Synthetic and structural studies of NHC–Pt(dvtms) complexes and their application as alkene hydrosilylation catalysts (NHC = N-heterocyclic carbene,dvtms = divinyltetramethylsiloxane)

The synthesis and structural characterization of a series of platinum complexes, bearing N-heterocyclic carbenes (NHC) and divinyltetramethylsiloxane (dvtms) as supporting ligands, are described. The reaction of commercially available Karstedt’s catalyst (Pt₂{(η²-ViSiMe₂)₂O}₃) with in situ generated NHC leads to monomeric platinum(0) complexes in which one NHC is bound to the metal center, as indicated by spectroscopic analysis and single-crystal X-ray diffraction studies. The relative reactivity trend for these complexes as catalysts for the hydrosilylation of alkenes is discussed in terms of NHC ligand steric properties.     

Expanded ring N-heterocyclic carbene complexes of zero valent platinum dvtms (divinyltetramethyldisiloxane): Highly efficient hydrosilylation catalysts

The synthesis and characterisation of a series of new 6- and 7-membered NHC (N-heterocyclic carbene) complexes 7-12 of zero valent platinum dvtms (divinyltetramethyldisiloxane), [Pt(NHC)(dvtms)] are reported. A number of the complexes were investigated as catalyst precursors in the hydrosilylation of a range of unsaturated substrates, including alkynes, alkenes and a ketone with triethylsilane and bis(trimethylsiloxy)methylsilane (MD’M), at low catalyst loading (0.005 mol %); in general, the activity, and the selectivity for 1-functionalised product was found to be high.     

Olefin epoxidation catalyzed by [Ru(TDL)(tmeda)H2O] complexes (TDL = tridentate Schiff-base ligand; tmeda = tetramethylethylenediamine)

Mixed-chelate complexes of ruthenium have been synthesized using tridentate Schiff-base ligands (TDLs) derived from condensation of 2-aminophenol or 2-aminobenzoic acid with aldehydes (salicyldehyde, 2-pyridinecarboxaldehyde), and tmeda (tetramethylethylenediamine). [Ru^III(hpsd)(tmeda)(H₂O)]⁺ (1), [Ru^III(hppc)(tmeda)(H₂O)]²⁺ (2), [Ru^III(cpsd)(tmeda)(H₂O)]⁺ (3) and [Ru^III(cppc)(tmeda)(H₂O)]²⁺ (4) complexes (where hpsd²⁻ = N-(hydroxyphenyl)salicylaldiminato); hppc⁻ = N-(2-hydroxyphenylpyridine-2-carboxaldiminato); cpsd²⁻ = (N-(2-carboxyphenyl)salicylaldiminato); cppc⁻ = N-2-carboxyphenylpyridine-2-carboxaldiminato) were characterized by microanalysis, spectral (IR and UV–vis), conductance, magnetic moment and electrochemical studies. Complexes 1–4 catalyzed the epoxidation of cyclohexene, styrene, 4-chlorostyrene, 4-methylstyrene, 4-methoxystyrene, 4-nitrostyrene, cis- and trans-stilbenes effectively at ambient temperature using tert-butylhydroperoxide (t-BuOOH) as terminal oxidant. On the basis of Hammett correlation (log k_rel vs. σ⁺) and product analysis, a mechanism involving intermediacy of a [Ru–O–OBu^t] radicaloid species is proposed for the catalytic epoxidation process.     

Formation and reactivity of the cyclometallated N-heterocyclic carbene complexes [Ru(NHC)'(dppe)(CO)H

Thermolysis of [Ru(PPh(3))(dppe)(CO)HCl] (dppe = 1,2-bis(diphenylphosphino)ethane) with the N-heterocyclic carbenes I(i)Pr(2)Me(2) (1,3-diisopropyl-4,5-dimethyl-imidazol-2-ylidene), IEt(2)Me(2) (1,3-diethyl-4,5-dimethyl-imidazol-2-ylidene) or ICy (1,3-dicyclohexylimidazol-2-ylidene) gave the cyclometallated carbene complexes [Ru(NHC)'(dppe)(CO)H] (NHC = I(i)Pr(2)Me(2), 4; IEt(2)Me(2), 5; ICy, 6). Dissolution of 4 in CH(2)Cl(2) or CHCl(3) gave the trans-Cl-Ru-P complex [Ru(I(i)Pr(2)Me(2))'(dppe)(CO)Cl] (7), which converted over hours at room temperature to the trans-Cl-Ru-CO isomer 7'. Chloride abstraction from 7 by NaBPh(4) under an atmosphere of H(2) produced the cationic mono-hydride complex [Ru(I(i)Pr(2)Me(2))(dppe)(CO)H][BPh(4)] (9), which could also be formed by protonating 4 with 1 eq HBF(4)·OEt(2). Treatment of 4 with excess HBF(4)·OEt(2) followed by extraction into MeCN produced the dicationic acetonitrile complex [Ru(I(i)Pr(2)Me(2))(dppe)(CO)(NCMe)(2)][BF(4)](2) (10). The structures of 6, 7, 7' and 10 have been determined by X-ray crystallography.     

