On the reactivity of [IrCl(N2)(PPh3)2] with alkynylsilanes - A new route to vinylidene iridium(I) complexes

The iridium dinitrogen complex [IrCl(N₂)(PPh₃)₂] (1) was found to react with alkynylsilanes to form the vinylidene iridium(I) complexes trans- (R/R′ = Ph/Me, 2; Me/Me, 3; Bn/Me, 4; SiMe₃/Me, 5; SiEt₃/Et, 6; ⁱPr/Me, 7) and with Me₃SiCCC(O)R to yield the iridium η²-alkyne complexes trans-[IrCl{η²-Me₃SiCCC(O)R}(PPh₃)₂] (R = OEt, 9; Me, 11). Complex 9 was found to isomerize upon heating or upon UV irradiation yielding the vinylidene complex trans-[IrCl{CC(SiMe₃)CO₂Et}(PPh₃)₂] (10). The reaction of 1 with Me₃SiCCCCSiMe₃ yielded the complex trans-[IrCl{CC(SiMe₃)CCSiMe₃}(PPh₃)₂] (8), whereas with MeO₂CCCCO₂Me the iridacyclopentadiene complex [Ir{C₄(CO₂Me)₄}Cl(PPh₃)₂] (13) was formed. The complexes were characterized by means of ¹H, ¹³C and ³¹P NMR spectroscopy as well as by IR spectroscopy and microanalysis.     

The CO and CS bond cleavage in carbon dioxide and tolyl isothiocyanate by reactions with the Mo(0) tetraphosphine complex [Mo{meso-o-C6H4(PPhCH2CH2PPh2)2}(Ph2PCH2CH2PPh2)]

A Mo(0) complex containing a new tetraphosphine ligand [Mo(P₄)(dppe)] (1; P₄ = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂, dppe = Ph₂PCH₂CH₂PPh₂) reacted with CO₂ (1 atm) at 60 °C in benzene to give a Mo(0) carbonyl complex fac-[Mo(CO)(η³-P₄O)(dppe)] (2), where the O abstraction from CO₂ by one terminal P atom in P₄ takes place to give the dangling P(O)Ph₂ moiety together with the coordinated CO. On the other hand, reaction of 1 with TolNCS (Tol = m-MeC₆H₄) in benzene at 60 °C resulted in the incorporation of three TolNCS molecules to the Mo center, forming a Mo(0) isocyanide-isothiocyanate complex trans,mer-[Mo(TolNC)₂(η²-TolNCS)(η³-P₄S)] (4), where the S abstraction occurs from two TolNCS molecules by P₄ and dppe to give the η³-P₄S ligand and free dppeS, respectively, together with two coordinated TolNC molecules. The remaining site of the Mo center is occupied by the third TolNCS ligating at the CS bond in an η²-manner. The X-ray analysis has been undertaken to determine the detailed structures for 2 and 4.     

Addition of benzenethiol to terminal alkynes catalyzed by hydrotris(3,5-dimethylpyrazolyl)borate-Rh(III) bis(thiolate) complex: Mechanistic studies with characterization of the key intermediate

The Rh(III)-thiolate complex [Tp^∗Rh(SPh)₂(MeCN)] (2; Tp^∗ = hydrotris(3,5-dimethylpyrazolyl)borate) readily undergoes substitution of MeCN by XyNC (Xy = 2,6-dimethylphenyl) to give the isocyanide complex [Tp^∗Rh(SPh)₂(XyNC)] (3), whereas reaction of 2 with terminal alkynes results in the formation of the rhodathiacyclobutene complex [Tp^∗Rh(SPh){η²-CHCR(SPh)}] (4; R = aryl, alkyl). Molecular structures of 3 and 4 (R = CH₂Ph) have been determined by single crystal X-ray diffraction. Complex 2 as well as [Tp^∗Rh(cyclooctene)(MeCN)] have been found to catalyze regioselective addition of benzenethiol to terminal alkynes RCCH at 50 °C to give R(PhS)CCH₂ in moderate to high yields. The above products are selectively formed when R = CH₂Ph and n-C₆H₁₃, while cis-RCHCHSPh and RC(SPh)₂CH₃ are also obtained as by-products when R = p-MeOC₆H₄. Catalytic cycle involving 2 and 4 is proposed based on the mechanistic studies using NMR measurement.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Syntheses, structures and electrochemistry of some 1-(η-allylamino)-1-ferrocenylcarbene complexes of chromium(0), molybdenum(0) and tungsten(0) : Part 13: The chemistry of metallacyclic alkenylcarbene complexes

