Tetrathiafulvalene-acetylene scaffolding: new pi-electron systems for advanced materials

Novel extended tetrathiafulvalenes (TTFs) with hexa-2,4-diyne-1,6-diylidene spacers between the two 1,3-dithiole rings and laterally appended alkynyl moieties for one- and two-dimensional scaffolding were synthesised and investigated for their electronic properties.     

A new route to extended tetrathiafulvalenes from α-acetyl ketene-S,S-acetals

A new route to extended tetrathiafulvalenes was described. The extended TTFs with hexa-2,4-diyne-1,6-diylidene spacer between the two 1,3-dithiole rings were prepared simply from the easily available α-acetyl ketene-(S,S)-acetals in good yields under mild conditions.     

Synthesis and characterization of cruciform-conjugated molecules based on tetrathiafulvalene

Stepwise acetylenic scaffolding provides cruciform-conjugated molecules with vertically disposed pi-systems, one being an extended tetrathiafulvene (TTF) unit. Two synthetic routes for a cruciform dimer incorporating a total of two extended TTFs was developed, employing either an oxidative Hay coupling reaction as the final dimerization step or as one of the initial steps. Both routes take advantage of ready access to new mono- and diethynylbenzene building blocks incorporating a variety of other functionalitites. The redox and optical properties of the cruciform molecules were investigated by cyclic and differential pulse voltammetries and UV-vis absorption spectroscopy. The access to multiple redox states renders the molecules attractive candidates as wires, or possibly transistors, for molecular electronics. Generation of a quinoid structure by oxidation is supported by density functional theory calculations.     

Synthesis and reactivity of silylated tetrathiafulvalenes

Novel organosilylated tetrathiafulvalenes (TTFs) possessing Si-H or Si-Si bonds have been synthesised. The crystal structures of several derivatives have been determined by X-ray diffraction, including that of dimeric (Si(2)Me(4))(TTF)(2) () incorporating a diatomic SiMe(2)-SiMe(2) linker. Cyclic voltammetry measurements in all cases show two oxidation waves. DFT calculations were performed to rationalize the absence of an electronic communication between the two TTF moieties of through the disilanyl spacer. The reactivity of the Si-H bond has been exploited to prepare the dinuclear complex [{Ru(CO)(4)}(2){mu-(Me(2)Si)(4)TTF}] (), starting from Ru(3)(CO)(12) and TTF(SiMe(2)H)(4) (). Treatment of with 2 equiv. of PPh(3) or dppm results in selective substitution of a CO ligand trans to a SiMe(2) group to afford mer-[{Ru(PPh(3))(CO)(3)}(2){mu-(Me(2)Si)(4)TTF}] () and mer-[{Ru(CO)(3)}(2)(eta(1)-dppm){mu-(Me(2)Si)(4)TTF}] (). Attempts to transform the Si-H bonds of some TTF(SiMe(2)H)(n) (n = 1, 2) into Si-O functions using stoichiometric amounts of water in the presence of tris(dibenzylideneacetone)dipalladium(0) were unsuccessful. Quantitative cleavage of the C(TTF)-Si bond was observed instead of formation of TTF-based-siloxanes. Essays of catalytic bis-silylation of phenylacetylene with and TTF(SiMe(2)-SiMe(3)) () in the presence of Pd(OAc)(2)/1,1,3,3-tetramethylbutylisocyanide failed. Again, cleavage of the C(TTF)-Si bond was noticed.     

Salts of extended tetrathiafulvalene analogues: relationships between molecular structure, electrochemical properties and solid state organisation

By considering the structures of many salts derived from extended TTF analogues, relationships between the molecular architecture of the donors with their electrochemical properties and their stacking mode in the salts are presented in this critical review. Three categories of donors corresponding to their extension modes have been considered. Firstly, for linearly extended TTFs the crucial role of the spacer in modifying the electrochemical properties and the packing mode in the salts is presented. Secondly, bidimentional extension of the donors obtained by linking several dithiafulvenyl units on a TTF core led to materials with increased dimensionality. Finally, the last class corresponds to the fusion, directly or across a benzene ring, of TTF frameworks. The former are the base of many salts with metallic behaviour. (148 references.).     