Stoichiometric and catalytic reactivity of the N-heterocyclic carbene ruthenium hydride complexes [Ru(NHC)(L)(CO)HCl] and [Ru(NHC)(L)(CO)H(eta2-BH4)] (L=NHC, PPh3)

Thermolysis of [Ru(AsPh3)3(CO)H2] with the N-aryl heterocyclic carbenes (NHCs) IMes (1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), IPr (1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) or the adduct SIPr.(C6F5)H (SIPr=1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene), followed by addition of CH2Cl2, affords the coordinatively unsaturated ruthenium hydride chloride complexes [Ru(NHC)2(CO)HCl] (NHC=IMes , IPr , SIPr ). These react with CO at room temperature to yield the corresponding 18-electron dicarbonyl complexes . Reduction of and [Ru(IMes)(PPh3)(CO)HCl] () with NaBH4 yields the isolable borohydride complexes [Ru(NHC)(L)(CO)H(eta2-BH4)] (, L=NHC, PPh3). Both the bis-IMes complex and the IMes-PPh3 species react with CO at low temperature to give the eta1-borohydride species [Ru(IMes)(L)(CO)2H(eta1-BH4)] (L=IMes , PPh3), which can be spectroscopically characterised. Upon warming to room temperature, further reaction with CO takes place to afford initially [Ru(IMes)(L)(CO)2H2] (L=IMes, L=PPh3) and, ultimately, [Ru(IMes)(L)(CO)3] (L=IMes , L=PPh3). Both and lose BH3 on addition of PMe2Ph to give [Ru(IMes)(L)(L')(CO)H2](L=L'=PMe2Ph; L=PPh3, L'=PMe2Ph). Compounds and have been tested as catalysts for the hydrogenation of aromatic ketones in the presence of (i)PrOH and H2. For the reduction of acetophenone, catalytic activity varies with the NHC present, decreasing in the order IPr>IMes>SIMes.     

Synthetic routes to [Au(NHC)(OH)] (NHC = N-heterocyclic carbene) complexes

New procedures for the synthesis of [Au(NHC)(OH)] are reported. Initially, a two-step reaction via the digold complex [{Au(NHC)}(2)(μ-OH)][BF(4)] was probed, enabling the preparation of the novel [Au(SIPr)(OH)] complex and of its previously reported congener [Au(IPr)(OH)]. After further optimization, a one-step procedure was developed.     

N-heterocyclic carbene complexes of Zn(II): synthesis, X-ray structures and reactivity

The synthesis of six novel zinc (II) mono(N-heterocyclic carbene) complexes is described. 1,3-Bis(mesityl)-imidazol-2-ylidene was reacted with the zinc salts ZnX₂ (X=Cl, CH₃COO, PhCOO, and PhCH₂COO) to yield the corresponding monomeric Zn-NHC complex ZnCl₂(NHC)(THF) (1) and dimeric [Zn(OOCCH₃)₂(NHC)]₂ (2), [Zn(OOCPh)₂(NHC)]₂ (3), [Zn(OOCCH₂Ph)₂(NHC)]₂ (4) (NHC=1,3-bis(mesityl)-imidazol-2-ylidene). Reaction of 1 with 2 equivalents of silver trifluoromethanesulfonate yielded monomeric Zn(O₃SCF₃)₂(NHC)(THF) (5), reaction of 1 with sodium {[R(+)-α-2-(1-phenyl-ethylimino)-methyl]-phenolate} yielded monomeric ZnCl(OC₆H₄-2-CHN(CHPhCH₃)(NHC) (6). Compounds 1, 4-6 were structurally characterized by X-ray analysis. Selected compounds were investigated for their activity in the copolymerization of carbon dioxide with cyclohexene oxide as well as in the ring-opening polymerization of cyclohexene oxide and ε-caprolactone.     

