Numerical modeling of vortex/shock wave interaction and its transformation by localized energy deposition

Three-dimensional unsteady Euler simulations are presented for the interaction of a streamwise vortex with an oblique shock of angle β = 23.3° at Mach 3 and 5. The flowfield features are analyzed for weak, moderate and strong interaction regimes. The details of the free recirculation zone at conditions of subsonic and supersonic flow on the vortex axis are considered. The vortex breakdown under conditions of a subsonic vortex core is characterized by a continuous growth and gradual degeneration of the region, unlike the supersonic core condition wherein a steady recirculation zone is achieved. The possibility of using a localized steady and pulsed periodic energy deposition on the vortex axis for stimulating the breakdown is demonstrated for various interaction regimes. It is shown that the formation of a subsonic wake downstream of an energy source lying on the vortex axis contributes to a more significant growth of the dimensions of the recirculation zone compared to the case when the vortex core remains supersonic. The possibility of achieving the effects similar to the steady case is demonstrated by the effect of a pulsed periodic energy source on the flow under consideration for corresponding equivalence parameters.      

3D numerical simulation of compressible swirling flow induced by means of tangential inlets

The objective of the present work is to predict compressible swirl flow in the nozzle of air‐jet spinning using the realizable k–ε turbulence model and discuss the effect of the nozzle pressure. The periodic change of flow patterns can be observed. The recirculation zone near the wall of the injectors upstream increases in size and moves gradually upstream, whereas the vortex breakdown in the injector downstream shifts slowly towards the nozzle outlet during the whole period. A low axial velocity in the core region moves gradually away from the centerline, and the magnitude of the center reverse flow and the area occupied by it increase with axial distance due to the vortex breakdown. From the tangential velocity profile, there is a very small free‐vortex zone. With increasing nozzle pressure, the velocity increases and the location of vortex breakdown is moved slightly downward. However, the increase in the velocity tends to decline at nozzle pressure up to a high level. Copyright © 2008 John Wiley & Sons, Ltd.     

The shock–vortex interaction patterns affected by vortex flow regime and vortex models

We have used a third-order essentially non-oscillatory method to obtain numerical shadowgraphs for investigation of shock–vortex interaction patterns. To search different interaction patterns, we have tested two vortex models (the composite vortex model and the Taylor vortex model) and as many as 47 parametric data sets. By shock–vortex interaction, the impinging shock is deformed to a S-shape with leading and lagging parts of the shock. The vortex flow is locally accelerated by the leading shock and locally decelerated by the lagging shock, having a severely elongated vortex core with two vertices. When the leading shock escapes the vortex, implosion effect creates a high pressure in the vertex area where the flow had been most expanded. This compressed region spreads in time with two frontal waves, an induced expansion wave and an induced compression wave. They are subsonic waves when the shock–vortex interaction is weak but become supersonic waves for strong interactions. Under a intermediate interaction, however, an induced shock wave is first developed where flow speed is supersonic but is dissipated where the incoming flow is subsonic. We have identified three different interaction patterns that depend on the vortex flow regime characterized by the shock–vortex interaction.      

Numerical modelling of confined flow past a cylinder of square cross-section at various orientations

