Polystyrene-supported recyclable palladacycle catalyst for Heck, Suzuki and Sonogashira reactions

A new type of soluble polystyrene-supported palladium complex as an excellent and recyclable palladacycle catalyst was discovered for carboncarbon bond formation in Heck, Suzuki and Sonogashira reactions. Precipitation and filtration process for recycling the catalyst was also achieved.     

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate) catalyzed Suzuki, Heck, Sonogashira, and cyanation reactions

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate): a structurally well-defined O-containing transition metal complex is reported as an efficient catalyst for Suzuki, Heck, and Sonogashira cross-coupling reactions. The protocol was also applied successfully for cyanation of aryl halides under milder operating conditions. The system tolerated the coupling of various aryl halides with alkenes, alkynes, and organoboronic acid along with the cyanation of aryl halides providing good to excellent yields of desired products.     

A Manganese Pre‐Catalyst: Mild Reduction of Amides,Ketones, Aldehydes,and Esters

A new (N ‐phosphinoamidinate)manganese complex is shown to be a useful pre‐catalyst for the hydrosilative reduction of carbonyl compounds, and in most cases at room temperature. The Mn‐catalyzed reduction of tertiary amides to tertiary amines, with a useful scope, is demonstrated for the first time by use of this catalyst, and is competitive with the most effective transition‐metal catalysts known for such transformations. Ketones, aldehydes, and esters were also successfully reduced under mild conditions by using this new Mn catalyst.     

Green,cost‐effective and efficient procedure for Heck and Sonogashira coupling reactions using palladium nanoparticles supported on functionalized Fe3O4@SiO2 by polyvinyl alcohol as a highly active,durable and reusable catalyst

A novel heterogenized organometallic catalyst was synthesized by coordinating palladium with polyvinyl alcohol‐functionalized Fe₃O₄@SiO₂ nanospheres. This novel catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscope, field emission scanning electron microscope, dynamic light scattering, UV–vis spectroscopy, X‐ray photoelectron spectroscopy, energy dispersive X‐ray analysis, thermogravimetric analysis and inductively coupled plasma analysis. The prepared palladium nanoparticles supported on polyvinyl alcohol functionalized Fe₃O₄@SiO₂ nanoparticles were successfully applied as a magnetically recyclable catalyst in Heck and Sonogashira coupling reactions in water. They showed remarkable activity toward aryl halides (I, Br, Cl) using very low palladium loading in excellent yields and demonstrated high TONs (mmol of product per mmol of catalyst). Also, the catalyst could be magnetically separated and reused seven times without any appreciable loss of catalytic activity.     

Nucleophilic,Heterocyclic, Carbene-Catalyzed,Solvent-Free,One-Pot Synthesis of Polyhydroquinolines via Multicomponent Hantzsch Reaction: An Efficient and Ecofriendly Approach

A simple, efficient, and ecofriendly one-pot method has been reported for the synthesis of polyhydroquinolines in excellent yield using nucleophilic heterocyclic carbene as catalyst. The generalized approach is the Hantzsch four-component reaction of aromatic aldehyde, ethyl acetoacetate, cyclic 1,3-diketone, and ammonium acetate.     

Solvent-free,microwave-assisted highly efficient,rapid and simple synthesis of biphenyl compounds by using silica based Pd(II) catalyst

To maintain catalytic performance of any catalyst for a long time, the selection of support material is a very important parameter for heterogeneous catalytic systems, and this performance makes the catalyst valuable. In view of its low cost and availability, silica can be considered as a good support material for transition metal ions in the cross coupling reactions. Therefore, this study describes i) silica-gel based palladium catalyst with a long-term catalytic performance, ii) rapid, simple, economic, and green procedure which was developed for Suzuki reactions. The catalyst showed superior reusability (ten runs) and catalytic efficiency against coupling reactions under mild conditions (50°C, 5 min and air atmosphere). Moreover, the catalyst gave partially good reaction yields with aril chlorides which have poor activity in coupling reactions. In addition, an excellent turnover number (TON: 66000) and frequency (TOF: 825000) were obtained using very small catalyst loading (1.5 × 10^?3 mol %). This paper concludes that silica-gel based Pd(II) catalyst and the protocol of synthesis of biaryls were suitable for coupling reactions.     

