α-Telluration of 2-acetylthiophene: Electronic influence of the heteroaromatic moiety on solid state structures

Room temperature oxidative addition of α-bromo-2-acetylthiophene to elemental tellurium and aryltellurium(II) bromide provides direct routes to (2-thiophenoylmethyl)tellurium(IV) dibromides, (2-(C₄H₃S)COCH₂)₂TeBr₂ (1b) and 2-(C₄H₃S)COCH₂ArTeBr₂ (Ar = 1-C₁₀H₇, Npl, 2b; 2,4,6-Me₃C₆H₂, Mes, 3b). The chloro analogues, 2-(C₄H₃S)COCH₂ArTeCl₂ (Ar = Npl, 2a; Mes, 3a) were prepared by the condensation reaction of the parent methyl ketone with NplTeCl₃ or MesTeCl₃. Metathesis of these products with an alkali iodide affords the iodo analogues 1c, 2c and 3c. These diorganotellurium dihalides are reduced with aqueous bisulfite to diorganotellurides 1-3, which can be oxidized readily with dihalogens to the desired diorganotellurium(IV) dihalides. Compound 1 is a rare example of a symmetrical telluroether with C_sp3-Te-C_sp3 grouping that has been characterized by single-crystal diffraction techniques. Preference of the 2-thiophenoylmethyl ligand for small-bite (C, O) chelation over less strained (C, S) coordination is evident in the crystal structures of the Te(IV) compounds 1b, 2a, 2b and 3a. The unexpected transoidal orientation of the two acylmethyl ligands in the solid state molecular configuration of symmetrical diorganotellurium(IV) dibromide 1b appears to be a combined effect of electronic repulsion due to the thiophene moieties and steric repulsion of bromo ligands.     

Secondary bonding in functionalized organotellurium compounds: preparation and structural characterization of bis(acetamido)tellurium(IV) diiodide and bis(4-methylbenzoylmethyl)tellurium(II)

Elemental tellurium inserts, under mild conditions, between C-I bond of iodoacetamide to afford bis(acetamido)tellurium(IV) diiodide (NH₂COCH₂)₂TeI₂, 1. Heating of N-bromomethylphthalimide with activated tellurium powder however, resulted in the formation of bis(phthalimido)methane, 2, instead of the expected product bis(phthalimidomethyl)tellurium(IV) dibromide. The IR spectrum of 1 is indicative of intramolecular Te?OC interaction which is also substantiated by its single-crystal structure. The compound with planar small-bite chelating organic ligands acquires butterfly shape that imparts almost perfect C_2v molecular symmetry but unlike other organotellurium(IV) iodides, the solid state structure of 1 is devoid of any intermolecular Te?I or I?I secondary interactions owing to the presence of intramolecular Te?O secondary bonds as well as intermolecular N-H?O, N-H?I and C-H?I hydrogen bonds. Bis(4-methylbenzoylmethyl)telluride (4-MeC₆H₄COCH₂)₂Te, 3b, prepared by the reduction of the corresponding dibromide, is the first structurally characterized acyclic dialkyltelluride and interestingly, does not involve intramolecular Te?OC interaction invariably present in the parent dihalides (4-YC₆H₄COCH₂)₂TeX₂ (Y = H, X = I 4a; Y = H, X = Br 5a; Y = MeO, X = Br 5c). Weak intermolecular Te?Te and C-H?O hydrogen bonds appear to be the non covalent intermolecular associative forces that dominate its crystal packing in the solid state of this Te(II) derivative. The dialkyltellurides (4-YC₆H₄COCH₂)₂Te, (Y = H, 3a, Me, 3b) undergo oxidation in presence of (SCN)₂ to give the corresponding bis(isothiocyanato)tellurium(IV) derivatives and form 2:1 adducts with Pt(II) and Pd(II) chlorides.     

