Profiling of impurities in illicit methamphetamine by high-performance liquid chromatography and capillary electrochromatography

High performance liquid chromatography (HPLC) with photodiode array (PDA) UV and fluorescence (FL) detection, and capillary electrochromatography (CEC) with laser-induced fluorescence (LIF) detection were investigated for the analysis of acidic extracts derived from illicit methamphetamine. These compounds include major impurities from the hydriodic acid/red phosphorous reduction method, i.e., 1,3-dimethyl-2-phenylnaphthalene and 1-benzyl-3-methylnaphthalene, and other trace-level, structurally related impurities. For certain of these solutes, HPLC with conventional FL detection gave at least a 60× increase in sensitivity over UV detection. In addition, other highly fluorescent impurities were detected in methamphetamine produced via four other synthetic routes. The use of a rapid scanning FL detector (with acquisition of “on the fly” excitation or emission) provided structural information and gave “optimum” excitation and emission detection wavelengths. CEC with LIF detection using UV laser excitation provided greatly improved chromatography over HPLC, with good detection limits in the low ng/ml range. Both methodologies provide good run-to-run repeatability, and have the capability to distinguish between samples.     

Recent developments in optical detection methods for microchip separations

This paper summarizes the features and performances of optical detection systems currently applied in order to monitor separations on microchip devices. Fluorescence detection, which delivers very high sensitivity and selectivity, is still the most widely applied method of detection. Instruments utilizing laser-induced fluorescence (LIF) and lamp-based fluorescence along with recent applications of light-emitting diodes (LED) as excitation sources are also covered in this paper. Since chemiluminescence detection can be achieved using extremely simple devices which no longer require light sources and optical components for focusing and collimation, interesting approaches based on this technique are presented, too. Although UV/vis absorbance is a detection method that is commonly used in standard desktop electrophoresis and liquid chromatography instruments, it has not yet reached the same level of popularity for microchip applications. Current applications of UV/vis absorbance detection to microchip separations and innovative approaches that increase sensitivity are described. This article, which contains 85 references, focuses on developments and applications published within the last three years, points out exciting new approaches, and provides future perspectives on this field.     

Development of a polymerase chain reaction and capillary gel electrophoresis method for the detection of chicken or turkey meat in heat-treated pork meat mixtures

A polymerase chain reaction and capillary gel electrophoresis (PCR-CGE) method with ultraviolet (UV) or laser induced fluorescence detection (LIF) was established for the detection of chicken or turkey in heat-treated pork meat mixtures. Mitochondrial DNA samples extracted from heat treated meat were amplified with their corresponding specific primers yielding PCR products between 200 and 300 bp. LIF detection was superior than UV detection in terms of precision and sensitivity for the study of DNA fragments. The CGE-LIF method was highly reproducible and accurate for determining DNA fragment size. The PCR-CGE-LIF was sensitive since a significant fluorescent signal was obtained at the minimum admixture level employed of 1% in meat mixtures. Thus, the PCR-CGE-LIF method established was useful for the detection of chicken or turkey in heat treated meat mixtures and may prove to be useful for the detection of poultry meat in pork processed products.     

UV cross-linking of unmodified DNA on glass surfaces

The performance of DNA microarrays strongly depends on their surface properties. Furthermore, the immobilization method of the capture molecules is of importance for the efficiency of the microarray in terms of sensitivity and specificity. This work describes the immobilization of single-stranded capture oligonucleotides by UV cross-linking on silanated (amino and epoxy) glass surfaces. Thereby we used amino (NH₂) and poly thymine/poly cytosine modifications of the capture sequences as well as unmodified capture molecules. The results were compared to UV cross-linking of the same DNA oligonucleotides on unmodified glass surfaces. Immobilization and hybridization efficiency was demonstrated by fluorescence and enzyme-induced deposition of silver nanoparticles. We found out that single-stranded DNA molecules do not require a special modification to immobilize them by UV cross-linking on epoxy- or amino-modified glass surfaces. However, higher binding rates can be achieved when using amino-modified oligonucleotides on an epoxy surface. The limit of detection for the used settings was 5 pM.     