Molecular and Crystal Structure Diversity,and Physical Properties of Tetrathiafulvalene Derivatives Substituted with Various Aryl Groups through Sulfur Bridges

A library of tetrathiafulvalene (TTF) derivatives ( TTF‐1 – TTF‐47 ) bearing aryl groups attached through sulfur bridges has been created. The peripheral aryl groups exert a significant influence on both the electronic and crystallographic properties of the resulting TTFs. These TTFs display broad absorption bands at 400–500 nm caused by intramolecular charge‐transfer transitions between the aryl groups and central TTF core, and their first redox potentials increase with increasing electron‐withdrawing ability of the aryl groups. In their crystal structures (22 examples), the central TTF cores adopt various conformations, including chair, half‐chair, boat, and planar conformations. Moreover, the peripheral aryl groups exhibit multiple alignment modes with respect to the central TTF core, caused by their rotation about the two C? S bonds of the sulfur bridges. The packing motifs of these TTFs depend on both the nature of the aryl groups and their spatial alignment modes. Driven by intermolecular van der Waals forces and π–π interactions between the aryl groups and between the aryl groups and the TTF core, these TTFs adopt various packing structures. As a typical example, TTF‐14 , an achiral molecule, adopts a helical chain stack through intermolecular atomic close contacts. Moreover, the molecular geometries and packing motifs of these TTFs are sensitive to environmental variation, as exemplified by TTF‐28 , which adopts three distinct crystal modifications with diverse molecular geometries and stacking modes under different crystallization conditions. This work indicates that these TTFs are potential candidates as electronic materials, as well as functional building blocks for supramolecular assembly.     

Synthesis,Structure, Optical,and Electrochemical Properties of Triple‐ and Quadruple‐Decker Co‐facial Tetrathiafulvalene Arrays

Understanding the details of the electronic structure in face‐to‐face arranged tetrathiafulvalenes (TTFs) is very important for the design of supramolecular functional materials and superior conductive organic materials. This article is a comprehensive study of the interactions among columnar stacked TTFs using trimeric (trimer) and tetrameric (tetramer) TTFs linked by alkylenedithio groups (‐S(CH₂)_nS‐, n=1–4) as models of triple‐ and quadruple‐decker TTF arrays. Single‐crystal X‐ray analyses of neutral trimeric TTFs revealed that the three TTF moieties are oriented in a zigzag arrangement. Cyclic voltammetry measurements (CV) reveal that the trimer and tetramer exhibited diverse reversible redox processes with multi‐electron transfers, depending on the length of the ‐S(CH₂)_nS‐ units and substituents. The electronic spectra of the radical cations, prepared by electrochemical oxidation, showed charge resonance (CR) bands in the NIR/IR region (1630–1850 nm), attributed to a mixed valence (MV) state of the triple‐ and quadruple‐decker TTF arrays. In the trimeric systems, the dicationic state (+2; 0.66 cation per TTF unit) was found to be a stable state, whereas the monocationic state (+1) was not observed in the electronic spectra. In the tetrameric system, substituent‐dependent redox processes were observed. Moreover, π‐trimers and π‐tetramers, which show a significant Davydov blueshift in the spectra, are formed in the tricationic (trimer) and tetracationic (tetramer) state. In addition, these attractive interactions are strongly dependent on the length of the linkage unit.     

Decorating Tetrathiafulvalene (TTF) with Fluorinated Phenyls through Sulfur Bridges: Facile Synthesis,Properties, and Aggregation through Fluorine Interactions

