1,3-Diarylimidazolidin-2-ylidene (NHC) complexes of Pd(II): Electronic effects on cross-coupling reactions and thermal decompositions

The synthesis of 1,3-diarylimidazolidin-2-ylidene (NHC) precursor, 1,3-bis(2,4,6-trimethylphenyl)imidazolinium chloride, (3b) has been extended to the electronically and sterically modified NHC precursors 3a (X = H), 3c (X = Br) and 3e (X = Cl) in order to investigate the electronic effect of a p-substituent (X) on cross-coupling catalysts. Complexes of the type PdCl₂(NHC)₂ (5), PdCl₂(NHC)(PPh₃) (6) and [RhCl(NHC)(cod)] (7) were prepared from 3 or 4d (1,3-bis(2,4-dimethylphenyl)-2-trichloromethylimidazolidin). Initial decomposition temperatures of the complexes 5 and 6 were determined by TGA. In situ formed complexes from Pd(OAc)₂ and 3 as well as the preformed complexes 5 and 6 have been tested as catalysts in coupling of phenylboronic acid with 4-haloacetophenones. The electron donating ability of NHCs derived from 3 was assessed by measuring C-O frequencies in the respective [RhCl(NHC)(CO)₂] complex 8 which was prepared by replacement of cod ligand of 7 with CO. An interesting correlation between the electron-donating nature of the aryl substituent and catalytic activity and also initial decomposition temperature of the complexes 5 and 6 was observed.     

Exploring the reactivity of an N-pyrazole, P-phosphine hybrid ligand with Cu(I), Ag(I) and Au(I) precursors

The reactivity of (3,5-dimethyl-1H-pyrazol-1-yl)ethyldiphenylphosphine (L) hybrid ligand against Cu(I), Ag(I) and Au(I) has been assayed and compounds [Cu(L)₂](PF₆) (1), [Ag(L)]₂(PF₆)₂·2C₂H₄Cl₂·2C₄H₁₀O (2) and [AuCl(L)]₂ (3) have been isolated and fully characterised. A fully characterisation by analytical and spectroscopic methods of 1-3 are presented and X-ray crystal structures of 1 and 2 are also reported. The similar data obtained between 2 and 3 permits to do a serious purpose of the structure of 3 in solid and solution.     

Complexes of N-thiophosphorylthiourea (EtO)2P(O)CH2C6H4-4-[NHC(S)NHP(S)(OiPr)2] with Zn(II), Cd(II), Co(II) and Cu(PPh3)(I)

Reaction of O,O’-diisopropylthiophosphoric acid isothiocyanate (iPrO)₂P(S)NCS with diethyl 4-aminobenzylphosphonate (EtO)₂P(O)CH₂C₆H₄-4-NH₂ leads to the new N-thiophosphorylated thiourea (EtO)₂P(O)CH₂C₆H₄-4-[NHC(S)NHP(S)(OiPr)₂] (HL). Reaction of the potassium salt of HL with Zn(II), Cd(II) and Co(II) in aqueous EtOH leads to complexes of formula M(L-S,S’)₂ (ML₂). Heteroligand copper(I) complex of HL and triphenylphosphine was prepared by the reaction of the potassium salt KL and Cu(PPh₃)₃I. Copper in complex Cu(PPh₃)L is bound by one PPh₃ and one SCNPS fragment of the chelating ligand. Compounds obtained were investigated by IR, UV–Vis, ¹H and ³¹P{¹H} NMR spectroscopy, and microanalysis. The structures of HL and Cu(PPh₃)L were investigated by single crystal X-ray diffraction analysis.     

Influence of multidentate N-donor ligands on highly electrophilic zinc initiator for the ring-opening polymerization of epoxides

