Reactivity of a functionalized trisamido ligand with Zr(NMe2)4 and GaMe3

NMR study of the reactivity of multifunctional ligand cis,cis-C₆H₉(NHCH₂C₆H₄-o-PPh₂)₃ (1) with GaMe₃ and Zr(NMe₂)₄ was carried out, yielding [cis,cis-(κ^N-NHCH₂C₆H₄-o-PPh₂)(κ^N-NCH₂C₆H₄-o-PPh₂)₂C₆H₉]GaMe (2) and [cis,cis-(NCH₂C₆H₄-o-PPh₂)₃C₆H₉]Ga₂Me₃ (3), and [cis,cis-(NCH₂C₆H₄-o-PPh₂)₃C₆H₉]Zr(NMe₂) (4), respectively. The spectral properties of 2 and 3 are very similar to that observed for the equivalent aluminum species already reported, but form at a much slower rate which allows for the observation of a GaMe₃⋅1 adduct. Species 4 undergoes coordination/displacement of one of the phosphine arms, which was observed using both NMR spectroscopy and DFT analyses.     

Cp2Ti{[OC(O)C5H4]Cr(CO)2NO]}2 and Cp2Ti{[(OC(O)C5H4]Cr(NO)2X}2 syntheses and spectra of chromium-titanium complexes bridged by carboxylate substituted cyclopentadienyl group

Complete demethylation of Cp₂Ti(CH₃)₂ in dichloromethane with 2 M equivalent of [η⁵-(C₅H₄COOH)]Cr(CO)₂NO (5), [η⁵-(C₅H₄COOH)]Cr(NO)₂X] (X = Cl 6, X = I 7), and [η⁵-(C₅H₄COOH)]W(CO)₃CH₃ (8); gives Cp₂Ti{[OC(O)C₅H₄]Cr(CO)₂NO}₂ (13), Cp₂Ti{[OC(O)C₅H₄]Cr(NO)₂Cl}₂ (14), Cp₂Ti{[OC(O)C₅H₄]Cr(NO)₂I}₂ (15),and Cp₂Ti{[OC(O)C₅H₄]W(CO)₃CH₃}₂ (16), respectively. The chemical shifts of C(2)-C(5) carbon atoms of compounds 13-15 have been assigned using two-dimensional HetCOR NMR spectroscopy. The assigned chemical shifts were compared with the NMR data of their analogues of ferrocene, and the opposite correlation on the assignments was observed for cynichrodenoyl moieties.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

X-ray crystal structures and solution dynamics of sodium organofluorotitanates [Na{Ti2(C5Me5)2F7}] and [NaTi6(C5Me5)5F20(H2O)]·(THF)

[Na{Ti₂(C₅Me₅)₂F₇}] (1) was prepared from sodium fluoride and [{Ti(C₅Me₅)F₃}₂] [H.W. Roesky, et al., Angew. Chem. Int. Ed. Engl. 31 (1992) 864-866]. The solid-state 1 consists of a polymeric chain of two rows of dititanate anions [Ti₂(C₅Me₅)₂F₇]⁻ connected by sodium ions in the middle of the chain. Each sodium ion is coordinated by five fluorine atoms from three [Ti₂(C₅Me₅)₂F₇]⁻ anions. The variable-temperature ¹⁹F NMR of CD₃CN solution of 1 revealed interconversions of monomeric species [Na(CD₃CN)_n{Ti₂(C₅Me₅)₂F₇}] (1solv) with different number of CD₃CN ligands on the sodium ion. The addition of HMPA to the CD₃CN solution of 1 allows ¹⁹F NMR observation of 1·HMPA (1a) and 1·HMPA·CD₃CN (1b) in the slow exchange. The solid-state structure of [NaTi₆(C₅Me₅)₅F₂₀(H₂O)]·(THF) (2·THF) reveals the sodium ion coordinated by four fluorine atoms from the anion [Ti₂(C₅Me₅)₂F₇]⁻ and by three fluorine atoms from the cluster [Ti₄(C₅Me₅)₃F₁₃(H₂O)].     

