Cationic polymerization of dimethyl-1,3-butadienes

The cationic polymerizations of dimethyl-1,3-butadienes with various catalysts in methylene chloride and toluene have been investigated. The activity of catalysts decreased in the order WCl₆ > AcClO₄ > SnCl₄·TCA > BF₃OEt₂. The homopolymerization rate of dimethyl-1,3-butadienes with WCl₆, AcClO₄, and SnCl₄·TCA decreased in the order 1,3-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,4-hexadiene. The polymers prepared with WCl₆, SnCl₄.TCA, and BF₃OEt₂ were rubberlike polymers or white powders, whereas those prepared with AcClO₄ were oily oligomers. The 1,4-propagation increased in the order 1,2-dimethyl-1,3-butadiene < 1,3-dimethyl-1,3-butadiene < 2,3-dimethyl-1,3-butadiene < 2,4-hexadiene. This order may indicate that the steric effect of methyl group determine primarily the microstructure of the polymer. The relative reactivity of dimethyl-1,3-butadienes toward a styryl cation decreased in the order 1,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 2,4-hexadiene. This order may be explained in terms of the stability of the resulting allylic cation.     

FACILE SYNTHESIS OF 1,3-DICHLOROTETRAORGANODISILAZANES

A new 1,3-dichlorodisilazane, 1,3-dichloro-1,3-dimethyl-1,3-divinyldisilazane (DMDV), was prepared from the trans-silylation reaction of hexamethyldisilazane (MM^N) and methylvinyldichlorosilane. The reactions between MM^N and other dichlorosilanes, R₂SiCl₂ (R = Me, Ph) in the absence of catalyst were also investigated, and the expected, 1,3-dichlorosilazanes, (ClSiMe₂)₂NH and (ClSiPh₂)₂NH were obtained, respectively.     

Synthesis of 1-Bromo-3-butyn-2-one and 1,3-Dibromo-3-buten-2-one

Synthetic procedures for the preparation of 1-bromo-3-butyn-2-one and 1,3-dibromo-3-buten-2-one are given. These compounds are prepared from 2-bromomethyl-2-vinyl-1,3-dioxolane, which can readily be prepared from 2-ethyl- 2-methyl-1,3-dioxolane. The synthetic routes are as follows: 2-bromomethyl-2-vinyl-1,3-dioxolane is converted to 2-(1,2-dibromoethyl)-2-bromomethyl-1,3-dioxolane. Double dehydrobromination with ^tBuOK affords 2-ethynyl-2-bromomethyl-1,3-dioxolane. Formolysis with formic acid gives 1-bromo-3-butyn-2-one. Deacetalized 2-bromoethyl-2-vinyl-1,3-dioxolane was treated with Br₂ and Li₂CO₃/12-crown-4 in tetrahydrofuran to give 1,3-dibrom-3-buten-2-one in moderate yield.     

Synthesis and photoluminescence properties of BF2 complexes with 1,3-diketone ligands

BF₂ complexes with 1,3-diketone ligands were synthesized, and their optical and electrochemical properties were studied. The colors of the complexes varied depending on the structures of the 1,3-diketone ligands. The absorption and emission maxima of the complexes with 1,3-diaryl-1,3-diketone ligands were considerably red shifted as compared to those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands, suggesting an extended π-conjugation of the 1,3-diaryl-1,3-diketone moieties. The molar absorption coefficients and quantum yields of the complexes with 1,3-diaryl-1,3-diketone ligands were larger than those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands. Cyclic voltammetry measurements revealed that the reduction potentials of the BF₂ complexes were higher than those of the free ligands. These complexes exhibited various emission colors in the solid states due to the intermolecular interactions.     

Statistical Optimization of 1,3-Propanediol (1,3-PD) Production from Crude Glycerol by Considering Four Objectives: 1,3-PD Concentration,Yield, Selectivity,and Productivity

This study investigated the biological conversion of crude glycerol generated from a commercial biodiesel production plant as a by-product to 1,3-propanediol (1,3-PD). Statistical analysis was employed to derive a statistical model for the individual and interactive effects of glycerol, (NH₄)₂SO₄, trace elements, pH, and cultivation time on the four objectives: 1,3-PD concentration, yield, selectivity, and productivity. Optimum conditions for each objective with its maximum value were predicted by statistical optimization, and experiments under the optimum conditions verified the predictions. In addition, by systematic analysis of the values of four objectives, optimum conditions for 1,3-PD concentration (49.8 g/L initial glycerol, 4.0 g/L of (NH₄)₂SO₄, 2.0 mL/L of trace element, pH 7.5, and 11.2 h of cultivation time) were determined to be the global optimum culture conditions for 1,3-PD production. Under these conditions, we could achieve high 1,3-PD yield (47.4%), 1,3-PD selectivity (88.8%), and 1,3-PD productivity (2.1/g/L/h) as well as high 1,3-PD concentration (23.6 g/L).     

