分子筛催化剂-亚硫酸盐体系降解水中对乙酰氨基苯酚

过渡金属诱导亚硫酸盐体系产生硫氧自由基是一种新型的高级氧化技术,比常规的高级氧化过程(基于羟基自由基等)有更优越的性能.我们对过渡金属离子活化过硫酸盐和亚硫酸盐的硫氧自由基生成链式反应过程、自由基用于氧化有机污染物的国内外研究现状进行了大致总结,并以SBA-15介孔分子筛为载体,采用浸渍法制备Co-SBA-15固相催化剂,将此固相催化剂用于活化亚硫酸钠,产生强氧化性自由基,以此来降解制药废水中典型污染物对乙酰氨基酚(APAP).通过正交试验,探讨了pH、温度、钴离子与亚硫酸根的比值(简称钴硫比)、气体含氧量等参数对污染物降解效果的影响.对催化剂进行表征,对体系中产生的自由基类型进行检测,结合实验结果和文献资料对降解产物进行了分析,探究了APAP的降解原理.     

氨法选择性还原氮氧化物 V2O5/TiO2-PILC催化剂的抗硫性能

选择性催化还原(SCR)是目前去除氮氧化物最有效的方法之一. V2O5/TiO2催化剂被广泛应用于氨法选择性还原氮氧化物(NH3-SCR)反应,但该催化剂存在工作温度高(300–400oC)及 SO2氧化率高引起设备腐蚀和管路堵塞等问题,开发低温 SCR催化剂具有重要意义.过渡金属氧化物(如 Fe2O3, MnOx和 CuO等)催化剂用于低温SCR先后见诸文献报道,但这些催化剂在 SO2和 H2O存在下易失活.近年来柱撑黏土(PILC)引起科学家广泛关注, Yang等首次将 V2O5/TiO2-PILC催化剂应用于 NH3-SCR反应,发现其催化活性高于传统 V2O5/TiO2催化剂.柱撑黏土基催化剂在 NH3-SCR反应中也显示出良好抗硫性能,但 V2O5/TiO2-PILC催化剂的抗硫机理至今尚未见深入研究.因此我们制备了一系列 V2O5/TiO2-PILC催化剂,采用原位漫反射红外等方法详细研究了其抗硫性能较好的原因.
　　首先采用离子交换法制备出 TiO2-PILC载体,之后采用浸渍法制备了不同钒含量(质量分数x/%=0,3,4,5)的xV2O5/TiO2-PILC催化剂.同时,制备了传统 V2O5/TiO2和 V2O5-MoO3/TiO2催化剂作为对比.活性评价结果显示,4V/TiO2-PILC催化剂具有最高的催化活性,其催化性能与传统钒钛催化剂相当.在160oC时, NO转化率可达80%以上.同时,4V/TiO2-PILC催化剂还具有较宽的反应温度窗口,在260–500oC范围内, NO转化率保持在90%以上.向反应体系中加入0.05% SO2和10% H2O后,在低温(160oC以下)时所有催化剂的反应活性都有一定提高,可能是由于 SO2的加入提高了催化剂的表面酸性.继续升高温度,4V/TiO2和4V6Mo/TiO2催化剂活性均明显下降,而4V/TiO2-PILC催化剂的活性则未出现明显下降.原位漫反射红外光谱结果显示, SO2在三种催化剂表面的吸附以表面硫酸盐或亚硫酸盐物种以及离子态 SO42–物种形式存在,而在4V/TiO2-PILC催化剂表面离子态 SO42–物种的量最少. X射线光电子能谱及 O2程序升温脱附结果显示,在4V/TiO2-PILC催化剂上,表面吸附氧(Oads)的量最少.综合上述分析可以得出,在 SO2气氛下,离子态 SO42–物种在 SCR催化剂表面的累积可能是导致其失活的主要原因,而离子态 SO42–物种的形成可能与催化剂表面吸附氧的量有关.     