Results are presented for the unsteady, two-dimensional flow and heat transfer due to a square obstruction of diameter d located asymmetrically between the parallel sliding walls of a channel with length-to-height ratio W/H = 6·44. Analysis is based on the numerical solution of spatially and temporally second-order accurate finite difference approximations of the transport equations expressed in curvilinear co-ordinates. Laminar, constant property flow is assumed for obstruction configurations in which the blockage ratio is d/H = 0·192, the nearest-wall distances are g/d = 0·2, 0·5 and 1, the orientation angles are α=0°, 10° and 20° and the Reynolds numbers are Re=100, 500, and 1000. Preparatory testing of the numerical procedure was performed for a variety of documented flows to verify its physiconumerical accuracy and obtain estimates of the residual grid-dependent uncertainties in the variables calculated. Heat transfer, drag and lift coefficients and Strouhal numbers for the present flow were finally calculated to within 4%–7% of their grid-dependent values using non-uniformly spaced grids consisting of (x=99, y=55) nodes. Above a critical value of the Reynolds number, which depends on the geometrical parameters, the flow is characterized by alternate vortex shedding from the obstruction top and bottom surfaces. Streamline, vorticity and particle streakline plots provide qualitative impressions of the unsteady vortical flow. Especially noteworthy are the extremes in the lift coefficient which ranges from large positive values for an obstruction with g/d=0·2 and α=10° to negative values for one with g/d=0·5 and α=0°. Both the drag and lift coefficients as well as the Strouhal number exhibit non-monotonic variations with respect to the parameters explored. Asymmetries in the obstruction location and orientation account for relatively large vortex-induced periodic variations in heat transfer, especially along the wall nearest the obstruction. Notable differences are also predicted for the heat transfer coefficients of the individual obstruction surfaces as a function of the orientation angle.     

Some Observations of Vortex Breakdown in a Confined Flow with Solid Body Rotation

The occurrence of breakdown in slender vortex flows as a ``bubble'' or ``spiral'' pattern depends on the degree of radial deflection of the vortex core from its original axis as shown in [1]. A smooth transition from a bubble to a spiral-type ``mode'' can be forced by inducing a small asymmetric disturbance which led to the conclusion, that the patterns do not represent different fundamental modes of breakdown. The subject presented herein addresses the following question: how does breakdown evolve in a swirling flow in which the vortex core is forced on a straight axis? In addition, what is the effect of turbulent inflow conditions? This type of vortex conditions is achieved in a spinning tube flow. The swirl is introduced at the entrance of the rotating tube with a honeycomb package and maintained by the viscous action in the boundary layer of the spinning tube. A diffuser at the end induces an adverse pressure gradient to force the breakdown. Flow visualization experiments are carried out to characterize the nature of breakdown over a range of different flow conditions. For some selected characteristic stages, detailed velocity fields were obtained using the method of Digital Particle-Image-Velocimetry (DPIV). The results show, that for the range of parameters investigated, breakdown is initiated at Rossby-numbers below a critical value of Ro ≈ 0.6 similar to those observed in other experiments. The bursted part of the vortex has a near axi-symmetric slender conical shape containing approximately stagnant flow. Its downstream end is characterized by a jump-like contraction where the flow evolves into a jet with enhanced swirl on the axis. It is only in this region downstream of the jump-like contraction that asymmetric instabilities and wavy flow patterns could be observed. Perturbations caused by them travel upstream but do not change the near-axisymmetric shape of the bursted part of the vortex.     

Flow structures and force characteristics for flat plate in oscillatory flows withKc number from 2 to 40 and in combined flows

The evolution of wake structures and variation of the forces on a flat plate in harmonic oscillatory and in-line combined flows are obtained numerically by improved discrete vortex method. For the oscillatory oncoming flow cases, wyenKc number varies from 2 to 40, the vortex pattern changes from a “harmonic wave” shaped (in a range of smallKc number) to a slight inclined “harmonic wave” shaped (in a range of moderateKc numbers), then to inclined vortex clusters with an angle of 50° to the oncoming flow direction (atKc=20), at last, asKc number becomes large, the vortex pattern is like a normal Karman vortex street. The well predicted drag and inertia force coefficients are obtained, which are more close to the results of Keulegan & Carpenter's experiment as compared with previous vortex simulation by other authors. The existence of minimum point of inertia force coefficientC _m nearKc=20 is also well predicted and this phenomenon can be interpreted according to the vortex structure. For steady-oscillatory in-line combined flow cases, the vortex modes behave like a vortex street, exhibit a “longitudinal wave” structure, and a vortex cluster shape corresponding to the ratios ofU _m toU ₀ which are ofO (10⁻¹)O(1) andO(10), respectively. The effect on the prediction of forces on the flat plate from the disturbance component in a combined flow has been demonstrated qualitatively. In addition to this, the lock in phenomenon of vortex shedding has been checked. The project supported by National Natural Science Foundation of China & LNM, Institute of Mechanics, CAS     

