy-3-methoxybenzaldehyde. The platinum(II) complexes [Pt(acyl)L₂], acyl  OC₆H₄CO, OC₁₀H₆CO, O(m-CH₃OC₆H₃CO), L  tertiary phosphine, 1/2 diphenylphosphinoethane, can be isolated with both monodentate and chelating diphosphines, whereas for palladium only the compounds with chelating phosphines are readily obtainable. The reactions of [Pt(OC₆H₄CO)L₂] with HCl afford trans-[PtCl(OHC₆H₄CO)L₂], L  monodentate tertiary phosphine and cis-[PtCl(OHC₆H₄CO)L₂], L2  1,2-bis-diphenylphosphinoethane, in which the metal—carbon bond remains intact. The structure of [Pt(OC₆H₄CO)-(P(p-CH₃C₆H₄)₃)₂] has been determined by X-ray diffraction methods and found to have the expected square planar structure. Some relevant bond lengths and angles are: PtP; 2.271(4) and 2.348(5) Å; PtC; 1.96(2) Å and PtO; 2.07(1) Å; PPtP  101°, CPtO  82°.     

Anion effect on the thermolysis of double complexes [Co(NH3)6][Fe(CN)6] and [Co(NH3)6]4[Fe(CN)6]3

The thermolysis of complexes [Co(NH₃)₆][Fe(CN)₆] and [Co(NH_{3 6}]₄[Fe(CN)₆]₃ under an air or hydrogen atmosphere at 200, 350, and 500°C is studied. The composition and properties of thermolysis products are determined. The oxidative thermolysis yields mixtures of oxides of the central metals; the reductive thermolysis yields intermetallic compounds CoFe. The density of the complexes and the specific surface area of the intermetallic compounds are measured. Average particle sizes are calculated. The morphology and dispersion of the powders are dictated by the shape and density of the crystals of the precursor double salts and the thermolysis temperature. The thermolysis chemism in the oxidative and reductive atmospheres is discussed in the context of the nature of the complex anion. Original Russian Text ? S.I. Pechenyuk, D.P. Domonov, D.L. Rogachev, A.T. Belyavskii, 2007, published in Zhurnal Neorganicheskoi Khimii, 2007, Vol. 52, No. 7, pp. 1110–1115.     

Synthesis, characterization and molecular structures of allenylidene, vinylidene-alkylidene complexes containing [CpOs(PPh3)2] fragment

The reaction of [CpOs(PPh₃)₂Br] with diphenylpropargylic alcohol HCCCPh₂(OH) in the presence of ammonium hexafluorophosphate leads to the formation of cationic osmiumallenylidene complex [CpOs(CCCPh₂)(PPh₃)₂][PF₆] (1), but when the dimethylpropargylic alcohol HCCCMe₂(OH) was used as a substrate, a dicationic diosmium vinylidene-alkylidene complex of the formula [(CpOs)₂(μ-C₁₀H₁₂)(PPh₃)₄][PF₆]₂ (2) was obtained. The structures of these complexes have been determined by X-ray diffraction. Complex 1 crystallizes in monoclinic space group P21/c with a=13.4083(6) Å, b=19.5700(9) Å, c=20.3806(9) Å and β=100.3620(10)°. Complex 2 crystallizes in triclinic space group with a=13.0396(11) Å, b=15.2420(13) Å, c=21.6406(19) Å and α=72.5290(10)°, β=75.1960(10)°, γ=85.6360(10)°.     

Effect of ligands on the thermolysis of the double complexes [Co(NH3)6]2C2O4[Cu(C2O4)2]2 and [Co(NH3)6]Cl[Cu(C7H4O3)2]

The thermolysis of the complexes [Co(NH₃)₆]₂C₂O₄[Cu(C₂O₄)₂]₂ (I) and [Co(NH₃)₆]Cl[Cu(C₇H₄O₃)₂] (II) in air and hydrogen at 200, 350, and 500°C and the composition and properties of the thermolysis products are considered. The oxidative thermolysis of the complexes yields mixtures of cobalt and copper oxides, including mixed ones. The reductive thermolysis of the complexes yields a Co + Cu bimetallic powder in the case of compound I and a Co + Cu + C powder in the case of compound II. The thermal behavior of the complexes is governed by the nature of the ligand coordinated to the copper atom. The observed data are explicable in terms of the properties of this ligand. The chemistry of the oxidative and reductive thermolysis is discussed. Original Russian Text ? D.P. Domonov, S.I. Pechenyuk, N.L. Mikhailova, A.T. Belyaevskii, 2007, published in Zhurnal Neorganicheskoi Khimii, 2007, Vol. 52, No. 7, pp. 1104–1110.     