A set of multidentate ligands have been synthesized and used to stabilize the putative highly electrophilic zinc species initiating ring-opening polymerization (ROP) of cyclohexene oxide (CHO) and propylene oxide (PO). Reaction of the bidentate C₂-chiral bis(oxazoline) ligand (^R2,R3BOX: R₂ = (4S)-tBu, R₃ = H (a); R₂ = (4S)-Ph, R₃ = H (b); R₂ = (4R)-Ph, R₃ = (5S)-Ph (c)) with Zn(R₁)₂ (R₁ = Et (1), Me (2)) led to the heteroleptic three-coordinate complexes (^R2,R3BOX)ZnR₁, 1a-c and 2a, which were isolated in 92-96% yield. Next, two pyridinyl-functionalized N-heterocyclic carbene (NHC) ligands have been designed and synthesized: the 1,3-bis(2-pyridylmethyl)imidazolinium salt (d) and the protected NHC adduct 2-(2,3,4,5,6-pentafluorophenyl)-1,3-bis(2-pyridylmethyl)imidazolidine (e). The reaction of ligands d and e with ZnEt₂ led directly to the formation of (NHC)ZnEt(Cl) 3d complex with ethane elimination and the adduct (NHC-C₆F₅(H))ZnEt₂4e, respectively, in high yield. In situ combinations of selected complexes 1a-c, 3d and 4e with B(C₆F₅)₃ (1 or 2 equivalents) give active systems for ROP, with high productivity (3.3-5.9 10⁶ g_polym. mol_Zn⁻¹ h⁻¹) and high molecular weight (M_n up to 132 10³ g mol⁻¹) for CHO polymerization. Although the in situ B(C₆F₅)₃-activated zinc species were not isolated, the sterically demanding BOX ligands (1c > 1b > 1a) and functionalized NHC ligands seem to enhance the stability of highly electrophilic zinc complexes over ligand redistribution, allowing a better control of the cationic ROP as reflected particularly for 3d and 4e complexes by their respective efficiency (42-88%).     

Novel Ag(I), Pd(II), Ni(II) complexes of N,N′-bis-(2,2-diethoxyethyl)imidazole-2-ylidene: Synthesis, structures, and their catalytic activity towards Heck reaction

Tetra-ether substituted imidazolium salts, LHX (where LH = N,N′-bis(2,2-diethoxyethyl)imidazolium cation and X = Br, BF₄, PF₆, BPh₄, NO₃ and NTf₂ anions) were derived from imidazole. Attempts to produce aldehyde functionalized imidazolium salt through acid hydrolysis of LHBr resulted an unexpected tetra-hydroxy compound L_AHBr and the dialdehyde compound L_BHBr. Reaction of LHBr with Ag₂O afforded [L₂Ag][AgBr₂] (1). Mononuclear Pd-complex trans-[L₂PdCl₂] (2) and dinuclear Pd-complex [(LPdCl₂)₂] (3) were obtained by 1:1 and 1:2 reaction of in situ generated Ag-carbene with Pd(CH₃CN)₂Cl₂. cis-[LPdPPh₃Cl₂] (4) was synthesized from reaction of PPh₃ with dinuclear complex 3. Hydrolysis of 3 under acidic conditions also generates a hydroxy derivative 3A and the aldehyde derivative 3B. Direct heating of LHBr with Ni(OAc)₂ · 4H₂O at 120 °C under vacuum generated trans-[L₂NiBr₂] (5). These complexes were characterized by NMR, mass, elemental analysis, and X-ray single crystal diffraction analysis. Pd--Pd interaction was observed in 3. All the Pd complexes exhibited excellent catalytic activity in Heck reaction.     

[Ru(NHC)(P-P)(CO)HF] (NHC = N-heterocyclic carbene; P-P = xantphos, dppf) complexes: Efforts to prepare new hydrodefluorination catalysts

The ruthenium N-heterocyclic carbene (NHC) hydride fluoride complexes Ru(NHC)(P-P)(CO)HF (NHC = ICy (3), IEt₂Me₂ (5), P-P = xantphos; NHC = ICy (7), P-P = dppf) have been prepared by treatment of the corresponding dihydride complexes [Ru(NHC)(P-P)(CO)H₂] (NHC = ICy (2), IEt₂Me₂ (4) P-P = xantphos; NHC = ICy (6), P-P = dppf) with Et₃N·3HF. In all cases, the hydride fluoride complexes exist in solution as two conformers or isomers. Although 3, 5 and 7 could be converted back to 2, 4 and 6, respectively, by heating with Et₃SiH, efforts to generate a catalytic cycle for the hydrodefluorination of aromatic fluorocarbons by subsequent reaction of Ru(NHC)(P-P)(CO)H₂ with C₆F₆ were prevented by the much more favourable cyclometallation of the carbene ligand.     