Study on the Fuel Air Mixing Induced by a Shock Wave Propagating into a H2-Air Interface

2nd-order upwind TVD scheme was used to solve the laminar, fully Navier-Stokes equations. The numerical simulations were done on the propagation of a shock wave with Ma _S = 2 and 4 into a hydrogen and air mixture in a duct and a duct with a rearward step. The results indicate that a swirling vortex may be generated in the lopsided interface behind the moving shock. Meanwhile, the complex shock system is also formed in this shear flow region. A large swirling vortex is produced and the fuel mixing can be enhanced by a shock wave at low Mach number. But in a duct with a rearward step, the shock almost disappears in hydrogen for Ma _S = 2. The shock in hydrogen will become strong if Ma _S is large. Similar to the condition of a shock moving in a duct full of hydrogen and air, a large vortex can be formed in the shear flow region. The large swirling vortex even gets through the reflected shock and impacts on the lower wall. Then, the distribution of hydrogen behind the rearward step is divided into two regions. The transition from regular reflection to Mach reflection was observed as well in case Ma _S = 4.     

Investigations of wake flows of a flat plate in steady,oscillatory and combined flows

Numerical study on near wake flows of a flat plate in three kinds of oncoming flows is made by using the discrete vortex model and improved vorticity creation method. For steady oncoming flow, both gross and detailed features of the wake flow are calculated and discussed. Then, in harmonic oscillatory oncoming flow two different wake flow patterns withK _c=2,4 and 10 are obtained respectively. Our results present a new wake flow pattern for lowKc numbers (Kc<5) describing vortex shedding, pairing and moving in a period of the oscillatory flow starting from rest. The calculated drag and inertia force coefficients are closer to experimental data from the U-tube than the previous results of vortex simulation. For in-line combined oncoming flow the vortex lock-in and dynamic characteristics are simulated. The results are shown to be in good agreement with experiments. The project supported by National Natural Science Fundation of China and LNM of Institute of Mechanics. CAS     

Interaction of a Streamwise Vortex with an Oblique Shock Wave

Interaction of a supersonic streamwise vortex with an oblique shock wave is considered. A mathematical model of the streamwise vortex is constructed. Three interaction regimes (weak, moderate, and strong) are found. It is shown numerically that vortex breakdown is possible in the case of strong interaction. The influence of the governing parameters on the interaction type is studied. It is shown that the main effect on the interaction type is exerted by the streamwise velocity and angle of the wedge forming the shock wave. The effect of splitting of the primary vortex on the shock wave in the case of moderate and strong interaction regimes is found.     

Turbulence in a skewed three‐dimensional wall‐bounded shear flow: effect of mean vorticity on structure modification

Mean‐flow three‐dimensionalities affect both the turbulence level and the coherent flow structures in wall‐bounded shear flows. A tailor‐made flow configuration was designed to enable a thorough investigation of moderately and severely skewed channel flows. A unidirectional shear‐driven plane Couette flow was skewed by means of an imposed spanwise pressure gradient. Three different cases with 8°, 34°and 52°skewing were simulated numerically and the results compared with data from a purely two‐dimensional plane Couette flow. The resulting three‐dimensional flow field became statistically stationary and homogeneous in the streamwise and spanwise directions while the mean velocity vector V and the mean vorticity vector Ω remained parallel with the walls. Mean flow profiles were presented together with all components of the Reynolds stress tensor. The mean shear rate in the core region gradually increased with increasing skewing whereas the velocity fluctuations were enhanced in the spanwise direction and reduced in the streamwise direction. The Reynolds shear stress is known to be closely related to the coherent flow structures in the near‐wall region. The instantaneous and ensemble‐averaged flow structures were turned by the skewed mean flow. We demonstrated for the medium‐skewed case that the coherent structures should be examined in a coordinate system aligned with V to enable a sound interpretation of 3D effects. The conventional symmetry between Case 1 and Case 2 vortices was broken and Case 1 vortices turned out to be stronger than Case 2. This observation is in conflict with the common understanding on the basis of the spanwise (secondary) mean shear rate. A refined model was proposed to interpret the structure modifications in three‐dimensional wall‐flows. What matters is the orientation of the mean vorticity vector Ω relative to the vortex vorticity vector ω _v, that is, the sign of Ω · ω _v. In the present situation, Ω · ω _v > 0 for the Case 1 vortices causing a strengthening relative to the Case 2 vortices. Copyright © 2011 John Wiley & Sons, Ltd.     

