Guided modes in the chiral negative refractive index fiber

The novel characteristics of guided modes in the chiral negative refractive index fiber are investigated theoretically in this letter.We derive the characteristic equation of guided modes.Based on two types of chiral metamaterial parameters,we present the dispersion curves,energy flux,and power of guided modes.Some abnormal features,such as the existence of surface mode and dispersion curves with different shapes,intersection of dispersion curves of different guided modes,negative energy flux in the achiral cladding,and zero power at some normalized frequencies,are found in the chiral negative refractive index fiber.     

Plasmon-Assisted Phase-Matched Second- and Third-Harmonic Generation in Single-Negative Heterostructures

Dispersion relations of surface plasmon polaritons （SPPs） in sandwiched optical systems are studied. The system is actually a kind of SPP waveguides, with two kinds of single negative material （SNG） as core and cladding layers, respectively. Since both TM and TE polarized SPPs can be excited in the structure, the dispersion of SPPs becomes more abundant and leads to colorful nonlinear opticM properties. The authors demonstrate the effective phase-matched second and third-harmonic generation （SHG, THG） assisted by the coupled SPPs. A cascaded second-order nonlinear process can Mso be achieved in the structure when the thickness of the core layer is properly selected, leading to the simultaneous SHG and THG. Further investigations show that much easier phase-matching can be fulfilled in the SNG waveguide array. Our results would be of potential use for surface-enhanced frequency conversion device such as light emitters or lasers.     

Excitation of anti-symmetric coupled spoof SPPs in 3D SIS waveguides based on coupling

According to the electromagnetic field distributions, there exist two kinds of coupled spoof surface plasmon polaritons(SSPPs), the symmetric and anti-symmetric modes, in the three-dimensional(3D) subwavelength spoof–insulator–spoof(SIS) waveguide. We study the dispersion and excitation of the two kinds of coupled SSPPs supported by the 3D SIS waveguide. The evolution of the dispersion with the thickness and gap width of the waveguide is numerically investigated,and we give a theoretical analysis according to the coupling mechanism. Specially, based on the coupling mechanism,we design a zipper structure, through which the excitation and propagation of the anti-symmetric coupled modes can be realized effectively.     

Numerical studies of surface and bulk modes in attenuated total reflection spectra

The dispersion relations of normal modes in the layered constructions are studied. In the frequency region with negative permittivity, we investigate the normal modes near the air--metal and the air--matematerial interfaces and compare them. An extra bulk mode appearing in a pass band of two media is found near the air--matematerial interface, which is different from the air--metal case. Moreover, the bulk mode will be further proved by the attenuated total reflection (ATR) technique, in which the coupling between the incident electromagnetic waves and the normal modes is studied. For p-polarized incident waves, the ATR spectra based on the Otto and the Kretschmann configurations are obtained numerically, where the dips present the excitations of the surface and bulk modes. Furthermore, we also discuss the influences of the middle layer thickness, the incident angle and the damping term on the reflection in detail. It is found that the coupling frequencies and the maximum strength are strongly dependent on the above media parameters.     

Investigation of titanium nitride coating by broadband laser ultrasonic spectroscopy

We present a laser ultrasonic method to investigate a titanium nitride(TiN) coating specimen.The technique is based on the principle of surface acoustic wave (SAW) dispersion during acoustic propagation on a half-space with the presence of a thin layer.Due to the high efficiency of laser line-source excitation,we have been able to generate and detect a SAW with an excellent signal-to-noise ratio in a wide frequency band.An inverse fitting algorithm was employed to extract simultaneously the thickness and the elastic parameters of the TiN coating from the experimental SAW velocity dispersion curve.     

Anomalous Dispersion Behavior of Staggered Arranged Metal Nanowire Arrays

The dispersion relations of staggered arranged metal nanowire arrays are numerically investigated. It is demonstrated that the structure can support the propagation of plasmon modes with zero and negative group velocities derived directly from the dispersion curves, apart from normal plasmon modes with positive group velocities. Furthermore, the effects of the structural parameters on the dispersion behaviors of plasmon modes are also examined.     