苯酚抑制条件下亚硫酸盐氧化的本征反应动力学

亚硫酸盐的氧化是湿法烟气脱硫工艺中的重要过程. 利用间歇式反应装置, 研究了苯酚抑制条件下亚硫酸盐氧化的本征反应动力学. 结果表明, 该复杂的反应过程分两个阶段进行, 即富氧区的快速反应和贫氧区的慢速反应. 在富氧区, 苯酚、亚硫酸盐和溶解氧的分级数分别为－0.5, 1.0和2.0, 反应的表观活化能为99.2 kJ•mol－1; 在贫氧区, 苯酚、亚硫酸盐和溶解氧的分级数分别为－0.5, 1.5和0, 反应的表观活化能为 129.7 kJ•mol－1. 结合实验结果, 对苯酚抑制条件下亚硫酸盐氧化的宏观反应动力学过程进行了推断.     

湿法脱硫中亚硫酸盐非催化氧化本征动力学

亚硫酸盐的氧化是湿法烟气脱硫工艺中的重要过程. 利用间歇式反应装置, 研究了亚硫酸盐非催化氧化的本征反应动力学. 结果表明, 该反应分为两个阶段进行, 即富氧区的快速反应和贫氧区的慢速反应. 在富氧区, 亚硫酸盐和溶解氧的分级数分别为1.0和1.0, 反应的表观活化能为49.3 kJ•mol^－1; 在贫氧区, 亚硫酸盐和溶解氧的分级数分别为2.0和0, 反应的表观活化能为122.6 kJ•mol^－1. 对反应的机理进行了预测, 结果与实验现象有较好的吻合.     

多相条件下亚硫酸镁非催化氧化反应动力学及机理

副产物的氧化回收利用是影响镁法脱硫工艺发展的关键.本文通过真空旋转蒸发的方式制备了高纯度的亚硫酸镁样品,并利用鼓泡式反应装置,研究了亚硫酸镁非催化氧化的反应动力学,考察了pH、氧分压、亚硫酸镁浓度、气体流量、温度等因素对亚硫酸镁氧化反应速率的影响,得到了各反应物的分级数及表观活化能.结合三相反应过程的数学模型推断出亚硫酸镁氧化的本征反应在慢反应区进行,且氧的传质扩散是总反应的速率控制步骤.研究结果为氧化回收镁法脱硫副产物提供了理论依据.     

Ethanol production from spent sulfite liquor fortified by hydrolysis of pulp mill primary clarifier sludge

Applied Biochemistry and Biotechnology - Some low-yield sulfite pulping operations ferment spent sulfite liquor (SSL) to remove biochemical oxygen demand associated with dissolved sugars while at...     

SBA-15负载金属[Co(Ⅱ),Zn(Ⅱ)]酞菁催化剂的制备及其催化氧化性能

以1,8-二氮杂双环[5,4,0]十一碳烯-7为催化剂,4,5-二丁氧基邻苯二甲腈为原料,用液相法合成了两种金属酞菁配合物——β-八(丁氧基)酞菁钴(1)和β-八(丁氧基)酞菁锌(2),其结构经UV-Vis和IR表征。采用浸渍法将1和2分别负载到有序介孔分子筛SBA-15上制得SBA-15负载金属酞菁催化剂SBA1-15和SBA2-15。以0.1 mol.L-1亚硫酸钠的氧化反应为探针反应,研究了常温常压、氧气气氛下,SBA1-15和SBA2-15的催化氧化活性,并考察了SBA1-15的用量对其催化活性的影响及重复利用性。结果表明,两种催化剂均具有良好的催化性能,在用量相同时,SBA1-15的催化氧化性能优于SBA2-15;SBA1-15的质量为溶液质量的0.16‰时,催化活性最佳,且可以重复使用。     

一种酚类抑制剂对亚硫酸镁氧化反应动力学的影响及作用机理

亚硫酸镁的氧化是湿式镁法烟气脱硫过程中的重要步骤. 通过实验筛选出一种新型酚类抑制剂(T), 可显著延缓亚硫酸镁的氧化反应速率. 在接近实际工况条件下, 研究了抑制剂浓度、亚硫酸镁浓度、氧分压、pH、温度等条件对亚硫酸镁氧化速率的影响. 结果表明, 抑制剂T、溶解氧及亚硫酸镁的分级数分别为－0.25, 0.5和0, 反应的表观活化能为48.2 kJ•mol^－1. 结合建立的三相反应模型, 对T抑制条件下的总反应过程进行了推断, 认为亚硫酸镁氧化的本征化学反应在贫氧区进行, 而总反应速率受氧的传质扩散过程控制. 与非抑制条件下的结果相比, T的存在降低了本征反应速率, 进而使氧的传质速率减小. 研究结果为利用抑制氧化手段实现脱硫副产物回收提供了有益参考.     

