Highly photoresponsive monolayer-protected gold clusters by self-assembly of a cyclodextrin-azobenzene-derived supramolecular complex

Reversibly-photoswitchable gold nanoparticles containing azobenzene and exhibiting a light response "virtually identical" to that of the free chromophore were achieved by self-assembling a host-guest inclusion complex between alpha-cyclodextrin and an azobenzene-terminated alkanethiol in an aqueous medium.     

Inhibition and acceleration of deuterium exchange in amide-functionalized monolayer-protected gold clusters

Hydrogen/deuterium exchange rates in amide-functionalized monolayer protected gold clusters (MPCs) are controlled by the radial nature of the surface, with inhibition and catalysis observed at different chain lengths.     

Application of capillary zone electrophoresis for separation of water-soluble gold monolayer-protected clusters

An effective capillary electrophoretic technique for separating samples of negatively charged, polydisperse, water-soluble gold monolayer-protected cluster (Au MPC) protected by monolayers of N-acetyl-L-cysteine has been developed. The separation mechanisms of the Au MPC in CZE suggest that the larger core sizes Au MPC emerge first from the capillary. The electrophoretic separation depends on pH, buffer concentration, and organic modifiers. The addition of aliphatic alcohols to the run buffer can improve the separation of Au MPC by reducing the EOF and changing the selectivity between the Au MPCs. The enhancement of resolution is attributed to the more significant difference in the charge-to-size ratio between the Au MPCs. The run buffer containing 20 v/v % ethanol provides the best separation for water-soluble Au MPC. Our proposed CE method provides a powerful tool to evaluate and separate the water-soluble Au MPC products.     

Microfluidic synthesis and catalytic application of PVP-stabilized, approximately 1 nm gold clusters

Small PVP-stabilized gold clusters were successfully prepared by the homogeneous mixing of continuous flows of aqueous AuCl 4 (-) and BH 4 (-) in a micromixer. Spectroscopic characterization revealed that microfluidic synthesis could yield monodisperse Au:PVP clusters with an average diameter of approximately 1 nm, which is smaller than clusters produced by conventional batch methods. These approximately 1 nm Au:PVP clusters exhibited higher catalytic activity for the aerobic oxidation of p-hydroxybenzyl alcohol than did Au:PVP clusters prepared by batch methods.     

Interfacial reactivity of monolayer-protected clusters studied by scanning electrochemical microscopy

Solutions of monodisperse monolayer-protected clusters (MPCs) of gold can be used as multivalent redox mediators in electrochemical experiments due to their quantized double-layer charging properties. We demonstrate their use in scanning electrochemical microscopy (SECM) experiments wherein the species of interest (up to 2-electron reduction or 4-electron oxidation from the native charge-state of the MPCs) is generated at the tip electrode, providing a simple means to adjust the driving force of the electron transfer (ET). Approach curves to perfectly insulating (Teflon) and conducting (Pt) substrates are obtained. Subsequently, heterogeneous ET between MPCs in 1,2-dichloroethane and an aqueous redox couple (Ce(IV), Fe(CN)63-/4-, Ru(NH3)63+, and Ru(CN)64-) is probed with both feedback and potentiometric mode of SECM operation. Depending on the charge-state of the MPCs, they can accept/donate charge heterogeneously at the liquid-liquid interface. However, this reaction is very slow in contrast to ET involving MPCs at the metal-electrolyte interface.     

Synthesis and stability of monolayer-protected Au38 clusters

A synthesis strategy to obtain monodisperse hexanethiolate-protected Au38 clusters based on their resistance to etching upon exposure to a hyperexcess of thiol is reported. The reduction time in the standard Brust-Schiffrin two-phase synthesis was optimized such that Au38 were the only clusters that were fully passivated by the thiol monolayer which leaves larger particles vulnerable to etching by excess thiol. The isolated Au38 was characterized by mass spectrometry, thermogravimetric analysis, optical spectroscopy, and electrochemical techniques giving Au38(SC6)22 as the molecular formula for the cluster. These ultrasmall Au clusters behave analogously to molecules with a wide energy gap between occupied (HOMO) and unoccupied levels (LUMO) and undergo single-electron charging at room temperature in electrochemical experiments. Electrochemistry provides an elegant means to study the electronic structure and the chemical stability of the clusters at different charge states. We used cyclic voltammetry and scanning electrochemical microscopy to unequivocally demonstrate that Au38 can be reversibly oxidized to charge states z = +1 or +2; however, reduction to z = -1 leads to desorption of the protecting thiolate monolayer. Although this reductive desorption of thiol from the cluster surface is superficially analogous to electrochemical desorption of planar self-assembled monolayers (SAMs) from macroscopic electrodes, the molecular details of the process are likely to be complicated based on the current view that the thiolate monolayer in clusters is in fact composed of polymeric Au-S complexes.     

