石墨炉原子吸收光谱中GdCl3,Gd（NO3）3基体的背景吸收

研究了石墨炉原子吸收光谱中ＧｄＣｌ３、Ｇｄ（ＮＯ３）３基体的背影吸收影响。背景吸收波长特性的研究表明，ＧｄＣｌ３和Ｇｄ（ＮＯ３）３的背景吸收都具有明显的波长特性。蒸发行为研究表明ＧｄＣｌ３的背景吸收主要来自ＧｄＣｌ３的分子蒸气，Ｇｄ（ＮＯ３）３的背景吸收主要来自ＮＯ。钆基体的背景吸收峰高与灰化有关，ＧｄＣｌ３背上曲线轮廓与原子化温度和原子化方式有关。Ｇｄ（ＮＯ３）３的背景吸收远小于ＧｄＣｌ３。本文     

电解制备铒钴中间合金的电化学研究

采用循环伏安法和恒电位电解后的电位－时间曲线等方法，研究了ＫＣｌ－ＥｒＣｌ３熔体中Ｅｒ＾３＋在钴电极上的电极过程。结果表明，Ｅｒ＾３＋在钴电极上还原，首先上成铒钴合金，然后才析出纯金属铒，研究了以钴作自耗阴极制取铒钴合金的工艺条件，得到含铒高达９２ｗｔ％的铒钴中间合金，其组成是Ｅｒ３Ｃｏ和Ｅｒ，铒的回收率＞９０％，电流效率８０％。     

氧化态Co／γ—Al2O3催化剂的结构与反应性能研究：Ⅱ.钴物种微观结？…

采用Ｘ－射线吸收近边结构（ＸＡＮＥＳ）和扩展Ｘ－射线吸收精细结构（ＥＸＡＦＳ）技术,对用不同原料盐和不同焙烧温度制得的Ｃｏ／γ－Ａｌ２Ｏ３催化剂中钴的微观结构进行了详细的表征。ＸＡＮＥＳ结果表明,以硝酸盐为原料盐于５００℃焙烧的样品Ｃｏ（Ｎ）－５００,其Ｃｏ－Ｋ边的近边结构与标样Ｃｏ３Ｏ４相似,而其它样品的近边结构则与标样ＣｏＡｌ２Ｏ４相似,随焙烧温度提高,在吸收边前的弱吸收峰（ｌｓ→３ｄ）逐渐增     

石墨炉原子吸收光谱中尿的背景吸收研究

本文较详细地研究了尿背景吸收的来源, 特点和消除方法, 背景吸收波长特性和在石墨管内蒸发行为的研究表明, 尿的背景吸收主要来自氯化钠, 其次是氯化铵, 其他组份的贡献很小, 时间特性研究表明, 背景吸收大小和背景吸收曲线轮廓与原子化阶段的加热方式和原子化温度有关。还研究了应用基体改进剂和其他减小背景吸收的方法。     

ErCl_3－CaCl_2－LiCl三元体系相图的研究

利用ＤＴＡ研究了ＥｒＣｌ_３ＣａＣｌ_２ＬｉＣｌ三元体系相图。发现该相图有对应于ＥｒＣｌ_３、ＣａＣｌ_２、ＬｉＣｌ和Ｌｉ_３ＥｒＣｌ_６的４个液相面，５条二次结晶线，一个三元低共熔点Ｅ（５８．５％ＥｒＣｌ_３，２３．７％ＣａＣｌ_２，１７．８％ＬｉＣｌ，３９７℃），一个三元转熔点Ｐ（５２．５％ＥｒＣｌ_３，２７．２％ＣａＣｌ_２，２０．３％ＬｉＣｌ，４２８℃）。相应的４相平衡反应为：Ｌ＝ＥｒＣｌ_３＋Ｌｉ_３ＥｒＣｌ_６＋ＣａＣｌ_２；Ｌ＋ＬｉＣｌ＝Ｌｉ_３ＥｒＣｌ_６＋ＣａＣｌ_２．     