α-Telluration of 2,4,6-trimethylacetophenone under mild conditions: Role of steric factor in the solid state structures of Te(II and IV) compounds

Elemental tellurium inserts into the C_sp3-Br bond of α-bromomesitylmethyl ketone and due to its strong carbophilic character affords the crystalline C-tellurated derivative of 2,4,6-trimethylacetophenone, (MesCOCH₂)₂TeBr₂, 1b in over 80% yield. Electrophilic substitution of the parent ketone with aryltellurium trichlorides, at room temperature, gives nearly quantitative yields of unsymmetrical alkylaryltellurium dichlorides (MesCOCH₂)ArTeCl₂ (Ar = mesityl, Mes, 2a; 1-naphthyl, Np, 3a; anisyl, Ans, 4a). Fairly stable mesitoylmethyltellurium(II) derivatives, (MesCOCH₂)₂Te, 1 and (MesCOCH₂)ArTe (Ar = Mes, 2; Np, 3 and Ans, 4) obtained as the reduction products of their dihalotellurium(IV) analogues, readily undergo oxidative addition of dihalogens to afford the corresponding (MesCOCH₂)₂TeX₂ (X = Cl, 1a; Br 1b; I, 1c) and (MesCOCH₂)ArTeX₂ (X = Cl, Br, I, Ar = Mes, 2a, 2b, 2c; Np, 3a, 3b, 3c and Ans, 4a, 4b, 4c). Crystallographic structural characterization of 1, 1b, 2, 2a, 2b, 2c, 3, 3a and 4c illustrates that the steric demand of mesityl group appreciably influences primary geometry around the 5-coordinate Te(IV) atom when it is bound directly to it. It also makes the Te atom inaccessible for the ubiquitous Te?X intermolecular secondary bonding interactions that result in supramolecular structures. In the crystal lattice of symmetrical telluroether 1, an interesting supramolecular synthon based upon reciprocatory weak C-H?O H-bonding interaction gives rise to chains via self-assembly.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

The interplay of secondary Te?N, Te?O, Te?I and I?I interactions, Te?π contacts and π-stacking in the supramolecular structures of [{2-(4-nitrobenzylideneamino)-5-methyl}phenyl](4-methoxyphenyl)tellurium dihalides

The unsymmetrically substituted diorganotellurium dihalides [2-(4,4′-NO₂C₆H₄CHNC₆H₃Me]RTeX₂ (R = 4-MeOC₆H₄, X = Cl, 1a; Br, 1b; I, 1c; R = 4-MeC₆H₄; X = Cl, 2; R = C₆H₅, X = Cl, 3) were prepared in good yields and characterized by solution and solid-state ¹²⁵Te NMR spectroscopy, IR spectroscopy and X-ray crystallography. In the solid-state, molecular structures of 1a and 1c possess scarcely observed 1,4-type intramolecular Te?N secondary interaction. Crystal packing of these compounds show an unusually rich diversity of intermolecular secondary, Te?O, Te?I and I?I interactions, Te?π contacts as well as extensive π-stacking of the organic substituents.     

C(sp)H?O and C(sp)H?O hydrogen bonds in acyclic- and cyclic-organotellurium carboxylates

The reactions between R₂TeI₂ (R₂=(CH₃)₂, C₄H₈, C₅H₁₀) and AgOCOR′ (R′=C₆H₅, 4-NO₂C₆H₄, CHCHC₆H₅) (molar ratio 1:2) yield diorganotellurium dicarboxylates: (CH₃)₂Te(OCOC₆H₅)₂ (1), C₅H₁₀ Te(OCOC₆H₅)₂ (2), C₄H₈Te(OCO4-NO₂C₆H₄)₂ (3) and C₄H₈Te(OCOCHCHC₆H₅)₂ (4). They are characterized by IR, (¹H, ¹³C, ¹²⁵Te) solution NMR; (¹³C, ¹²⁵Te) solid state NMR spectroscopy. The X-ray structures of 1-4 (the immediate environment about tellurium is that of distorted trigonal bipyramidal geometry with a stereochemically active electron lone pair) are described in the context of their ability to generate intermolecular CH?O hydrogen bonds, which lead to the formation of supramolecular assemblies.     

