Highly Soluble Porphyrin (TPP)-Perylene Diimide (PDI) Dyad and Triad:Synthesis and Spectroscopic Studies

Novel porphyrin‐perylene diimide dyad (TPP‐PDI) and porphyrin‐perylene diimide‐porphyrin triad (TPP‐PDI‐TPP) were synthesized and characterized. Their structure and properties were studied by UV, FL, ¹H NMR, MS, elemental analysis, etc. The variation of fluorescence feature and UV spectra of TPP‐PDI‐TPP triad were investigated at different concentration of CF₃COOH in THF. The incorporation of CF₃COOH leads to the closure of the efficient charge transfer decay. After protonation of porphyrin units, the fluorescence intensity of TPP‐PDI‐TPP triad increased greatly. The fluorescence intensity of TPP‐PDI‐TPP triad restored after addition of triethylamine into the solution. Thus, TPP‐PDI‐TPP triad was a proton‐type fluorescence switch based on acid‐base control. Moreover, different from porphyrin‐perylene type molecular switches reported before, this TPP‐PDI‐TPP triad has wonderful solubility in organic solvents.     

高度可溶聚苝酰亚胺材料的合成及性能研究

聚酰亚胺是一类具有优异综合性能的聚合物材料 [1,2 ] .近年来 ,合成含荧光染料的可溶性聚酰亚胺材料在聚合物化学领域引起了广泛兴趣 [3～ 11] ,人们期望这类聚合物材料会比其小分子材料具有更加优越的性能 .小分子酰亚胺荧光染料具有极高的荧光量子效率、光化学和热稳定性 ,可广泛应用于光学开关[12 ] 、电致发光器件 [13,14 ] 和太阳能转换器 [15] 等领域 ,但是由于的大π键平面共轭结构 ,使得材料的溶解性能极差 ,难以加工 .最近 ,本实验室通过合成含叔丁基的芳香二胺 [4,4′-亚甲基双 ( 2 -叔丁基苯胺 ) ]与各种芳香四酸二酐反应…     

可溶性苝四羧酸二酰亚胺发光材料的合成及表征

以苝四酸酐为原料合成了1,7-二溴-3,4,9,10-苝四酸酐(PeryBr₂)、N,N′-二(十二烷基)-1,7-二溴-3,4,9,10-苝四羧酸二酰亚胺(DD-PeryBr₂)和N,N′-二(十二烷基)-1,7-二对叔丁基苯氧基-3,4,9,10-苝四羧酸二酰亚胺(DD-PeryBp₂) 3种苝四羧酸二酰亚胺类化合物,并对其结构和性能利用紫外-可见吸收光谱、傅立叶红外光谱、核磁共振、质谱、热分析和荧光光谱测试技术进行了表征和测试。 结果表明,DD-PeryBp₂能很好的溶于甲苯、氯仿、四氢呋喃等常用有机溶剂。 紫外可见最大吸收波长和荧光最大发射波长分别为548和576 nm。 DD-PeryBp₂具有很好的热稳定性,质量损失5%时的温度为433 ℃。     

Octahydroxypyridine[4]arene self-assembles spontaneously to form hexameric capsules and dimeric aggregates

In recent years it has been observed that resorcin[4]arenes and pyrogallol[4]arenes form hydrogen-bonded hexameric capsules in nonpolar solvents. In the present study we have used NMR spectroscopy, with an emphasis on diffusion NMR, to investigate the self-assembly and the aggregation mode of solutions of octahydroxypyridine[4]arene (1 b) in chloroform. In spectroscopic studies, the hexameric capsule of C-undecylresorcin[4]arene (2 b) was used as a reference compound and in some cases also as an internal reference. The current diffusion NMR spectroscopy study shows, in contrast to a previous report, that compound 1 b self-assembles spontaneously into hexameric and dimeric aggregates in solutions in chloroform. The (1)H NMR and diffusion NMR spectroscopic studies on a solution of 1 b in CHCl(3) show the presence of new upfield-shifted peaks, which diffuse with the same diffusion coefficient as the hexameric peaks in the spectrum. Therefore, these new upfield-shifted peaks were attributed to encapsulated CHCl(3) molecules. Interestingly, diffusion NMR measurements showed that the addition of trifluoroacetic acid (6.7 equiv), which had no effect on the hexameric capsules of 2 b, led to the disassembly of the hexamer and the dimer of 1 b into its monomers. Therefore, we conclude that compound 1 b self-assembles spontaneously into hexameric capsules in nonpolar organic solvents, as do resorcin[4]arenes 2 b and 2 c and pyrogallol[4]arenes 3 a and 3 b.     