Tetrathiafulvalene derivatives ( TTF1 – TTF9 ) bearing fluorinated phenyl groups attached through the sulfur bridges have been synthesized by employing a copper‐mediated C–S coupling reaction of C₆H_5?xF_xI (x=1, 2, 5) and a zinc‐thiolate complex, (TBA)₂[Zn(DMIT)₂] (TBA=tetrabutyl ammonium, DMIT=1,3‐dithiole‐2‐thione‐4,5‐dithiolate), as the key step. Particularly, the selective synthesis of C₆F₅‐substituted ( TTF8 ) and C₆F₄‐fused ( TTF9 ) TTFs from C₆F₅I is disclosed. The physicochemical properties and crystal structures of these TTFs are fully investigated by UV/Vis absorption spectra, cyclic voltammetry, molecular orbital calculation, and single‐crystal X‐ray diffraction. The exchange of hydrogen versus fluorine on the peripheral phenyl groups show a notable influence on both the electronic and crystallographic natures of the resulting TTFs: 1) lowering both the HOMO and the LUMO energy levels, 2) modulating the electrochemical properties by regioselective and/or the degree of fluorination, 3) enhancing the driving forces of stacking by multiple fluorine interactions (F???S, C?F???π/π_F, C?F???F?C, and C?F???H). This work indicates that the decoration with fluorinated phenyls holds promise to produce functional TTFs with novel electronic and aggregation features.     

Donor/Acceptor fulleropyrrolidine triads

New C(60)-based triads, constituted by a fulleropyrrolidine moiety and two different electroactive units [donor 1-donor 2 (10, 15a,b), or donor 1-acceptor (17, 21)], have been synthesized by 1,3-dipolar cycloaddition reaction of azomethyne ylides to C(60) and further acylation reaction on the pyrrolidine nitrogen. The electrochemical study reveals some electronic interaction between the redox-active chromophores. Triads bearing tetrathiafulvalene (TTF) and ferrocene (Fc) (10) or pi-extended TTFs and Fc (15a,b) show reduction potentials for the C(60) moiety which are cathodically shifted in comparison to the parent C(60). In contrast, triads endowed with Fc and anthraquinone (AQ) (17) or Fc and tetracyanoanthraquinodimethane (TCAQ) (21) present reduction potentials for the C(60) moiety similar to C(60). Fluorescence experiments and time-resolved transient absorption spectroscopy reveal intramolecular electron transfer (ET) processes from the stronger electron donor (i.e., TTF or extended TTF) to the fullerene singlet excited state, rather than from the poorer ferrocene donor in 10, 15a,b. No evidence for a subsequent ET from ferrocene to TTF(*)(+) or pi-extended TTF(*)(+) was observed.     

Electron-rich tetrathiafulvalene-triarylamine conjugates: synthesis and redox properties

By combining tetrathiafulvalenes (TTFs) and triarylamines, four TTF-triarylamine conjugates bridged by an annulated pyrrole ring were designed and synthesized by an N-arylation reaction. Electrochemical and photophysical investigations suggest that these novel conjugates possess very strong electron-donating ability with very high HOMO energy levels of around -4.70 eV; the HOMOs are mainly located on the TTF moiety. We observed significant electronic coupling between the TTF moieties and the triarylamine groups. However, no evidence for such electronic communication between end-capping TTF units (conjugates 5 and 7) or between two terminal triarylamine groups (conjugate 9) could be found. Differential scanning calorimetry (DSC) measurements together with PM3-optimized geometries suggest that conjugates 5 and 7, which adopt three-dimensional propeller-shaped structures, may easily pack and crystallize in the solid state because of the large rigid planar blades consisting of TTF and one of the phenyl rings of the triarylamine moiety. However, conjugate 9, with two bulky end-capping triarylamine groups, forms an amorphous material with a glass transition at 74.5 degrees C.     

Tetrathiafulvalene-functionalized triptycenes: synthetic protocols and elucidation of intramolecular Coulomb repulsions in the oxidized species

A large selection of triptycenes functionalized with tetrathiafulvalene (TTF) units as well as triptycenes containing extended TTFs as a part of the triptycene core have been synthesized utilizing new triptycene di- and tetraaldehydes as well as bis-, tetrakis- and hexakis(bromomethyl) derivatives. The largest scaffold contains a total of 12 TTFs around the central triptycene core. From spectroelectrochemical and chemical oxidation studies, we have elucidated the extent to which an increasing number of electrostatic interactions among oxidized TTF units exert an influence on the absorption characteristics.     