三维旋涡的干扰作用

本文用七孔探针对于三维旋涡流场特性及三维旋涡之间的干扰流场进行了比较详细的测量。通过对于不同截面上有无旋涡干扰的两种条件下沿集中涡涡核径向的总压系数、静压系数和速度分布等特性的比较，讨论了三维旋涡之间干扰作用的机制。     

Normal and oblique collisions of a vortex ring with a wall

The oblique collision of a vortex ring with a solid wall, atRe=/=1389, has been analysed by the direct simulation of the Navier-Stokes equations in Cartesian coordinates. In accordance with a previous experimental study [1], the secondary vorticity produced at the wall is organized into a loop-like vortex in the region of the ring furthest away from the wall. As the ring approaches the wall, the region closest is subjected to a high rate of stretching which increases the vorticity in the core. The vorticity gradients along the core generate bi-helical vortex lines continually displaced towards the region of the ring furthest away from the wall. The analysis of the vorticity and straining fields revealed that the pressure gradient along the core is responsible for the convective motion that displaces these vortex lines and accumulates secondary vorticity in the region far from the wall. This vorticity rolls up and forms a secondary structure which by self-induction moves away from the wall.The fundamental role of the differential stretching has been demonstrated by comparing the case of oblique collision with that of normal collision and with the collision of a two-dimensional vortex pair with an oblique wall.

---

Sommario L'interazione di un vortice ad anello con una parete obliqua, aRe=1389, è stata analizzata mediante la simulazione diretta delle equazioni di Navier-Stokes in coordinate cartesiane. In accordo con un precedente esperimento [1] è stato evidenziato che la vorticità secondaria, prodotta alla parete, si organizza in una strutura vorticosa a loop nella regione dell'anello più lontana dalla parete. Quando il vortice si avvicina alla parete, la parte più vicina è soggetta ad un'elevata deformazione che aumenta il valore della vorticità nel core. La distribuzione non uniforme di vorticità lungo il core del vortice genera delle linee di vorticità elicoidali che vengono transportate verso la regione dell'anello più lontana dalla parete. L'analisi dei campi di vorticità e di deformazione ha rivelato che il gradiente di pressione, dovuto al campo di deformazione non uniforme lungo il core del vortice, è responsabile di un moto convettivo che trasporta le linee di vorticità ed accumula la vorticità secondaria nella regione del vortice più lontana dalla parete, dove la struttura secondaria viene generata.Il ruolo fondamentale della deformazione non uniforme è stato evidenziato mediante il confronto della collisione obliqua coni casi di collisione normale e di collisione di una coppia di vortici bidimensionali con una parete obliqua.

     

3D tangentially injected swirling recirculating flow in a nozzle with a slotted‐tube—Effects of groove parameters

A numerical prediction for 3D swirling recirculating flow in an air‐jet spinning nozzle with a slotted‐tube is carried out with the realizable k–ε turbulence model. The effects of the groove parameters on the flow and yarn properties are investigated. The simulation results show that some factors, such as reverse flow upstream of the injector, vortex breakdown downstream of the injector, corner recirculation zone (CRZ) behind the step and vortex ring in the groove caused by the groove geometric variation, are significantly related to fluid flow, and consequently to yarn properties. With increasing groove height, the length of the CRZ increases, while the initial vortex ring in the groove decreases and a same direction rotating vortex forms in the bottom of the groove. Similarly, as the groove width increases, the extent of both vortex breakdown in downstream of the injectors and the vortex ring in the groove increases slightly, whereas the CRZ lengths in stream‐wise direction decrease. Some factors, such as the negative tangential velocities, the size of the vortex rings in the grooves and the CRZ, are constant for nozzles with different groove lengths. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of Volume Energy Supply on the Stability of a Subsonic Vortex Flow

