Efficient homo-coupling reactions of heterocyclic aromatic bromides catalyzed by Pd(OAc)2 using indium

Homo-coupling reactions of heterocyclic aromatic bromides smoothly proceeded with cat-Pd(OAc)₂, indium, and LiCl in DMF to afford exclusively symmetric biaryls possessing heterocyclic aromatic ring in good to excellent yields.     

Silica-supported zinc bromide (ZnBr2/SiO2): a highly efficient heterogeneous catalyst for coupling acid chlorides with terminal alkynes

Silica-supported zinc bromide (ZnBr₂/SiO₂) is an efficient heterogeneous catalyst for the rapid synthesis of ynones by cross-coupling of acid chlorides with terminal alkynes in good to excellent yields under solvent-free conditions at room temperature.     

Formation and structural characterization of novel polynuclear palladium selenolato complexes [Pd3Se(SePh)3(PPh3)3]Cl and [Pd6Cl2Se4(SePh)2(PPh3)6]

In addition to well-known dinuclear phenylselenolato palladium complexes, the reaction of [PdCl₂(PPh₃)₂] and NaSePh affords small amounts of novel trinuclear and hexanuclear complexes [Pd₃Se(SePh)₃(PPh₃)₃]Cl (1) and [Pd₆Cl₂Se₄(SePh)₂(PPh₃)₆] (2). Complex 1 is triclinic, P1?, a=13.6310(2), b=16.2596(2), c=16.9899(3) Å, α=83.1738(5), β=78.9882(5), γ=78.7635(5)°. Complex 2 is monoclinic, C2/c, a=25.7165(9), b=17.6426(8), c=27.9151(14) Å, β=110.513(2)°. There are no structural forerunners for 1, but the hexanuclear complex 2 is isostructural with [Pd₆Cl₂Te₄(TeR)₂(PPh₃)₆] (R=Ph, C₄H₃S) that have been observed as one of the products in the oxidative addition of R₂Te₂ to [Pd(PPh₃)₄]. Mononuclear palladium complexes may play a significant role as building blocks in the formation of the polynuclear complexes.     

Catalytic asymmetric synthesis of descurainin via 1,3-dipolar cycloaddition of a carbonyl ylide using Rh2(R-TCPTTL)4

A catalytic asymmetric synthesis of descurainin has been achieved by incorporating an enantioselective 1,3-dipolar cycloaddition, a stereoselective alkene hydrogenation, an oxidation with Fremy’s salt and a regioselective demethylation with NbCl₅ as the key step. The 1,3-dipolar cycloaddition of a carbonyl ylide derived from tert-butyl 2-diazo-5-formyl-3-oxopetanoate with 4-hydroxy-3-methoxyphenylacetylene in the presence of dirhodium(II) tetrakis[N-tetrachlorophthaloyl-(R)-tert-leucinate], Rh₂(R-TCPTTL)₄, provided an 8-oxabicyclo[3.2.1]octane skeleton in 95% ee.     

NMR approach for the identification of dinuclear and mononuclear complexes: The first detection of [Pd(SPh)2(PPh3)2] and [Pd2(SPh)4(PPh3)2] - The intermediate complexes in the catalytic carbon-sulfur bond formation reaction

In the present study we have analyzed the nature of palladium complexes in the catalytic system for selective carbon-sulfur bond formation via the addition of S-S and S-H bonds to alkynes. For the first time the mononuclear and dinuclear palladium complexes were clearly detected by DOSY NMR under the catalytic conditions. It was demonstrated that the concentration of these palladium complexes strongly depends on the amount of phosphine ligand available under reaction conditions.     

