结合多尺度空间滤波和层级网络的基于结构保持的高光谱特征选择

为了充分利用高光谱图像蕴含的丰富的光谱信息和空间信息,提出了结合多尺度空间滤波和层级网络的基于结构保持的高光谱特征选择算法.算法利用基于l2,1范数的数学模型,选出同时保存全局相似性结构和局部流形结构的特征子集;在多个尺度的窗口中使用双边滤波,自适应计算滤波核,自动在光谱数据中融入空间信息,增强了类内相似性和类间相异性,避免了参量选择;引入层级结构实现空间信息和光谱信息的深入融合,提高了分类准确度;讨论了层级数目和窗口尺度个数对分类准确度的影响.在Indian Pines和PaviaU两个数据集的实验表明,该算法在大部分地物种类上的分类准确度都有较大幅度的提升,总体分类准确度分别达到90.98%和94.20%,相比其他方法明显提高了地物分类准确度.     

一种光谱与纹理特征加权的高分辨率遥感纹理分割算法

高分辨率遥感影像呈现极其丰富的光谱和结构信息,传统的基于光谱的遥感影像分割方法往往使得分割区域过于细碎且分割精度不高.尝试将纹理信息引入到特征空间以期解决该问题.本文算法中,特征空间由光谱和纹理两类构成,并采用加权最小距离分类器.光谱信息通过对原始影像的变带宽均值漂移滤波获得,纹理信息由对原始影像逐波段采用多尺度伽博(Gabor)滤波器组滤波获得;依据训练样区中各特征维的方差确定该地物类别分类时特征维的权重,并通过训练样区的特征加权平均获得各地物类别的聚类中心;最后,将像素点归为到加权聚类中心距离最小的类别.实验结果表明,提出的均值漂移带宽确定方法是有效的,加权融合算法较基于光谱的分割方法在分割精度上有一定程度的提高.     

空间信息自适应融合的高光谱图像分类方法

针对单一的滤波器提取高光谱图像空间纹理信息时不能获得完整的图像特征的不足,提出一种结合双边滤波和域转换标准卷积滤波的高光谱图像分类算法.该方法采用空间信息自适应融合的分类寻优,先对高光谱波段进行抽样分组,再用双边滤波和域转换标准卷积滤波对分组后的波段进行滤波,两种空间信息进行线性融合后交由支持向量机完成分类.实验表明,相比使用光谱信息、高光谱降维、空谱结合的支持向量机分类方法和边缘保持滤波以及递归滤波的方法,本文所提算法对高光谱图像的分类精度有较大提高,在训练样本仅为5%和3%的情况下,对印第安农林和帕维亚大学图像的总体分类精度分别达到了96.95%和97.89%,比其他算法高出213个百分点,验证了该方法在高光谱图像分类的有效性.     

基于形态学空间特征的高光谱遥感图像分类方法

传统的高光谱图像分类主要是基于像素的光谱特征,在一定程度上忽略了高光谱遥感图像中像素之间的空间相关性。为了充分利用高光谱图像中的空间信息,提出了一种基于加权多结构元素无偏差形态学的空间特征提取方法,并基于形态学的多尺度特征和结构保持性提出了基于邻域的多尺度空间特征提取方法,得到了高光谱遥感图像的空间特征。对k-NN分类算法进行改进,提出了基于变精度粗糙集和重构误差的k-NN分类算法,实现了基于空间特征的高光谱遥感图像分类。在两个不同的高光谱遥感图像的实验验证了基于空间特征和改进k-NN分类算法的性能。     

基于半监督稀疏多流形嵌入的高光谱影像分类

提出了一种半监督稀疏多流形嵌入方法,并应用于高光谱影像分类.该方法充分利用少量标记和大量无标记样本,采用稀疏表示方法得到样本的稀疏系数,并选取来自同一流形的点作为近邻点,然后构建相似图来表征多流形结构,得到样本在每个流形上低维鉴别特征,增加来自同一流形的数据点聚集性,进而提升分类性能.本文方法在PaviaU和Salinas两个高光谱数据集上的总体分类准确度分别达到84.91%和89.74%,相较于其他方法明显提高了地物分类性能.     