Flower-like Fe-Co-M (M=S,O, P and Se) Nanosheet Arrays Grown on Nickel Foam as High-efficiency Bifunctional Electrocatalysts

The development of highly efficient, inexpensive, abundant and non-precious metal electrocatalysts is the lifeblood of the hydrogen production industry, especially the hydrogen production industry by electrolysis of water. A Fe-Co-S/NF bifunctional electrocatalyst with nanoflower-like structure was synthesized on three-dimensional porous nickel foam through one-step hydrothermal and one-step high-temperature sulfuration operations, and the material displays high-efficiency electrocatalytic performance. As a catalyst for the hydrogen evolution reaction, Fe-Co-S/NF can drive a current density of 10 mA/cm² at an overpotential of 143 mV with a Tafel slope of 80.2 mV/dec. When it was used as an oxygen evolution reaction catalyst, it exhibits good OER reactivity with a low Tafel slope (82.6 mV/dec) and with requiring only 117 mV overpotential to drive current densities up to 50 mA/cm². In addition, the Fe-Co-S/NF//Fe-Co-S/NF electrolytic cell was assembled, an electrolysis voltage of 1.64 V is required to drive a current density of 50 mA/cm², which is one of the most active catalysts reported so far. This work indicates that the introduction of S, P and Se treating processes could effectively improve electrical conductivity of the material and enhance the catalytic activity of the material. This work offers an effective and convenient method for improving the morphology of the catalyst, increasing the surface area of the catalyst and developing high-efficiency and low-cost catalysts.     

Na-W-Mn/SiO2催化剂表面甲烷脉冲反应Ⅱ. 多组分Na、 W、 Mn/SiO2催化剂

制备了多组分Na,W,Mn/SiO2催化剂，在ITD（Ion Trap Detector)装置上进行了催化剂表面晶格氧脱附前后的甲烷恒温脉冲反应（CH4－CTPR）。研究结果表明，Na-W/SiO2催化剂表面晶格氧，具有较高的CH4转化率和C2烃选择性，并对C2H6的生成起着重要的作用，Na-Mn/SiO2催化剂表面晶格氧，也具有较高的CH4转化率和C2烃选择性，但对C2H6的形成有一定的诱导期；W－Mn/SiO2催化剂表面晶格氧，对CH4的转化和CO2的生成具有很高初活性，但对C2烃的选择性较低；Na-W-Mn/SiO2催化剂表面晶格氧，具有很高的CH4转化率和C2烃定向选择性，这是由于Na,W,Mn各组分协同作用的结果。     

CuII@PAA/PVC mesoporous fibers: A hybrid wedding as a high-performance versatile heterogeneous catalyst for A3, KA2, and decarboxylative A3 reactions

Efforts made on the development of a novel, simple, cost-effective, and efficient approach to fabricate a copper catalyst immobilized on mesoporous poly (acrylic acid)/poly (vinyl chloride) hybrid fibers (Cu^II@PAA/PVC) for versatile catalytic applications in A₃, KA₂, and decarboxylative A₃ couplings has been described in this present work. The characterization of the mesoporous hybrid fibers was well performed by BET, FTIR, SEM, EDX, XPS, and TGA techniques. The pore structure and surface area were calculated by using BET measurement analysis. The obtained mesoporous Cu^II@PAA/PVC fibers exert high catalytic performance in the synthesis of propargylamines via one-pot A₃, KA₂, and decarboxylative A₃ reactions over a series of substrates without employing expensive ligands or inert atmosphere. The active Cu²⁺ species chelating with carboxylate groups in PAA/PVC hybrid fibers plays a key role in the catalysis. Meanwhile, the unique mesoporous structure and fiber morphology facilitate a better mass transfer and enlarge its contact area with substrates in the course of a reaction. Moreover, the Cu²⁺–carboxylate chelation could suppress the leaching of active Cu²⁺ species from the catalyst and thus lead to the catalyst has excellent performance and good durability as well as reusability.     

Noncovalent Bifunctional Organocatalysts: Powerful Tools for Contiguous Quaternary‐Tertiary Stereogenic Carbon Formation,Scope, and Origin of Enantioselectivity