Syntheses, structures, and properties of Ag4(Mo2O5)(SeO4)2(SeO3) and Ag2(MoO3)3SeO3

Ag₄(Mo₂O₅)(SeO₄)₂(SeO₃) has been synthesized by reacting AgNO₃, MoO₃, and selenic acid under mild hydrothermal conditions. The structure of this compound consists of cis-MoO₂²⁺ molybdenyl units that are bridged to neighboring molybdenyl moieties by selenate anions and by a bridging oxo anion. These dimeric units are joined by selenite anions to yield zigzag one-dimensional chains that extended down the c-axis. Individual chains are polar with the C₂ distortion of the Mo(VI) octahedra aligning on one side of each chain. However, the overall structure is centrosymmetric because neighboring chains have opposite alignment of the C₂ distortion. Upon heating Ag₄(Mo₂O₅)(SeO₄)₂(SeO₃) looses SeO₂ in two distinct steps to yield Ag₂MoO₄. Crystallographic data: (193 K; MoKα, λ=0.71073 Å): orthorhombic, space group Pbcm, a=5.6557(3), b=15.8904(7), c=15.7938(7) Å, V=1419.41(12), Z=4, R(F)=2.72% for 121 parameters with 1829 reflections with I>2σ(I). Ag₂(MoO₃)₃SeO₃ was synthesized by reacting AgNO₃ with MoO₃, SeO₂, and HF under hydrothermal conditions. The structure of Ag₂(MoO₃)₃SeO₃ consists of three crystallographically unique Mo(VI) centers that are in 2+2+2 coordination environments with two long, two intermediate, and two short bonds. These MoO₆ units are connected to form a molybdenyl ribbon that extends along the c-axis. These ribbons are further connected together through tridentate selenite anions to form two-dimensional layers in the [bc] plane. Crystallographic data: (193 K; MoKα, λ=0.71073 Å): monoclinic, space group P2₁/n, a=7.7034(5), b=11.1485(8), c=12.7500(9) Å, β=105.018(1) V=1002.7(2), Z=4, R(F)=3.45% for 164 parameters with 2454 reflections with I>2σ(I). Ag₂(MoO₃)₃SeO₃ decomposes to Ag₂Mo₃O₁₀ on heating above 550 °C.     

Solvothermal synthesis, crystal structure, magnetic and luminescent properties of (H3O)6·[Co4(H2O)4(HPMIDA)2(PMIDA)2)]·2H2O

A cobalt phosphonate (H₃O)₆·[Co₄(H₂O)₄(HPMIDA)₂(PMIDA)₂)]·2H₂O, 1, has been synthesized from a mild solvothermal reaction of Co(II) ion with N-(phosphonomethyl)iminodiacetic acid (H₄PMIDA). Compound 1 crystallizes in the triclinic space group with cell parameters of , , , α=93.06(3)°, β=99.66(3)°, γ=90.34(3)° and Z=1. Compound 1 shows a novel tetra-nuclear molecular structure. In the crystal lattice, molecules of 1 hydrogen bond to each other to form two-dimensional (2D) layers, which are further linked together by the co-crystallized H₂O molecules and H₃O⁺ counter ions through hydrogen bonding to form the 3D supramolecular network. Thermogravimetric analysis, IR spectrum, magnetic susceptibility and luminescent spectra are given.     

Mononuclear Pt(II) and Pd(II) 1,4-dithiolato complexes. Crystal structures of [Pt((−) DIOS) (PPh3)2] and [Pd(S(CH2) 4S)(Ph2P(CH2) 3PPh2)]. Application in styrene hydroformylation

Addition of 1,4-dithiols to dichloromethane solutions of [PtCl₂(P-P)] (P-P = (PPh₃)₂, Ph₂P(CH₂)₃PPh₂, Phd₂P(CH₂)₄PPh₂; 1,4-dithiols = HS(CH₂)₄SH, (−)DIOSH₂ (2,3-O-isopropylidene-1,4-dithiol-l-threitol), BINASH₂ (1,1′-dinaphthalene-2,2′-dithiol)) in the presence of NEt₃ yielded the mononuclear complexes [Pt(1,4-dithiolato)(P-P)]. Related palladium(II) complexes [Pd(dithiolato)(P-P)] (P-P=Ph₂P(CH₂)₃PPh₂, Ph₂P(CH₂)₄PPh₂; dithiolato = ⁻S(CH₂)₄S⁻, (−)-DIOS) were prepared by the same method. The structure of [Pt((−)DIOS)(PPh₃)₂] and [Pd(S(CH₂)₄S)(Ph₂P(CH₂)₃PPh₂)] complexes was determined by X-ray diffraction methods. Pt—dithiolato—SnC1₂ systems are active in the hydroformylation of styrene. At 100 atm and 125°C [Pt(dithiolate)(P-P)]/SnCl₂ (Pt:Sn = 20) systems provided aldehyde conversion up to 80%.     