Nd（ClO_4）_3和Er（ClO_4）_3与α－双（苯基亚砜）甲烷配合物的

研究了Ｎｄ（ＣｌＯ４）３·ｎＨ２Ｏ－ｂｐｈｓｍ［双（苯基亚砜）甲烷１体系（甲醇－氯仿１：２）和Ｅｒ（ＣｌＯ４）３·ｎＨ２Ｏ－ｂｐｈｓｍ体系（甲醇－氯仿１：２）的电子光谱。分析了在可见光区内，ｆ一ｆ跃迁的强度和强度参数，并从Ｎｄ３＋和Ｅｒ３＋的超灵敏跃迁的振子强度和强度参数Ｔ２与配体ｂｐｈｓｍ浓度的关系，指出了体系中Ｎｄ与ｂｐｈｓｍ形成１：２．５的物种和Ｅｒ３＋与ｂｐｈｓｍ形成１：２的物种。     

INVESTIGATION ON THE PHASE DIAGRAM OF TERNARY SYSTEM LaCl_3-SrCl_2-LiCl

ＩＮＶＥＳＴＩＧＡＴＩＯＮＯＮＴＨＥＰＨＡＳＥＤＩＡＧＲＡＭＯＦＴＥＲＮＡＲＹＳＹＳＴＥＭＬａＣｌ_３－ＳｒＣｌ_２－ＬｉＣｌ￥４ＣｈａｏＧｕｌＺＨＥＮＧ；ＹａｎＫｅＺＨＥＮＧ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＰｅｋｉｎｇＵｎｉｖｅｒｓｉｔ...     

Kam insky型催化剂催化乙烯齐聚──二酚基二茂锆的催化作用

通过改变 Ａｌ／ Ｚｒ 比、反应温度及反应时间, 分别考察了 Ｃｐ２ Ｚｒ（ Ｏ Ａｒ）２／ Ｅ Ａ Ｏ （ Ａｒ＝ Ｃ６ Ｈ５、ｐ  Ｃ６ Ｈ４ Ｍ ｅ、ｍ  Ｃ６ Ｈ４ Ｎ Ｏ２、ｐ  Ｃ６ Ｈ４ Ｎ Ｏ２） ４ 种体系对乙烯齐聚的催化作用． 发现用 Ｃｐ２ Ｚｒ（ Ｏ Ａｒ）２ 代替 Ｃｐ２ Ｚｒ Ｃｌ２ 作为主催化剂, 对于 Ｋａｍ ｉｎｓｋｙ 型体系 Ｃｐ２ Ｚｒ Ｌ２／ Ｅ Ａ Ｏ 催化乙烯齐聚, 具有调变作用,在提高催化活性的同时, 可使低碳烯烃的选择性明显改善． 在 Ｃｐ２ Ｚｒ（ Ｏ Ａｒ）２／ Ｅ Ａ Ｏ 的４ 种催化体系中, 当酚基对位带有强吸电子基团时（ Ａｒ＝ ｐ  Ｃ６ Ｈ４ Ｎ Ｏ２）, 对乙烯齐聚的催化性能最佳．     

铒—谷氨酸配合物的晶体结构及表征

合成了铒与Ｌ－谷氨酸形成的配合物［Ｅｒ２（Ｌ－Ｇｌｕ）２．（Ｈ２Ｏ）８］［ＣｌＯ４）４．３Ｈ２Ｏ，由元素分析、红外光谱、热分析对配合物进行了表征。得到了配合物的单晶，该晶体属于单斜晶系，空间群Ｐ２１，晶胞参数ａ＝１．９９８７（３）ｎｍ，ｂ＝１．６５０５（３）ｎｍ，ｃ＝１．１０４０（２）ｎｍ，β＝１０４．６９（１）＾ｏ，Ｖ＝３．５３８ｎｍ＾３，Ｚ＝２，Ｒ＝０．０４３。晶体结构中每一个独立区含有二个晶     

ErCl_3－MgCl_2－LiCl三元体系的液相限

ＥｒＣｌ＿３－ＭｇＣｌ＿２－ＬｉＣｌ三元体系的液相限彭绍琴，郑朝贵（北京大学化学系北京１００８７１）关键词ＥｒＣｌ＿３，ＥｒＣｌ＿３－ＭｇＣｌ＿２－ＬｉＣｌ三元体系，相图研究稀土熔盐相图对于了解稀土化合物的基本物理化学性质，从已知相图提取热力学数据，...     