The metallacyclic complexes (OC)₄MC(η²-NHCH₂CHCHX)Fc (4; X = H) and (5; X = CH₂OH) [M = Cr: a; Mo: b; W: c; Fc = ferrocenyl = CpFe(C₅H₄)] were obtained in good yields upon photo-decarbonylation of the bimetallic allylaminocarbene complexes (OC)₅MC(NHCH₂CHCHX)Fc (2; X = H)/(3; X = CH₂OH). At room temperature complexes 2/3 exist as mixtures of E- and predominantly Z-isomers with regard to the C-N bond. The molecular structures of 4b and 4c were determined by X-ray diffraction analyses. The intermetallic communicative effects and the interplay of Fc and η²-alkene moieties of 4a and 4b were assessed by cyclovoltammetry. All complexes were also characterized in solution by one- and two-dimensional NMR spectroscopy (¹H, ¹³C, ¹H NOE, ¹H/¹H COSY, ¹³C/¹H HETCOR).     

Syntheses and molecular structures of 18/16-electron half-sandwich iridium(III) complexes with chelating anilido-imine ligands

A 18-electron complex Cp^∗IrCl[o-C₆H₄N(C₆H₃-Me-p) (CHNC₆H₃-Me-p)] (Cp^∗ = η⁵-pentamethylcyclopentadienyl) (1a) was obtained by the reaction of the lithium salt of o-C₆H₄N (C₆H₃-Me-p)(CHNHC₆H₃-Me-p) (L₁) with [Cp^∗IrCl(μ-Cl)]₂ in toluene. However, when bulkier ligands (L₂ = o-C₆H₄N(C₆H₃-Me-p)(CHNHC₆H₃-i-Me₂-2,6), L₃ = o-C₆H₄N(C₆H₃-Me-p) (CHNHC₆H₃-i-Pr₂-2,6)) were employed in the same reaction, two 16-electron complexes {Cp^∗Ir[o-C₆H₄N(C₆H₃-Me-p)(CHNC₆H₃-i-Me₂-2,6)]}⁺Cl⁻ (2b) and {Cp^∗Ir[o-C₆H₄N(C₆H₃-Me-p)(CHNC₆H₃-i-Pr₂-2,6)]}⁺Cl⁻ (3b) were formed. A 16-electron complex {Cp^∗Ir [o-C₆H₄N(C₆H₃-Me-p) (CHNC₆H₃-Me-p)]}⁺SO₃ CF⁻₃ (1b) bearing L₁ could be achieved by the reaction of 1a with AgSO₃CF₃ in CH₃CN solution. The molecular structures of 1a and 2b were determined by X-ray crystallography. Theoretical calculations of all the 18/16-electron species were performed to study their bonding characters and electronic properties. Electron donating effect of Cp^∗ and steric effect of anilido-imine ligand were considered as major factors in the formation of coordinative unsaturated complexes 1b, 2b, 3b.     

Synthesis, characterization and solid state structures of thiosemicarbazone palladacycles: Influence of hydrogen bonding in the molecular arrangement