Zero dispersion wavelength and dispersion slope control of hollow-core photonic bandgap fibres

This paper investigates the zero dispersion wavelength and dispersion slope control of hollow-core photonic bandgap fibres (PBGFs) by using a full-vector finite element method. By simulation we found that theoretically the zero dispersion wavelength can be tailored by respectively changing the rounded diameter of air holes, pitch, refractive index, normalized thickness of core rings, and hole diameter to pitch ratio. At the same time the tailoring of dispersion slope can also be realized by changing the rounded diameter of air holes or pitch or normalized thickness of core rings. To illustrate the reasonability of fibre designs, this paper also gives the variance of normalized interface field intensity which measures the scattering loss relatively versus wavelength for different designs. From the viewpoint of loss, varying the rounded diameter and the thickness of core ring could shift zero wavelength but it is difficult to get the required parameters within so tiny range in practical drawing of PBGFs, on the other hand, it is possible in practice to respectively alter the pitch and refractive index to shift zero wavelength. But varying hole diameter to pitch ratio is not worthwhile because they each induce large increase of loss and narrowness of transmission bandwidth. The zero dispersion wavelength can be engineered by respectively varying the rounded diameter of air holes, pitch, refractive index, and normalized thickness of core rings without incurring large loss penalties.     

Realization of absolute negative refraction index by a photonic crystal using anisotropic dielectric material

A method to realize absolute negative refraction index -1 with a two-dimensional （2D） photonic crystal is presented by introducing dielectric anisotropy in the photonic crystal material. The band structures of E-polarization mode and H-polarization mode can be adjusted by changing the parameters of materials. Thus the two modes with different polarizations have the same negative refraction index -1 for the same frequency. The results are demonstrated by numerical simulation based on the finite-difference time-domain （FDTD） method.     

Broadband dispersion compensating fiber using index-guiding photonic crystal fiber with defected core

We present a novel broadband dispersion compensating photonic crystal fiber with defected core in this paper.The small central defect of air hole can flexibly control the chromatic dispersion properties of this kind of photonic crystal fiber.This kind of fiber has broadband large negative chromatic dispersion,and the chromatic dispersion coefficient varies from-440 to-480 ps/(nm·km)in the measured wavelength range of 1500-1625 nm.The calculated chromatic dispersion curve is well matched to the measured chromatic dispersion coefficient in the range of 1500-1625 nm.The proposed photonic crystal fiber can be used to design the dispersion compensating fiber in the desired wavelength range by adjusting its structural parameters.     

Surface Polaritons in a Wire Medium with Spatial Dispersion

The dispersion relations of the surface polariton in a semi-infinite wire medium with spatial dispersion are analysed. In comparison with the traditional spatial dispersive medium there only exists one branch instead of multibranch for the dispersion curve. The possibility of the experimentally observing the surface polaritons by attenuated total reflection is simulated numerically.     

Tunable highly birefringent photonic bandgap fibers

A novel tunable highly birefringent photonic bandgap fiber (PBGF) is designed theoretically by filling its air holes with high-index material. The transmission band can be continuously tuned by changing the refractive index of the filling material. Accordingly, the tunable modal birefringence and polarization mode dispersion of the PBGFs are investigated by adjusting the refractive index of the filling material. Furthermore, we have also analyzed the effect of surface modes in the photonic bandgap on the characteristics of the tunable PBGFs. The simulation results show the feasibility of constructing birefringence-tunable photonic crystal fibers and related fiber devices in practical applications.     

含单负材料三明治结构的电磁隧穿特性

在理论分析的基础上,结合实验研究了单负材料/正折射率材料(或单负材料)/单负材料三明治结构的电磁隧穿性质.这种结构的电磁隧穿来源于入射平面波与结构的表面或体极化激元的耦合,从理论上讨论并计算了正入射情况下这种结构中的极化激元的色散关系.发现:由单负材料作为边界而正折射率材料为中间层的三明治结构具有体极化激元,这种极化激元的共振频率随着中间层厚度的增加向低频移动;由不同性质的单负材料构成的三明治结构具有两条色散曲线,这两条色散曲线随着中间层厚度的增加而简并.随后基于L-C传输线技 关键词： 单负材料 极化激元 隧穿 L-C传输线')" href="#">L-C传输线     

Investigation on characteristics of W-type fiber with an inner cladding made of negative refractive index materials

A doubly clad optical fiber with an inner cladding made of negative refractive index material was proposed and the modes distribution, dispersion and time delay were investigated by fully vectorial numerical method. The results indicate that HE₁₂ mode can be operated as a single mode, the cut-off frequency of modes shifts to low normalized frequency with increasing thickness of inner cladding made of negative index materials, large negative dispersion and time delay can be obtained and tailored by the inner cladding. These results provide theoretical basis for designing novel fibers or optical devices.     