Dy3+在Ba3La(BO3)3 中的光致发光

研究了Ba3La(BO3)3 基质中Dy3 的光致发光特性; 探讨了RE3 的电荷半径比(z/r)和Ce3 , Dy3 含量对Dy3 发光强度及发光颜色的影响; 分析了Ba3La(BO3)3 中Ce3 对Dy3 发光的敏化作用; 确定了Dy3 的 4F9/2→6H15/2及4F9/2→6H13/2跃迁发射的浓度猝灭机制均为电偶极-电四极相互作用.     

3-Trifluoromethyl- and 3-difluoromethyl-thalidomides

Syntheses of racemic 3-trifluoromethyl- and 3-difluoromethyl-thalidomide starting from 2-(tert-butyloxycarbonylimino)-3,3,3-trifluoropropionate or -3,3-difluoropropionate as fluorine-containing building blocks are described.     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

白光LED用荧光材料Ba3 Gd( BO3 )3:Eu3+的发光性能研究

用高温固相反应法制备了稀土离子Eu3+ 掺杂的三元稀土硼酸盐Ba3Gd(BO3)3发光材料, 通过X射线衍射 (XRD) 、荧光光谱和扫描电镜 (SEM) 等测试手段对Ba3Gd(BO3)3:Eu3+ 荧光粉的制备条件、发光性能以及形貌进行了研究. XRD结果表明, 在1000 ℃时可得到Ba3Gd(BO3)3 纯相. 扫描电镜照片显示颗粒基本为球形, 粒径约为200～400 nm. 发光光谱测试表明, Ba3Gd(BO3)3:Eu3+荧光粉在近紫外区(UV) (396 nm)和蓝光区(466 nm)可以被有效地激发, 分别用255和396 nm的紫外光激发样品时, 以Eu3+ 的 5D0-7F2 (611和616 nm) 超灵敏跃迁为主要发射峰. 当Eu3+的掺杂浓度为10%(摩尔分数)时, Ba3Gd(BO3)3:Eu3+ 在611和616 nm处的发光强度最大. 因此, 这种荧光粉是一种可能应用在白光LED上的红色荧光材料.     

GdF3∶Er3+，Yb3+的合成和上转换发光特性

采用水热法制备了Er3 离子浓度为3%,yb3 离子浓度分别为10%,20%的GdF3:Er3 ,Yb3 .XRD结果表明:合成的样品均为正交结构的GdF3,Cd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26 nm.研究了980 nm红外光激发的上转换发射光谱.结果表明:红光和绿光发射分别来自于Er3 离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁.样品的绿光发射强度较红光发射强.但绿光和红光发射的相对强度比例与Yb3 离子浓度有关.对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论.     

Die Perthioborate RbBS3, TIBS3 und TI3B3S10

The Perthioborates RbBS₃, TIBS₃, and Tl₃B₃S₁₀ . RbBS₃ (P2₁/c, a=7.082(2) Å, b=11.863(4) Å, c=5.794(2) Å, β=106.54(2)°) was prepared as colourless, plate-shaped crystals by reaction of stoichiometric amounts of rubidium sulfide, boron, and sulfur at 600°C and subsequent annealing. TlBS₃ (P2₁/c, a=6.874(3) Å, b=11.739(3) Å, c=5.775(2) Å, β=113.08(2)°) which is isotypic with RbBS₃ was synthesized from a sample of the composition Tl₂S · 2 B₂S₃. The glassy product which was obtained after 7 h at 850°C was annealed in a two zone furnace for 400 h at 400→350°C. Yellow crystals of TlBS₃ formed at the warmer side of the furnace. Tl₃B₃S₁₀ (P1 , a=6.828(2) Å, b=7.713(2) Å, c=13.769(5) Å, α=104.32(2)°, β=94.03(3)°, γ=94.69(2)°) was prepared as yellow plates from stoichiometric amounts of thallium sulfide, boron, and sulfur at 850°C and subsequent annealing. All compounds contain tetrahedrally coordinated boron. The crystal structures consist of polymeric anion chains. In the case of RbBS₃ and TlBS₃ nonplanar five-membered B₂S₃ rings are spirocyclically connected via the boron atoms. To obtain the anionic structure of Tl₃B₃S₁₀ every third B₂S₃ ring of the polymeric chains of MBS₃ is to be substituted by a six-membered B(S₂)₂B ring.     

