Use of tetrahydropyrimidinium salts for highly efficient palladium-catalyzed cross-coupling reactions of aryl bromides and chlorides

New, sterically demanding 1,3-dialkyl-3,4,5,6-tetrahydropyrimidinium salts (2) as NHC precursors have been synthesized and characterized. These salts, in combination with palladium acetate, provided active catalysts for the cross-coupling of aryl chlorides and bromides under mild conditions. The catalytic system was applied to the Heck, Suzuki and benzaldehyde (Kumada) coupling reactions. Catalyst activity was found to be influenced by the presence of a methoxy group on the ring of the p-position of benzyl substituent of the ligand precursor.     

A neutral, water-soluble olefin metathesis catalyst based on an N-heterocyclic carbene ligand

A water-soluble ruthenium-based olefin metathesis catalyst supported by a poly(ethylene glycol) conjugated N-heterocyclic carbene ligand is reported. The catalyst displays greater activity in aqueous ring-opening metathesis polymerization (ROMP) reactions than previously reported water-soluble metathesis catalysts.     

[(NHC)(NHCewg)RuCl2(CHPh)] Complexes with Modified NHCewg Ligands for Efficient Ring‐Closing Metathesis Leading to Tetrasubstituted Olefins

Imidazolium salts (NHC_ewg ? HCl) with electronically variable substituents in the 4,5‐position (H,H or Cl,Cl or H,NO₂ or CN,CN) and sterically variable substituents in the 1,3‐position (Me,Me or Et,Et or iPr,iPr or Me,iPr) were synthesized and converted into the respective [AgI(NHC)_ewg] complexes. The reactions of [(NHC)RuCl₂(CHPh)(py)₂] with the [AgI(NHC_ewg)] complexes provide the respective [(NHC)(NHC_ewg)RuCl₂(CHPh)] complexes in excellent yields. The catalytic activity of such complexes in ring‐closing metathesis (RCM) reactions leading to tetrasubstituted olefins was studied. To obtain quantitative substrate conversion, catalyst loadings of 0.2–0.5 mol % at 80 °C in toluene are sufficient. The complex with the best catalytic activity in such RCM reactions and the fastest initiation rate has an NHC_ewg group with 1,3‐Me,iPr and 4,5‐Cl,Cl substituents and can be synthesized in 95 % isolated yield from the ruthenium precursor. To learn which one of the two NHC ligands acts as the leaving group in olefin metathesis reactions two complexes, [(FL‐NHC)(NHC_ewg)RuCl₂(CHPh)] and [(FL‐NHC_ewg)(NHC)RuCl₂(CHPh)], with a dansyl fluorophore (FL)‐tagged electron‐rich NHC ligand (FL‐NHC) and an electron‐deficient NHC ligand (FL‐NHC_ewg) were prepared. The fluorescence of the dansyl fluorophore is quenched as long as it is in close vicinity to ruthenium, but increases strongly upon dissociation of the respective fluorophore‐tagged ligand. In this manner, it was shown for ring‐opening metathesis ploymerization (ROMP) reactions at room temperature that the NHC_ewg ligand normally acts as the leaving group, whereas the other NHC ligand remains ligated to ruthenium.     

Synthesis of Pd complexes bearing an enantiomerically resolved seven-membered N-heterocyclic carbene ligand and initial studies of their use in asymmetric Wacker-type oxidative cyclization reactions

The development of enantiomerically resolved, axially-chiral seven-membered N-heterocyclic carbene (⁷NHC) ligands for palladium is described. These ⁷NHC ligands are derived from enatiomerically pure 2,2′-diamino-6,6′-dimethylbiphenyl, which is transformed via a synthetic sequence consisting of ortho-arylation, N-alkylation, and cyclization to afford seven-membered-ring amidinium salts. Synthesis of the seven-membered amidinium salts benefits from microwave irradiation, and in-situ metalation of the amidinium salts yields ⁷NHC-Pd^II complexes. The chiral ⁷NHC-Pd complexes were examined as chiral catalysts under aerobic conditions in two intramolecular oxidative amination reactions of alkenes. In one case, enantioselectivities up to 63% ee were obtained, while the other substrate underwent cyclization to afford essentially racemic products. The catalytic data compare favorably to results obtained with a Pd^II catalyst bearing a chiral five-membered-ring NHC ligand and, thereby, highlight the potential significance of this new class of chiral NHC ligands.     