Synthesis of [Ru(CO)2(PPh3)(SP)] and [Ru(CO)(PPh3)2(SP)] and their catalytic activities for the hydroamination of phenylacetylene

The reaction of [Ru(CO)₂(PPh₃)₃] (1) with o-styryldiphenylphophine (SP) (2) gave [Ru(CO)₂(PPh₃)(SP)] (3) in 83% yield. This styrylphosphine ruthenium complex 3 can also be synthesized by the reaction of [Ru(p-MeOC₆H₄NN)(CO)₂(PPh₃)₂]BF₄ (4) with NaBH₄ and 2 in 50% yield. When “Ru(CO)(PPh₃)₃” generated by the reaction of [RuH₂(CO)(PPh₃)₃] (8) with trimethylvinylsilane reacted with 2, [Ru(CO)(PPh₃)₂(SP)] (10) was produced in moderate yield as an air sensitive solid. The spectral and X-ray data of these complexes revealed that the coordination geometries around the ruthenium center of both complexes corresponded to a distorted trigonal bipyramid with the olefin occupying the equatorial position and the C-C bonding in the olefin moiety in 3 and 10 contained a significant contribution from a ruthenacyclopropane limiting structure. Complexes 3 and 10 showed catalytic activity for the hydroamination of phenylacetylene 11 with aniline 12. Ruthenium complex 3 in the co-presence of NH₄PF₆ or H₃PW₁₂O₄₀ proves to be a superior catalyst system for this hydroamination reaction. In the case of the reaction using H₃PW₁₂O₄₀ as an additive, ketimines (13) was obtained in 99% yield at a ruthenium-catalyst loading of 0.1 mol%. Some aniline derivatives such as 4-methoxy, 4-trifluoromethyl-, and 4-bromoanilines can also be used in this hydroamination reaction.     

Mononuclear Pt(II) and Pd(II) 1,4-dithiolato complexes. Crystal structures of [Pt((−) DIOS) (PPh3)2] and [Pd(S(CH2) 4S)(Ph2P(CH2) 3PPh2)]. Application in styrene hydroformylation

Addition of 1,4-dithiols to dichloromethane solutions of [PtCl₂(P-P)] (P-P = (PPh₃)₂, Ph₂P(CH₂)₃PPh₂, Phd₂P(CH₂)₄PPh₂; 1,4-dithiols = HS(CH₂)₄SH, (−)DIOSH₂ (2,3-O-isopropylidene-1,4-dithiol-l-threitol), BINASH₂ (1,1′-dinaphthalene-2,2′-dithiol)) in the presence of NEt₃ yielded the mononuclear complexes [Pt(1,4-dithiolato)(P-P)]. Related palladium(II) complexes [Pd(dithiolato)(P-P)] (P-P=Ph₂P(CH₂)₃PPh₂, Ph₂P(CH₂)₄PPh₂; dithiolato = ⁻S(CH₂)₄S⁻, (−)-DIOS) were prepared by the same method. The structure of [Pt((−)DIOS)(PPh₃)₂] and [Pd(S(CH₂)₄S)(Ph₂P(CH₂)₃PPh₂)] complexes was determined by X-ray diffraction methods. Pt—dithiolato—SnC1₂ systems are active in the hydroformylation of styrene. At 100 atm and 125°C [Pt(dithiolate)(P-P)]/SnCl₂ (Pt:Sn = 20) systems provided aldehyde conversion up to 80%.     