Tuning properties of long period gratings in photonic bandgap fibers

We investigate the thermal tuning properties of long period gratings (LPGs) in a fluid-filled photonic bandgap fiber (PBGF). The combination of strong, resonant waveguide dispersion, characteristic of all PBGF modes, and the large thermo-optic coefficients of fluids yields highly tunable grating resonances. We measure grating resonances in three transmission bands with large tuning coefficients of up to -1.58 nm/degrees C, which match numerical results. We derive an analytic model for the PBGF LPG tuning coefficient to show how it depends on both the shift of the transmission bands and the dispersion of the coupled modes.     

Propagation of surface waves at the interface between nonlinear MTMs and anisotropic materials

Metamaterials (MTMs), which have both negative permeability and negative permittivity, have potential applications in optoelectronics and communications. These materials are fabricated in laboratories which is an added advantage. The focus of this work is on the propagation of surface waves at the interface between nonlinear MTMs and anisotropic materials in the optical range. The dispersion equation is derived from Maxwell’s equations. The dispersion equation is solved numerically to study the characteristics of the propagated wave. Only TE modes are considered. The results display the dependence of the propagating waves on the characteristics of the structure composite materials.     

电磁波在负折射材料填充的3层平板波导中的传播特性

从电磁场理论出发对负折射材料填充的3层平板波导的传播特性进行研究,并进行了数值计算,分析TE和TM波在平板中传播的性质,得到了电磁波的模式方程,与电磁波在右手材料填充的平板波导中的传播特性做了对比,考察了TE模式的能流密度,进行了归一化计算。结果分析表明：基模、一阶模不存在,且任何模式都存在一个截止厚度,随着厚度的增大,模式数量也增多;在一定的入射频率下,平板薄膜厚度趋向一定数值时,可以同时传播多种模式的波,并且入射波频率越高,波导同时存在多种模式的可能性越大;与右手材料相比,左手材料填充相同尺寸的3层平板波导可以传播更高能量的电磁波,导波效果更好。     

Investigation of one-dimensional photonic crystals composed of dispersive materials

One-dimensional photonic crystals (1DPCs) composed of dispersive materials (including negative refractive index materials, negative μ materials, and negative ? materials) are proposed. The dependence of the band gaps on the angle of incidence and thickness scale are investigated by using the transfer matrix method. Simulation results show that the band gaps of these dispersive material 1DPC are insensitive to the thickness scale. The defect modes of these doped 1DPCs behave specially when the thickness of the defect layer, the angle of incidence and the thickness scale of PC change.     

Compact-2D FDTD for waveguides including materials with negative dielectric permittivity, magnetic permeability and refractive index

An efficient compact-2D finite-difference time-domain method is presented for the numerical analysis of guided modes in waveguides that may include negative dielectric permittivity, negative magnetic permeability and negative refractive index materials. Both complex variable and real variable methods are given. The method is demonstrated for the analysis of channel-plasmon-polariton guided modes in triangular groves on a metal surface. The presented method can be used for a range of waveguide problems that were previously unsolvable analytically, due to complex geometries, or numerically, due to computational requirements of conventional three-dimensional finite-difference time-domain methods. A three-dimensional finite-difference time-domain algorithm that also allows analysis in the presence of bound or free electric and equivalent magnetic charges is presented and an example negative refraction demonstrates the method.     

Theoretical investigation of hierarchical sub-wavelength photonic structures fabricated using high-order waveguide-mode interference lithograph

This paper presents the theoretical investigation of hierarchical sub-wavelength photonic structures with various periods and numbers of layers, which were fabricated using a high-order waveguide-mode interference field. A 442-nm laser was used to excite high-order waveguide modes in an asymmetric metal-cladding dielectric waveguide structure. The dispersion curve of the waveguide modes was theoretically analyzed, and the distribution of the interference field of high-order waveguide modes was numerically simulated using the finite-element method. The various dependences of the characteristics of hierarchical sub-wavelength photonic structures on the thickness and refractive index of the photoresist and the waveguide mode were investigated in detail. These hierarchical sub-wavelength photonic structures have various periods and numbers of layers and can be fabricated by a simple and low-cost method.     

各向异性色散左手材料平面波导的导模特性(英文)

对芯层为左手材料而内外包层都是普通材料的非对称三层平面波导TE振荡模进行了分析.在考虑左手材料色散和各向异性的情况下,从Maxwell方程组出发,得到了TE振荡模的色散方程和功率流分布,并且画出了相应的色散曲线.我们找到了8个TE振荡模,而且包括基模.随着模阶数的增加,模色散曲线右移,功率流曲线下移.但是,随着波导厚度的增加,色散曲线左移,功率流曲线上移.此外,TE振荡模有反常色散特性和负的群速,这正揭示了左手材料的本质特性.