Performance and selectivity of polymeric pseudostationary phases for the electrokinetic separation of amino acid derivatives and peptides

Two polymeric pseudostationary phases, one an acrylamide polymer and the second a siloxane polymer, have been investigated for the separation of naphthalene-2,3-dicarboxaldehyde (NDA)-derivatized amino acids and small peptides. The dervatized amino acids were detected by UV absorbance and laser-induced fluorescence (LIF) detection. The polymers provided very high efficiency and good selectivity for the separation of the amino acids. The separation selectivity using the polymers was significantly different from that of SDS micelles, and there were subtle differences in selectivities between the polymers. Although very good detection limits were obtained with LIF detection, a significant background signal was observed when the polymers were not washed to remove fluorescent impurities. The polymers did not separate the peptides very well. It is postulated that the fixed covalent structure of the polymers prevents them from interacting strongly or efficiently with the peptides, which are large in relation to the analytes typically separated by electrokinetic chromatography using polymers.     

Migration behavior and separation of active components in Glycyrrhiza uralensis Fisch and its commercial extract by micellar electrokinetic capillary chromatography

1-Anilinonaphthalene-8-sulfonic acid (1,8-ANS), 4,4'-dianilino-1,1'-binaphthyl-5,5'-disulfonic acid (bis-ANS) and 2-(p-toluidino)naphthalene-6-sulfonic acid (2,6-TNS) were evaluated as additives in different buffers for the detection of bovine whey proteins using laser-induced fluorescence (LIF) monitoring in capillary electrophoresis (CE). These N-arylaminonaphthalene sulfonates furnish a large fluorescence emission when associated to some proteins whereas their emission in aqueous buffers, such as those used in CE separations, is very small. To select the best detection conditions, the fluorescence of these probes was first compared using experiments carried out in a fluorescence spectrophotometer. Using bovine serum albumin (BSA) as a model protein, it was demonstrated that 2-(N-cyclohexylamino)ethanesulfonic acid (CHES) buffer (pH 8 and pH 10.2) and the fluorescent probe 2,6-TNS gave rise to the highest increase in fluorescence for BSA. When the composition of these separation buffers was optimized for the electrophoretic separations, CHES buffer, pH 10.2 was chosen as the most suitable buffer to detect bovine whey proteins. The limit of detection obtained for some whey proteins in CE separations was about 6.10(-8) M for BSA, 3.10(-7) M for beta-lactoglobulin A (beta-LGA), 3.10(-7) M for beta-lactoglobulin B (beta-LGB), and 3.10(-6) M for alpha-lactalbumin (alpha-LA). These detection limits were compared to those achieved using UV detection under the same separation conditions. The results showed that the detection limits of BSA, beta-LGA and beta-LGB were twice as good using LIF than with UV detection. However, the limit of detection for alpha-LA was better when UV was used. The applicability of LIF detection to CE separation of whey proteins in bovine milk samples was also demonstrated.     

Study on the Interaction between Gatifloxacin Mesylate and Salmon Sperm DNA by Fluorescence Method

The interaction between gatifloxacin mesylate (GM) and salmon sperm DNA was studied by fluorescence spectrometry and ultra‐violet (UV) spectrometry. Additions of salmon sperm DNA to GM solution resulted in its strong fluorescence quenching and UV absorbance decrease due to the strong interaction between GM and salmon sperm DNA. Both the maximum fluorescence emission wavelength and the maximum UV absorbance wavelength of GM did not change with the increasing concentration of salmon sperm DNA, indicating no intercalative binding existed between them. The Stern‐Volmer plot indicated that the fluorescence‐quenching constant at different temperatures or different salmon sperm DNA concentration ranges was different. Effects of ionic strength and I^? on the fluorescence quenching of GM by salmon sperm DNA indicated that electrostatic interaction and groove binding coexisted between them.     