Calculations of the stability of an axisymmetric vortex flow of viscous heat-conducting gas with volume energy supply are presented. The unperturbed axisymmetric vortex flow was found numerically using a quasi-cylindrical approximation of the Navier-Stokes equations under the assumption of constant peripheral-velocity circulation in the ambient co-current flow. The volume energy supply in the viscous vortex core was modeled by an additional source term in the energy equation. The stability characteristics of the viscous vortex flow in a longitudinal vortex with respect to both axisymmetric and non-axisymmetric three-dimensional waves traveling along the vortex axis and corresponding to both positive and negative values of the azimuthal wave number were found using the time-dependent formulation of the linear stability theory for compressible three-dimensional plane-parallel flows.     

Shock–vortex interactions in a soap film

This work experimentally visualizes the interaction of a quasi-one-dimensional moving shock wave with a two-dimensional vortex in a soap film for the first time. A vertical soap film shock tube was used to generate a quasi-one-dimensional moving shock wave and a NACA-0012 airfoil intruded into the soap film was towed to shed the starting vortex. The interesting interaction phenomena were then visualized using a traditional high-speed flash photography. The concentration of sodium dodecyl sulfate (SDS) used was 0.5 CMC (critical micelle concentration) to keep the surfactant molecules behave as two-dimensional gases. A sequence of pictures shows that the shock is distorted non-symmetrically as it passes through the spiral vortex flow field and the vortex structure is compressed in the direction normal to the shock. These flow features observed in soap films are qualitatively similar to their counterparts in gases. In addition, the visualization of the interactions of a quasi-one-dimensional moving shock wave with a Kármán vortex street are presented.      

Influence of aspect ratio on the mean flow field of a surface-mounted finite-height square prism

The flow around surface-mounted, finite-height square prisms at a Reynolds number of Re = 4.2 × 10⁴ was investigated experimentally in a low-speed wind tunnel using particle image velocimetry. The thickness of the boundary layer on the ground plane relative to the width of the prism was δ/D = 1.5. Four prism aspect ratios were tested, AR = 9, 7, 5, and 3, to study how the aspect ratio influences the flow field close to the prism. Upstream of the prism, lowering the aspect ratio from AR = 9 to AR = 3 causes the stagnation point on the upstream face to move closer to the free end, but there is no influence on the location and strength of the horseshoe vortex. Lowering the aspect ratio from AR = 9 to AR = 3 causes the cross-stream vortices in the upper and lower halves of the wake to move downstream and upstream, respectively; the latter vortex is absent for AR = 3, suggesting this prism sits below the critical aspect ratio. Above the free end of the prism, within the region of separated flow, lowering the aspect ratio from AR = 9 to AR = 3 shifts the location of the cross-stream vortex farther downstream. For the prism of AR = 3, reverse flow above the free end is stronger yet more unsteady compared to the more slender prisms, while the streamwise edge vortices are smaller and weaker.     