Synthesis and characterization of half-sandwich Rh, Ir complexes containing mono-thiolate-ortho-carborane ligand

Two binuclear complexes [Cp^∗M(Cl)Carb^S]₂ (Cp^∗ = η⁵-C₅Me₅, M = Rh (1a), Carb^S = SC₂(H)B₁₀H₁₀, Ir (1b)) were synthesized by the reaction of LiCarb^S with the dimeric metal complexes [Cp^∗MCl(μ-Cl)]₂ (M = Rh, Ir). Four mononuclear complexes Cp^∗M(Cl)(L)Carb^S (L = BuⁿPPh₂, M = Rh (2a), Ir (2b); L = PPh₃, M = Rh (4a), Ir (4b)) were synthesized by reactions of 1a or 1b with L (L = BuⁿPPh₂ (2); PPh₃ (4)) in moderate yields, respectively. Complexes 3a, 3b, 5a, 5b were obtained by treatment of 2a, 2b, 4a, 4b with AgPF₆ in high yields, respectively. All of these compounds were fully characterized by IR, NMR, and elemental analysis, and the crystal structures of 1a, 1b, 2a, 2b, 4a, 4b were also confirmed by X-ray crystallography. Their structures showed 3a, 3b and 5a, 5b could be expected as good candidates for heterolytic dihydrogen activation. Preliminary experiments on the dihydrogen activation driven by these half-sandwich Rh, Ir complexes were done under mild conditions.     

Synthesis, spectral and structural characterisation of ditelluroxanes: μ-oxo-bis[nitrato-; 2,4,6-trinitrophenolato-dialkyl tellurium (IV)]

The synthesis of ditelluroxanes: μ-oxo-bis[nitrato dimethyl tellurium (IV)] [(CH₃)₂TeNO₃]₂O (1), μ-oxo-bis[(2,4,6-trinitro)phenolato dimethyl tellurium (IV)] [(CH₃)₂TeOC₆H₂(NO₂)₃]₂O (2) and μ-oxo-bis[1-(2,4,6-trinitro)phenolato-1,1,2,3,4,5-hexahydrotellurophene] [C₄H₈TeOC₆H₂(NO₂)₃]₂O (3) was achieved. 1 was synthesised by the reaction of (CH₃)₂TeI₂ with fuming HNO₃ while 2 and 3 were synthesised by the reactions of R₂Te(OH)₂ [R₂ = (CH₃)₂, (C₄H₈)] (in situ) with 2,4,6-trinitrophenol [ 2,4,6-(NO₂)₃C₆H₂OH] (picric acid). 1-3 have been investigated through UV/Vis; FT-IR, (¹H, ¹³C) NMR spectroscopy and single crystal X-ray diffraction studies. In 1-3 the immediate coordination geometry about the central tellurium atom can be described as pseudo trigonal bipyramidal and the stereochemically active electron lone pair occupying equatorial position. The supramolecular self-organisations of these tetraorgano ditelluroxanes (1-3) are explained through cooperative participation of Te?O secondary bonds, C-H?O hydrogen bonds and π-stacking of the organic substituents.     

Synthesis and characterization of aluminum and zinc complexes supported by pyrrole-based ligands and catalysis of the aluminum complexes toward the ring-opening polymerization of ?-caprolactone

Reaction of quinolin-8-amine with 1H-pyrrole-2-carbaldehyde or 5-tert-butyl-1H-pyrrole-2-carbaldehyde catalyzed by HCO₂H forms N-((1H-pyrrol-2-yl)methylene)quinolin-8-amine (≡ HL, 3a) or N-((5-tert-butyl-1H-pyrrol-2-yl)methylene)quinolin-8-amine (≡ HL′, 3b). Treatment of 3a and 3b respectively with AlMe₃ or AlEt₃ in toluene affords corresponding aluminum complexes LAlMe₂ (4a), L′AlMe₂ (4b) and LAlEt₂ (4c). Reaction of 3a and 3b with an equivalent of ZnEt₂ in toluene generates L₂Zn and L′₂Zn, respectively. A related compound N-((1H-pyrrol-2-yl)methylene)-2-(3,5-dimethyl-1H-pyrazol-1-yl)benzenamine (≡ HL″, 7) was prepared by reaction of 2-(3,5-dimethyl-1H-pyrazol-1-yl)benzenamine with 1H-pyrrole-2-carbaldehyde in the presence of HCO₂H. Reaction of 7 with AlMe₃ gives L″₂AlMe (8), and with ZnEt₂ yields L″₂Zn (9). All new compounds were characterized by NMR spectroscopy and elemental analysis. The structures of complexes 4b, 5b and 8 were additionally characterized by single crystal X-ray diffraction analyses. Complexes 4a-4c, and 8 were proved to be active catalysts for the ring-opening polymerization (ROP) of ?-caprolactone (?-CL) in the presence of BnOH. The kinetic study of the polymerization reactions catalyzed by 4a and 8 was performed.     