Regioselective Re(I)-catalyzed coupling of terminal alkynes, Et2NH, and CO2 leading to anti-Markovnikov adducts

ReBr(CO)₅-catalyzed addition of Et₂NH and CO₂ to terminal alkynes afforded anti-Markovnikov adducts of alkenyl carbamates in good to excellent yield and high regioselectivity.     

Syntheses and structures of three new scandium selenites: Sc2(SeO3)3·H2O, Sc2 (SeO3)3·3H2O and CsSc3(SeO3)4 (HSeO3)2·2H2O

Three new hydrated scandium selenites have been hydrothermally synthesized as single crystals and structurally and physically characterized. Sc₂(SeO₃)₃·H₂O crystallizes as a new structure type containing novel ScO₇ pentagonal bipyramidal and ScO₆₊₁ capped octahedral coordination polyhedra. Sc₂(SeO₃)₃·3H₂O contains typical ScO₆ octahedra and is isostructural with its M₂(SeO₃)₃·3H₂O (M=Al, Cr, Fe, Ga) congeners. CsSc₃(SeO₃)₄(HSeO₃)₂·2H₂O contains near-regular ScO₆ octahedra and has essentially the same structure as its indium-containing analogue. All three phases contain the expected pyramidal [SeO₃]^2- selenite groups. Crystal data: Sc₂(SeO₃)₃·3H₂O, M_r=524.85, trigonal, R3c (No. 161), , , , Z=6, R(F)=0.018, wR(F²)=0.036; Sc₂(SeO₃)₃·H₂O, M_r=488.82, orthorhombic, P2₁2₁2₁ (No. 19), , , , , Z=4, R(F)=0.051, wR(F²)=0.086; CsSc₃(SeO₃)₄(HSeO₃)₂·2H₂O, M_r=1067.60, orthorhombic, Pnma (No. 62), , , , , Z=4, R(F)=0.035, wR(F²)=0.070.     

Hydrothermal synthesis and characterization of a new 3D vanadium(III) phosphite (C4H8N2H4)0.5(C4H8N2H3)[V4(HPO3)7(H2O)3]1.5H2O

A new vanadium(III) phosphite, (C₄H₈N₂H₄)_0.5(C₄H₈N₂H₃)[V₄(HPO₃)₇(H₂O)₃]1.5H₂O, has been synthesized hydrothermally by using V₂O₅, H₃PO₃ as reactants, piperazine as the structure-directing agent. The as-synthesized product was characterized by powder X-ray diffraction, IR spectroscopy, inductively coupled plasma analysis, thermogravimetric analysis, and SQUID magnetometer. Single-crystal X-ray diffraction analysis shows that the title compound crystallized in the trigonal space group (No. 165) with the parameters: , , and Z=4. Its structure is built up by alternation of octahedral VO₆ or VO₅(H₂O) and pseudo-pyramidal HPO₃ units to form infinite 2D layers, and these layers are interconnected by sharing vertex-oxygen with octahedral VO₆ units to generate a 3D open-framework structure with 12-membered ring channels in a and b directions, respectively, where there exist entrapped diprotonated and mono-protonated piperazine cations, and water molecules. Magnetic measurement indicates that paramagnetic behavior is observed down to 4 K.     

Hydrothermal synthesis and characterization of layered vanadium phosphite: [HN(C2H4)3N][(VO)2(HPO3)2(OH)(H2O)]·H2O

A novel compound, [HN(C₂H₄)₃N][(VO)₂(HPO₃)₂(OH)(H₂O)]·H₂O, was hydrothermally synthesized and characterized by single crystal X-ray diffraction. This compound crystallizes in the monoclinic system with the space group C2/c and cell parameters a=11.0753(3) Å, b=17.8265(6) Å, c=16.5229(5) Å, and β=92.362(2)°. The structure of the compound consists of vanadium phosphite layers which are built up from the infinite one-dimensional chains of [(VO)(H₂O)(HPO₃)₂]²⁻ of octahedral VO₅(H₂O) and pseudo pyramidal [HPO₃], and bridging binuclear fragments of [VO(OH)]₂. Thermogravimetric analysis and magnetic susceptibility data for this compound are given.     