Hydrogen-bonded oligo(p-phenylenevinylene) functionalized with perylene bisimide: self-assembly and energy transfer

We describe the synthesis, supramolecular ordering on surfaces and in solution, and photophysical characterization of OPV4UT-PERY, an oligo(p-phenylenevinylene) (OPV) with a covalently attached perylene bisimide moiety. In chloroform, the molecule forms dimers through quadruple hydrogen bonding of the ureido-s-triazine array. This is supported by scanning tunneling microscopy (STM) studies, which reveal dimer formation at the liquid (1,2,4-trichlorobenzene)/solid (graphite) interface. Moreover, contrast reversal in bias-dependent STM imaging provides information on the ordering and different electronic properties of the oligo(p-phenylenevinylene) and perylene bisimide moieties. In dodecane, the molecule self-assembles into H-type aggregates that are still soluble as a result of the hydrophobic shell formed by the dodecyloxy wedges. The donor-acceptor molecule is characterized by efficient energy transfer from the photoexcited OPV to the perylene bisimide. Mixed assemblies with analogous OPVs lacking the perylene bisimide unit have been prepared in dodecane solution and energy transfer to the incorporated perylene bisimides has been studied by fluorescence spectroscopy.     

Solvent and temperature effects on the conformational equilibria of a dihydrobenzo[h]quinolinium fluoroborate

Spectra of the N‐phenyl‐5,6‐dihydro‐2,4‐diphenylbenzo[h]quinolinium tetrafluoroborate (1) and of the N‐phenyl‐5,6,8,9‐tetrahydro‐7‐phenyldibenzo[c,h]acridinium tetrafluoroborate (2) were recorded in various solvents and temperatures. The analysis of the ¹H‐NMR spectra of the tetrafluoroborate salt 1, recorded in acetone, acetonitrile, 1,1,2,2‐tetrachloroethane and chloroform, revealed the existence of an equilibrium between two conformers in solution. Tight ion‐pairing in chloroform led to a smaller barrier for interconversion between the two conformers. In more polar solvents, where the dihydrobenzoquinolinium exists as a free cation, theoretical calculations predicted larger barriers. The spectra of 1 in 1,1,2,2‐tetrachloroethane also varied with temperature, resembling at higher temperatures the spectrum in CDCl₃ and at 300K spectra in more polar media. Spectra of 2 did not vary with the solvent or the temperature, in an indication of a much higher barrier to conformational interconversion, because of a greater steric hindrance between the N‐phenyl substituent and the dihydrobenzo rings. Copyright © 2009 John Wiley & Sons, Ltd.     

芴基Cardo型聚亚胺酮的分子结构拟、合成及性能

以9,9-双-(3-R-4-氨基苯基)芴(R=H,CH3,F)和1,4-双-(4′-溴苯酰基)苯为单体,通过BuchwaldHartwig交叉偶联反应,缩聚合成了芴基Cardo型聚亚胺酮(PIKF).利用MS软件对其分子结构进行模拟,并通过1H NMR和FTIR等方法进行表征,结果与目标产物吻合.利用凝胶渗透色谱(GP...     

Scanning tunneling microscopy and spectroscopy of donor-acceptor-donor triads at the liquid/solid interface.

By means of scanning tunneling microscopy (STM), the self-assembly of two organic donor-acceptor-donor triads (donor=oligo(p-phenylene vinylene) (OPV); acceptor=perylene diimide (PDI)) and their mixtures has been investigated at the liquid/solid interface. Both triads differ in the nature of the substituents and, therefore, in the redox properties of the central perylene diimide unit (H or Cl). Thanks to the submolecular resolution, the distinct electronic properties of the units, within a triad and between the two triads, are reflected by the relative STM contrast in the bias-dependent imaging experiments. Moreover, scanning tunneling spectroscopy reveals an inverse rectifying behavior of the OPV and H-substituted PDI units, which is discussed in the framework of quasi-resonant tunneling. A striking difference is observed for the Cl-substituted triad.     