Sensitive iodate sensor based on fluorescence quenching of gold nanocluster

In this report we described a highly selective and sensitive iodate sensor. Due to its interaction with fluorescent gold nanoclusters, iodate was capable of oxidizing and etching gold core of the nanoclusters, resulting in fluorescence quenching. Furthermore, it was found that extra iodide ion could enhance this etching process, and even a small amount of iodate could lead to significant quenching. Under an optimized condition, linear relationship between the iodate concentration and the fluorescence quenching was obtained in the range 10 nM–1 μM. The developed iodate sensor was found selective and capable of detecting iodate as low as 2.8 nM. The sensor was then applied for the analysis of iodate in real sample and satisfactory recoveries were obtained.     

Size-controlled synthesis of near-monodisperse gold nanoparticles in the 1-4 nm range using polymeric stabilizers

We report here a simple one-step protocol for the preparation of near-monodisperse gold hydrosols in the small size regime (<5 nm). The particle size can be controlled by varying the concentration of the stabilizing polymer, which can be readily displaced by thiol ligands to yield monolayer protected clusters of the usual type.     

Understanding the oxidative stability of gold monolayer-protected clusters in the presence of halide ions under ambient conditions

We report on the oxidative stability of thiol-passivated Au monolayer-protected clusters (MPCs) made via a modified Brust-Schiffrin method. A sequential oxidation of the anchored thiol groups to disulfide and sulfonate groups and the oxidation of Au atoms to Au3+ species is observed upon exposure of Au MPCs to air in the presence of halide anions. In addition, the average nanoparticle size grows via aggregation of the MPCs, leading eventually to partial oxidation of the Au MPCs and precipitation of the remaining nanoparticles from solution or to complete oxidation of the gold atoms at high halide concentrations. These results show that Au MPCs are prone to oxidation in air in the presence of halide anions, and therefore, particles made using phase transfer reagents such as tetraoctylammonium bromide must be thoroughly removed to avoid particle size growth, oxidation, and precipitation of the Au MPCs. In addition, for biological applications involving Au MPCs, care must be taken to ensure that oxidation of MPCs in air is not problematic when working in media containing halide anions.     

A novel immunoassay based on the dissociation of immunocomplex and fluorescence quenching by gold nanoparticles

This study reports a novel, simple and sensitive immunoassay using fluorescence quenching caused by gold nanoparticles coated with antibody. The method is based on a non-competitive heterogeneous immunoassay of human IgG conducted by the typical procedure of sandwich immunocomplex formation. Goat anti-human IgG was first adsorbed on polystyrene microwells, and human IgG analyte was captured by the primary antibody and then sandwiched by antibody labeled with gold nanoparticles. The sandwich-type immunocomplex was subsequently dissociated by the mixed solution of sodium hydroxide and trisodium citrate, the solution obtained, which contains gold nanoparticles coated with antibody, was used to quench fluorescence. The fluorescence intensity of fluorescein at 517 nm was inversely proportional to the logarithm of the concentration of human IgG in the dynamic range of 10-5000 ng mL⁻¹ with a detection limit of 4.7 ng mL⁻¹. The electrochemical experiments and the UV-vis measurements were applied to demonstrate whether the immunoglod was dissociated completely and whether the gold nanoparticles aggregated after being dissociated, respectively. The proposed system can be extended to detect target molecules such as other kinds of antigen and DNA strands, and has broad potential applications in disease diagnosis.     

Quenching of molecular fluorescence on the surface of monolayer-protected gold nanoparticles investigated using place exchange equilibria

The insertion of fluorescently labeled thiols into the protecting self-assembled monolayer on the surface of gold nanoparticles through place exchange reactions and the effects of this insertion on the photophysical properties of the fluorophores are investigated. Analysis of solution-phase fluorescence data using a dynamic equilibrium model yields the equilibrium constant for the place exchange equilibrium, as well as the relative fluorescence brightness of the fluorophores on the particle surface. In all cases we find a significant quenching of the fluorescence, and potential reasons for this quenching are discussed. In the case of these relatively small particles (4.5 nm diameter), the quenching appears to be mainly related to enhanced nonradiative deactivation pathways. The place exchange equilibrium constant reveals a reduced affinity of the fluorescently labeled thiols for insertion into the nonfluorescent alkylthiol monolayer (K(eq) approximately 0.2) compared to unlabeled alkylthiols.     