Chiral organotin (IV) carboxylates complexes: Syntheses, characterization, and crystal structures with chiral (S)-(+)-6-methoxy-α-methyl-2-naphthaleneaceto acid ligand

Eight new organotin (IV) carboxylates, (R₃Sn)₄(nap)₄ (R = Me 1, n-Bu 2), [(R₃Sn) (nap)]_n (R = Ph 3, PhCH₂4), (R₂Sn) (nap)₂ (R = n-Bu 5, Ph 6, PhCH₂7) and {[R₂Sn(nap)]₂O}₂ (R = Me 8) (nap = (S)-(+)-6-methoxy-α-methyl-2-naphthaleneaceto anion) have been synthesized. All of the complexes have been characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C and ¹¹⁹Sn) spectra. Among these complexes, complexes 1, 3, 5 and 8 were also characterized by X-ray crystallography diffraction analysis, and the data of X-ray crystallography diffraction indicated that complexes 1, 3 and 5 are new chiral organotin (IV) carboxylates complexes. The structural analyses show that complex 1 has a tetranuclear Sn₄O₈ macrocycle structure, complex 3 has a 1D spring-like chiral helical chain with a columnar channel, complex 5 possesses a dimer structure, and complex 8 has a supramolecular chainlike ladder structure through weak intermolecular non-covalent O^…O interactions.     

Ag(I) and Pd(II) complexes of a 1,3-dibenzhydryl substituted benzannulated N-heterocyclic carbene: Unexpected rearrangement, structures and catalytic studies

Reaction of the sterically bulky 1,3-dibenzhydrylbenzimidazolium bromide (Bh₂-bimyH⁺Br⁻) (A) with Pd(OAc)₂ in DMSO yielded a mono(carbene) Pd(II) complex 1 with a N-bound benzimidazole derivative, which resulted from an unusual NHC rearrangement reaction. Reaction of A with Ag₂O, on the other hand, cleanly gave the Ag(I) carbene complex [AgBr(Bh₂-bimy)] (2), which has been used as a carbene-transfer agent to prepare the acetonitrile complex trans-[PdBr₂(CH₃CN)(Bh₂-bimy)] (3). Dissociation of acetonitrile from complex 3 and subsequent dimerization afforded the dinuclear Pd(II) complex [PdBr₂(Bh₂-bimy)]₂ (4) in quantitative yield. All complexes were fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry and X-ray diffraction analysis. Furthermore, the catalytic activity of complex 4 in aqueous Suzuki-Miyaura cross-coupling reactions was studied and compared with that of its previously reported less bulky analogue [PdBr₂(ⁱPr₂-bimy)]₂.     

Rhodium(I) carbonyl complexes of quinoline carboxaldehyde ligands and their catalytic carbonylation reaction

The dimeric rhodium precursor [Rh(CO)₂Cl]₂ reacts with quinoline (a) and its three isomeric carboxaldehyde ligands [quinoline-2-carboxaldehyde (b), quinoline-3-carboxaldehyde (c), and quinoline-4-carboxaldehyde (d)] in 1:2 mole ratio to afford complexes of the type cis-[Rh(CO)₂Cl(L)] (1a-1d), where L = a-d. The complexes 1a-1d have been characterised by elemental analyses, mass spectrometry, IR and NMR (¹H, ¹³C) spectroscopy together with a single crystal X-ray structure determination of 1c. The X-ray crystal structure of 1c reveals square planar geometry with a weak intermolecular pseudo dimeric structure (Rh?Rh = 3.573 Å). 1a-1d undergo oxidative addition (OA) with different electrophiles such as CH₃I, C₂H₅I and I₂ to give Rh(III) complexes of the type [Rh(CO)(COR)Cl(L)I] {R = -CH₃ (2a-2d), R = -C₂H₅ (3a-3d)} and [Rh(CO)Cl(L)I₂] (4a-4d) respectively. 1b exhibits facile reactivity with different electrophiles at room temperature (25 °C), while 1a, 1c and 1d show very slow reactivity under similar condition, however, significant reactivity was observed at a temperature ∼40 °C. The complexes 1a-1d show higher catalytic activity for carbonylation of methanol to acetic acid and methyl acetate [Turn Over Frequency (TOF) = 1551-1735 h⁻¹] compared to that of the well known Monsanto’s species [Rh(CO)₂I₂]⁻ (TOF = 1000 h⁻¹) under the reaction conditions: temperature 130 ± 2 °C, pressure 33 ± 2 bar, 450 rpm and time 1 h. The organometallic residue of 1a-1d was also isolated after the catalytic reaction and found to be active for further run without significant loss of activity.     