The effect of sodium sulfite and cobalt chloride on the oxygen transfer coefficient

An experiment was conducted in an aeration system made from 2000 mL Erlenmeyer Flask to investigate the effect of sodium sulfite with cobalt chloride and the sparging nitrogen gas on the measurement of the oxygen transfer coefficient. Twice the theoretical quantity of sodium sulfite that is required to react with dissolved oxygen, or nitrogen sparging at a rate equivalent to that of air used during the aeration process, was used to deoxygenate the water. The results obtained from the study were consistent and repeatable and showed no significant differences in the values of the oxygen transfer coefficient obtained by the two methods.     

亚硫酸根离子在硅和二氧化硅的湿法腐蚀中的作用

运用光刻技术和原子力显微技术(AFM)研究了亚硫酸根离子对硅和二氧化硅在40％(w)氟化铵水溶液中腐蚀速率的影响.结果表明硅和二氧化硅的腐蚀速率和亚硫酸根离子浓度有关.高分辨X射线光电子能谱(XPS)分析在有/没有亚硫酸根的溶液中腐蚀后的硅和二氧化硅表面氟元素的结果表明在这两种溶液中腐蚀得到的表面化学成分是有差别的.实验结果证明亚硫酸根离子在硅和二氧化硅的湿腐蚀中不只是表现为一种除氧剂，还干预了表面腐蚀反应过程.     

Thermal behaviour and S-O bonding state of alkaline-earth metal sulfites

The thermal behaviours of magnesium sulfite, strontium sulfite and barium sulfite were investigated in the atmospheres of argon and air. the thermal behaviours of magnesium sulfite were different from those of the other two sulfites. The oxidation of magnesium sulfite in air does not occur.The bonding state of the SO ₃ ^2– in each sulfite was compared. The SO ₃ ^2– in magnesium sulfite was coordinated through the sulfur, while those in the other sulfites were coordinated through the oxygen.It appears that the difference in thermal behaviour between magnesium sulfite and the other sulfites depend upon the difference in bonding state of the SO ₃ ^2– We wish to thank Mr. K. Takahashi of MAC Science Inc. for TG and DTA measurements, mass spectra in Ar and his valuable discussions.     

Catalytic effect of some inorganic ligands on a ligand substitution reaction involving mercury(II) and its application as a differential kinetic method of analysis

To design a sensitive and selective kinetic method for determining a catalyst, the kinetics of the ligand substitution reaction between the mercury(II)-4-(2-pyridylazo)resorcinol complex and 1,2-cyclohexanediamine-N,N,N',N'-tetraacetic acid together with the catalytic effect of some inorganic ligands on this reaction were studied. The rate constant for a catalyzed reaction path was found to be linearly correlated with the electron donor constant of the catalyst. From this correlation, the difference in reactivity between sulfite or thiosulfate and sulfate was established. Under the selected conditions, sulfite up to 1.5 x 10(-6) M and thiosulfate up to 7 x 10(-7) M could be determined with detection limits of 3 x 10(-8) and 2 x 10(-8) M in the presence of 10 000 and 25 000-fold molar amounts of sulfate, respectively. The tolerance level in the determination of 1 x 10(-6) M of sulfite and 4 x 10(-7) M of thiosulfate was studied for 15 inorganic anions and 44 metal ions.     