Coordinating properties of [M(CO)5(CN)] [M=Cr; Mo; W] ligands: formation of ion pairs or dinuclear cyanide-bridged complexes, spectroscopic and X-ray diffraction studies

The reaction of sodium cyanopentacarbonylmetalates Na[M(CO)₅(CN)] (M=Cr; Mo; W) with cationic Fe(II) complexes [Cp(CO)(L)Fe(thf)][O₃SCF₃], [L=PPh₃ (1a), CN-Benzyl (1b), CN-2,6-Me₂C₆H₃ (1c); CN-Bu^t (1d), P(OMe)₃ (1e), P(Me)₂Ph (1f)] in acetonitrile solution, yielded the metathesis products [Cp(CO)(L)Fe(NCCH₃)][NCM(CO)₅] [M=W, L=PPh₃ (2a), CN-Benzyl (2b), CN-2,6-Me₂C₆H₃ (2c); CN-Bu^t (2d), P(OMe)₃ (2e), P(Me)₂Ph (2f); M=Cr, L=(PPh₃) (3a), CN-2,6-Me₂C₆H₃ (3c); M=Mo, L=(PPh₃) (4a), CN-2,6-Me₂C₆H₃ (4c)]. The ionic nature of such complexes was suggested by conductivity measurements and their main structural features were determined by X-ray diffraction studies. Well-resolved signals relative to the [M(CO)₅(CN)] moieties could be distinguished only when ¹³C NMR experiments were performed at low temperature (from −30 to −50 °C), as in the case of [Cp(CO)(PPh₃)Fe(NCCH₃)][NCW(CO)₅] (2a) and [Cp(CO)(Benzyl-NC)Fe(NCCH₃)][NCW(CO)₅] (2b). When the same reaction was carried out in dichloromethane solution, neutral cyanide-bridged dinuclear complexes [Cp(CO)(L)FeNCM(CO)₅] [M=W, L=PPh₃ (5a), CN-Benzyl (5b); M=Cr, L=(PPh₃) (6a), CN-2,6-Me₂C₆H₃ (6c), CO (6g); M=Mo, L=CN-2,6-Me₂C₆H₃ (7c), CO (7g)] were obtained and characterized by infrared and NMR spectroscopy. In all cases, the room temperature ¹³C NMR measurements showed no broadening of cyano pentacarbonyl signals and, relative to tungsten complexes [Cp(CO)(PPh₃)FeNCW(CO)₅] (5a) and [Cp(CO)(CN-Benzyl)FeNCW(CO)₅] (5b), the presence of ¹⁸³W satellites of the ¹³CN resonances (J_CW ∼ 95 Hz) at room temperature confirmed the formation of stable neutral species. The main ¹³C NMR spectroscopic properties of the latter compounds were compared to those of the linkage isomers [Cp(CO)(PPh₃)FeCNW(CO)₅] (8a) and [Cp(CO)(CN-Benzyl)FeCNW(CO)₅] (8b). The characterization of the isomeric couples 5a-8a and 5b-8b was completed by the analyses of their main IR spectroscopic properties. The crystal structures determined for 2a, 5a, 8a and 8b allowed to investigate the geometrical and electronic differences between such complexes. Finally, the study was completed by extended Hückel calculations of the charge distribution among the relevant atoms for complexes 2a, 5a and 8a.     