Treatment of the thiosemicarbazones 4-FC₆H₄C(Me)NN(H)C(S)NHR, (R = Me, a; Ph, b) and 2-ClC₆H₄C(Me)NN(H)C(S)NHR (R = Ph, c) with lithium tetrachloropalladate(II) in methanol or palladium(II) acetate in acetic acid gave the tetranuclear cyclometallated complex [Pd{4-FC₆H₃C(Me)NNC(S)NHR}]₄ (1a, 1b) and [Pd{2-ClC₆H₃C(Me)NNC(S)NHPh}]₄ (1c). Reaction of these tetramers with the diphosphines dppe, t-dppe, dppp or dppb in a 1:2 molar ratio gave the dinuclear cyclometallated complexes [(Pd{4-FC₆H₃C(Me)NNC(S)NHR})₂(μ-Ph₂P(CH₂)_nPPh₂)], (n = 2, 2a, 2b; 3, 4a, 4b; 4, 5a, 5b), [(Pd{4-FC₆H₃C(Me)NNC(S)NHPh})₂(μ-Ph₂PCHCHPPh₂)], (3a, 3b) and [(Pd{2-ClC₆H₃C(Me)NNC(S)NHR})₂(μ-Ph₂P(CH₂)_nPPh₂)], (n = 2, 2c, 2d; 3, 4c, 4d; 4, 5c, 5d), [(Pd{2-ClC₆H₃C(Me)NNC(S)NHPh})₂(μ-PPh₂CHCHPPh₂)], (3c, 3d). The X-ray crystal structure of the ligand b and the complexes 3c, 4a and 4d were determined. The structures of complexes 4a and 4d show that the different disposition of the chain cyclometallated of the thiosemicarbazones (in the same orientation or in the opposite one) is due to the different H bonds produced.     

Hydroxy- and boronic-acid-functionalized carbosilanes: Synthesis and solid state structure of Si(C6H4-4-SiMe2((CH2)3OH))4

Consecutive synthesis methodologies for the preparation of carbosilanes (Ph)(Me)Si((CH₂)₃B(OH)₂)₂ (2), Si(C₆H₄-4-SiMe₂((CH₂)₃B(OH)₂))₄ (5), (Ph)(Me)Si((CH₂)₃OH)₂ (3), and Si(C₆H₄-4-SiMe_3−n((CH₂)₃OH)_n)₄ (6a, n = 1; 6b, n = 2; 6c, n = 3) are reported. Boronic acids 2 and 5 are accessible by treatment of (Ph)(Me)Si(CH₂CHCH₂)₂ (1) or Si(C₆H₄-4-SiMe₂(CH₂CHCH₂))₄ (4a) with HBBr₂·SMe₂ followed by addition of water, while 3 and 6 are available by the hydroboration of 1 or Si(C₆H₄-4-SiMe_3−n(CH₂CHCH₂)_n)₄ (4a, n = 1; 4b, n = 2; 4c, n = 3) with H₃B·SMe₂ and subsequent oxidation with H₂O₂.The single molecular structure of 6a in the solid state is reported. Representative is that 6a crystallized in the chiral non-centrosymmetric space group P2₁2₁2₁ forming 2D layers due to intermolecular hydrogen bond formation of the HO functionalities along the crystallographic a and c axes.     

Synthesis, characterization and butadiene polymerization studies of cobalt(II) complexes bearing bisiminopyridine ligand

A series of 2,6-bis(imino)pyridyl Co(II) complexes of the general formulas [2,6-(ArNCMe)₂C₅H₃N]CoCl₂ (Ar = -C₆H₅, 3a; 2-MeC₆H₄, 3b; 2-EtC₆H₄, 3c; 2-ⁱPrC₆H₄, 3d; 2,6-ⁱPr₂C₆H₃, 3e; 4-ⁱPrC₆H₄, 3f; 4-FC₆H₄, 3g; 4-CF₃C₆H₄, 3h; 2-FC₆H₄, 3i; 2,6-F₂C₆H₃, 3j; 2-Me-4-FC₆H₃, 3k and 2,6-Me₂-4-FC₆H₂, 3l) and [2,6-(ArNCH)₂C₅H₃N]CoCl₂ (Ar = -C₆H₅, 3m; 2-EtC₆H₄, 3n and 4-ⁱPrC₆H₄, 3o) have been synthesized and characterized. The structures of new complexes 3a, 3f-3h and 3m-3o are further confirmed by X-ray crystallography. All complexes adopt distorted trigonal bipyramidal configuration with the equatorial plane formed by the pyridyl nitrogen atoms and the two chlorine atoms. In the complexes 3m and 3o, three aromatic rings are essentially coplanar, which is in sharp contrast to the other complexes, where three rings are almost orthogonal to each other. With methylaluminoxane (MAO) as cocatalyst in toluene at room temperature, the complexes show moderate to high conversion (42-99%) in butadiene polymerization, producing polybutadiene with tunable cis-1,4 structure (77.5-97%) and controllable molecular weight and molecular weight distribution. The catalytic activity, selectivity as well as the molecular weight and molecular weight distribution of the resultant polymer are found to be dependent on the size and nature of substituents on iminoaryl rings and their positions located. By deliberately tuning the ligand structure, more efficient catalyst in terms of high activity and high selectivity can be obtained.     