Novel wavelength-resolved fluorescence detection for a high-throughput capillary electrophoresis system under a diascopic configuration

This paper presents a novel method regarding a wavelength-resolved fluorescence detection scheme for high-throughput analysis of bio-samples in a micro-CE chip. Instead of using the conventional laser-induced fluorescence (LIF) microscope equipped with delicate spatial filters and complex control systems, this study adopts a hollow cone illumination generated using a dark-field condenser for exciting fluorescence in the microchannel and an ultraviolet-visible-near-infrared (UV-Vis-NIR) spectrometer for detecting the emission signals. Experimental results show that the proposed system is feasible for simultaneously detecting a mixed sample composed of Atto 610, Rhodamine B and fluorescein isothiocyanate (FITC) fluorescent dyes in a single test run. Furthermore, a mixed bio-sample composed of two mixed 16-mer single-stranded DNAs labeled with Cy3 and FITC fluorescent dyes is also successfully detected with the proposed system. The measured limit of detection (LOD) for detecting FITC of the proposed system can be as low as 5.4x10(-6)M (S/N=3). This proposed detection method has shown its potential on RNA identification and DNA sequencing applications.     

Fluorescence derivatization of single-walled carbon nanotubes for analysis by means of conventional CE-LIF

Single-walled carbon nanotubes (SWNTs) are now widely used in many fields, and while many analytical methods for SWNTs have been reported, there are few practical analytical methods that combine the necessary levels of selectivity and sensitivity. We have developed a highly sensitive separation method for fluorescence-derivatized SWNTs by means of conventional CE with laser-induced fluorescence. First, SWNTs were dispersed using a triphenylene derivative into the water, and the excess dispersant was removed by nitric acid treatment. The dispersed SWNTs were then derivatized with a fluorescence reagent, 4-aminofluorescein. Finally, the derivatized SWNTs were analyzed using a conventional apparatus CE-LIF detection. The SWNTs migrated within 20 min. The detection sensitivity of SWNTs was improved by about 170 times with LIF detection as compared with UV detection. We anticipate that the derivatized SWNTs can also be detected with high sensitivity using LC.     

Solid-state UV laser-induced fluorescence detection in capillary electrophoresis

Two solid-state UV lasers were applied to the laser-induced fluorescence (LIF) detection of various groups of compounds after separation by capillary electrophoresis. These lasers are thermoelectric-cooled, highly compact, and inexpensive. Such lasers provide few mW of quasi-continuous wave (CW) power which are sufficient and stable for LIF detection. Native fluorescence detection of tryptophan-containing proteins and peptides and related indoles was achieved at the nM level with the laser operating at 266 nm. Detection of fluorescamine-labeled amino acids and peptides was also possible at the nM level with the laser operating at 355 nm. Amino acids at a concentration as low as 10 ng/mL could be labeled with fluorescamine. Solid-state UV-LIF detection of the tryptic digest of cytochrome c after fluorescamine derivatization was demonstrated.     

DNA hybridization in reverse micelles and its application to mutation detection

DNA hybridization was investigated in AOT (sodium di-2-ethylhexyl sulfosuccinate)/isooctane reverse micelles. The single-stranded DNA molecules were encapsulated in the nanoscale water pools formed in the reverse micelles, reducing the hybridization rate. The DNA hybridization can be monitored by simply measuring the UV absorbance of the reverse micellar solution at 260 nm. We found that the DNA hybridization occurred only at the restricted water content (Wo = [H2O]/[AOT] = 20) and below room temperature. We applied this DNA hybridization behavior in reverse micelles to mutation detection in a model gene p53 and successfully detected the single nucleotide mutations in 20-mer. 30-mer and 50-mer nucleotides without a DNA labeling.     

A simple and sensitive method of nonaqueous capillary electrophoresis with laser-induced native fluorescence detection for the analysis of chelerythrine and sanguinarine in Chinese herbal medicines

Laser-induced fluorescence (LIF) is a highly sensitive detection method for capillary electrophoresis (CE). However, it usually requires analyte to be derivatized, unless the wavelength of native fluorescence of analyte matches the laser's. That limits its application in drug analysis. In this work, we introduced a rapid, simple and sensitive method of nonaqueous capillary electrophoresis with laser-induced native fluorescence (NACE-LIF) detection for the analysis of chelerythrine and sanguinarine for the first time. As these two alkaloids have some native fluorescence, they were directly detected using a commercially available Ar⁺ laser without troublesome fluorescent derivatization. The fluorescence was enhanced by nonaqueous media. Compared with previously reported UV detection method, lower limit of detection (LOD) is achieved thanks to the high sensitivity of LIF detection (2.0 ng/mL for chelerythrine and 6.3 ng/mL for sanguinarine). Moreover, with NACE, the baseline separation of these alkaloids is finished within 3.5 min. This method is successfully applied to determine the contents of chelerythrine and sanguinarine in Macleaya cordata (Willd.) R. Br. and Chelidonium majus L.     