Syntheses and X-ray crystallographic studies of {[Ni(en)2(pot)2]0.5CHCl3} and [Ni(en)2](3-pytol)2

Two novel Ni(II) complexes {[Ni(en)₂(pot)₂]0.5CHCl₃} (3) {pot = 5-phenyl-1,3,4-oxadiazole-2-thione} (1) and [Ni(en)₂](3-pytol)₂ (4) {3-pytol = 5-(3-pyridyl)-1,3,4-oxadiazole-2-thiol} (2) have been synthesized using en as coligand. The metal complexes have been characterized by physical and analytical techniques and also by single crystal X-ray studies. The complexes 3 and 4 crystallize in monoclinic system with space group P21/a and P121/c, respectively. The complex 3 has a slightly distorted octahedral geometry with trans (pot)⁻ ligands while 4 has a square planar geometry around the centrosymmetric Ni(II) center with ionically linked trans (3-pytol)⁻ ligands. The π?π (face to face) interaction plays an important role along with hydrogen bondings to form supramolecular architecture in both complexes.     

The thermal dissociation of the [Co(NH3)6]Cl3 and [Co(NH3)6]Br3 complexes in vacuo

The thermal dissociation of the complexes, [Co(NH₃)₆]X₃(X^?=Cl, Br), was studied in vacuo using the techniques of thermogravimetry, evolved gas analysis and mass spectrometric analysis. It was found that the reaction stoichiometry was identical to that previously determined in air but that the type of intermediate compounds formed were different. The dissociation occurred by the reactions:

     

Some transesterification reactions of [Ir(CO2Me)(CO)2(PPh3)2]

The iridium(I) complex [Ir(CO₂Me)(CO)₂(PPh₃)₂] undergoes a transesterification reaction with the alcohols CH₂C(R)CH₂OH (R = H, Me), MeCCCH₂CH₂OH, and HOCH₂CH₂OH to afford the complexes

[Ir(CO₂CH₂CH₂CMe)(CO)₂(PPh₃)₂] and [Ir(CO₂CH₂CH₂OH)(CO)₂(PPh₃)₂], respectively. In contrast the acetylenic alcohol HCCCH₂CH₂OH gives [Ir(CCCH₂CH₂OH)(CO)PPh₃)₂]. Some reactions of the new complexes are described.     

Bond energies and thermal decomposition of [Pt(X)(CH3)(P(C2H5)3)2] complexes

The thermal decomposition of the complexes trans-[Pt(X)(CH₃)L₂] (L  P(C₂H₅)₃; X  Cl, Br, I, CN) in decalin at 170 and 200°C affords methane platinum metal and [Pt(X)₂L₂]. The kinetics of the decomposition of the complexes were determined by monitoring the appearance of methane by GLC. The observed first-order rate constant was found to be independent on the nature of the ligand X. The thermal decomposition of the trideuteriomethyl complexes [Pt(X)(CD₃)L₂] (X  I, CN) in decalin-d₁₈ at 170 and 200°C was studied by GLC/MS. The thermolysis affords CD₃H and CD₄ in ratios which are independent of the nature of X and of the temperature used. The mass spectra of the complexes were also examined. A relative scale of platinum-to-methyl bond dissociation energies has been established by measuring the appearance potential of the fragment ion [Pt(X)L₂]⁺ and the ionization energies in the series [Pt(X)(CH₃)L₂]. Ionization potentials and PtCH₃ bond energies show a clear dependence on the nature of X which is not reflected in corresponding changes in the decomposition rates.     

The reaction of trihydrobistriphenylphosphine iridium IrH3(PPh3)2 with diazonium salts

The reaction of IrH₃(PPh₃)₂ with p-substituted aryldiazonium salts gives the compounds [IrH₂(NHNC₆H₄R)(PPh₃)₂]⁺BF₄^- at low temperature (-10°C) and the o-metalated complexes [I$\text{rH(NHN}$C₆H₃R)(PPh₃)₂]⁺BF₄^- (R  F, OCH₃) at 40–50°C. The reactions of the o-metalated complexes with CO, PPh₃, NaI and HCl have been studied.