Addition of alkynes at bridging vinyliminium ligands in diiron complexes: Unprecedented diene formation by enyne-like metathesis

The zwitterionic bridging vinyliminium complex [Fe₂{μ-η¹:η³-C(Tol)C(CS₂)CN(Me)₂}(μ-CO)(CO)(Cp)₂] (5a) undergoes the addition of two equivalents of MeO₂C-CC-CO₂Me affording the bridging bis-alkylidene complex [Fe₂{μ-η¹:η³-C(Me)C{C(CO₂Me)C(CO₂Me)CSC(CO₂Me)C(CO₂Me)S}CNMe₂}(μ-CO)(CO)(Cp)₂] (6). One alkyne unit inserts into a C-CS₂ bond of the bridging ligand, with consequent rearrangement that leads to the formation of a diene. The reaction shows analogies with the enyne metathesis. The second alkyne is incorporated into the bridging frame via cycloaddition at the thiocarboxylate function, affording a 1,3-dithiolene. The complexes [Fe₂{μ-η¹:η³-C(R′)C(CS₂)CN(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Xyl, R′ = Tol, 5b; R = p-C₆H₄OMe, R′ = Me, 5c; Xyl = 2,6-Me₂C₆H₃), treated with MeO₂C-CC-CO₂Me and then with HBF₄, undergo the cycloaddition of the alkyne with the dithiocarboxylate group and protonation of the dithiocarboxylate carbon, affording the complexes [Fe₂{μ-η¹:η³-C(R′)C{C(H)SC(CO₂Me)C(CO₂Me)S}CN(Me)(R)}(μ-CO)(CO)(Cp)₂][BF₄] (R = Xyl, R′ = Tol, 7a; R = p-C₆H₄OMe, R′ = Me, 7b), respectively.The X-ray molecular structure of 6 has been determined.     

Cyclometallated thiosemicarbazone palladium(II) compounds: The first crystal and molecular structures of mononuclear complexes with a η-diphosphine ligand

Treatment of the thiosemicarbazones 2-XC₆H₄C(Me)NN(H)C(S)NHR (R = Me, X = F, a; R = Et, X = F, b; R = Me, X = Cl, c; R = Et, X = Br, d) with potassium tetrachloropalladate(II) in ethanol, lithium tetrachloropalladate(II) in methanol or palladium(II) acetate in acetic acid, as appropriate, gave the tetranuclear cyclometallated complexes [Pd{2-XC₆H₃C(Me)NNC(S)NHR}]₄ (1a-1d). Reaction of 1a-1d with the diphosphines Ph₂PCH₂PPh₂ (dppm), Ph₂P(CH₂)₂PPh₂ (dppe), Ph₂P(CH₂)₃PPh₂ (dppp) or trans-Ph₂PCHCHPPh₂ (trans-dpe) in 1:2 molar ratio gave the dinuclear cyclometallated complexes [{Pd[2-XC₆H₃C(Me)NNC(S)-NHR]}₂(μ-diphosphine-P,P)] (2a-5a, 3b, 3d, 4c, 5c). Reaction of 1a, 1b with the short-bite or long-bite diphosphines, dppm or cis-dpe, in a 1:4 molar ratio gave the mononuclear cyclometallated complexes [Pd{2-XC₆H₃C(Me)NNC(S)NHR}(diphosphine-P)] (6a, 6b, 7a). The molecular structure of ligand a and of complexes 1a, 3d, 5a, 5c, 6a, 6b and 7a have been determined by X-ray diffraction analysis. The structure of complex 7a shows that the long-bite cis-bis(diphenylphosphino)ethene phosphine appears as monodentate with an uncoordinated phosphorus donor atom.     