Synthesis and spectroscopic characterization of eleven mixed-ligand diorganotellurium(IV) compounds containing dithiocarbamate and dithiophosphate ligands

Eleven mixed-ligand organotellurium(IV) compounds of composition R₂Te(dtc)(dtp) have been prepared employing two different dithiocarbamate (dtc) and dithiophosphate (dtp) ligands: 1, R₂ = C₄H₈, dtc = S₂CNEt₂, dtp = S₂P(OCH₂)₂CEt₂; 2, R₂ = C₈H₈, dtc = S₂CNEt₂, dtp = S₂P(OCH₂)₂CEt₂; 3, R₂ = C₄H₈O, dtc = S₂CNEt₂, dtp = S₂P(OCH₂)₂CEt₂; 4, R₂ = C₅H₁₀, dtc = S₂CNEt₂, dtp = S₂P(OCH₂)₂CEt₂; 5, R₂ = C₄H₈, dtc = S₂CN(CH₂)₄, dtp = S₂P(OCH₂)₂CEt₂; 6, R₂ = C₈H₈, dtc = S₂CN(CH₂)₄, dtp = S₂P(OCH₂)₂CEt₂; 7, R₂ = C₄H₈O, dtc = S₂CN(CH₂)₄, dtp = S₂P(OCH₂)₂CEt₂; 8, R₂ = C₅H₁₀, dtc = S₂CN(CH₂)₄, dtp = S₂P(OCH₂)₂CEt₂; 9, R₂ = C₄H₈, dtc = S₂CN(CH₂)₄, dtp = S₂P(OCH₂)₂CMeⁿPr; 10, R₂ = C₈H₈, dtc = S₂CN(CH₂)₄, dtp = S₂P(OCH₂)₂CMeⁿPr; 11, R₂ = C₄H₈O, dtc = S₂CN(CH₂)₄, dtp = S₂P(OCH₂)₂CMeⁿPr. 1-11 were characterized by mass spectrometry, IR spectroscopy and multinuclear NMR (¹H, ¹³C, ³¹P, ¹²⁵Te) spectroscopy. The molecular structures of 2, 4 and 6, of which 2 crystallized in form of two different polymorphs (2a and 2b), were analyzed by single-crystal X-ray diffraction analysis. This analysis showed that the coordination mode of both ligand types is anisobidentate. When considering only covalent Te-C and Te-S bonds, the coordination geometry of the tellurium atoms is distorted Ψ-trigonal-bipyramidal, since the lone pair is stereochemically active and occupies an equatorial position together with the carbon atoms of the tellurocycles. If secondary Te?S interactions are considered also, the coordination sphere around tellurium is best described as bicapped Ψ-trigonal-bipyramidal for the complexes with two intramolecular Te?S secondary bonds and monomeric molecular structures, and pentagonal-bipyramidal for the complexes in which neighboring molecules in the crystal lattice are linked through additional weak intermolecular Te?S secondary bonds to form dimeric supramolecular aggregates.     

Synthesis and properties of 4,9-methanoundecafulvenes and their transformation to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones: photo-induced autorecycling oxidizing reaction toward amines

The synthesis and properties of 4,9-methanoundecafulvene [5-(4,9-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-trione] derivatives 8a,b were studied. Their structural characteristics were investigated on the basis of the ¹H and ¹³C NMR and UV-vis spectra. The rotational barrier (ΔG^‡) around the exocyclic double bond of 8a was found to be 12.55 kcal mol⁻¹ by the variable temperature ¹H NMR measurement. The electrochemical properties of 8a,b were also studied by CV measurement. Furthermore, the transformation of 8a,b to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones 16a,b was accomplished by oxidative cyclization using DDQ and subsequent ring-opening and ring-closure. The structural details and chemical properties of 16a,b were clarified. Reaction of 16a with deuteride afforded C13-adduct 19 as the single product, and thus, the methano-bridge controls the nucleophilic attack to prefer endo-selectivity. The photo-induced oxidation reaction of 16a and a vinylogous compound, 3-methylcyclohepta[4,5]furo[2,3-d]pyrimidine-2,4(3H)-dione 2a, toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) with the recycling number of 6.1-64.0 (for 16a) and 2.7-17.2 (for 2a), respectively.     