Organoselenium(II) and selenium(IV) compounds containing 2-(Me2NCH2)C6H4 moieties: solution behavior and solid state structure

The cleavage of the Se-Se bond in [2-(Me₂NCH₂)C₆H₄]₂Se₂ (1) was achieved by treatment with SO₂Cl₂ (1:1 molar ratio) or elemental halogens to yield [2-(Me₂NCH₂)C₆H₄]SeX [X = Cl (2), Br (3), I (4)]. Oxidation of 1 with SO₂Cl₂ (1:3 molar ratio) gave [2-(Me₂NCH₂)C₆H₄]SeCl₃ (5). [2-(Me₂NCH₂)C₆H₄]SeS(S)CNR₂ [R = Me (6), Et (7)] were prepared by reacting [2-(Me₂NCH₂)C₆H₄]SeBr with Na[S₂CNR₂] · nH₂O (R = Me, n = 2; R = Et, n = 3). The reaction of 3 with K[(SPMe₂)(SPPh₂)N] resulted in isolation of [2-(Me₂NCH₂)C₆H₄]Se-S-PMe₂N-PPh₂S (8). The compounds were characterized by solution NMR spectroscopy (¹H, ¹³C, ³¹P, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 4-8 were established by single crystal X-ray diffraction. All compounds are monomeric, with the N atom of the pendant CH₂NMe₂ arm involved in a three-center-four-electron N?Se-X (X = halogen, S) bond. This results in a T-shaped coordination geometry for the Se(II) atom in 2, 4, 6-8. In 5, the Se(IV) atom achieves a square pyramidal coordination in the mononuclear unit. Loosely connected dimers are formed through intermolecular Se?Cl interactions (3.40 Å); the overall coordination geometry being distorted octahedral. In all compounds hydrogen bonds involving halide or sulfur atoms generate supramolecular associations in crystals.     

Electrochemical, EPR and computational results on [Fe2Cp2(CO)2]-based complexes with a bridging hydrocarbyl ligand

The dimetallacyclopentenone complexes [Fe₂Cp₂(CO)(μ−CO){μ−η¹:η³−C_αHC_β(R)C(O)}] (R = CH₂OH, 1a; R = CMe₂OH, 1b; R = Ph, 1c) were prepared by photolytic reaction of [Fe₂Cp₂(CO)₄] with alkyne according to the literature procedure. The X-ray and the electrochemical characterization of 1c are presented. The μ-allenyl compound [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β−C_αHC_βCMe₂][BF₄] ([2][BF₄]), obtained by reaction of 1b with HBF₄, underwent monoelectron reduction to give a radical species which was detected by EPR at room temperature. The EPR signal has been assigned to [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²_α,β-C_αHC_βCMe₂}], [2]^•. The molecular structures of [2]⁺ and [2]^• were optimized by DFT calculations. The unpaired electron in [2]^• is localized mainly at the metal centers and, coherently, [2]^• does not undergo carbon-carbon dimerization, by contrast with what previously observed for the μ-vinyl radical complex [Fe₂Cp₂(CO)₂(μ−CO){μ−η¹:η²-CHCH(Ph)}]^•, [3]^•. Electron spin density distributions similar to the one of [2]^• were found for the μ-allenyl radical complexes [Fe₂Cp₂(CO)₂(μ-CO){μ-η¹:η²_α,β-C_αHC_βC(R¹)(R²)}]^• (R¹ = R² = H, [4]^•; R¹ = H, R² = Ph, [5]^•; R¹ = R² = Ph, [6]^•).     

Syntheses of platinum(II) complexes of cyclo-octenyl group and isolation of a self-assembled oxo-bridged macrocyclic complex [Pt4(Spy)4(C8H12-O-C8H12)2]

Reactions of [Pt₂(μ-Cl)₂(C₈H₁₂OMe)₂] (1) (C₈H₁₂OMe = 8-methoxy-cyclooct-4-ene-1-yl) with various anionic chalcogenolate ligands have been investigated. The reaction of 1 with Pb(Spy)₂ (HSpy = pyridine-2-thiol) yielded a binuclear complex [Pt₂(Spy)₂(C₈H₁₂OMe)₂] (2). A trinuclear complex [Pt₃(Spy)₄(C₈H₁₂OMe)₂] (3) was isolated by a reaction between 2 and [Pt(Spy)₂]_n. The reaction of 1 with HSpy in the presence of NaOMe generated 2 and its demethylated oxo-bridged tetranuclear complex [Pt₄(Spy)₄(C₈H₁₂-O-C₈H₁₂)₂] (4). Treatment of 1 with ammonium diisopropyldithiophosphate completely replaced C₈H₁₂OMe resulting in [Pt(S₂P{OPrⁱ}₂)₂] (5), whereas non-rigid 5-membered chelating ligand, Me₂NCH₂CH₂E⁻, produced mononuclear complexes [Pt(ECH₂CH₂NMe₂)(C₈H₁₂OMe)] (E = S (6), Se (7)). These complexes have been characterized by elemental analyses, NMR (¹H, ¹³C{¹H}, ¹⁹⁵Pt{¹H}) and absorption spectroscopy. Molecular structures of 2, 3, 4, 5 and 7 were established by single crystal X-ray diffraction analyses. Thermolysis of 2, 6 and 7 in HDA gave platinum nanoparticles.     