Design and Synthesis of Aviram–Ratner‐Type Dyads and Rectification Studies in Langmuir–Blodgett (LB) Films

The design and synthesis of Aviram–Ratner‐type molecular rectifiers, featuring an anilino‐substituted extended tetracyanoquinodimethane (exTCNQ) acceptor, covalently linked by the σ‐spacer bicyclo[2.2.2]octane (BCO) to a tetrathiafulvalene (TTF) donor moiety, are described. The rigid BCO spacer keeps the TTF donor and exTCNQ acceptor moieties apart, as demonstrated by X‐ray analysis. The photophysical properties of the TTF‐BCO‐exTCNQ dyads were investigated by UV/Vis and EPR spectroscopy, electrochemical studies, and theoretical calculations. Langmuir–Blodgett films were prepared and used in the fabrication and electrical studies of junction devices. One dyad showed the asymmetric current–voltage (I–V) curve characteristic for rectification, unlike control compounds containing the TTF unit but not the exTCNQ moiety or comprising the exTCNQ acceptor moiety but lacking the donor TTF part, which both gave symmetric I–V curves. The direction of the observed rectification indicated that the preferred electron current flows from the exTCNQ acceptor to the TTF donor.     

Building up 1‐D, 2‐D,and 3‐D Polyiodide Frameworks by Finely Tuning the Size of Aryls on Ar‐S‐TTF in the Charge‐Transfer (CT) Complexes of Ar‐S‐TTFs and Iodine

The arylthio‐substituted tetrathiafulvalenes (Ar‐S‐TTFs) are electron donors having three reversible states, neutral, cation radical, and dication. The charge‐transfer (CT) between Ar‐S‐TTFs ( TTF1 — TTF3 ) and iodine (I₂) is reported herein. TTF1 — TTF3 show the CT with I₂ in the CH₂Cl₂ solution, but they are not completely converted into cation radical state. In CT complexes of TTF1 — TTF3 with I₂, the charged states of Ar‐S‐TTFs are distinct from those in solution. TTF1 is at cation radical state, and TTF2 — TTF3 are oxidized to dication. The iodine components in complexes show various structures including 1‐D chain of V‐shaped (I₅)^–, and 2‐D and 3‐D iodine networks composed of I₂ and (I₃)^–.     

硫原子桥联芳基取代/稠合四硫富瓦烯

近年来,四硫富瓦烯(Tetrathiafulvalene,TTF)衍生物的设计合成、超分子组装、组装材料的物理性能研究及其在有机电子器件中的应用引起了人们广泛的研究兴趣。在本文中,我们简略综述硫原子桥联芳基取代/稠合四硫富瓦烯衍生物(Ar-S-TTF)的最新研究进展,包括其高效合成、电化学及光学性能研究、分子的结构特征/空间堆积方式,以及此类分子与球形原子簇(富勒烯、杂多酸)之间的超分子组装及组装材料的性能。     

Isolation and characterization of four isomers of a C(60) bisadduct with a TTF derivative. Study of their radical ions.

A family of triads composed of C(60) attached by a rigid spacer to two identical TTF moieties has been synthesized, and some of the isomers have been isolated and characterized by UV-vis spectroscopy, LDI-TOF-MS, and HMBC NMR spectroscopy. AM1 semiempirical calculations of the dipolar moments and the heats of formation of the different isomers have been carried out in order to verify their assignments. Oxidation and reduction of the triads affords the derived radical ion systems, TTF(+*)-C(60)-TTF(+*) and TTF-C(60)(-*)-TTF, which were studied by EPR spectroscopy. Spin density distributions of these radical cations and radical anions show that the unpaired electron is located mainly on the TTF and fullerene moieties, respectively. However, while the EPR signals obtained from the radical cations are very similar for all the isomers, the structured signals observed for the radical anions arising from the coupling of the unpaired electron with the hydrogen atoms of the methylene bridges in the spacer show that there is a strong influence of the isomerism on the spin distribution. Importantly, the theoretical calculations of the spin density distributions of the radical anions fit well with the experimental EPR results.     