Mo(Tm(Me))(O)2Cl]: an alternative functional model of sulfite oxidase

The hydrotris(methimazolyl)borate anion (TmMe) has been used to synthesize an alternative functional model ([Mo(TmMe)(O)2Cl]) of the metalloenzyme sulfite oxidase. It has been shown that the complex undergoes oxygen atom transfer chemistry and that it performs the primary function of the enzyme, sulfite oxidation. A method using ion chromatography has been developed to definitively prove that sulfite is oxidized to sulfate. Employment of a soft tripodal ligand has allowed us to tune the redox potentials of our complex so that they are significantly closer to those reported for sulfite oxidase.     

Sulfite induced autoxidation of NiII and CoII tetraglycine complexes. Spectrophotometric and rotating ring-disc voltammetric studies

The oxidation of Ni(II) and Co(II) tetraglycine complexes in borate buffer aqueous solution, by dissolved oxygen, is strongly accelerated by sulfite. The formation of Ni(III) and Co(III) complexes with maximum absorbances at 327 and 265 nm, respectively, was followed by spectrophotometric measurements. Ni(III) formation was also characterized by voltammetry at low temperatures, whose anodic and cathodic components were observed in the recorded voltammograms. Spectra and rotating ring-disc voltammograms, recorded at various rotation speed values, showed that the Ni(III) species decomposes. The electrochemical process related to the couple Co(II)/Co(III), in a medium containing tetraglycine, was not reversible. In both Ni(II) and Co(II) complexes the metal ion oxidation in the presence of oxygen and sulfite involves the reduction of some initial Ni(III) or Co(III) by sulfite to produce the SO(3).- radical, which rapidly reacts with dissolved oxygen to produce SO(5).-, which then oxidizes Ni(II) or Co(II).     

A fiber optic biosensor for sulfite analysis in food

The sulfite fiber optic biosensor developed herein is based on the enzymatic oxidation reaction of sulfite catalyzed by sulfite oxidase (SOD). The consumption of O(2) is measured with an O(2) fiber optic sensor which monitors the fluorescence quenching of the indicator, perylene, by molecular oxygen. Perylene is immobilized into a polymer matrix and attached to the end of a fiber bundle forming an O(2) sensor. The enzyme, sulfite oxidase is immobilized on a pre-activated membrane and mounted onto the O(2) sensor. Several analytical characteristics of this sulfite biosensor were investigated including dynamic range, reversibility, reproducibility, stability and selectivity. The sulfite contents of various food samples, e.g. dried fruits, potato flakes, lemon juice were determined and the results obtained were in good agreement with the standard AOAC method.     

Determination of Sulfite in Hair Waving Products Using Oxygen‐Incorporated Gold‐Modified Screen‐Printed Electrodes

An electrodeposition oxygen‐incorporated gold‐modified screen‐printed carbon electrode (AuOSPE) was fabricated to determine the sulfite content in hair waving products. The AuOSPE showed an electrocatalytic current for sulfite at +0.4 V (vs. Ag/AgCl). Compared with a gold screen‐printed electrode (AuSPE), the AuOSPE showed a higher electrocatalytic current. The increase in the electrocatalytic current was ascribed to the increase of the oxygen incorporated with gold atom on AuOSPE. The AuOSPE coupled with a flow injection analysis (FIA) system showed excellent oxidation current for sulfite in a 0.1 mol L^?1 phosphate buffer solution (PBS), pH 6.0. The linear working range for determining the sulfite content was 0.05 to 1200 mg L^?1 (0.625 µmol L^?1 to 15.00 mmol L^?1) with a calculated detection limit of 0.03 mg L^?1 (0.375 µmol L^?1) (DL, S/N=3). Relative standard deviations (RSD) of 3.03 %, 2.30 % and 4.26 % were calculated for consecutive injections (n=12) of 20, 300 and 900 mg L^?1 sulfite, respectively. The amount of sulfite in two hair waving products was determined by the proposed method and a standard iodometric method. The recoveries ranged from 96.18 % to 105.61 %. The AuOSPE showed high sensitivity, selectivity, stability and reproducibility for sulfite.     