Air-stable CpPd(NHC)Cl (NHC = N-heterocyclic carbene) complexes as highly active precatalysts for Kumada-Tamao-Corriu coupling of aryl and heteroaryl chlorides

A very straightforward one-pot method has been developed for preparation of air-stable CpPd(NHC)Cl complexes 1a-d. This new class of well-defined NHC-Pd complexes exhibits high catalytic activity in Kumada-Tamao-Corriu cross-coupling reaction involving various aryl and heteroaryl chlorides. Notably, the less sterically encumbered NHC ligand around Pd centre showed higher catalytic activity.     

Polyisobutylene-supported N-heterocyclic carbene palladium catalysts

This paper describes how the nonpolar polymer polyisobutylene (PIB) can be used as a handle to prepare PIB-bound NHC ligands that are soluble in monophasic mixtures of mixed solvents but phase separable when such solvent systems are perturbed to be biphasic. The results here show that such PIB-bound NHC ligands can be used to synthesize useful palladium catalysts. In this paper, both PIB-bound analogs of an N,N′-bis(2,6-diisopropylphenyl) heterocyclic carbene and simpler N,N′-dialkyl heterocyclic carbene ligand were prepared and were successfully used to form palladium cross-coupling catalysts. The reactivity, recycling and reusability of these catalysts has been examined.     

Facile synthesis of [(NHC)(NHCewg)RuCl2(CHPh)] complexes

The utility of [(NHC)(PPh₃)RuCl₂(CHPh)] for the facile and efficient synthesis of ten complexes of the type [(NHC)(NHC_ewg)RuCl₂(CHR)] with saturated and unsaturated NHC ligands in 85-94% isolated yield via a simple one step synthesis utilizing [AgI(NHC_ewg)] as NHC_ewg transfer reagents was demonstrated.     

Synthesis and characterization of bidentate NHC-Pd complexes and their role in amination reactions

The new well-defined and air-stable ortho-xylyl-linked N-heterocyclic carbene (NHC) Pd complexes (2a-d) have been synthesized and characterized by elemental analysis, ¹H NMR, ¹³C NMR, IR spectroscopy, and single crystal X-ray diffraction studies. The palladium atom in the complex 2a lies on a crystallographic mirror plane and can be described as having a square-planar coordination environment with the carbene atoms of the benzimidazole rings of the ligand occupying two coordination sites in cis positions. Two further coordination sites are occupied by chloride ligands. The benzimidazole rings are connected to each other by an ortho-xylyl bridge. The catalytic activity of these palladium complexes has been tested in the coupling reactions of various N-containing substrates with bromobenzene. A preliminary catalytic study shows that the bis(NHC)-Pd complexes are highly active in the Buchwald-Hartwig amination reaction.     

A new class of o-hydroxyaryl-substituted N-heterocyclic carbene ligands and their complexes with palladium

A facile synthesis of o-hydroxyaryl-substituted N-heterocyclic carbene ligands and their complexes with palladium is presented. This kind of salicylaldimine-like NHC ligands expands the class of available NHC ligands for organometallic catalysts.     

Synthesis of rhodium N-heterocyclic carbene complexes and their catalytic activity in the hydrosilylation of alkenes in ionic liquid medium

Rhodium complexes bearing N-heterocyclic carbene (NHC) ligands were prepared from bis(η⁴-1,5-cyclooctadiene) dichlorodirhodium and 1-alkyl-3-methylimidazolium-2-carboxylate, and the catalytic properties of rhodium complexes prepared in the hydrosilylation of alkenes in ionic liquid media were investigated. It was found that both the catalytic activity and selectivity of the rhodium complexes bearing NHC ligands were influenced by the attached substituents of the imidazolium cation. Additionally, rhodium complexes bearing NHC ligands in ionic liquid BMimPF₆ could be reused without noticeable loss of catalytic activity and selectivity.     

