基于光纤气泡和纤芯失配的Mach-Zehnder干涉液体折射率传感器

介绍了一种基于光纤气泡和纤芯失配的Mach-Zehnder干涉液体折射率传感器. 将两根纤芯经过腐蚀的普通单模光纤熔接在一起, 在熔接点处形成一个气泡, 在距气泡20 mm处级联一段20 mm的细芯光纤, 再接入一段单模光纤, 形成单模光纤-气泡-单模光纤-细芯光纤-单模光纤结构的传感器. 气泡与光纤芯径失配处的两个节点起到光纤耦合器的作用, 从而形成光纤Mach-Zehnder干涉仪. 环境液体折射率的变化,将使得传感器透射谱能量发生变化, 通过测量干涉谱波峰峰值能量从而实现对折射率的测量. 并对所制作传感器的折射率响应特性进行了实验研究, 实验结果表明干涉谱波峰峰值能量与环境液体折射率之间存在良好的线性关系, 当环境液体折射率变化范围在1.351–1.402时, 响应灵敏度为143.537 dB/RIU, 线性度0.996. 该传感器在生物化学领域有较好的应用前景. 关键词： 光纤气泡 纤芯失配 Mach-Zehnder干涉仪 折射率传感     

基于纤芯失配型马赫曾德尔光纤折射率和温度同时测量传感器的研究

设计和制作了一种基于单模多模细芯单模光纤马赫曾德尔(Mach-Zehnder)干涉仪结构,可同时测量折射率和温度的传感器。该传感器中,多模光纤和细芯单模熔接点充当光耦合器。导入光纤中传输的光经多模光纤后在细芯光纤的纤芯和包层中激发出纤芯模和包层模,不同模式光在细芯光纤中传输时将产生光程差,再经细芯单模熔接点耦合成为导出光纤的纤芯模而干涉。传感器透射光谱随着环境折射率和温度的变化发生漂移,通过监测不同级次的干涉谷可实现折射率和温度的同时测量。通过对传感器的透射光谱进行傅里叶变换分析可知该透射光谱主要由LP01模和LP16模干涉形成。该传感器透射光谱中1535nm附近干涉谷的折射率和温度响应灵敏度的理论值分别为-55.90nm/RIU和0.0501nm/℃(其中RIU为折射率单位);1545nm附近干涉谷的折射率和温度响应灵敏度的理论值分别为-56.26nm/RIU和0.0505nm/℃。在折射率和温度的变化范围分别为1.3449~1.3972和20℃~90℃的环境中对传感器的响应特性进行实验研究,结果表明:透射光谱中1535nm附近干涉谷的折射率和温度响应灵敏度分别为-53.03nm/RIU和0.0465nm/℃;1545nm附近干涉谷的折射率和温度响应灵敏度分别为-54.24nm/RIU和0.0542nm/℃。理论分析与实验结果相一致。该传感器在生物医学领域有较好的应用前景。     

同时测量温度和曲率的光纤传感器

提出了一种基于光纤布拉格光栅和马赫-曾德干涉仪相结合的同时测量曲率和温度的光纤传感器.该光纤传感器在马赫-曾德干涉仪中熔接一段布拉格光纤光栅,其中马赫-曾德干涉仪由两个花生形结构单模光纤熔接而成.实验结果表明,马赫-曾德干涉仪的透射谱中干涉峰和光纤布拉格光栅透射谱中谐振峰对曲率和温度有不同的响应灵敏度,因此可以利用矩阵实现对曲率和温度的同时测量.实验中测得马赫-曾德干涉仪曲率灵敏度为-27.58nm/m-1,光纤布拉格光栅在一定的测量范围内对曲率的变化不敏感,马赫-曾德干涉仪和光纤布拉格光栅的温度灵敏度分别为0.038 69nm/℃和0.012 17nm/℃.该系统采用全光纤结构,光纤布拉格光栅嵌入到马赫-曾德干涉仪中,因而结构紧凑和简单,且易于实现.     

基于无芯光纤的多参数测量传感器

设计并制作了一种基于单模-无芯-单模-无芯-单模光纤结构的马赫-曾德尔传感器,可用来同时测量折射率和温度.该传感器中,两处无芯光纤充当输入、输出耦合器,中间单模光纤作为传感臂.利用有限元仿真和理论分析,确定耦合器和传感臂的最优长度为15 mm.在无芯光纤中激发出的高阶模进入单模光纤的包层传输,由于倏逝场的作用,受到环境折射率和温度的影响.选取透射谱不同干涉级次的波谷作为研究对象,实现了折射率和温度的同步测量.实验结果表明:1545 nm附近干涉谷的折射率和温度灵敏度分别为–153.89 nm/RIU(refractive index unit)和0.166 nm/℃;1570 nm附近干涉谷的折射率和温度灵敏度分别为–202.74 nm/RIU和0.183 nm/℃.该传感器在实现折射率和温度同步测量的同时,仍能保持较高灵敏度,在生物医疗等方面有着较好的应用前景.     