Cyclometallated platinum(II) compounds with imine ligands derived from amino acids: Synthesis and oxidative addition reactions

The reactions of [PtMe₂(μ-SMe₂)]₂ with imines 4-ClC₆H₄CHNCHRCO₂Me (R = H (1a), Me (1b), ⁱPr (1c), CH₂C₆H₄(4’-OH) (1d), C₆H₅ (1e), CH₂C₆H₅(1f)) derived from natural amino acids produced under mild conditions cyclometallated platinum(II) compounds [PtMe{κ²-(C,N)-4-ClC₆H₃CHNCHRCO₂Me}(SMe₂)] (2a-2f). These compounds gave the corresponding phosphine derivatives [PtMe{κ²-(C,N)-4-ClC₆H₃CHNCHRCO₂Me}(PPh₃)] (3a-3f). The corresponding cyclometallated platinum(IV) compounds [PtMe₂I{κ²-(C,N)-4-ClC₆H₃CHNCHRCO₂Me}(PPh₃)] (4) arising from intermolecular oxidative addition of methyl iodide were obtained with a high degree of stereo selectivity. Analogous results were obtained for imine 2,6-Cl₂C₆H₃CHNCH(CH₂C₆H₅)CO₂Me (1g) in a process involving intramolecular oxidative addition of a C-Cl bond. The obtained compounds were fully characterized including structure determinations for compounds 3f, 4d and 4f.     

Reactions of Ru(Cp) complexes with P(o-tolyl)3

Reaction of [Ru(Cp^∗)(CH₃CN)₃](PF₆) with P(o-tolyl)₃ affords [Ru(Cp^∗){(η⁶-o-tolyl)P(o-tolyl)₂}](PF₆) (4) in which the P-atom is not coordinated to the metal. The solid-state structure of 4 has been determined. A related reaction with P(p-tolyl)₃ reveals a small quantity [Ru(Cp^∗){(η⁶-p-tolyl)P(o-tolyl)₂}](PF₆), in solution, but mostly the expected bis-phosphine complex. Reaction of the Ru(IV) dication, [Ru(Cp^∗)(η³-PhCHCHCH₂)(DMF)₂](PF₆)₂, with P(o-tolyl)₃ gives a mixture of the phosphonium salt, C₆H₅CHCHCH₂P(o-tolyl)₃ (9) and the dication [Ru(Cp^∗) (η⁶-C₆H₅CHCHCH₂P(o-tolyl)₃)](PF₆)₂ (10). Salt 9 forms via attack of the P-atom on the allyl ligand. The latter product results from complexation of 9 via the phenyl group of the former allyl ligand. It would seem that the sterically demanding P(o-tolyl)₃ ligand is not readily compatible with the Ru(Cp^∗) fragment, in either the +2 or +4 oxidation state. Detailed NMR studies are reported.     

Synthesis and derivatization, structures and transition metal (Mo(0), Fe(II), Pd(II) and Pt(II)) complexes of phenylaminobis(diphosphonite), PhN{P(OC6H4OMe-o)2}2

The synthesis, derivatization and coordination behavior of a new aminobis(diphosphonite), PhN{P(OC₆H₄OMe-o)₂}₂ (1) is described. The ligand 1 reacts with H₂O₂, elemental sulfur or selenium to give the corresponding dichalcogenides PhN{P(E)(OC₆H₄OMe-o)₂}₂ (E = O, 2; S, 3; Se, 4) in good yield. Reactions of 1 with Mo(CO)₆, Pd(NCCH₃)₂Cl₂ and Pt(COD)Cl₂ resulted in the formation of the chelate complexes, Mo(CO)₄[PhN{P(OC₆H₄OMe-o)₂}₂] (5) and MCl₂[PhN{P(OC₆H₄OMe-o)₂}₂] (M = Pd,7; M = Pt, 8) whereas in the reaction of 1 with [CpFe(CO)₂]₂, one of the P-N bonds cleaves due to the metal assisted hydrolysis to give a mononuclear complex, [CpFe(CO){P(O)(OC₆H₄OMe-o)₂}{PhN(H)(P(OC₆H₄OMe-o)₂)}] (6). The molecular structures of 1, 4, 5 and 6 are determined by X-ray studies.     