Tetrathiafulvalene Belts with Large Cavities

The latest member of the cyclophane family, the macrotricyclic tetrathiafulvalene (TTF) “belt”, is now available. A general synthetic strategy for the construction of tetraconnected belt-type TTFs (shown schematically) has been developed, made possible by the use of a TTF with two different protecting groups. In the solid-state structure of one of the three TTF-belts prepared two chloroform molecules reside inside the spacious cavity.     

Synthesis and properties of conjugated hybrid tetrathiafulvalene dimers

The synthesis of new hybrid tetrathiafulvalene (TTF) dimers (11a-c) has been carried out by a Wittig-Horner reaction of the respective phosphonate esters (10a-c) with 2-(tetrathiafulvalenylvinyl)-9, 10-anthraquinone (9) prepared by olefination of formyltetrathiafulvalene (7) and the phosphonium salt of anthraquinone 8. Electrochemical studies show that the dimers 11a-c mainly retain the electrochemical properties of both TTF and the pi-extended TTF components, and most importantly, intramolecular electronic interactions between the two moieties are observed by cyclic voltammetry and Osteryoung square wave voltammetry. Semiempirical PM3 calculations reveal an almost planar geometry for the TTF and the benzene ring connected through the vinyl spacer. These compounds can form stable charge-transfer complexes with 2, 3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) showing a stoichiometry of 1:3 (D:A). Attempts to electrocrystallize the dimeric donors with different counteranions are discussed.     

Synthesis and Properties of Bis(2,5-dimethylpyrrolo[3,4-d])tetrathiafulvalenes, a Class of Annelated Tetrathiafulvalene Derivatives with Excellent Electron Donor Properties

The synthesis of the first derivatives of bis(pyrrolo[3,4-d])tetrathiafulvalene has been studied in detail. Starting from the readily available 2,5-dimethylpyrrole (11) and N-phenyl-2,5-dimethylpyrrole, bis(2,5-dimethylpyrrolo[3,4-d])tetrathiafulvalene (8) and the N,N'-disubstituted derivatives 6, 7, 9, and 10 were prepared in good yields by practical procedures. In contrast to the other types of aromatic annelated tetrathiafulvalenes (TTFs), which have appreciably higher oxidation potentials than TTF, the redox behavior of the pyrrolo tetrathiafulvalenes (TTFs) is very close to that of TTF itself. The potential of pyrrolotetrathiafulvalenes as a new series of organic metal building blocks is shown by the two-probe conductivities of the tetracyanoquinodimethane (TCNQ) complexes of the N-phenyl compound 7 and the N-methyl compound 9, which give higher values than TTF-TCNQ under similar conditions.     

Construction of Extended and Polymeric 1,3-Dithiolane and Tetrathiafulvalene Derivatives using Cycloaddition of Bun 3PßCS2

Abstract

Cycloaddition of the adduct between Buⁿ ₃P and CS₂ to strained double bonds such as in norbornene gives novel zwitterionic products such as 5. The compound 5 reacts with acetylenic dipolarophiles by cycloaddition accompanied by loss of Buⁿ ₃P to give dihydro-TTF derivatives. The corresponding reaction also occurs for norbornadiene and by using this a range of new extended sulfur-rich structures and substituted TTFs have been obtained.     

Bis(dithiomethyl-tetrathiafulvalene) with two phenyl-phosphino bridges

The single crystal X-ray structure of the precursor dithiomethyl-tetrathiafulvalene (MeS)₂TTF is reported, together with theoretical calculations at DFT level, which afforded two energy minima corresponding to cis and trans orientations of the thiomethyl substituents. The bis(tetrathiafulvalene) reaction of this TTF derivative followed by the reaction with phenyldichlorophosphine provides a new rigid bis(tetrathiafulvalene [TTF]) containing a 1,4-dihydro-1,4-diphosphinine ring between the two redox active units. Its solid-state structure, determined by single crystal X-ray diffraction analysis, shows the coexistence of both cis and trans isomers. Cyclic voltammetry measurements are in accordance with the existence of a communication between the two TTFs, as illustrated by the splitting of the oxidation waves.