The reaction of trichlorosilyltetracarbonyliron hydride (HFe(CO)4SiCl3) with conjugated dienes

Isoprene, 1,3-butadiene and 2,3-dimethyl-1,3-butadiene react with HFe(CO)₄SiCl₃ by addition of the Fe---H function to the diene. Isoprene appears to add predominantly 1,4 and 2,3-dimethyl-1,3-butadiene appears to add 1,2, while 1,3-butadiene may add both ways. In the case of isoprene and 1,3-butadiene loss of CO from the addition compound gives a stable π-allyl- Fe(Co)₃SiCl₃ product. Either cis- or trans-1,3-pentadiene is reduced to pentene by HFe(CO)₄SiCl₃.     

Alternative Synthesis and Crystal Structures of Titanocene(III)-β-Diketonate Complexes

Abstract

Reaction of titanocene prepared from Cp₂TiCl₂ and 2n-BuLi with β-diketones (β-diketone = 1-phenyl-1,3-butanedione, 1,3-diphenyl-1,3-propanedione, 3-methyl-2,4-pentanedione or 3-ethyl-2,4-pentanedione) afforded the titanocene(III) β-diketonate complex. The compounds [Ti(η⁵-Cp)₂(1-phenyl-1,3-butanedionate)] and [Ti(η⁵?Cp)₂(1,3-diphenyl-1,3-propanedionate)] have been characterized by X-ray crystallography.     

π-Olefin-iridium-komplexe : IV. Umsetzungen von chloro-dien-iridium-verbindungen mit lithiumorganylen

The complexes [(1,3-C₆H₈)₂IrR] and [(1,3-C₇H₁₀)₂IrR] (R = CH₃, C₆H₅) are obtained by reaction of the corresponding chloro compounds with RLi. Interaction of [Ir(COD)Cl]₂ (COD = 1,5-cyclooctadiene) with CH₃Li in the presence of 1,3-cyclohexadiene or isoprene yields [(COD)(1,3-C₆H₈IrCH₃] and [(COD)(C₅H₈IrCH₃], respectively. The products of the reaction of chlorodicyclodieneiridium with n-C₄H₉Li depend on the ring size of the cyclodiene ligands; with 1,3-cyclohexadiene [(1,3-C₆H₈)₂IrH] is formed while with 1,3-cycloheptadiene [(1,3-C₇H₁₀)(C₇H₉)Ir] is obtained together with [(1,3-C₇H₁₀)₃Ir₂(μ-H)₂]. Chemical and spectroscopic properties of the new compounds are discussed.     

Oxidation of 1,3-Dioxacycloalkanes with Complexes of Potassium Chlorochromate and Chlorodiperoxochromate with 15-Crown-5, Catalyzed with 2,2,5,5-Tetramethyl- 4-phenyl-3-oxo-3λ5-imidazolin-1-yloxyl

2,2,5,5-Tetramethyl-4-phenyl-3-oxo-3⁵-imidazolin-1-yloxyl catalyzes oxidation of 2-isopropyl-1,3-dioxolane, 2-phenyl-1,3-dioxolane, 2-phenyl-4-chloromethyl-1,3-dioxolane, and 2-phenyl-1,3-dioxane with 15-crown-5 complexes of potassium chlorodiperoxochromate (KCrO₅Cl·2C₁₀H₂₀O₅) and potassium chlorochromate (KCrO₃Cl·2C₁₀H₂₀O₅). 2-Isopropyl-1,3-dioxolane is oxidized to the corresponding monoester in quantitative yield, and the 2-phenyl derivatives yield benzaldehyde. The spiro ketal, 2,2-pentamethylene-4-methyl-1,3-dioxane, is decomposed to cyclohexanone.     

A polyoxoniobate constructed from Lindqvist-type hexaniobates and copper coordinated cations

A new organic–inorganic hybrid polyoxoniobate [Cu(1,3-dap)₂(H₂O)][(H₆Nb₆O₁₉)₂Cu(1,3-dap)₂]?·?4(1,3-dap)·20H₂O (1) (1,3-dap?=?1,3-diaminopropane) has been synthesized by the diffusion method and structurally characterized by elemental analyses, infrared spectrum, ultraviolet spectroscopy, and single crystal X-ray diffraction. Crystal structure analysis reveals that 1 consists of a dimeric dumbbell anion [(H₆Nb₆O₁₉)₂Cu(1,3-dap)₂]^2?, a copper coordinated cation, four 1,3-dap ligands and 20 crystal water molecules. Neighboring units are combined via hydrogen bonds forming a 3-D supramolecular framework.     