Relying on the assembly of commercially available catalyst building blocks, highly stereocontrolled quaternary carbon (all carbon substituted) formation has been achieved with unmatched substrate diversity. For example, the in situ assembly of a tricomponent catalyst system allows α‐branched aldehyde addition to nitroalkene or maleimide electrophiles (Michael products), while addition to an α‐iminoester affords Mannich reaction products. Very good yields are observed and for fifteen of the eighteen examples 96–99 % ee is observed. Using racemic α‐branched aldehydes, two contiguous (quaternary–tertiary) stereogenic centers can be formed in high diastereo‐ and enantiomeric excess (eight examples) via an efficient in situ dynamic kinetic resolution, solving a known shortcoming for maleimide electrophiles in particular. The method is of practical value, requiring only 1.2 equiv of the aldehyde, a 5.0 mol % loading of each catalyst component, for example, O‐tBu‐L ‐threonine (O‐tBu‐L ‐Thr), sulfamide, DMAP or O‐tBu‐L ‐Thr, KOH, and room temperature reactions. As a highlight, the first demonstration of ethylisovaleraldehyde ( 7 ) addition is disclosed, providing the most congested quaternary stereogenic carbon containing succinimide product ( 8 ) known to date. Finally, mechanistic insight, via DFT calculations, support a noncovalent assembly of the catalyst components into a bifunctional catalyst, correctly predict two levels of product stereoselectivity, and suggest the origin of the tricomponent catalyst system’s exceptionality: an alternative hydrogen bond motif for the donor‐acceptor pair than currently suggested for non‐assembled catalysts.     

Boehmite@tryptophan‐Pd nanoparticles: A new catalyst for C–C bond formation

A boehmite@tryptophan‐Pd nanoparticulate catalyst was prepared by a simple, fast and convenient route. The nanomaterial was characterized using various techniques and employed as a thermally stable catalyst for Heck, Stille and Suzuki cross‐coupling reactions. Optimized conditions for these reactions are described. The catalyst could be isolated, post‐reaction, by simple filtration and recycled for several consecutive cycles without a notable change in its activity.     

Efficient Copper-Catalyzed Highly Stereoselective Synthesis of Unprotected C-Acyl Manno-, Rhamno- and Lyxopyranosides

Due to their high stability towards enzymatic hydrolysis C-acyl glycosidic compounds are useful synthetic intermediates for potential candidates in drug discovery. Syntheses for C-acyl mannosides have remained scarce and usually employ donors obtained from lengthy syntheses. Furthermore, syntheses of unprotected C-acyl mannosides have not been reported so far, due to the incapability of the C-acyl mannoside motif with deprotection conditions for protective groups commonly used in carbohydrate chemistry. Herein, we report an efficient and highly α-selective four-step one-pot method for the synthesis of C-acyl α-d -manno-, l -rhamno- and d -lyxopyranosides from easily accessible persilylated monosaccharides and dithianes requiring only trace amounts of a copper source as catalyst and explain the crucial role of the catalyst by mechanistic studies. Furthermore, the C-acyl α-glycosides were easily isomerized to give rapid access to their β-anomers.     

Ionic liquid-containing polyethylene supported palladium: a green,highly efficient and stable catalyst for Suzuki reaction

The Suzuki coupling was carried out using a new, efficient and reusable polymer-supported Pd/IL catalyst (PEt@IL/Pd) under aqueous conditions. This catalyst was prepared through coacervation approach followed by treatment with Pd(OAc)₂. The FT-IR, SEM, TGA, TEM, XPS, ICP and EDX techniques were employed to characterize the PEt@IL/Pd. This catalyst exhibited high activity in the Suzuki coupling reaction under green conditions. Moreover, the catalyst could be recycled and reapplied for six times with no appreciable loss in its activity. The leaching test also showed high stability of catalytic Pd species under applied conditions.     

Highly efficient silica gel-supported 1,2-diaminocyclohexane-Pd catalyst for Suzuki-Miyaura and Sonogashira coupling reactions

A palladium (Pd) catalyst was prepared by immobilization of a 1,2-diaminocyclohexane based Pd-complex onto amorphous silica gel and its applications as a heterogeneous catalyst for Suzuki-Miyaura and Sonogashira coupling reactions are described. The catalyst was highly efficient, reusable and air-stable. An erratum to this article is available at .     

Convenient,multicomponent, one-pot synthesis of highly substituted pyridines under solvent-free conditions

Highly substituted pyridine derivatives have been accessed through an efficient, one-pot, multicomponent reaction of aldehydes, malononitrile, and ammonium acetate in the presence of triethylamine as a catalyst under solvent-free conditions. This procedure affords the desired products in high purity and has advantages such as short reaction time, excellent yields, and simple workup procedure. This procedure affords the desired products in moderate to high yields and has such advantages as short reaction time and simple workup procedure.     