New N-heterocyclic carbene mercury(II) complexes: Close mercury-arene interaction

Mononuclear mercury complexes (1, 2, and 3) bearing bis-N-heterocyclic carbene (NHC) ligands of the form [(NHC)₂-μ-Hg]⁺² have been prepared and structurally characterised. The complexes were derived from three bis-imidazolium salts as precursors to NHC; either 1,3-bis(N-methylimidazolium-1-ylmethyl)benzene bis(hexafluorophosphate) (I·2PF₆), 1,3-bis(N-butylimidazolium-1-ylmethyl)benzene bis(hexafluorophosphate) (II·2PF₆) or 3,5-bis(N-butylimidazolium-1-ylmethyl)toluene bis(hexafluorophosphate) (III·2PF₆) treated with mercury(II) acetate. Interestingly X-ray crystal structure analysis revealed a close interaction between the Hg metal centre with one carbon atom of the aryl linker in addition to coordination with two NHCs.     

Silver N-heterocyclic carbene complexes as initiators for bulk ring-opening polymerization (ROP) of l-lactides

Synthetic, structural and catalysis studies of two silver complexes namely, {[1-(2,4,6-trimethylphenyl)-3-(N-phenylacetamido)imidazol-2-ylidene]₂Ag}⁺Cl⁻1b, supported over an amido-functionalized N-heterocyclic carbene ligand, and [1-(i-propyl)-3-(benzyl)imidazol-2-ylidene]AgCl 2b, supported over a non-functionalized N-heterocyclic carbene ligand, are reported. Specifically, 1b, a cationic complex bearing 2:1 NHC ligand to metal ratio, was obtained from the reaction of 1-(2,4,6-trimethylphenyl)-3-(N-phenylacetamido)imidazolium chloride 1a with Ag₂O in 52% yield. The corresponding 1a was synthesized by the alkylation reaction of 1-(2,4,6-trimethylphenylimidazole) with N-phenyl chloroacetamide in 73% yield. The other silver complex 2b, a neutral complex bearing 1:1 NHC ligand to metal ratio, was obtained from the reaction of 1-(i-propyl)-3-(benzyl)imidazolium chloride 2a with Ag₂O in 42% yield. The 2a was synthesized by the alkylation reaction of 1-(i-propylimidazole) with benzyl chloride in 45% yield. The molecular structures of the imidazolium chloride, 1a, and the silver complexes, 1b and 2b, have been determined by X-ray diffraction studies. The silver complexes, 1b and 2b, successfully catalyze bulk ring-opening polymerization (ROP) of l-lactides at elevated temperatures under solvent-free melt conditions producing moderate to low molecular weight polylactide polymers having narrow molecular weight distributions.     

Bimacrocyclic NHC transition metal complexes

The preparation of seven concave NHC metal complexes derived from bimacrocyclic imidazolinium salt 1 is reported. The silver complex 2, obtained in 86% yield by reacting 1 with silver(I) oxide, was used to give copper complex 3, rhodium complex 5 and iridium complex 6 by transmetalation in good yields. Palladium complex 4 was obtained by reaction of the azolium salt 1 with palladium dichloride in 3-chloropyridine. The rhodium and iridium dicarbonyl complexes 7 and 8 were prepared via ligand exchange from the COD complexes 5 and 6. Silver complex 2, copper complex 3 and palladium complex 4 were characterized by single-crystal X-ray analysis. Silver complex 2 and copper complex 3 were tested in the cyclopropanation of styrene and indene with EDA (ethyl diazoacetate), where good results were obtained with 3, while low conversion and catalyst decomposition was observed with 2.     

N-heterocyclic carbene complexes of Zn(II): synthesis, X-ray structures and reactivity