Aggregation Processes of Perylene Bisimide Diimidazolium Salts

The supramolecular aggregation of three diimidazolium‐functionalized perylene bisimides, differing in the alkyl chain length was investigated. These salts form aggregates in solvents like chloroform, dichloromethane, and glycerol. Solvent‐, concentration‐, and temperature‐dependent spectroscopic studies were carried out, evidencing the occurrence of an isodesmic, enthalpy‐driven aggregation process, underpinned by π–π stacking and hydrogen bonding. Moreover, dynamic light scattering (DLS) measurements and SEM images revealed that these salts aggregate in chloroform into elongated structures.     

Effect of the Bulkiness of the End Functional Amide Groups on the Optical,Gelation, and Morphological Properties of Oligo(p‐phenylenevinylene) π‐Gelators

Herein, we describe the role of end functional groups in the self‐assembly of amide‐functionalized oligo(p‐phenylenevinylene) (OPV) gelators with different end‐groups. The interplay between hydrogen‐bonding and π‐stacking interactions was controlled by the bulkiness of the end functional groups, thereby resulting in aggregates of different types, which led to the gelation of a wide range of solvents. The variable‐temperature UV/Vis absorption and fluorescence spectroscopic features of gelators with small end‐groups revealed the formation of 1D H‐type aggregates in CHCl₃. However, under fast cooling in toluene, 1D H‐type aggregates were formed, whereas slow cooling resulted in 2D H‐type aggregates. OPV amide with bulky dendritic end‐group formed hydrogen‐bonded random aggregates in toluene and a morphology transition from vesicles into fibrous aggregates was observed in THF. Interestingly, the presence of bulky end‐group enhanced fluorescence in the xerogel state and aggregation in polar solvents. The difference between the aggregation properties of OPV amides with small and bulky end‐groups allowed the preparation of self‐assembled structures with distinct morphological and optical features.     

The effects of overall composition and monomer sequence distribution on the infrared carbonyl stretching frequencies of ethylene–vinylacetate and styrene–vinylacetate copolymers

The vinyl acetate centered triad fractions of some free radically prepared ethylene–vinyl acetate and styrene–vinyl acetate copolymers have been determined from the patterns of vinyl acetate methine carbon peaks in their ¹³C nuclear magnetic resonance (NMR) spectra. The positions and shapes of the carbonyl bands in the infrared (IR) absorption spectra of the copolymers recorded in chloroform are shown to depend on the compositions of the copolymers and on the proportions of the various vinyl acetate centered triads. Infrared absorption measurements may thus be used in part to characterize the monomer sequence distributions of these copolymers.     

Synthesis and self‐organization properties of copolyurethanes based on perylenediimide and naphthalenediimide units

A series of perylene and naphthalene diimide‐containing random copolyurethanes with different ratios of perylene/naphthalene diimide content was synthesized and characterized. Copolymerization improved the solubility of these rigid aromatic diimides, and the copolymers were soluble in common organic solvents like chloroform, tetrahydrofuran, and so forth. The absorption spectra of perylene‐based copolymers showed a red‐shifted peak at a wavelength of 557 nm corresponding to J‐type aggregates. For naphthalene copolymers, the quenching of fluorescence at higher naphthalene incorporation suggested the presence of aggregates because of the extensive π‐π stacking of the aromatic core. FTIR spectroscopic analysis showed that the hydrogen bonding tendency of the polymer decreased with increase in perylene/naphthalene incorporation. The fluorescence spectra of the perylene polymers were exactly a mirror image of the absorption spectra. The fluorescence spectra of the naphthalene polymers at higher naphthalene incorporation showed a red‐shifted excimer like emission peak, which was assigned as static excimers based on their excitation spectra. These polymers could exhibit two types of secondary interaction modes, namely, hydrogen bonding (via urethane linkage) and π‐stacking (via aromatic perylene or naphthalene units) thus highlighting the importance of polymer design in inducing self‐organization at both low and high incorporation of the rigid bisimide moieties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1224–1235, 2009     

300 MHz 1H-NMR study of poly(propylene sulfide)

An ¹H 300-MHz NMR spectroscopic study of deuterated poly(propylene sulfide) shows that methylene protons are sensitive to triad effects. It was possible to distinguish i, h_i, s, and h_s triads. Experimental values found for different polymers are in good agreement with theoretical amounts obtained from statistical probability calculation. The methyl groups are also slightly stereosensitive. By using optically active deuterated monomers with different R/S ratios it was possible to confirm the assignment of peaks and the tacticity. Nondeuterated polymers give very complicated spectra, and only the highly stereoregular polymer could be analyzed through its ABCX₃ spin system.     