Bimetallic single-source precursors [M(NH3)4][Co(C2O4)2(H2O)2]·2H2O (M = Pd, Pt) for the one run synthesis of CoPd and CoPt magnetic nanoalloys

All the steps of the proposed technique, from the synthesis of single-source precursors to the preparation of CoPd and CoPt nanoalloys, are described. The double complex salts (DCS) [M(NH₃)₄][Co(C₂O₄)₂(H₂O)₂]·2H₂O (M = Pd, Pt), which were synthesized by mixing solutions containing [M(NH₃)₄]²⁺ cations and [Co(C₂O₄)₂(H₂O)₂]²⁻ anions, have been used as precursors. The salts obtained were characterized by IR spectroscopy, thermal analysis, XRD and single crystal X-ray diffraction. The prepared compounds crystallize in the monoclinic (space group I2/m, M = Pd) and orthorhombic (space group I222, M = Pt) crystal systems. Thermal decomposition of the salts in helium or hydrogen atmosphere at 200-600 °C results in the formation of nanoalloys powders (random solid solution Co_0.50Pd_0.50 and chemically ordered CoPt). The size of the bimetallic particles varied from 5 to 20 nm. Order-disorder structural transformations in Co_0.50Pt_0.50 nanoalloys were studied. The magnetic properties of both chemically disordered Co_0.50Pd_0.50 and ordered CoPt clusters have also been measured.     

Synthesis of 2-arylpropionic acids by electrocarboxylation of benzylchlorides catalysed by PdCl2(PPh3)2

Electrochemical carboxylation of benzylchlorides catalysed by Pd(II) complex afforded 2-arylpropionic acids in good yields under atmospheric pressure of carbon dioxide at constant current of 10 mA cm⁻². Mechanistic and electrochemical studies revealed the cooperative role of reduced palladium species in the activation of carbon dioxide.     

New open-framework in the uranyl vanadates A3(UO2)7(VO4)5O (A=Li, Ag) with intergrowth structure between A(UO2)4(VO4)3 and A2(UO2)3(VO4)2O

New uranyl vanadates A₃(UO₂)₇(VO₄)₅O (M=Li (1), Na (2), Ag (3)) have been synthesized by solid-state reaction and their structures determined from single-crystal X-ray diffraction data for 1 and 3. The tetragonal structure results of an alternation of two types of sheets denoted S for _∞²[UO₂(VO₄)₂]⁴⁻ and D for _∞²[(UO₂)₂(VO₄)₃]⁵⁻ built from UO₆ square bipyramids and connected through VO₄ tetrahedra to _∞¹[U(3)O₅-U(4)O₅]⁸⁻ infinite chains of edge-shared U(3)O₇ and U(4)O₇ pentagonal bipyramids alternatively parallel to a- and b-axis to construct a three-dimensional uranyl vanadate arrangement. It is noticeable that similar _∞[UO₅]⁴⁻ chains are connected only by S-type sheets in A₂(UO₂)₃(VO₄)₂O and by D-type sheets in A(UO₂)₄(VO₄)₃, thus A₃(UO₂)₇(VO₄)₅O appears as an intergrowth structure between the two previously reported series. The mobility of the monovalent ion in the mutually perpendicular channels created in the three-dimensional arrangement is correlated to the occupation rate of the sites and by the geometry of the different sites occupied by either Na, Ag or Li. Crystallographic data: 293 K, Bruker X8-APEX2 X-ray diffractometer equipped with a 4 K CCD detector, MoKα, λ=0.71073 Å, tetragonal symmetry, space group P4¯m2, Z=1, full-matrix least-squares refinement on the basis of F²; 1,a=7.2794(9) Å, c=14.514(4) Å, R1=0.021 and wR2=0.048 for 62 parameters with 782 independent reflections with I?2σ(I); 3, a=7.2373(3) Å, c=14.7973(15) Å, R1=0.041 and wR2=0.085 for 60 parameters with 1066 independent reflections with I?2σ(I).     