New organomercury(II) compounds containing intramolecular N → Hg interactions: crystal and molecular structure of [2-(Me2NCH2)C6H4]HgCl and [2-(Me2NCH2)C6H4]Hg[S(S)PPh2]

[2-(Me₂NCH₂)C₆H₄]HgCl (1) was prepared by reacting HgCl₂ with [2-(Me₂NCH₂)C₆H₄]Li in diethyl ether. The reactions of 1 with the sodium or ammonium salt of the appropriate thiophosphinato ligand, in 1:1 molar ratio, afford the isolation of [2-(Me₂NCH₂)C₆H₄]Hg[S(S)PR₂] [R=Me (2), Et (3), Ph (4)], [2-(Me₂NCH₂)C₆H₄]Hg[S(O)PPh₂] (5) and [2-(Me₂NCH₂)C₆H₄]Hg[S(S)P(OⁱPr)₂] (6). The compounds were investigated by IR and multinuclear NMR (¹H, ¹³C and ³¹P) spectroscopy. The molecular structures of 1 and 4 were determined by single-crystal X-ray diffraction. Due to the strong intramolecular coordination of the N atom of the pendant CH₂NMe₂ arm [Hg(1)-N(1) 2.764(6) and 2.725(4) Å in 1 and 4, respectively] both compounds exhibit a T-shaped (C,N)HgX core in the molecular unit, with almost linear arrangement of the covalent bonds [C(1)-Hg(1)-Cl(1) 176.93(18)° in 1, and C(1)-Hg(1)-S(1) 169.54(16)° in 4]. The crystals of 1 contain discrete monomeric molecules, while the crystals of 4 contain dimer associations built through asymmetric bridging dithiophosphinato ligands [Hg(1)-S(1) 2.3911(16) Å, Hg(1)?S(2a) 3.102(2) Å], thus resulting in an overall pseudo-trigonal bipyramidal (or seesaw) (C,N)HgS₂ core, with the nitrogen atom and the weekly bonded sulfur atom in equatorial positions [N(1)-Hg(1)?S(2a) 82.01(10)°].     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.     

Syntheses and spectra of chromium-titanium complexes bridged by carboxylate substituted cyclopentadienyl group: The structure of Cp2Ti(CH3){[OC(O)C5H4]Cr(NO)2Cl}

Mono-demethylation of Cp₂Ti(CH₃)₂ in dichloromethane with 1 M equivalent of [η⁵-(C₅H₄COOH)]Cr(CO)₂NO (5), [η⁵-(C₅H₄COOH)]Cr(NO)₂X] (X = Cl 6, X = I 7) and [η⁵-(C₅H₄COOH)]W(CO)₃CH₃ (8) gives Cp₂Ti(CH₃){[OC(O)C₅H₄]Cr(CO)₂NO} (9), Cp₂Ti(CH₃){[OC(O)C₅H₄]Cr(NO)₂Cl} (10), Cp₂Ti(CH₃){[OC(O)C₅H₄]Cr(NO)₂I} (11) and Cp₂Ti(CH₃){[OC(O)C₅H₄]W(CO)₃CH₃} (12), respectively. The structure of 10 has been solved by X-ray diffraction studies. One of the nitrosyl groups is located at the site away from the exocyclic carbonyl carbon of the Cp(Cr) ring with twist angle of 178.1°. All the data reveals that Cp₂Ti(CH₃)- is a strong electron-donating group. The opposite correlation was observed on the chemical shift assignments of C(2)-C(5) in compounds 5-12, using HetCOR NMR spectroscopy, as compared with the NMR data of their ferrocene analogues. The electron density distribution in the cyclopentadienyl ring is discussed on the basis of ¹³C NMR data and those of 10 are compared with the calculations via density functional B3LYP correlation- exchange method.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Reactions of bis(alkynyl)silanes with HB(C6F5)2: Formation of boryl-substituted silacyclobutene derivatives