Synthesis and characterization of highly soluble fluorescent main chain copolyimides containing perylene units

A series of high molecular weight copolyimides containing various amount of perylene units in the main chain have been synthesized. The polymers were characterized by FT-IR, NMR, UV/Vis, fluorescence spectroscopy, gel permeation chromatography, differential scanning calorimetry and thermogravimetric analysis measurements. They are highly soluble in conventional solvents such as CHCl₃, THF, cyclohexanone etc. and form optically transparent films by solution casting or spin coating. The incorporation of various amount of perylene units in the main chain allows the control of the fluorescence intensity in solution and in solid thin films. The copolyimide containing 0.28 mol% perylene units exhibits the highest solid-state fluorescence. The observed fluorescence intensities of the copolyimides in solid state film decreased with the increasing amount of perylene units in the main chain when the mole ratio of perylene units greater than 0.28 mol% indicating the aggregation of chromophores. The copolyimides are thermally stable up to 400 °C and exhibit glass transition temperatures in the range of 340-360 °C. The number average molecule weight ranges from 1.72×10⁴ to 1.25×10⁵ and the molecule weight distribution mediated between 1.9 and 2.4.     

Solvent effects in the preparation of molecularly imprinted polymers for melatonin using N-propionyl-5-methoxytryptamine as the pseudo template

To clarify the role of diluents in the preparation of molecularly imprinted polymers utilizing only hydrogen bonding, we investigated the effects of diluents by using different solvents. Melatonin (N-acetyl-5-methoxytryptamine), an amide bond and indole ring-containing hormone was chosen as the target molecule. N-Propionyl-5-methoxytryptamine was used as the pseudo template, methacrylic acid as the functional monomer, and solvents were used as diluents. Interactions between the template, the functional monomer, melatonin, and the solvents, were observed by ¹H NMR spectroscopy. The polymers were evaluated by high-performance liquid chromatography. The results suggest the hydrogen bonding-acceptor capacity of the solvent is the most important factor in the preparation of molecularly imprinted polymers for hydrogen bonding-donating molecules. Hydrogen bonding between the template, the functional monomer, and solvent can be estimated from the chemical shifts in ¹H NMR spectra of those molecules in the solvent.     

Synthesis,molecular conformation,vibrational, electronic transition,and chemical shift assignments of 4-(thiophene-3-ylmethoxy)phthalonitrile: a combined experimental and theoretical analysis

This work presents the synthesis and characterization of a novel compound, 4-(thiophene-3-ylmethoxy)phthalonitrile (TMP). The spectroscopic properties of the compound were examined by FT-IR, FT-Raman, NMR, and UV techniques. FT-IR and FT-Raman spectra in solid state were observed in the region 4000–400 cm⁻¹ and 3500–50 cm⁻¹, respectively. The ¹H and ¹³C NMR spectra were recorded in CDCl₃ solution. The UV absorption spectrum of the compound that dissolved in THF was recorded in the range of 200–800 nm. The structural and spectroscopic data of the molecule in the ground state were calculated using density functional theory (DFT) employing B3LYP exchange correlation and the 6-311++G(d,p) basis set. The vibrational wavenumbers were calculated and scaled values were compared with experimental FT-IR and FT-Raman spectra. The complete assignments were performed on the basis of the experimental results and total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. Isotropic chemical shifts (¹³C NMR and ¹H NMR) were calculated using the gauge-invariant atomic orbital (GIAO) method. A study on the electronic properties, such as HOMO and LUMO energies, were performed by time-dependent DFT (TD-DFT) approach. The HOMO and LUMO analyses have been used to elucidate information regarding charge transfer within the molecule. Comparison of the calculated frequencies, NMR chemical shifts, absorption wavelengths with the experimental values revealed that DFT method produces good results.     