Reaction of Ph3P(SCN)2 with Further Orthohydroxy Carboxylic Acid Systems,Including Substituted β-Keto Acids: Synthesis of Novel 2-Thio-1,3-oxazines and Their Subsequent Transformation with Amines

We now report the first reaction of Ph₃P(SCN)₂ with 4,6-dihydroxy-5-methylisophthalic acid to give 10-methyl-2,8-dithio-1,3-oxazino-1,3-benzoxazine-4,6-dione. Also, the enol tautomer has been utilized in the reaction of β-keto acids with Ph₃P(SCN)₂ to give novel 2-thio-1,3-oxazines. Subsequent reaction of the 2-thio-1,3-oxazines with benzylamine resulted in opening of the oxazine ring and gave novel dibenzylamino-enamides, which could be cyclized to thiouracils. The reaction of 2-thio-1,3-oxazines with morpholine at low temperature led to the production of unstable 2-Mercapto-2-morpholino-1,3-oxazines. 2-Mercapto-2-morpholin-4-yl-2,3,5,6,7,8-hexahydro-4H-1,3-benzoxazin-4-one was observed to lose H₂S at room temperature to give 2-morpholin-4-yl-5,6,7,8-tetrahydro-4H-1,3-benzoxazin-4-one, which was subsequently tested and found to exhibit some antiplatelet activity.     

The structure and dynamic behaviour in solution of the trihydridodienerhenium complexes (Ph3P)2(η-1,3-diene)ReH3

The structure and fluxionality of the trihydridodiene complexes (Ph₃P)₂(η-1,3-<di-ene)ReH₃ have been studied by NMR spectroscopy (η-1-3-diene = buta-1,3-diene, 2-methylbuta-1,3-diene, 2,3-dimethylbuta-1,3-diene, cyclohexa-1,3-diene, penta-1,3-diene, hexa-1,3-diene and hexa-2,4-diene). Several rearrangement processes have been observed; they are, in order of increasing temperature: (a) ligand interchange; (b) reversible migration of a hydride ligand on to the diene ligand, leading to η-allyl species and, in the case of the cyclohexadiene trihydride, degenerate isomerisation of the cyclohexadiene moiety; and (c), in the case of the pentadiene and hexadiene derivatives, isomerisation of the diene ligand.     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

Spontaneous copolymerization of 1,3-cyclohexadiene with polar vinyl monomers

In the reactions of 1,3-cyclohexadiene(1,3-CHD) with polar vinyl monomers, CH₂?C(X)Y (X is -? CN and ? CO₂CH₃; Y is ? CI, ? H, and ? CH₃), the two α-chlorosubstituted monomers underwent rapid spontaneous copolymerization, accompanied by the formation of a small amount of cycloadduct. Both polar monomers also gave predominantly copolymers in the reaction with 1,3-cycloheptadiene(1,3-CHpD) in lower yield. 1,3-Cyclooctadiene (1,3-COD) reacted only with α-chloroacrylonitrile (CAN) to give a copolymer, while only cycloaddition took place in systems involving cyclopentadiene(CPD) as diene. The charge–transfer (CT) complex formation of 1,3-CHD with CAN and methyl α-chloroacrylate(MCA) was confirmed by ultraviolet spectroscopic studies and the equilibrium constants estimated were 0.18 and 0.07 liter/mole, respectively, at 25°C in chloroform as solvent. The activation energies for the copolymerizations of 1,3-CHD with CAN and MCA in benzene were determined to be ca. 6.6 and 9.6 kcal/mole, respectively. In the system composed of 1,3-CHD and CAN, only the copolymerization was affected by solvents used and oxygen. Although addition of ZnCl₂ to the system resulted in the acceleration of the both reactions, the variation in the product ratio of copolymer to cycloadduct with ZnCl₂ concentration showed a maximum. Based on the results in the present and preceding studies for systems involving 1,3-cyclodienes and acceptor monomers, the relationship between the cycloaddition and the spontaneous copolymerization is discussed.     

Eu(III) complex-doped PMMA having fast radiation rate and high emission quantum efficiency

Three ternary luminescent complexes, Eu (deuterated 1,3-diphenyl-1,3-propanedione)₃(1,10-phenanthroline), Eu (deuterated 1,3-diphenyl-1,3-propanedione)₃(2,2′-bipyridine), and Eu (deuterated 1,3-diphenyl-1,3-propanedione)₃ (bathophenanthroline) were synthesized using bidental oxygen and nitrogen as ligands. Luminescent polymers were fabricated by incorporating deuterated Eu(III) complexes in a poly(methyl methacrylate) matrix. Luminescent poly(methyl methacrylate) containing Eu (deuterated 1,3-diphenyl-1,3-propanedione)₃ (bathophenanthroline) exhibited relatively higher quantum yield, faster radiation rate, sharper red emission and larger stimulated emission cross-section (quantum yield 36%, radiation rate 8.6 × 10² s^?1, full width at half maximum 3.4 nm, and stimulated emission cross-section σ _p = 1.4 × 10^?20 cm²) of the PMMA matrix. The value of σ _p was the same order as the values of Nd-glass laser for practical use. Additionally, the thermal behaviors of the Eu(III) ternary complexes were studied, and the results indicated that all of them can be long-term used in high temperature environment. Prepared luminescent polymer including Eu (deuterated 1,3-diphenyl-1,3-propanedione)₃ (bathophenanthroline) showed promising results for applications in novel organic Eu(III) devices, such as high-power laser materials and optical fibers.     