Preparation and characterization of Cu supported on 2-(1H-benzo[d]imidazol-2-yl)aniline-functionalized Fe3O4 nanoparticles as a novel magnetic catalyst for Ullmann and Suzuki cross-coupling reactions

Copper supported on 2-(1H-benzo[d]imidazol-2-yl)aniline (BIA)-functionalized Fe₃O₄ nanoparticles (Cu-BIA-Si-Fe₃O₄) as a novel magnetic catalyst was designed and used for the synthesis of new products via Ullmann and Suzuki cross-coupling reactions. The Ullmann reaction was performed by mixing arylboronic acid with aniline derivatives in dimethylsulfoxide solvent. Also, diaryls were synthesized via Suzuki C–C reactions between aryl halides and phenylboronic acid in the same solvent. The prepared materials and catalyst were characterized with various analytical techniques. The Cu-BIA-Si-Fe₃O₄ catalyst demonstrated catalytic efficiency with good to excellent yields for both types of reactions in comparison with commercial palladium catalysts. Also, the catalyst could be recovered by a simple filtration and retained its activity even after several cycles.     

Synergistic Enhancement of Electrocatalytic Activity toward Oxygen Reduction Reaction in Alkaline Electrolytes with Pentabasic (Fe,B, N,S, P)‐Doped Reduced Graphene Oxide

As alternatives to Pt‐based electrocatalysts, the development of nonprecious metal catalysts with high performance in the cathodic oxygen reduction reaction (ORR) is highly desirable for widespread use in fuel cells. Here we report a simple approach for preparing pentabasic (Fe, B, N, S, P)‐doped reduced graphene oxide (rGO) via a two‐step doping method of adding boric acid and ferric chloride to ternary (N, S, P)‐doped rGO (NSPG). Electrochemical investigation of the composites for the ORR revealed that simultaneously doping appropriate amounts of Fe and B into the NSPG produced a synergistic effect that endowed the prepared catalyst with both a positively shifted ORR half‐wave potential and high selectivity for the 4e^? reduction of O₂. The optimized Fe₂B‐NSPG catalyst approached a 4e^? process for the ORR with a half‐wave potential (E_1/2=0.90 V vs. RHE) even 30 mV higher than that of the commercial Pt/C catalyst in alkaline solution. Furthermore, relative to the Pt/C catalyst, the Fe₂B‐NSPG demonstrated superior stability and excellent tolerance of the methanol cross‐over effect. This simple method afforded pentabasic (Fe, B, N, S, P)‐doped rGO as a promising nonprecious metal catalyst used for alkaline fuel cells.     

Iron‐catalyzed cross‐coupling reaction: Heterogeneous palladium and copper‐free Heck and Sonogashira cross‐coupling reactions catalyzed by a reusable Fe(III) complex

An interesting silica‐supported iron catalyst was successfully prepared and demonstrated as an efficient heterogeneous catalyst for cross‐coupling reactions of aryl halides. The as‐prepared nanocatalyst was well characterized and found to be highly efficient in Heck reaction under mild and sustainable conditions (water as solvent at 80 °C in short reaction time). Furthermore, the obtained catalyst was used as an efficient, inexpensive and green heterogeneous catalyst for Sonogashira cross‐coupling reactions of various aryl iodides and provided the corresponding products with moderate to good yields. This phosphine, copper and palladium‐free catalyst was simply recovered from the reaction mixture and recycled five times without substantial decrease in its catalytic activity.     

Impregnated palladium on magnetite, a new catalyst for the ligand-free cross-coupling Suzuki-Miyaura reaction

A new catalyst for the cross-coupling Suzuki-Miyaura reaction is reported. The impregnated palladium on magnetite catalyst is very easy to prepare using the standard impregnation methodology. This catalyst avoids the use of any type of expensive and difficult handle organic ligand, showing excellent yields, under mild reaction conditions, for the classical formation of biaryl compounds. The catalyst is very easy to remove from the reaction medium, only by using a simple magnet, and it could be re-used up to three times with only a slightly decrease of the chemical yield.     

Molybdenum Phosphosulfide: An Active,Acid‐Stable,Earth‐Abundant Catalyst for the Hydrogen Evolution Reaction

Introducing sulfur into the surface of molybdenum phosphide (MoP) produces a molybdenum phosphosulfide (MoP|S) catalyst with superb activity and stability for the hydrogen evolution reaction (HER) in acidic environments. The MoP|S catalyst reported herein exhibits one of the highest HER activities of any non‐noble‐metal electrocatalyst investigated in strong acid, while remaining perfectly stable in accelerated durability testing. Whereas mixed‐metal alloy catalysts are well‐known, MoP|S represents a more uncommon mixed‐anion catalyst where synergistic effects between sulfur and phosphorus produce a high‐surface‐area electrode that is more active than those based on either the pure sulfide or the pure phosphide. The extraordinarily high activity and stability of this catalyst open up avenues to replace platinum in technologies relevant to renewable energies, such as proton exchange membrane (PEM) electrolyzers and solar photoelectrochemical (PEC) water‐splitting cells.