The structural diversity of Te-I interactions within tetraorganoditelluroxane diiodides and related compounds

Two tetraorganoditelluroxane diiodides (R₂Te)₂OI₂ (3, R = p-MeOC₆H₄; 5, R = Me) were prepared by the reaction of (p-MeOC₆H₄)₂TeI₂ (1) and (p-MeOC₆H₄)₂TeO (2) and the base hydrolysis of Me₂TeI₂ (4), respectively. The base hydrolysis of C₄H₈TeI₂ (8) afforded the tritelluroxane diiodide (C₄H₈Te)₃O₂I₂ (9). The reaction of Me₂TeI₂ (4) and Me₂Te(OH)₂ (6) in a ratio of 1:3 produced the coordination polymer of the composition 2 (Me₂Te)₂O(I)OH · H₂O (7). An attempt at preparing an adduct of 3 with iodine failed but provided co-crystals of (p-MeOC₆H₄)₂TeI₂ · I₂ (1a). The supramolecular structures of 1a, 3, 5, 7 and 9 are dominated by structurally directing secondary Te?I interactions.     

Organosilicon chalcogenides with trisilane units - bicyclo[3.3.1]nonanes, bicyclo[3.2.2]nonanes and spiro[4.4]nonanes

Treatment of 1,2,3-trichloropentamethyltrisilane (1) with H₂S/NEt₃ results in the formation of a mixture of two isomers of (Me₅Si₃)₂S₃ with a bicyclo[3.3.1]nonane (2a) and a bicyclo[3.2.2]nonane (2b) skeleton, while the reaction of 1 with Li₂Se yields one product only, (Me₅Si₃)₂Se₃ (3a), with a bicyclo[3.3.1]nonane structure. Besides ¹H, ¹³C, ²⁹Si and ⁷⁷Se NMR spectroscopy 3a has also been characterized by a crystal structure analysis.Compounds Si(SiMe₂EMR₂E)₂ (5a-h: MR₂: SiMe₂ (5a, c, d), SiPh₂ (5b), GeMe₂ (5e, f), SnMe₂ (5g, h); E=S (5a, b, e, g), Se (5c, f, h), Te (5d)) with a spiro[4.4]nonane skeleton have been obtained in mixture with varying amounts of the corresponding six-membered rings (R₂ME)₃ by reactions of mixtures of 1,2,2,3-tetrachlorotetramethyltrisilane (4) and diorganodichlorosilanes, Me₂GeCl₂ or Me₂SnCl₂, with H₂S/NEt₃, Li₂Se or Li₂Te and have been characterized in situ by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ¹¹⁹Sn, ⁷⁷Se, ¹²⁵Te) and GC-MS.     

Reactivity of 1-boraadamantanes towards bis(trialkylstannyl)ethynes. First examples of 3-boratricyclo[5.3.1.1]dodecanes, and the molecular structure of a tetraalkyldiboroxane

1-Boraadamantane (1) and 2-ethyl-1-boraadamantane (1(2-Et)) react with bis(trialkylstannyl)ethynes (3), R₃Sn-CC-SnR₃ with R=Me (a), Et (b), in a 1:1 molar ratio by 1,1-organoboration under very mild conditions to give the 4-methylene-3-borahomoadamantane derivatives 4a,b and 7a,b, respectively, which are dynamic at room temperature with respect to deorganoboration. The compounds 4a,b react further with 3a,b by 1,1-organoboration to the tricyclic butadiene derivatives 5a,b. Attempts to crystallise 4a afforded the product of hydrolysis, the diboroxane 6a which was characterised by X-ray structural analysis. All products were characterised in solution by ¹H-, ¹¹B-, ¹³C- and ¹¹⁹Sn-NMR spectroscopy.     

Synthesis and reactivity of new functionalized Pd(II) cyclometallated complexes with boronic esters

Treatment of the functionalized Schiff base ligands with boronic esters 1a, 1b, 1c and 1d with palladium (II) acetate in toluene gave the polynuclear cyclometallated complexes 2a, 2b, 2c and 2d, respectively, as air-stable solids, with the ligand as a terdentate [C,N,O] moiety after deprotonation of the -OH group. Reaction of 1j with palladium (II) acetate in toluene gave the dinuclear cyclometallated complex 5j. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species 3a, 3b, 3c, 3d and 6j with cleavage of the polynuclear structure. Treatment of 2c with the diphosphine Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) in 1:2 molar ratio gave the dinuclear cyclometallated complex 4c as an air-stable solid.Deprotection of the boronic ester can be easily achieved; thus, by stirring the cyclometallated complex 3a in a mixture of acetone/water, 3e is obtained in good yield. Reaction of the tetrameric complex 2a with cis-1,2-cyclopentanediol in chloroform gave complex 2c after a transesterification reaction. Under similar conditions complexes 3a and 3d behaved similarly: with cis-1,2-cyclopentanediol, pinacol or diethanolamine complexes 3c, 3b, 3g and 3f, were obtained. The pinacol derivatives 3b and 3g experiment the Petasis reaction with glyoxylic acid and morpholine in dichloromethane to give complexes 3h, and 3i, respectively.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