rac-[CH2(3-tert-butyl-1-indenyl)2]ZrCl2/MAO in the Copolymerization of Olefins and Dienes

Olefin-diene copolymerizations in the presence of C₂ symmetric zirconocene rac-[CH₂(3-tert-butyl-1-indenyl)₂]ZrCl₂/MAO catalytic system have been reported and rationalized by experimental and molecular modeling studies. Ethene gives 1,2-cyclopropane and 1,2-cyclopentane, 1,3-cyclobutane, and 1,3-cyclopentane units in copolymerization with 1,3-butadiene, 1,4-pentadiene, and 1,5-hexadiene, respectively. Propene-1,3-butadiene copolymerizations lead to 1,2 and 1,4 butadiene units and to a low amount of 1,2-cyclopropane units.     

Isomerization of perfluoro-3,3-diethylindan-1-one into perfluoro-1,3-dimethyl-4-ethyl-1 H-isochromen under the action of antimony pentafluoride

The heating of perfluoro-3,3-diethylindan-1-one with SbF₅ at 180°C after treatment of the reaction mixture with anhydrous HF afforded perfluoro-1,3-dimethyl-4-ethylisochromen, and after hydrolysis, perfluoro-1,3-dimethyl-4-ethyl-1H-isochromen-1-ol. The latter under the action of NaHCO₃ converted into 5,6,7,8-tetrafluoro-1,3-bis(trifluoromethyl)-1H-isochromen-1-ol. Both isochromenols reacted with SOCl₂ gave the corresponding polyfluoro-1-chloro-1H-isochromens. On dissolving isochromenols in CF₃SO₃H and isochromens in SbF₅ perfluoro-1,3-dimethyl-4-ethylisochromenyl and 5,6,7,8-tetrafluoro-1,3-bis(trifluoromethyl)isochromenyl cations were generated which by hydrolysis were converted into the corresponding isochromenols.     

Reductive coupling of 1,3-dimethyluracils with benzophenone by low-valent titanium: unusual two-to-one coupling

The reductive coupling of 1,3-dimethyluracil with benzophenone by Zn-TiCl₄ in THF gave unusual two-to-one adduct and its further reduced product. The reductive coupling of 1,3-dimethyl-5-fluorouracil with benzophenone by Zn-TiCl₄ also gave two-to-one adduct. 1,3-Dimethylthymine was, however, completely inert under the same conditions.     

π-Olefin-iridium-komplexe : II. Synthese und dynamisches verhalten von bis(η4-Cyclodien)-hydrido-iridium(I)-komplexen

By reaction of [Ir(COD)Cl]₂ (COD = 1,5-cyclooctadiene) with i-C₃H₇MgBr in the presence of cyclic dienes, complexes of the type [IrH(COD)L] (L = 1,3-cyclohexadiene, 2-methyl-],3-cyclohexadiene, 5-ethyl-1,3-cyclohexadiene, 1,3-cycloheptadiene) are obtained. The system IrCl₃/i-C₃H₇MgBr/1,3-C₆H₈ yields [IrH(1,3-C₆H₈)₂]. According to NMR spectroscopic investigations the pure hydrido forms exist in solution only at low temperatures while at room temperature dynamic H-addition—elimination equilibria of the type [IrH(η⁴-diene)(COD)] ? [Ir(η³-enyl)(COD)] and [IrH(η⁴-1,3-C₆H₈)₂] ? [Ir(η³-C₆H₉)-(η⁴-1,3-C₆H₈)], respectively, are observed; the hydrogen at the iridium atom is thereby transferred to the endo positions of the diene ligands.     

The methoxycarbonylcarbene insertion into 1,3-dithiolane and 1,3-oxathiolane rings

Treatment of substituted 1,3-dithiolanes and 1,3-oxathiolanes with methyl diazoacetate in the presence of Rh₂(OAc)₄ effects ring expansion to the corresponding substituted 1,4-dithiane-2-carboxylates and 1,4-oxathiane-3-carboxylates. The sulfur ylides initially generated in these reactions undergo Stevens rearrangement in competition with both [2,3]-C-C-sigmatropic rearrangement and intramolecular fragmentation. In the case of 2-styryl-substituted 1,3-oxathiolane and 1,3-dithiolane, ring expansion on one-, three- and four-carbons subsequently takes place.