Electrochemical oxidation of 3-imidazoline 3-oxides

Cyclic voltammetry was used to study the electrochemical oxidation of substituted 3-imidazoline 3-oxides. It was determined that the oxidation potentials (E _p/2) of the compounds depend on the nature of the substituents in the 1 and 4 positions of the ring. A correlation analysis ofE _p/2 of the the compounds and _I and _R of the substituent constants in the 4 position of the ring was carried out. The obtained results show that oxidation of 3-imidazoline 3-oxides can occur at the nitrone or amine fragment, depending on the nature of the substituent in the 1 position of the ring.Institute of Organic Chemistry, Russian Academy of Sciences, 630090 Novosibirsk. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2545–2550, November, 1992.     

Photoluminescent Property Effect of Sc3+ on Er3+/y3+/yb3+ Doped Al2O3 Powders

The photoluminescence (PL) property effect of Sc3+ on the Er3+/Y3+/Yb3+ doped Al2O3 powders prepared by sol-gel method has been investigated. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) implied that the distribution of dopants (Er3+ , Y3+ , Yb3+ , Sc3+) was improved effectively with the rise of Sc3+ concentration. The Fourier transform infrared spectra (FTIR) results demonstrated that the ligand around the quenching center -OH and the population of -OH were altered by introducing different amounts of Sc3+ . The PL intensity centered at 1530 nm was increasingly improved with the rise of Sc3+ concentration, as well as the corresponding full widths at the half maximum (FWHM) and lifetime. The optimized PL intensity was 4.7 times higher than that non-Sc3+ doped sample for the Al2O3 powders codoped with 10mol% Sc3+ . This material can be promising candidates for optical fiber amplifier.     

Er^3＋／Yb^3＋：Sr3Y2（BO3）4晶体的光谱和激光性质

采用提拉法生长了双掺Yb3+和Er3+离子浓度分别为18.63%和0.87%(原子分数)的Sr3Y2(BO3)4晶体.利用测量的偏振吸收谱结合Judd-Ofeh理论,拟合得到了该晶体中Er3+离子的偏振和有效J-O参数.测量了Er3+离子4I13/2能级和Yb3+离子2F5/2能级的荧光衰减曲线,并计算了4I13/2能级的荧光量子效率和Yb3+到Er3+的能量传递效率.利用Fuchtbauer-Ladenberg公式计算了Er3+离子4I13/2→4I15/2跃迁的偏振受激发射截面.在平-凹谐振腔中,利用97nm波长光纤耦合准连续半导体激光端面泵浦1.12mm厚的该晶体,当输出镜透过率为1.5%时,获得了最大输出功率为1.3 w和斜率效率为20%的1560 nm附近的激光输出.结果表明,Er3+/Yb3+:Sr3+Y2+(BO3)4晶体是一种优良的1.5～1.6 μm波段激光的增益介质.     

3-Acylaminopyrazole derivatives via a regioselectively N-protected 3-nitropyrazole

A simple procedure for the selective protection of the endocyclic 1-N of 3-aminopyrazoles as tert-butoxycarbamate (Boc) in good yield is described. A 3-nitropyrazole derivative represents the key intermediate with the nitro substituent determining the regiochemistry of the obtained protected compound. Subsequent acylation at the exocyclic amino group gave rise, after Boc removal, to a series of 3-acylaminopyrazoles in high yields and purities.