Absorbance change and static quenching of fluorescence of meso-tetra(4-sulfonatophenyl)porphyrin (TPPS) by trinitrotoluene (TNT)

Meso-tetra(4-sulfonatophenyl)porphyrin (TPPS) interacts with trinitrotoluene (TNT) and forms a 1:1 complex with a new absorbance peak at 422 nm. TNT quenches TPPS emission intensity at 645 and 702 nm when excited at 413 nm. The TPPS-TNT complex is formed in the ground state on the basis of a linear Stern-Volmer plot indicative of static quenching. The association constants determined from absorbance and fluorescence studies are in excellent agreement.     

Static and dynamic model for 4-aminodiphenyl fluorescence quenching by carbontetrachloride in hexane

The fluorescence quenching of 4-aminodiphenyl (4ADP) with chloromethanes (CH2Cl2, CHCl3 and CCl4) have been studied in solvents of different polarity and viscosity. The quenching rate constants (kq) have been determined in all solvents. For CCl4 and CHCl3 quenching, the kq depends on solvent viscosity whereas for CH2Cl2, the kq values show a mixed trend with no clear-cut variation with either solvent polarity or solvent viscosity. Quenching mechanism involving an intermediate donor-acceptor complex formation is proposed for CH2Cl2 quenching. A positive deviation was observed in the Stern-Volmer (SV) plot for CCl4 quenching in hexane. The static-dynamic model could explain this.     

Oxidation of highly unstable <4 nm diameter gold nanoparticles 850 mV negative of the bulk oxidation potential

Here we describe the oxidation of <4 nm diameter Au nanoparticles (NPs) attached to indium tin oxide-coated glass electrodes in Br(-) and Cl(-) solution. Borohydride reduction of AuCl(4)(-) in the presence of hexanethiol or trisodium citrate (15 min) led to Au NPs <4 nm in diameter. After electrochemical and ozone removal of the hexanthiolate ligands from the thiol-coated Au NPs, Au oxidation peaks appeared in the range 0-400 mV vs Ag/AgCl (1 M KCl), which is 850-450 mV negative of the bulk Au oxidation peak near 850 mV. The oxidation potential of citrate-coated Au NPs is in the 300-500 mV range and those of 4 and 12 nm diameter Au NPs in the 660-780 mV range. The large negative shift in potential agrees with theory for NPs in the 1-2 nm diameter range. The oxidation potential of Au in Cl(-) solution is positive of that in Br(-) solution, but the difference decreases dramatically as the NP size decreases, showing less dependence on the halide for smaller NPs.     

荧光猝灭法测定次黄嘌呤及机理研究

研究了次黄嘌呤猝灭伊文思蓝的荧光猝灭机理并根据次黄嘌呤对伊文思蓝荧光的猝灭作用建立了测定次黄嘌呤的新方法.线性回归方程为:ρ=6.292×103F-1-26.49,相关系数为0.9990,线性范围为0.20～20.0 μg/mL,检出限为0.14 μg/mL,相对标准偏差(RSD)为2.5%.求算了伊文思蓝与次黄嘌呤的形成常数K=2.63×102L/moL,实验了pH、放置时间、干扰离子等对测定的影响.     

Synthesis and surface structure of thymine-functionalized, self-assembled monolayer-protected gold nanoparticles

Thymine-functionalized SAM-protected gold nanoparticles with diameters of 2.2 +/- 0.3 nm and 7.0 +/- 1.0 nm were prepared via a modified two-phase transfer method. UV-vis spectra showed that particle size and solvent type, as well as surface charge, influenced the gold surface plasmon band absorption, along with the interaction between thymine terminal groups in the solution. Although the bulky thymine end groups interacted strongly on the particle surface, a well-ordered monolayer of thyminethiol derivatives with a long hydrocarbon chain was formed on the particle surface, exhibiting an ordered, all-trans conformation of the methylene backbone, similar to those of corresponding self-assembled monolayers (SAMs) generated from normal alkanethiols. A larger particle size and a longer reaction time facilitated the formation of more ordered thymine-terminated thiol SAMs. Thermal analysis indicated that reorientation of the SAMs during heat treatment occurred by two processes, caused possibly by the separate recrystallization of the hydrocarbon long chains and thymine units. More ordered SAMs with a higher thermal stability were formed on the larger particle surfaces when compared with those on the smaller ones. A greater density of molecular packing was found on the smaller particle surfaces. However, SAMs formed on the larger gold particles resembled 2D SAMs on the smooth, flat gold surfaces. XPS results confirmed the thymine structure as well as the chemical bond between gold and sulfur. One type of adsorbed sulfur species was observed for the smaller particles and two for the larger ones, but a slightly higher binding energy of thiolate was found for the smaller ones.     