Butylene linked palladium N-heterocyclic carbene complexes: Synthesis and catalytic properties

New bis(NHC)-Pd complexes were synthesized and characterized by elemental analysis, ¹H NMR, ¹³C NMR, and IR spectroscopy. The reaction of Pd(OAc)₂ and bis(benzimidazolium) salts in DMSO gave the monomeric palladium complex in which the N-heterocyclic carbene was bound to the metal centre. The crystal and molecular structure of the cis-dibromo{1,1′-di[2,3,4,5,6-pentamethylbenzyl]-3,3′-butylenedibenzimidazol-2,2′-diylidene}-palladium(II) complex was determined by single-crystal X-ray diffraction. The activity of the Pd(II) complexes in the direct arylation of benzothiazole with arylbromides was investigated. A preliminary catalytic study showed that these bis(NHC)-Pd complexes were highly active in the direct arylation of benzothiazole with arylbromides.     

Allylic alkylation and amination using mixed (NHC)(phosphine) palladium complexes under biphasic conditions

A dramatic improvement of the catalytic activity was observed when a phosphine was added in allylic alkylation reactions catalyzed by (NHC)Pd(η³-C₃H₅)Cl complexes. Consequently, several palladium complexes, generated in situ from different NHC-silver complexes, [Pd(η³-C₃H₅)Cl]₂ and PPh₃, were tested in this reaction to evaluate their potential. High reaction rates and conversions could be obtained with this catalytic system in the alkylation of allylic acetates with dimethylmalonate, particularly under biphasic conditions using water/dichloromethane and KOH 1 M as the base. These conditions are experimentally more convenient and gave higher reaction rates than the classical anhydrous conditions (NaH/THF). In this system, the phosphine is essential since no conversion was obtained when it is not present. The steric hindrance of the carbene ligand has a great influence on the activity and the stability of the catalytic system. The best NHC ligands for this reaction are either 1-mesityl-3-methyl-imidazol-2-ylidene or 1-(2,6-diisopropylphenyl)-3-methyl-imidazol-2-ylidene which are less bulky among the NHC tested. These two ligands led in 5 min to a complete conversion at 20 °C. The Pd-catalyzed allylic amination reaction using (E)-1,3-diphenylprop-3-en-yl acetate and benzylamine was also tested with (NHC)(PPh₃)Pd complexes and under the biphasic conditions. This reaction was found to be slower than the alkylation with dimethylmalonate but a complete conversion could be reached in 6 h at 20 °C using K₂CO₃ 1 M as the base. NMR experiments indicated that mixed (NHC)(PPh₃)Pd complexes are formed in situ but their structure could not be established exactly.     

Preparation of polymer-supported palladium/N-heterocyclic carbene complex for Suzuki cross-coupling reactions

A novel polymer-supported N-heterocyclic carbene (NHC) was prepared from chloromethyl polystyrene (CM PS) resin using a simple procedure, and was used as the ligand for palladium (Pd) catalysts. The polymer-supported Pd-NHC complexes efficiently catalyzed the Suzuki cross-coupling of aryl halides and phenylboronic acid in good yields and excellent purities under aqueous conditions.     

1,3-Diarylimidazolidin-2-ylidene (NHC) complexes of Pd(II): Electronic effects on cross-coupling reactions and thermal decompositions

The synthesis of 1,3-diarylimidazolidin-2-ylidene (NHC) precursor, 1,3-bis(2,4,6-trimethylphenyl)imidazolinium chloride, (3b) has been extended to the electronically and sterically modified NHC precursors 3a (X = H), 3c (X = Br) and 3e (X = Cl) in order to investigate the electronic effect of a p-substituent (X) on cross-coupling catalysts. Complexes of the type PdCl₂(NHC)₂ (5), PdCl₂(NHC)(PPh₃) (6) and [RhCl(NHC)(cod)] (7) were prepared from 3 or 4d (1,3-bis(2,4-dimethylphenyl)-2-trichloromethylimidazolidin). Initial decomposition temperatures of the complexes 5 and 6 were determined by TGA. In situ formed complexes from Pd(OAc)₂ and 3 as well as the preformed complexes 5 and 6 have been tested as catalysts in coupling of phenylboronic acid with 4-haloacetophenones. The electron donating ability of NHCs derived from 3 was assessed by measuring C-O frequencies in the respective [RhCl(NHC)(CO)₂] complex 8 which was prepared by replacement of cod ligand of 7 with CO. An interesting correlation between the electron-donating nature of the aryl substituent and catalytic activity and also initial decomposition temperature of the complexes 5 and 6 was observed.     