Magnetic and catalytic properties of the 2D copper(II) functionalized VPO hybrid system [{Cu(bpy)}2(VO)3(PO4)2(HPO4)2]·2H2O

The hybrid 2D compound [{Cu(bpy)}₂(VO)₃(PO₄)₂(HPO₄)₂]·2H₂O (1), has been investigated due to its interesting magnetic and catalytic properties. Compound (1) acts as an efficient catalyst in the epoxidation of cyclohexene and styrene. The chemoselectivity towards the epoxidation of cyclohexene is notoriously higher than the one observed towards styrene. The bulk antiferromagnetic behaviour of [{Cu(bpy)}₂(VO)₃(PO₄)₂(HPO₄)₂]·2H₂O (1) can be well described with a pentanuclear model, using five J values. Both antiferromagnetic and ferromagnetic interactions mediated by phosphate bridges are found to be present in this hybrid copper(II)–vanadium(IV) material.     

Synthesis and characterization of new sulfide aggregates of the type [{Pt2(μ3-S)2(P-P)2}M(C6F5)2] (M=Ni, Pd, Pt; P-P=2PPh3, 2PMe2Ph, dppf)

The reaction of [Pt₂(μ-S)₂(P-P)₂] (P-P=2PPh₃, 2PMe₂Ph, dppf) [dppf=1,1^′-bis(diphenylphosphino)ferrocene] with cis-[M(C₆F₅)₂(PhCN)₂] (M=Ni, Pd) or cis-[Pt(C₆F₅)₂(THF)₂] (THF=tetrahydrofuran) afforded sulfide aggregates of the type [{Pt₂(μ₃-S)₂(P-P)₂}M(C₆F₅)₂] (M=Ni, Pd, Pt). X-ray crystal analysis revealed that [{Pt₂(μ₃-S)₂(dppf)₂}Pd(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Ni(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Pd(C₆F₅)₂] and [{Pt₂(μ₃-S)₂(PMe₂Ph)₂}Pt(C₆F₅)₂] have triangular M₃S₂ core structures capped on both sides by μ₃-sulfido ligands. The structural features of these polymetallic complexes are described. Some of them display short metal-metal contacts.     

Direct synthesis of hydrogen peroxide from H2/O2 using Pd/Al2O3 catalysts

Pd/Al₂O₃ catalysts were prepared by the impregnation method and were used for the direct formation of hydrogen peroxide from H₂ and O₂. The H₂O₂ concentration and selectivity were strongly dependent on the solubility of hydrogen in the reaction medium. The modification of the support by halogenate has a beneficial effect on the selectivity. The state of the active Pd on Pd/Al₂O₃ catalysts was studied using X-ray photoelectron spectroscopy, and Pd(0) was found to be active.     

Synthesis and characterization of methylpalladium(II) dithiolate complexes of the type [PdMe(SS)(ER3)] (SS = S2CNR 2, S2COEt, S2P(OR)2, S2 PPh2; ER3 = PMePh2, PPh3, AsPh3)

Methylpalladium(II) dithiolate complexes of the type [PdMe(SS)(ER₃] (SS = S₂ CNR₂ (R = Me or Et), S₂COEt, S₂P(OR)₂ (R = Et, ⁿPr, ⁱPr), S₂PPh₂; ER₃ = PMePh₂, PPh₃, AsPh₃) have been synthesized by the reaction of [Pd₂Me₂(μ-Cl)₂(PMePh₂)₂] with sodium/potassium/ammonium salts of the dithio acid or by treatment of [PdMeCl(cod)] with ER₃ followed by sodium/potassium/ammonium salts of the dithio ligand. All the complexes were characterized by elemental analysis, IR and nuclear magnetic resonance (¹H, ³¹P) data.