亚硫酸盐协助中空Bi2WO6微球的光催化性能

本文利用亚硫酸盐与Bi2WO6协同作用,有效地提升其光催化活性。以甲基橙和抗生素环丙沙星(CIP)作为被降解物对该体系的光催化降解性能和机理进行了研究。结果表明:光催化活性增强主要原因为亚硫酸盐能与Bi2WO6的光生空穴及羟基自由基反应,不仅能生成新的活性物质亚硫酸自由基(SO3^2-),还能促进Bi2WO6光生电子—空穴对的分离。此外,还考察了催化剂的用量、和污染物的浓度对该体系光催化性能的影响。     

Electrocatalytic oxidation of sulfite by acetylferrocene at glassy carbon electrode

The electrochemical oxidation of sulfite catalyzed by acetylferrocene (AFc) at a glassy carbon electrode (GCE) in 0.2 M NaClO₄ aqueous solution has been studied by cyclic voltammetry. Although sulfite itself showed a sluggish electrochemical response at the GCE, the response could be enhanced greatly by using AFc as a mediator, which enables a sensitive determination of the substrate (sulfite). The reaction rate constant for catalytic oxidation was evaluated as (7.02 ± 0.05) × 10⁴ M ^?1 s^?1 by chronoamperometry. Experimental conditions that maximize the current efficiency of the electrocatalytic oxidation, such as the pH and both the catalyst (AFc) and substrate (sulfite) concentrations, were also investigated. The electrochemical kinetics of electrocatalytic oxidation of sulfite by AFc has been studied by cyclic voltammetry. In the presence of 5 × 10^?4 M AFc, the oxidation current is proportional to the sulfite concentration and the calibration plot was linear over the concentration range 2 × 10^?4–2.4 × 10^?3 M . This result can be applied in the determination of real samples. Copyright © 2005 John Wiley & Sons, Ltd.     

Direct determination of sulfite in food samples by a biosensor based on plant tissue homogenate

In the work described here, a biosensor was developed for the determination of sulfite in food. Malva vulgaris tissue homogenate containing sulfite oxidase enzyme was used as the biological material. M. vulgaris tissue homogenate was crosslinked with gelatin using glutaraldehyde and fixed on a pretreated Teflon membrane. Sulfite was enzymatically converted to sulfate in the presence of the dissolved oxygen, which was monitored amperometrically. Sulfite determination was carried out by standard curves, which were obtained by the measurement of consumed oxygen level related to sulfite concentration. Several operational parameters had been investigated: the amounts of plant tissue homogenate and gelatin, percentage of glutaraldehyde, optimum pH and temperature. Also, some characterization studies were done. There was linearity in the range between 0.2 and 1.8 mM at 35 °C and pH 7.5. The results of real sample analysis obtained with the biosensor agreed well with the enzymatic reference method using spectrophotometric detection.     

Determination of Sulfite in Real Sample by an Electrochemical Sensor Based on Ni/Poly(4-Aminobenzoic Acid)/Sodium Dodecylsulfate/Carbon Paste Electrode

In this research, a modified electrode has been produced during the electropolymerization of 4-Aminobenzoic acid in the presence of sodium dodecylsulfate (SDS) and then Ni(II) ions were incorporated to the polymer by immersion of the modified electrode in a 0.1 M Ni(II) ions solution. The electrochemical behavior of Ni/poly(4-aminobenzoic acid)/sodium dodecylsulfate/carbon paste electrode (Ni/poly(4-AB)/SDS/CPE) was investigated by using cyclic voltammetry. The experimental results exhibited the stable redox behavior of the Ni(III)/Ni(II) couple immobilized at the polymeric electrode. This polymeric modified electrode has a very good activity toward the sulfite electrooxidation in a phosphate buffer solution (pH 11). By comparison of the different responses to sulfite oxidation using electrodes Ni/poly(4-AB)/SDS/CPE, poly(4-AB)/SDS/CPE and CPE, we observed that the former electrode is a more effective catalyst for the electrooxidation of sulfite. Under optimal experimental conditions, the peak current response increased linearly with sulfite concentration over the range of 0.1–1 and 1–10 mM. The detection limit of the method was 0.063 mM. Finally, the method was applied to the determination of sulfite in weak liquor sample.