Mechanistic Insights into the Synthesis of [Rh(acac)(CO)(NHC)] (NHC=N-heterocyclic carbene) Complexes Using a Weak Base

A simple synthetic method to access a wide range of [Rh(acac)(CO)(NHC)] complexes is described. In situ infra-red monitoring provides insights into the mechanism of the reaction, including the identification of a key intermediate. An understanding of the reaction mechanism leads to the discovery of novel pathways to commonly used congeners.     

Stable,three-coordinate Ni(CO)(2)(NHC) (NHC = N-heterocyclic carbene) complexes enabling the determination of Ni-NHC bond energies

The synthesis and characterization of three- and four-coordinate Ni(CO)n(NHC) (n = 2, 3; NHC = N-heterocyclic carbene) complexes are reported. Reactions with CO of the Ni(CO)2(NHC) complexes lead to the quantitative formation of Ni(CO)4. Investigation of this reaction under equilibrium conditions allows for the determination of Ni-NHC bond dissociation energies.     

Nature of metal–NHC bonds in some potential anticancer [(NHC(R))2→M]+ (M = CuI,AgI, AuI,R = n-propyl,n-butyl,n-pentyl,n-hexyl,n-heptyl,n-octyl,n-nonyl,n-decyl) complexes

1. Download : Download high-res image (144KB)
2. Download : Download full-size image

     

A general synthetic route to mixed NHC-phosphane palladium(0) complexes (NHC=N-heterocyclic carbene)

Mixed NHC-phosphane palladium(0) complexes [(NHC)Pd(PR(3))] (NHC: N-heterocyclic carbene) are synthesized directly from commercially available reagents, with the possibility to tune the nature of both the NHC and the phosphane. Reaction of [(NHC)Pd(allyl)Cl] (palladium source) and PR(3), in the presence of a base afforded, in isopropanol, [(NHC)Pd(PR(3))] in good yields. We found that the nature of the solvent played a key role in the efficient reduction of the Pd(II) precursor to Pd(0). Supported by experimental evidence we propose that the reduction step is driven by the isopropoxide anion formed in situ from isopropanol and a base. Detection of acetone in the reaction mixture confirms that the isopropoxide anion acts as the reducing agent. Moreover, different bases proved efficient for the reaction. The structures of the complexes were unambiguously confirmed by X-ray analysis. Exposure of these complexes to air does not lead to decomposition, but to the oxo-complex [(NHC)Pd(PR(3))(O(2))], which is stable both in the solid state and in solution.     

NHC-Pd(II)-Im (NHC = N-heterocyclic carbene; Im = 1-methylimidazole) complexes as efficient catalysts for Suzuki-Miyaura coupling reactions of aryl chlorides

A new type of well-defined N-heterocyclic carbene (NHC)-palladium chloride-imidazole complexes derived from IPrHCl or IMesHCl, PdCl₂ and 1-methylimidazole exhibits high catalytic activity in the room-temperature Suzuki-Miyaura coupling reactions of aryl or heteroaryl chlorides. Moreover, the large-scale (20.0 mmol) couplings in the presence of 0.01 mol% catalyst loading can also give the corresponding coupling products in high yields.     

Air-stable CpPd(NHC)Cl (NHC = N-heterocyclic carbene) complexes as highly active precatalysts for Kumada-Tamao-Corriu coupling of aryl and heteroaryl chlorides

A very straightforward one-pot method has been developed for preparation of air-stable CpPd(NHC)Cl complexes 1a-d. This new class of well-defined NHC-Pd complexes exhibits high catalytic activity in Kumada-Tamao-Corriu cross-coupling reaction involving various aryl and heteroaryl chlorides. Notably, the less sterically encumbered NHC ligand around Pd centre showed higher catalytic activity.     