基于纹理特征和形态学特征融合的高光谱影像分类法

针对传统融合空间和光谱特征方法仅使用单一空间特征,并未充分利用其双高分辨率的特点,提出了一种基于纹理特征和形态学特征融合的高光谱影像分类方法.首先利用传统主成份分析变换降低高光谱影像的维数,消除空间相关性,然后对每一主成分采用灰度共生矩阵提取纹理特征,获得扩展纹理特征,最后结合形态学特征和部分光谱特征进行高光谱影像的分类.实验证明,本文提出的方法能更好地克服传统光谱特征分类的局限性,提高高光谱影像的分类准确度.     

基于监督稀疏流形嵌入的高光谱遥感影像分类

稀疏流形聚类和嵌入算法通过仿射空间中的稀疏表示获得稀疏系数,并能由稀疏系数自适应地选取来自同一流形的数据点.但稀疏流形聚类和嵌入算法没有直接的投影矩阵,且为非监督学习方法.针对稀疏流形聚类和嵌入算法算法的不足,提出一种新的监督稀疏流形嵌入算法.该方法首先在仿射空间中采用稀疏优化法得到稀疏系数,然后根据稀疏系数构建相似权值,并在权值中嵌入样本类别信息,增加同类数据间的聚集性,并在低维嵌入空间中保持这种相似性不变,提取鉴别特征来提升分类性能.实验结果表明:该文方法不仅能保持数据的稀疏特性,而且通过利用样本数据的类别信息使同类数据在低维空间尽可能聚集,提取鉴别特征,进而改善高光谱影像的地物分类效果.     

高光谱图像降维的判别流形学习方法

本文提出了一种高光谱图像降维的判别流形学习方法.针对获取的大量遥感对地观测数据存在大量冗余信息的特点,引入改进的流形学习方法对高光谱遥感数据进行降维处理,以提高遥感图像自动分类的总体准确度.该方法充分利用遥感图像自动分类中训练样本的判别信息,将输入样本的类别信息加入到常规流形学习方法的框架中,从本质上提高输出的特征在低维空间中的判别力.同时,引入线性化模型以解决流形学习方法中常见的小样本问题.对高光谱遥感图像自动分类的实验表明,基于判别流形学习的高光谱遥感图像自动分类方法能够显著地提高图像分类准确度.     

基于稀疏表示模型和自回归模型的高光谱分类

针对高光谱分类中对光谱信息和空间信息利用不足的问题,提出了一种基于稀疏表示模型和自回归模型相结合的分类算法。该算法利用稀疏表示模型和自回归模型,设计联合字典:在光谱维上,利用稀疏表示模型将高光谱的每个光谱向量表示为字典中训练样本的稀疏线性组合;在空间维上,利用自回归模型对每个光谱向量的8邻域进行约束。针对不同样本分别构造一个字典,在减少计算量的同时减小重构误差,最后在最小重构误差和邻域相关性的约束下求解稀疏表示问题,以最小重构误差为准则实现高光谱数据的分类。仿真结果表明,该方法能够有效地提高高光谱数据的分类精度。     

面向高光谱图像分类的空谱半监督局部判别分析

针对传统的基于特征提取的高光谱图像分类算法大多只考虑光谱信息而忽略空间信息的问题,提出了一种基于空谱半监督局部判别分析(S3 ELD)和空谱最近邻(SSNN)分类器的高光谱图像分类算法。该算法结合高光谱图像的空间一致性,在利用标记样本的判别信息保持数据集可分性的基础上,定义空间近邻像元散度矩阵来保存像元的空间近邻结构,提出基于空谱距离的相似性度量并将其应用于局部流形结构的发现和SSNN的构建。S3 ELD算法不仅能揭示数据集的局部几何关系,而且增强了光谱域同类像元和空间域近邻像元在低维嵌入空间的聚集性。结合SSNN进行分类,进一步提升了分类精度。利用PaviaU和Salinas数据集进行的实验结果表明,S3 ELD算法的总体分类精度分别达到了92.51%和96.29%;与现有几种算法相比,该算法能更有效地提取出判别特征信息,并达到更高的分类精度。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.