Synthesis and structures of cyclopentadienyl N-heterocyclic carbene copper(I) complexes

A series of cyclopentadienyl N-heterocyclic carbene copper complexes CpCu(NHC) were synthesized and structurally characterized. The effect of the substituents at the nitrogen atom of the NHC ligands on the structures and thermally stability was discussed.     

N-Heterocyclic carbene-catalyzed dehydration of α,ω-disilanol oligomers

An efficient polycondensation reaction of α,ω-dihydroxy oligodimethylsiloxanes, catalyzed by N-heterocyclic carbenes (NHC), is developed for the first time. Surprisingly, in this polymerization, the moisture sensitive NHC catalyze the dehydration of disilanol oligomers, and remains intact. This result demonstrates the compatibility of NHCs with the intervention of H₂O in catalytic reactions.     

γ-Selective allylic substitution reaction with Grignard reagents catalyzed by copper N-heterocyclic carbene complexes and its application to enantioselective synthesis

The reaction of allylic compounds with alkyl Grignard reagents in the presence of a catalytic amount of copper N-heterocyclic carbene (NHC) complexes proceeded predominantly in an S_N2′ reaction pathway to give γ-substituted product in excellent yield. The method was applied to asymmetric reaction by using optically active NHC ligands.     

Exploring the Limits of π-Acid Catalysis Using Strongly Electrophilic Main Group Metal Complexes: The Case of Zinc and Aluminium

The catalytic activity of cationic NHC-Zn^II and NHC-Al^III (NHC=N-heterocyclic carbene) complexes in reactions that require the electrophilic activation of soft C−C π bonds has been studied. The former proved able to act as a soft π-Lewis acid in a variety of transformations. The benefit of the bulky IPr NHC ligand was demonstrated by comparison with simple ZnX₂ salts. The tested NHC-Al^III catalyst is not able to activate C−C π bonds but simple AlX₂⁺ ions were found potent in some cases.     

Imidazol(in)ium-2-Carboxylates as N-Heterocyclic Carbene Ligand Precursors for Ruthenium Metathesis Initiators

Summary: Imidazol(in)ium-2-carboxylates were used as N-heterocyclic carbene (NHC) ligand precursors to convert the [RuCl₂(p-cymene)]₂ dimer into three ruthenium-arene complexes of the [RuCl₂(p-cymene)(NHC)] type. The decarboxylation of NHC · CO₂ betaines also provided a convenient synthetic path to prepare five well-known ruthenium-NHC catalysts for olefin metathesis and related reactions, including the second generation Grubbs and Hoveyda–Grubbs catalysts, via ligand exchange with phosphine-containing, first generation ruthenium-benzylidene or indenylidene complexes. Both procedures are particularly attractive from a practical point of view, because NHC · CO₂ adducts are stable zwitterionic compounds that can be stored and handled with no particular precautions.     

Recyclable N-heterocyclic carbene/palladium catalyst on graphene oxide for the aqueous-phase Suzuki reaction

Graphene oxide (GO) was functionalized with a N-heterocyclic carbene (NHC) precursor, 3-(3-aminopropyl)-1-methylimidazolium bromide ([APMIm][Br]) for the immobilization of palladium catalyst. The GO-supported NHC precursor (IMGO) formed a stable complex with Pd(OAc)₂ (GO–NHC–Pd), which showed excellent catalytic activity and fast reaction kinetics in the aqueous-phase Suzuki reaction of aryl bromides and chlorides at relatively mild conditions (1 h at 50 °C). The GO–NHC–Pd catalyst was reused several times without any loss of its catalytic activity in the Suzuki reaction of aryl bromide.