Synthesis,DNA‐Binding and Photocleavage Studies of the Ruthenium(II) Complexes [Ru(phen)2(ppd)]2+ and [Ru(phen)(ppd)2]2+ (ppd=Pteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione,phen=1,10‐Phenanthroline)

Two new complexes, [Ru(phen)₂(ppd)]²⁺ ( 1 ) and [Ru(phen)(ppd)₂]²⁺ ( 2 ) (ppd=pteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione, phen=1,10‐phenanthroline) were synthesized and characterized by ES‐MS, ¹H‐NMR spectroscopy, and elemental analysis. The intercalative DNA‐binding properties of 1 and 2 were investigated by absorption‐spectroscopy titration, luminescence‐spectroscopy studies, thermal denaturation, and viscosity measurements. The theoretical aspects were further discussed by comparative studies of 1 and 2 by means of DFT calculations and molecular‐orbital theory. Photoactivated cleavage of pBR322 DNA by the two complexes were also studied, and 2 was found to be a much better photocleavage reagent than 1 . The mechanism studies revealed that singlet oxygen and the excited‐states redox potentials of the complex may play an important role in the DNA photocleavage.     

Excited state properties of [Pd0(NHC)(quinone)]2 with NHC = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene and quinone = 1,4-naphthoquinone

The carbene complex [Pd⁰(NHC)(quinone)]₂with NHC = 1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene and quinone = 1,4-naphthoquinone shows two long-wavelength absorptions at 312 and 399 nm which are assigned to (NHC→quinone) LLCT and (Pd⁰ → quinone) MLCT transitions. The MLCT state is not reactive, but emissive (λ_max = 564 nm at 77 K). At r.t., the complex undergoes a photoredox decomposition which is initiated by the LLCT state.     

NHC/Nickel(II)‐Catalyzed [3+2] Cross‐Dimerization of Unactivated Olefins and Methylenecyclopropanes

Cross‐dimerization of a methylenecyclopropane ( 1 ) and an unactivated alkene ( 2 ) with typical hydroalkenylation reactivity was observed for the first time by using a [NHC‐Ni(allyl)]BAr^F catalyst (NHC=N‐heterocyclic carbene). Results show that the C?C cleavage of 1 did not involve a Ni⁰ oxidative addition, which was crucial in former systems. Thus the method reported here emerges as a complementary method for attaining highly chemo‐ and regioselective synthesis of methylenecyclopentanes ( 3 ) with broad scope. An efficient NHC/Ni^II‐catalyzed rearrangement of 1 leads to the convergent synthesis of 3 in the presence of 2 .     

An NHC–Silyl–NHC Pincer Ligand for the Oxidative Addition of C−H,N−H,and O−H Bonds to Cobalt(I) Complexes

N‐Heterocyclic carbene based pincer ligands bearing a central silyl donor, [CSiC]⁻, have been envisioned as a class of strongly σ‐donating ligands that can be used for synthesizing electron‐rich transition‐metal complexes for the activation of inert bonds. However, this type of pincer ligand and complexes thereof have remained elusive owing to their challenging synthesis. We herein describe the first synthesis of a CSiC pincer ligand scaffold through the coupling of a silyl–NHC chelate with a benzyl–NHC chelate induced by one‐electron oxidation in the coordination sphere of a cobalt complex. The monoanionic CSiC ligand stabilizes the Co^I dinitrogen complex [(CSiC)Co(N₂)] with an unusual coordination geometry and enables the challenging oxidative addition of E−H bonds (E=C, N, O) to Co^I to form Co^III complexes. The structure and reactivity of the cobalt(I) complex are ascribed to the unique electronic properties of the CSiC pincer ligand, which provides a strong trans effect and pronounced σ‐donation.     

Synthesis,characterization, DNA-binding and DNA-photocleavage studies of [Ru(bpy)2(pmip)] and [Ru(phen)2(pmip)] (pmip = 2-(2′-pyrimidyl)imidazo[4,5-f][1,10]phenanthroline

Two new Ru(II) complexes, [Ru(bpy)₂(pmip)]²⁺ (1) and [Ru(phen)₂(pmip)]²⁺ (2), have been synthesized and characterized by elemental analysis, ESI-MS and ¹H NMR spectra. Their DNA-binding properties were studied by means of UV–VIS, emission and CD spectra, thermal denaturation and viscosity measurements as well as their DNA-photocleavage properties. The experimental results show that both 1 and 2 can bind to DNA in an intercalative mode; the DNA-binding affinity of 2 is greater than that of 1, which suggests that the ancillary ligands have a significant effect on the spectroscopic properties and DNA-binding behavior of the Ru(II) complexes. Under irradiation with UV light, the Ru(II) complexes show excellent efficiency of cleaving DNA. This research may provide valuable insight into the interactions of metal complexes with DNA, knowledge that is an excellent backdrop for the rational design of promising drugs.