The synthesis of six novel zinc (II) mono(N-heterocyclic carbene) complexes is described. 1,3-Bis(mesityl)-imidazol-2-ylidene was reacted with the zinc salts ZnX₂ (X=Cl, CH₃COO, PhCOO, and PhCH₂COO) to yield the corresponding monomeric Zn-NHC complex ZnCl₂(NHC)(THF) (1) and dimeric [Zn(OOCCH₃)₂(NHC)]₂ (2), [Zn(OOCPh)₂(NHC)]₂ (3), [Zn(OOCCH₂Ph)₂(NHC)]₂ (4) (NHC=1,3-bis(mesityl)-imidazol-2-ylidene). Reaction of 1 with 2 equivalents of silver trifluoromethanesulfonate yielded monomeric Zn(O₃SCF₃)₂(NHC)(THF) (5), reaction of 1 with sodium {[R(+)-α-2-(1-phenyl-ethylimino)-methyl]-phenolate} yielded monomeric ZnCl(OC₆H₄-2-CHN(CHPhCH₃)(NHC) (6). Compounds 1, 4-6 were structurally characterized by X-ray analysis. Selected compounds were investigated for their activity in the copolymerization of carbon dioxide with cyclohexene oxide as well as in the ring-opening polymerization of cyclohexene oxide and ε-caprolactone.     

Co-ligand effects in the catalytic activity of Pd(II)-NHC complexes

Three cis-chelating di-N-heterocyclic carbene palladium(II) complexes [PdX₂(diNHC)] (X = I, 1; X = SCN, 2; X = CF₃CO₂, 3) bearing different anionic co-ligands were synthesized and fully characterized. A comparison of their catalytic activities in the Mizoroki-Heck reaction and conjugate addition of arylboronic acids to cyclic enones revealed increasing efficiency in the order SCN⁻ < I⁻ < CF₃CO₂⁻. The di(trifluoroacetato) complex 3 showed the best activity in both transformations highlighting the importance of co-ligands effects in catalysis. In addition, the molecular structure of an unusual poly-heteronuclear complex salt 4 is reported, which has been isolated as a byproduct in the synthesis of complex 3.     

Endo and exo cyclometallated iron carbonyl complexes derived from N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine

The reaction of N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine (1) with Fe₂(CO)₉ in refluxing toluene gives endo cyclometallated iron carbonyl complexes 2 and 5, exo cyclometallated iron carbonyl complex 3, and unexpected iron carbonyl complex 4. Complexes 2, 3, and 5 are geometric isomers. Complex 5 differs from complex 2 in the switch of the original substituent from α to β position of the pyrrolyl ring, and the pyrrolyl ring bridges to the diiron centers in μ-(3,2-η¹:η²) coordination mode in stead of μ-(2,3-η¹:η²). In complex 4, the pyrrolyl moiety of the original ligand 1 has been displaced by a thienyl group, which comes from the same ligand. Single crystals of 2, 3, and 5 were subjected to the X-ray diffraction analysis. The major product 2 undergoes: (i) thermolysis to recover the original ligand 1; (ii) reduction to form a hydrogenation product, 6, of the original ligand; (iii) substitution to form a monophosphine-substituted complex 7; (iv) chemical as well as electrochemical oxidation to produce a carbonylation product, γ-butyrolactam 8.     

Synthesis and characterization of Cu(I) and Cu(II) complexes containing ketiminate ligands

A series of Cu(I) and Cu(II) complexes containing substituted ketiminate ligands was synthesized. Reaction of CuCl₂ with 2 equiv. of Li[OC(Me)CHC(Me)N(Ar)] in toluene generated dark green solid of Cu[OC(Me)CHC(Me)N(Ar)]₂ (1). Similarly, Cu(I) complex, {Cu[OC(Me)CHC(Me)N(Ar)]Li[OC(Me)CHC(Me)N(Ar)]}₂ (2) was synthesized by reacting 2 equiv. of Li[OC(Me)CHC(Me)N(Ar)] with CuCl in toluene at room temperature for 12 h. While the reaction of CuCl with Li[OC(Me)CHC(Me)N(Ar)] in the presence of triphenylphosphine in THF solution at room temperature, a three-coordinated Cu[OC(Me)CHC(Me)N(Ar)](PPh₃) (3) can be isolated in high yield. Replacing the PPh₃ of 3 with N-heterocarbene (NHC) generates Cu[OC(Me)CHC(Me)N(Ar)](NHC) (4) in low yield. Complexes 2, 3, and 4 were characterized by ¹H and ¹³C NMR spectroscopies and all molecules were structurally characterized by X-ray diffractometry. Two coordination modes of ketiminate ligands were found in the molecular structure of 2, one of which is copper-coordinated terminal ketiminates and the other is lithium-copper-coordinated bridging ketiminates.     