Treatment of R₂Si(CC-SiMe₃)₂ [1a (Me), 1b (Ph)] with HB(C₆F₅)₂ at low temperature (253 K (a), 273 K (b)) gives the -B(C₆F₅)₂ substituted silacyclobutene products (4a,b) under kinetic control. Upon warming to room temperature they disappear to form the thermodynamically favoured isomeric silole derivatives (2a,b). Similar treatment of Me₂Si(CC-R¹)₂ [5a (R¹ = Ph), 5b (R¹ = tert-butyl) with HB(C₆F₅)₂ at room temperature gave the stable -B(C₆F₅)₂ substituted silacyclobutene derivatives 6 and 7, respectively. Subsequent photolysis resulted in a Z- to E-isomerization of the substituted exocyclic CC double bonds in these products. The silacyclobutene derivative E-6 was characterized by an X-ray crystal structure analysis.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

On the reactivity of [IrCl(N2)(PPh3)2] with alkynylsilanes - A new route to vinylidene iridium(I) complexes

The iridium dinitrogen complex [IrCl(N₂)(PPh₃)₂] (1) was found to react with alkynylsilanes to form the vinylidene iridium(I) complexes trans- (R/R′ = Ph/Me, 2; Me/Me, 3; Bn/Me, 4; SiMe₃/Me, 5; SiEt₃/Et, 6; ⁱPr/Me, 7) and with Me₃SiCCC(O)R to yield the iridium η²-alkyne complexes trans-[IrCl{η²-Me₃SiCCC(O)R}(PPh₃)₂] (R = OEt, 9; Me, 11). Complex 9 was found to isomerize upon heating or upon UV irradiation yielding the vinylidene complex trans-[IrCl{CC(SiMe₃)CO₂Et}(PPh₃)₂] (10). The reaction of 1 with Me₃SiCCCCSiMe₃ yielded the complex trans-[IrCl{CC(SiMe₃)CCSiMe₃}(PPh₃)₂] (8), whereas with MeO₂CCCCO₂Me the iridacyclopentadiene complex [Ir{C₄(CO₂Me)₄}Cl(PPh₃)₂] (13) was formed. The complexes were characterized by means of ¹H, ¹³C and ³¹P NMR spectroscopy as well as by IR spectroscopy and microanalysis.     

Unexpected product formed by the reaction of [2,6-(MeOCH2)2C6H3]Li with SbCl3: Structure of Sb-O intramolecularly coordinated organoantimony cation

Reaction of [2,6-(MeOCH₂)₂C₆H₃]Li (1) with SbCl₃ in 1:1 molar ratio yielded except the intended product [2,6-(MeOCH₂)₂C₆H₃]SbCl₂ (2) unexpected complex 3 consisting of antimony anion [Sb₆Cl₂₂]⁴⁻ compensated by four intramolecularly coordinated organoantimony cations [2,6-(MeOCH₂)₂C₆H₃]₂Sb⁺. Compound 3 is labile in CH₂Cl₂(CHCl₃) solution and decomposes to compound 2 and SbCl₃. Both compounds were characterized by the help of ¹H and ¹³C NMR spectroscopy, ESI-mass spectrometry and in the case of 3 by single crystal X-ray diffraction techniques.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Structural characterization of [Fe(NO)(mnt)2] salts

The iron dithiolene compounds [Fe₂(mnt)₄]²⁻ [1]²⁻ and [Fe(NO)(mnt)₂]ⁿ (n = 1−, [2]¹⁻; n = 2−, [2]²⁻) ([mnt]²⁻ = maleonitriledithiolate = [(NC)₂C₂S₂]²⁻) have been characterized structurally by X-ray diffraction as their [Et₄N]⁺ salts at 100 K. Dianion [2]²⁻ is prepared from [2]¹⁻ by reduction with Na[Et₃BH] and is observed to have a bent Fe-NO angle at 149.9(5)° in contrast to the linear configuration of Fe-NO in [2]¹⁻ (180.0°). The change from linear to bent binding mode for NO, an increase of more than 0.1 Å in the Fe-N bond length, and the relative invariance of the Fe-S distances for [2]²⁻ versus [2]¹⁻ indicate that the NO ligand is the site of reduction. The [Et₃NH]⁺ complex of [2]¹⁻ was also identified by crystallography and found to have hydrogen bonding contacts between [Et₃NH]⁺ and the cyano nitrogen atom of an [mnt]²⁻ ligand. Furthermore, relatively close S?S contacts (3.602-3.615 Å) occur between [2]¹⁻ anions, which pack together in an offset, head-to-head fashion. These S?S contacts are absent in the structure of [Et₄N][2]. Infrared spectra show an energy decrease for, and a significant broadening of, the NO bond stretching absorption peak in [2]²⁻, which is consistent with a bent NO ligand sampling a range of conformations both by facile pivoting about the Fe-N axis and by a breathing of the Fe-NO angle.     