Experimental investigation of vortex rings impinging on inclined surfaces

Vortex–ring interactions with oblique boundaries were studied experimentally to determine the effects of plate angle on the generation of secondary vorticity, the evolution of the primary vorticity and secondary vorticity as they interact near the boundary, and the associated energy dissipation. Vortex rings were generated using a mechanical piston-cylinder vortex ring generator at jet Reynolds numbers 2,000–4,000 and stroke length to piston diameter ratios (L/D) in the range 0.75–2.0. The plate angle relative to the initial axis of the vortex ring ranged from 3 to 60°. Flow analysis was performed using planar laser-induced fluorescence (PLIF), digital particle image velocimetry (DPIV), and defocusing digital particle tracking velocimetry (DDPTV). Results showed the generation of secondary vorticity at the plate and its subsequent ejection into the fluid. The trajectories of the centers of circulation showed a maximum ejection angle of the secondary vorticity occurring for an angle of incidence of 10°. At lower incidence angles (<20°), the lower portion of the ring, which interacted with the plate first, played an important role in generation of the secondary vorticity and is a key reason for the maximum ejection angle for the secondary vorticity occurring at an incidence angle of 10°. Higher Reynolds number vortex rings resulted in more rapid destabilization of the flow. The three-dimensional DDPTV results showed an arc of secondary vorticity and secondary flow along the sides of the primary vortex ring as it collided with the boundary. Computation of the moments and products of kinetic energy and vorticity magnitude about the centroid of each vortex ring showed increasing asymmetry in the flow as the vortex interaction with the boundary evolved and more rapid dissipation of kinetic energy for higher incidence angles.     

Experimental study on the flow regimes past a confined prism undergoing self-sustained oscillations

An experimental study based on Particle Image Velocimetry (PIV) is presented with the objective of studying the flow regimes that appear in the flow past a confined prism undergoing self-sustained oscillations at low Reynolds numbers (Re). The square-section prism, placed inside a 3D square cross-section vertical channel with a confinement ratio of 1/2.5, was tethered to the channel walls and, therefore, it was allowed to move freely transverse to the incoming flow. Re (based on the prism cross-section height) was varied in the range from 100 to 700. Three different prism to fluid density ratios (m¹) were considered: 0.56, 0.70, and 0.91. These two parameters, Re and m¹, were used to map the results obtained. In particular, it was found that five different regimes appear: (1) steady prism with steady recirculation bubble, (2) steady prism with unsteady vortex shedding wake, (3) large amplitude low frequency oscillating prism with unsteady vortex shedding wake, (4) small amplitude high frequency oscillating prism with unsteady vortex shedding wake, and (5) irregular/chaotic motion of both the prism and the wake. The PIV results and associated numerical simulations were used to analyze the different prism and wake states.     

Experimental study on the wake behind tapered circular cylinders

The flow around tapered cylinders can act as basic models for numerous bluff body flows with a spanwise variation of either the body shape or the inflow conditions. The well-known vortex street is influenced by strong three-dimensional effects from the spanwise variation of the shedding frequency, namely oblique vortex shedding and vortex dislocations. Stereo-PIV was chosen to study these phenomena, since it allows analyzing planes with the full three-component, instantaneous velocity fields and local, time-dependent variations in the same setting. Hence, detailed aspects of the vortex dislocation phenomenon are presented. Single vortex dislocation events are presented through the local variation of the three measured velocity components u, v and w. Longer time-series reveal both period and location of these dislocation events, as well as quantity and sizes of the cells of constant shedding velocity in between them. The influence of the Reynolds number and the cylinder aspect ratio on the vortex cells could be shown. The analysis of the vortex shedding behavior shows good agreement with previously published results. At the same time, the applied PIV technique provides more spatial information than point-based measurements and offers insight into a Reynolds number range that is currently out of reach of Direct Numerical Simulations.     

网格自适应技术在复杂外形流场模拟中的应用

建立了一套适用于非结构混合网格自适应方法,针对激波和涡的不同特征采用不同加密探测器,各向异性加密棱柱单元并沿物面法向方向剖分所有棱柱层,各向异性剖分四面体单元,并保证四面体与棱柱交界面上网格协调。构造Hermit插值近似投影物面新加网格点和基于Laplacian光滑方法对空间网格进行优化。通过网格自适应加密,使用Roe格式计算高超声速球头绕流的红玉现象得到明显减轻。F16飞机含激波和脱体涡的流场自适应计算表明,网格加密集中在激波面和涡核附近区域,激波和涡计算更准确。