Syntheses, crystal structures and properties of Co(II) complexes with N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethyleneimine (bpb), and Cd(II), Hg(II) complexes with reduced bpb

Five novel coordination polymers, [Co(bpb)₂Cl₂] (1), [Co(bpb)₂(SCN)₂] (2), [Cd(H₄bpb)_0.5(dmf)(NO₃)₂] (3), [Cd₂(H₄bpb)Br₄] (4), and [Hg₂(H₄bpb)I₄] (5) [bpb=N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethyleneimine, H₄bpb=N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethylamine], were synthesized and their structures were determined by X-ray crystallography. In the solid state, complex 1 is a 1D hinged chain, while 2 has 2D network structure with the ligand bpb serving as a bridging ligand using its two pyridyl N atoms. The imine N atoms keep free of coordination and bpb acts as a bidentate ligand in both 1 and 2. Complexes 3, 4, and 5 with reduced bpb ligand, i.e. H₄bpb, show similar 2D network structure, in which ligand H₄bpb serves as a tetradentate ligand. Thermogravimetric analyses for complexes 1-5 were carried out and found that they have high thermal stability. The magnetic susceptibilities of compounds 1, 2 were measured over a temperature range of 75-300 K.     

Novel 1D Cu(I) coordination polymers formed by the combination of Cu(I) halides and 4-(2-pyridyl)pyrimidine

Three novel 1D Cu(I) coordination polymers [Cu₄X₄(pprd)₂]_n (X = Cl(1), Br(2) and I(3); pprd = 4-(2-pyridyl)pyrimidine) were systematically synthesized by Cu(I) halides and the pprd ligand, and they have been characterized by X-ray, IR, and TG-DTA analyses. The molecular structure of complex 1 essentially resembles to that of complex 2. In complexes 1 and 2, four Cu(I) atoms are bridged by four Cl or Br anions to form an eight-membered Cu₄X₄ framework in the twist-chair form. Furthermore, the Cu₄X₄ frameworks are coordinated by the chelate and bridging sites of two pprd ligands to form a unique 1D two-stepped Cu(I) coordination polymer, in which two stairs are formed by the Cu₄X₄ core and two heteroaromatic planes of pprd. In the crystal packing structures, it is interesting that two heteroaromatic planes of pprd are stacking along the b-axis for complex 1 and the a-axis for complex 2. In contrast, four Cu(I) atoms in complex 3 are bridged by four I atoms to form a Cu₄I₄ stepped cubane tetramer. Additionally, the Cu₄I₄ stepped cubane cores are linked by the chelate and bridging sites of two pprd ligands to form an infinite 1D zigzag-chain Cu(I) coordination polymer. The thermal decomposition behaviors for Cu(I)–X/pprd complexes 1, 2 and 3 were determined by thermogravimetric analysis (TG-DTA). Although the thermal decomposition behaviors of complex 1 were unidentified, those of complexes 2 and 3 were assigned. The mass loss at the first stage of thermal decomposition for polymeric [Cu₄X₄(pprd)₂]_n was identical to the formation of oligomeric [Cu₄X₄(pprd)] by the elimination of one pprd molecule. The mass loss at the next stage was decided to the formation of Cu₄X₄ by the elimination of another pprd molecule.     

Symmetrically bridged bis-N-heterocyclic carbene rhodium (I) complexes and their catalytic application for transfer hydrogenation reaction

Bridged rhodium(I) bis(NHC) complexes of the formula [bis-(NHC)Rh(I)PF₆] (1c-5c) were synthesized and applied as catalysts in the transfer hydrogenation of acetophenone in 2-propanol. The activity of the rhodium(I) complexes largely depends on the nature of the N-substituents and the applied bases. The synthesized compounds were characterized by elemental analysis, ¹H and ¹³C NMR-spectroscopy and mass spectrometry. The structure of complex 2c was exemplary determined by X-ray analysis.     

The influence of moisture on deprotonation mode of imidazolinium chlorides with palladacycle acetate dimer

Deprotonation of 1,3-diorganyl imidazolinium salts, 1, with N,C-type palladacyclic acetate dimer 2 afforded novel NHC coordinated complexes 3 along with ring opening hydrolysis products 4, which may coordinate to palladium center via NH group to give 5a. The hydrolysis necessitates the study of NHC complex formation in anhydrous media. The new compounds were characterized by spectroscopic methods and three of them (3c, 4c, 5a) by X-ray single-crystal diffraction studies.