Synthesis and structure of mono- and di-nuclear complexes of ortho-palladated derived from phosphorus ylides

The phosphorus ylides Ph₃PCHC(O)C₆H₄R (R = 4-Me 1a, 4-Br 1b) react with PdCl₂ in equimolar ratios to give the C,C-orthopalladated [Pd{CHP(C₆H₄)Ph₂CO-C₆H₄-R)}(μ-Cl)]₂ (R = 4-Me 2a, 4-Br 2b) which react with NaClO₄/dppe, NaClO₄/dppm, py and PPh₃ to give the mononuclear derivatives [Pd{CH{P(C₆H₄)Ph₂}COC₆H₄-R}(dppe-P,P′)[(ClO₄) (R = 4-Me 3a, 4-Br 3b), [Pd{CH{P(C₆H₄)Ph₂}COC₆H₄-R}(dppm-P,P′)[(ClO₄ ( (R = 4-Me 4a, 4-Br 4b), [Pd{CH{P(C₆H₄)Ph₂}COC₆H₄-R}Cl(L)] (L = py, R = 4-Me 5a, 4-Br 5b, L = PPh₃, R = 4-Me 6a, 4-Br 6b). The C, C-metalated chelate are demonstrated by an X-ray diffraction study of 3a and 4a. Characterization of the obtained compounds was also performed by elemental analysis, IR, ¹H, ³¹P, and ¹³C NMR.     

Di- and tri-nuclear molybdenum-palladium complexes bearing strong π-acceptor “P-N-P” ligands, MeN{P(OR)2}2 (R = CH2CF3 or Ph)

The dipalladium complexes, [PdCl(μ-MeN{P(OR)₂}₂)]₂ (R = CH₂CF₃, 1a; Ph, 1b) react with [Mo₂(η⁵-C₅H₅)₂(CO)₆] in boiling benzene to afford the molybdenum-palladium heterometallic complexes, [(η⁵-C₅H₅)(CO)Mo(μ-MeN{P(OR)₂}₂)₂PdCl] (R = CH₂CF₃, 3a; Ph, 3b), [(η⁵-C₅H₅)Mo(μ₃-CO)₂(μ-MeN{P(OR)₂}₂)₂Pd₂Cl], (R = CH₂CF₃, 5a; Ph, 5b), [(η⁵-C₅H₅)(Cl)Mo(μ₂-CO)(μ₂-Cl)(μ-MeN{P(OR)₂}₂)PdCl], (R = CH₂CF₃, 6a; Ph, 6b) and also the mononuclear complex [Mo(CO)Cl(η⁵-C₅H₅)(κ²-MeN{P(OR)₂}₂)], (R = Ph, 4b). These complexes have been separated by column chromatography and are characterised by elemental analysis, IR, ¹H, ³¹P{¹H} NMR data. The structures of 1a, 3a, 4b, 5b and 6a have been confirmed by single crystal X-ray diffraction. The CO ligands in 5b and 6a adopt a semi-bridging mode of bonding; the Mo-CO distances (1.95-1.97 Å) are shorter than the Pd-CO distances (2.40-2.48 Å). The Pd-Mo distances fall in the range, 2.63-2.86 Å. The reaction of [Mo₂(η⁵-C₅H₅)₂(CO)₆] with MeN{P(OPh)₂}₂ in toluene gives [Mo₂(CO)₄(η⁵-C₅H₅)₂(κ¹-MeN{P(OPh)₂}₂)₂] (2) in which the diphosphazane acts as a monodentate ligand.