纤芯失配熔接的高灵敏度光纤折射率传感器

提出并实验验证了一种基于马赫泽德干涉仪(MZI)的高灵敏度光纤折射率(RI)传感器。传感头由一段单模光纤(SMF)夹熔在两段较短的细芯光纤(TCF)中组成TCF SMF-TCF结构,其总长度为9 mm。由于光纤纤芯失配导致的纤芯模和包层模发生干涉,干涉谱对传感头外部折射率的响应极其敏感。使用该传感器检测具有不同折射率的甘油水溶液,实验结果显示:传感器干涉谱的共振波长随环境折射率的增大向长波方向漂移,其折射率灵敏度在1.33 RIU～1.38 RIU范围内约为159 nm/RIU。该传感器具有结构简单、易于制造、成本较低、灵敏度高、抗电磁干扰能力强等优点,在生物化学与环境监测等领域具有较大的应用潜力。     

基于多芯光纤级联布喇格光纤光栅的横向压力与温度同时测量

提出并制作了一种基于多芯光纤与单模光纤错位构成的马赫-曾德尔干涉仪,将其与光纤布喇格光栅级联,形成的全光纤传感系统可实现横向压力和温度双参量同时测量.马赫-曾德尔干涉仪是利用多芯光纤和单模光纤的模场不匹配而发生模间干涉,当外界横向压力直接作用在多芯光纤内部光场,干涉仪具有较高的灵敏度.实验结果表明:马赫-曾德尔干涉仪压力灵敏度为28.57nm/(N·mm~(-1)),线性度为0.997,而光纤布喇格光栅在一定范围内对压力变化不敏感;马赫-曾德干涉仪和光纤布喇格光栅对温度变化都具有较高的线性度,温度灵敏度分别为56.1pm/℃和11.3pm/℃.对于分辨率为0.02nm的光谱仪,传感器可实现的压力和温度测量分辨率分别为7.0×10~(-4)N/mm和0.03℃.马赫-曾德尔干涉仪的透射谱和光纤布拉光栅的谐振峰对横向压力和温度的变化有不同的光谱响应,利用光谱仪对传感器的透射谱实时监测,方便地实现了压力与温度双参量的测量.该传感器结构简单,灵敏度高,可用于不同领域的压力传感.     

光纤锥在线型马赫-曾德干涉仪的折射率传感特性

提出了一种基于光纤锥的在线型光纤马赫-曾德干涉仪式折射率传感器.传感器是在一根单模光纤上使用光纤熔接机拉制出两个光纤锥,光纤锥的直径为43.7μm,长度为480μm.干涉仪中光纤锥充当光纤耦合器,激发出光纤高阶模,并将高阶模耦合进单模光纤使之与纤芯基模形成模间干涉.被环境溶液的折射率、温度的变化改变模式间相位差,将导致干涉仪的传输光谱发生漂移,从而实现传感测量.实验结果表明:当环境溶液的折射率变化范围为1.335~1.403RIU时,传感器的折射率灵敏度为-128.233nm/RIU;当水溶液的温度变化范围为30~75℃时,传感器的温度灵敏度为0.111nm/℃.该传感器具有制作方法简单、灵敏度高、成本低等特点,可应用于生物传感测量.     

基于光纤锥级联结构的湿度传感器

提出了一种基于普通单模光纤粗锥级联结构的马赫-曾德尔干涉湿度传感器.将两根单模光纤对芯熔融成一个粗锥,并依次级联,形成光纤锥-单模光纤-光纤锥-单模光纤-光纤锥结构.外界环境湿度、温度的改变使传感器的纤芯基模和包层模的光程差发生改变,引起传感器干涉光谱发生变化.通过监测干涉谱波长和能量的变化实现对外界物理量的测量.实验结果表明,当空气中湿度在35~95%RH范围内变化时,传感器的湿度灵敏度为-0.065dB/%RH,线性度为0.997;当温度在30~80℃范围内变化时传感器的温度灵敏度为69.4pm/℃,线性度为0.998.该传感器可以避免温湿度的交叉影响,实现单参量的同时在线区分测量.     

双S型光纤结构的传感特性

在剥除涂覆层的单模光纤上熔成两个间距为25mm的S型结构,构成双S型全光纤马赫-曾德干涉仪.入射光经过第一个S型结构时部分光被激发到包层,经过第二个S型结构时重新进入纤芯传播,S型结构中光纤的纤芯模和包层模耦合产生干涉.利用干涉光谱测量外界因素的响应并用于温度、折射率和微位移的测量.实验结果表明,温度、折射率和微位移的灵敏度分别为69pm/℃,132.64nm/RIU,-178pm/μm,且具有很好的线性度.该传感结构为全光纤结构,制作简单,易于实现且成本低.     

锥形三包层石英特种光纤折射率与温度传感器

提出了一种锥形三包层石英特种光纤(TTCQSF)的折射率与温度传感器。它是通过对2根单模光纤(SMF)之间熔接的三包层石英特种光纤(TCQSF)熔融拉锥得到的SMF-TTCQSF-SMF级联结构,形成了光纤马赫-曾德尔干涉仪(MZI)。由于TTCQSF纤芯模和包层模之间的光程差会随着外界环境的变化而改变,从而引起传感器干涉谱的变化,因此可以通过检测传感光谱的变化实现对外界物理量的测量。分别对该传感器进行折射率和温度传感实验,实验结果表明,当溶液折射率在1.3350~1.3466范围、温度在25.7℃~94.9℃范围内时,随着折射率和温度的增加,传感器的传输光谱分别出现红移和蓝移现象,其折射率灵敏度和温度灵敏度分别为1673.94 nm/RIU和-0.061 nm/℃,且均具有很好的线性度,其中RIU为单位折射率。该传感器制作简单、灵敏度高,在生物化学、工业生产的折射率和温度测量场合具有较好的应用前景。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.