A 2-iridathiophene from reaction between IrCl(CS)(PPh3)2 and Hg(CHCHPh)2

The thiocarbonyl analogue of Vaska’s compound is produced in high yield by first treating IrCl(CO)(PPh₃)₂ with CS₂ and methyl triflate to give [Ir(κ²-C[S]SMe)Cl(CO)(PPh₃)₂]CF₃SO₃ (1), secondly, reacting 1 with NaBH₄ to give IrHCl(C[S]SMe)(CO)(PPh₃)₂ (2), and finally heating 2 to induce elimination of both MeSH and CO to produce IrCl(CS)(PPh₃)₂ (3). When IrCl(CS)(PPh₃)₂ is treated with Hg(CHCHPh)₂ the novel 2-iridathiophene, Ir[SC₃H(Ph-3)(CHCHPh-5)]HCl(PPh₃)₂ (4) is produced. The X-ray crystal structure of the iodo-derivative of 4, Ir[SC₃H(Ph-3)(CHCHPh-5)]HI(PPh₃)₂ (5) confirms the unusual 2-metallathiophene structure. Treatment of IrCl(CS)(PPh₃)₂ with Hg(CHCPh₂)₂ produces both a coordinatively unsaturated 1-iridaindene, Ir[C₈H₅(Ph-3)]Cl(PPh₃)₂ (6) and a chelated dithiocarboxylate complex, Ir(κ²-S₂CCHCPh₂)Cl(CHCPh₂)(PPh₃)₂ (7). X-ray crystal structure determinations for 6 and 7 are reported.     

Ruthenium-based bioconjugates: Synthesis and X-ray structure of the mixed ligand sandwich compound RuCp(p-(CO2H)C6H4Tp) and labelling of amino acids and the neuropeptide enkephalin

Four differently substituted mixed ligand sandwich complexes CpRu(p-BrC₆H₄)Tp (3), CpRu(p-BrC₆H₄)Tp^Me (4), Cp^∗Ru(p-BrC₆H₄)Tp (5), Cp^iPrRu(p-BrC₆H₄)Tp (6), incorporating cyclopentadienyl (Cp) and functionalized tris(pyrazolyl)borate (Tp) ligands, have been synthesized and characterized. Air-stable 6 has been converted to benzoic acid-functionalized Cp^iPrRu(p-(CO₂H)C₆H₄)Tp (7), which has been structurally characterized in the solid state by X-ray diffraction. Compound 7 may be readily coupled to biomolecules as exemplified by the coupling to phenylalanine-methylester to give Cp^iPrRu(p-(CO-Phe-OMe)C₆H₄Tp) (8). In a solid phase peptide synthesis (SPPS), 7 has been coupled to the pentapeptide Enkephalin, to provide Cp^iPrRu(p-(CO-Tyr-Gly-Gly-Phe-Leu-OH)C₆H₄Tp) (9) as the first example of a mixed ligand sandwich ruthenium bioconjugate.     

Structure and spectroscopy of diorganotin(IV) complexes derived from N′-(2-hydroxy-3-methoxybenzylidene)benzohydrazide

Three new diorganotin(IV) complexes of the general formula R₂Sn[3-(OMe)-2-OC₆H₃CHN-NC(O)Ph] (R = Ph, Ia; R = Me, Ib; R = n-Bu, Ic) have been synthesised from the corresponding diorganotin(IV) dichlorides and the ligand, N′-(2-hydroxy-3-methoxybenzylidene)benzohydrazide in methanol at room temperature in the presence of trimethylamine. All the complexes have been characterized by elemental analysis, IR and ¹H, ¹³C, ¹⁵N, ¹¹⁹Sn NMR spectra, and their structures have been confirmed by single crystal X-ray diffraction analysis of one representative compound Ia. Complex Ia crystallises in the orthorhombic system, space group Pna2₁ with a = 12.424(5), b = 9.911(5), c = 18.872(5) Å; Z = 4. The ligand N′-(2-hydroxy-3-methoxybenzylidene)benzohydrazide (H₂L) coordinates to the metal centre in the enolate form via the phenolic O, imino N and enolic O atoms. In Ia, the central tin atom adopts a distorted trigonal bipyramidal coordination geometry with the oxygen atoms in axial positions, while the imino nitrogen atom of the Schiff base and the two phenyl groups occupy the equatorial sites. The δ(¹¹⁹Sn) values for the complexes Ia, Ib and Ic are −327.3, −151.7 and −187.2 ppm, respectively, thus indicating penta-coordinated Sn centres in solution.