Obtaining the structure and bond rotational potential of a substituted ethane by NMR spectroscopy of solutions in nematic liquid-crystalline solvents

Partially averaged dipolar couplings (also referred to as residual dipolar couplings) D(ij) can be obtained from the analysis of the NMR spectra of molecules dissolved in liquid-crystalline solvents. Their values for a nonrigid molecule depend upon the bond lengths and angles, the rotational potentials, and the orientational order of the molecules. The molecule studied, 1-chloro-2-bromoethane, is one of the simplest example of a substituted alkane in which the rotational potential has three minimum-energy positions, trans and gauche+/-conformations, and the present investigation explores the problems inherent in deriving the form of the potential and the molecular geometry from the set of partially averaged couplings between the protons, and between protons and (13)C nuclei. The geometrical parameters and the rotational potential obtained are compared with the results from a density-functional theory method.     

NMR studies of polymer solutions. II. Polyethylene

The intramolecular structure of polyethylene in solution was studied by a high-resolution nuclear magnetic resonance technique. Highly purified n-alkanes (99.5%) from C₅H₁₂ to C₃₆H₇₄ were used as its oligomers. The NMR spectra of the polyethylenes (oligomers) are very sensitive to the solvents used. The internal methylene protons of all polyethylenes of various chain length resonance at an identical frequency in carbon tetrachloride. A sharp transition in the NMR spectrum of polyethylene in α-chloronaphthalene at 35°C. was observed at n-C₁₇H₃₆, above which there exist two distinguishable NMR peaks for internal methylene protons, and below which (fewer carbons) only a single peak was seen. The NMR spectra of the internal methylene protons of the polyethylenes (oligomers) taken in benzene are very similar to those taken in pyridine. They are not as easily resolved as those NMR spectra taken in α-chloronaphthalene solutions. The effect of the size of the aromatic solvent molecule on the NMR spectra of the internal methylene protons of the polyethylenes (oligomers) in solutions was demonstrated by using aromatic solvents of various sizes, such as chlorobenzene, α-chloronaphthalene, and 9-chloronathracene. The results indicate that the formation of polymeric structure of the internal methylene groups in the polyethylene chain is very sensitive to the size of the solvent used. The interaction of the solvent with the methylene groups of the polyethylenes varies as a function of chain length; it is stronger for those low member n-alkanes and decreases gradually to an asymptotic value.     

Synthesis, optical properties, and LFER analysis of solvent-dependent binding constants of Hamilton-receptor-connected merocyanine chromophores

A merocyanine dye equipped with a Hamilton-receptor unit has been synthesized that enables strong noncovalent binding of other merocyanine dyes bearing barbituric acid acceptor groups by six hydrogen bonds. NMR and UV/vis titration experiments in toluene, chloroform, dichloromethane, dioxane, and THF provide evidence for the formation of 1:1 complexes even in the dipolar solvents. An enhanced binding strength is observed for the more dipolar merocyanine dyes in the head-to-tail assembly structure with binding constants up to >10 (8) M (-1) in toluene. In the present bimolecular complexes two merocyanine chromophores are assembled in a head-to-tail fashion that affords increased dipole moments as demanded for efficient electric field induced poling processes in nonlinear optical and photorefractive polymeric hosts. The solvent dependency of the binding constants for various barbituric acid dye-Hamilton receptor complexes as well as a perylene imide-melamine complex reveals linear free energy relationships (LFER) that allow for an estimation of binding constants larger than 10 (12) M (-1) for Hamilton receptor organized head-to-tail merocyanine bimolecular complexes in aliphatic solvents. It is suggested that such LFER are valuable tools for the estimation of binding constants in solvents where experimental binding constants cannot be determined because of solubility or spectroscopic problems.     

[60]富勒烯与1, 1'-联茚的Diels-Alder加成物的合成与结构表征

通过Diels-Alder环加成反应,发现可控制反应条件,使1,1'-联茚与C60反应,并高产率地得到具有新颖结构的单加成物。用HPLC,FT-IR,FD-MS及^1HNMR,^13CNMR,HMQC,HMBC等多种波谱技术对其结构进行表征,测得它的两个sp^3杂化的桥头碳的化学位移为σC:70.91,证明生成的衍生物为[6,6]闭式环加成。^13CNMR谱共给出38个信号,表明C601,1'-联茚衍生物分子具有Cs对称性;此外,还发现单加成衍生物C601,1'-联茚热稳定性好,在四氢呋喃、丙酮等极性溶剂中溶解性好,很适合于在LB膜及光限幅性能方面的研究。