Alkynyl Ti-M complexes based on M(CO)4 and MO2 building blocks (M = Mo, W)

The synthesis and properties of heterobimetallic Ti-M complexes of type {[[Ti](μ-η¹:η²-CCSiMe₃)][M(μ-η¹:η²-CCSiMe₃)(CO)₄]} (M = Mo: 5, [Ti] = (η⁵-C₅H₅)₂Ti; 6, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; M = W: 7, [Ti] = (η⁵-C₅H₅)₂Ti; 8, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and {[Ti](μ-η¹:η²-CCSiMe₃)₂}MO₂ (M = Mo: 13, [Ti] = (η⁵-C₅H₅)₂Ti; 14, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti). M = W: 15, [Ti] = (η⁵-C₅H₅)₂Ti; 16, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) are reported. Compounds 5-8 were accessible by treatment of [Ti](CCSiMe₃)₂ (1, [Ti] = (η⁵-C₅H₅)₂Ti; 2, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) with [M(CO)₅(thf)] (3, M = Mo; 4, M = W) or [M(CO)₄(nbd)] (9, M = Mo; 10, M = W; nbd = bicyclo[2.2.1]hepta-2,5-diene), while 13-16 could be obtained either by the subsequent reaction of 1 and 2 with [M(CO)₃(MeCN)₃] (11, M = Mo; 12, M = W) and oxygen, or directly by oxidation of 5-8 with air. A mechanism for the formation of 5-8 is postulated based on the in-situ generation of [Ti](CCSiMe₃)((η²-CCSiMe₃)M(CO)₅), {[Ti](μ-η¹:η²-CCSiMe₃)₂}-M(CO)₄, and [Ti](μ-η¹:η²-CCSiMe₃)((μ-CCSiMe₃)M(CO)₄) as a result of the chelating effect exerted by the bis(alkynyl) titanocene fragment and the steric constraints imposed by the M(CO)₄ entity.The molecular structure of 5 in the solid state were determined by single crystal X-ray diffraction analysis. In doubly alkynyl-bridged 5 the alkynides are bridging the metals Ti and Mo as a σ-donor to one metal and as a π-donor to the other with the [Ti](CCSiMe₃)₂Mo core being planar.     

Lutetium gets a crown: Synthesis, structure and reaction chemistry of the separated ion pair complex, [Li(12-crown-4)2][(C5Me5)2LuMe2]

Reaction of (C₅Me₅)₂Lu(Me)(μ-Me)Li(THF)₃ (2) with excess 12-crown-4 affords the new separated ion pair complex, [Li(12-crown-4)₂][(C₅Me₅)₂LuMe₂] (3), in excellent yield. This complex reacts with 2,6-diisopropylaniline and phenylacetylene to give the methyl amide complex [Li(12-crown-4)₂][(C₅Me₅)₂Lu(Me)(NH-2,6-ⁱPr₂C₆H₃)] (4) and the bis(acetylide) complex [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5), respectively. Attempts to promote methane loss from complexes 3 and 4 to generate a lutetium methylidene or imido complex, respectively, were unsuccessful. The ability of the bis(acetylide) complex 5 to act as a π-tweezer complex was also explored. Reaction between [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5) and CuSPh gave only intractable lutetium products and the copper(I) species [Li(12-crown-4)₂][Cu(C≡C-Ph)₂] (8). The new lutetium complexes have been characterized by elemental analysis and NMR spectroscopy. Finally, the X-ray crystal structures of (C₅Me₅)₂Lu(Me)(μ-Me)Li(THF)₃ (2), [Li(12-crown-4)₂][(C₅Me₅)₂LuMe₂] (3), [Li(12-crown-4)₂][(C₅Me₅)₂Lu(Me)(NH-2,6-ⁱPr₂C₆H₃)] (4), [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5), and [Li(12-crown-4)₂][Cu(C≡C-Ph)₂] (8) are also reported.