Label free DNA detection based on gold nanoparticles quenching fluorescence of Rhodamine B

A novel and sensitive label free DNA detection method using gold nanoparticles (GNPs) and Rhodamine B (RB) has been developed. The assay is based on the following two properties. One is the different adsorption properties of single-stranded and double-stranded DNA on GNPs in colloidal solution. The other is the different quenching ability of aggregated GNPs and dispersed GNPs on RB. Un-aggregated GNPs could effectively quench the fluorescence of RB. However, the quenching ability greatly decreases after GNPs aggregated. The hybridization of probe DNA and target DNA is monitored by the fluorescence detection after the RB is added to the solution. Under the optimal experimental conditions, the detection limit of this assay is 2.9×10(-13) mol L(-1).     

Substituent effects on the exchange dynamics of ligands on 1.6 nm diameter gold nanoparticles

The kinetics of exchange ofphenylethanethiolate ligands (PhC2S) of monolayer-protected clusters (MPCs, average formula Au140(PhC2S)53) by para-substituted arylthiols (p-X-ArSH) are described. 1H NMR measurements of thiol concentrations show that the exchange reaction is initially rapid and gradually slows almost to a standstill. The most labile ligands, exchanging at the shortest reaction times, are thought to be those at defect sites (edges, vertexes) on the nanoparticle core surface. The pseudo-first-order rate constants derived from the first 10% of the exchange reaction profile vary linearly with in-coming arylthiol concentration, meaning that the labile ligands exchange in a second-order process, which is consistent with ligand exchange being an associative process. A linear Hammett relationship with slope p = 0.44 demonstrates a substituent effect in the ligand place exchange reaction, in which the bimolecular rate constants increase for ligands with electron-withdrawing substituents (1.4 x 10-2 and 3.8 x 10(-3) M(-1) s(-1) for X = NO2 and 4-OH, respectively). This is interpreted as the more polar Au-S bonds at the defect sites favoring bonding with more electron deficient sulfur moieties. At longer reaction times, where ligands exchange on nondefect (terrace) as well as defect sites, the extent of ligand exchange is higher for thiols with more electron-donating substituents. The difference between short-time kinetics and longer-time pseudoequilibria is rationalized based on differences in Au-S bonding at defect vs nondefect MPC core sites. The study adds substance to the mechanisms of exchange of protecting ligands on nanoparticles. The scope and limitations of 1H NMR spectroscopy for determining rate data are also discussed.     

四溴荧光素荧光猝灭法测定司帕沙星

基于司帕沙星能够猝灭四溴荧光素的荧光且荧光猝灭程度与司帕沙星的量成正比,建立了一种测定微量司帕沙星的方法。在pH3．5的Clark—Lubs缓冲溶液中,四溴荧光素激发波长λex=485nm、发射波长λem=545nm,司帕沙星的质量浓度在0～2．0mg／L范围内符合比耳定律,方法检出限为42．7μg/L。已用于片剂及胶囊中司帕沙星的测定。6次平行测定回收率为93．8％～104．3％,相对标准偏差为1．1％～2．8％。     

Optical fiber sensor for berberine based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole

A new optical fiber sensor was prepared for the determination of berberine in aqueous solution using a micrometer-sized flow-cell and a bifurcated optical fiber. The sensing is based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole (PBBO) in the PVC membrane. This process is accompanied by non-fluorescent ground-state complex formation. With this sensor, berberine can be determined in sample solutions from 2.42 × 10^–5 mol L^–1 to 6.04 × 10^–7 mol L^–1. Satisfactory reproducibility, reversibility, and short response times of less than 1 min are realized. The sensor also shows good selectivity over some common pharmaceutical species and alkali and alkali-earth metal salts, and can be used for the direct assay of berberine in commercial tablets. The results are in correspondence with those obtained by the pharmacopoeia method. Received: 4 April 1997 / Revised: 8 August 1997 / Accepted: 12 August 1997