Analysis of polymerase chain reaction-product by capillary electrophoresis with laser-induced fluorescence detection and its application to the diagnosis of medium-chain acyl-coenzyme A dehydrogenase deficiency

Capillary gel electrophoresis with laser-induced fluorescence (CGE-LIF) has been developed to detect polymerase chain reaction (PCR) amplified samples. LIF detection was performed using Thiazole Orange as the fluorescent intercalating dye. This method was ca. 100X as sensitive as that with UV detection. The highly sensitive CGE-LIF was applied to the detection of the most prevalent mutation (lysine³²⁹- to-glutamic acid substitution) in medium-chain acyl-coenzyme A dehydrogenase (MCAD) deficiency. The disorder, which shows an autosomal recessive inheritance, is known to be highly prevalent among Caucasian population and often mimics as Reye-like syndrome or sudden infant death.

A DNA fragment containing the mutation site was PCR-amplified with two sets of allele specific oligonucleotide primers, followed by CGE-LIF. The mutant allele produced a 175-base pairs DNA fragment, which the normal allele generated a 202-base pairs DNA fragment. CGE-LIF clearly distinguished these PCR products, facilitating rapid diagnosis of MCAD deficiency.     

Laser-induced fluorescence reader with a turbidimetric system for sandwich-type immunoassay using nanoparticles

A unique laser-induced fluorescence (LIF) reader equipped with a turbidimetric system was developed for a sandwich-type immunoassay using nanoparticles. The system was specifically designed to reduce experimental error caused by particle loss, aggregation and sinking, and to improve analytical performance through ratiometric measurement of the fluorescence with respect to the turbidimetric absorbance. For application to determine the concentration of salinomycin, magnetic nanoparticles (MNPs) and FITC-doped silica nanoparticles (colored balls) immobilized with antibody were synthesized for magnetic extraction and for tagging as a fluorescence probe, respectively. The detection limit of about 39 pg mL⁻¹ was obtained, which was an improvement of about 2-fold compared to that obtained without employment of the turbidimetric system. Calibration linearity and sensitivity were also improved, with increase from 0.8601 to 0.9905 in the R²-coefficient and by 1.92-fold for the curve slope, respectively. The developed LIF reader has the potential to be used for fluorescence measurements using various nanomaterials, such as quantum dots.     

Pulsed lasers versus continuous light sources in capillary electrophoresis and fluorescence detection studies: Photodegradation pathways and models

Pulsed lasers are widely used in capillary electrophoresis (CE) studies to provide laser induced fluorescence (LIF) detection. Unfortunately pulsed lasers do not give linear calibration curves over a wide range of concentrations. While this does not prevent their use in CE/LIF studies, the non-linear behavior must be understood. Using 7-hydroxycoumarin (7-HC) (10–5000 nM), Tamra (10–5000 nM) and tryptophan (1–200 μM) as dyes, we observe that continuous lasers and LEDs result in linear calibration curves, while pulsed lasers give polynomial ones. The effect is seen with both visible light (530 nm) and with UV light (355 nm, 266 nm). In this work we point out the formation of byproducts induced by pulsed laser upon irradiation of 7-HC. Their separation by CE using two Zeta LIF detectors clearly shows that this process is related to the first laser detection. All of these photodegradation products can be identified by an ESI-/MS investigation and correspond to at least two 7HC dimers. By using the photodegradation model proposed by Heywood and Farnsworth (2010) and by taking into account the 7-HC results and the fact that in our system we do not have a constant concentration of fluorophore, it is possible to propose a new photochemical model of fluorescence in LIF detection. The model, like the experiment, shows that it is difficult to obtain linear quantitation curves with pulsed lasers while UV-LEDs used in continuous mode have this advantage. They are a good alternative to UV pulsed lasers. An application involving the separation and linear quantification of oligosaccharides labeled with 2-aminobezoic acid is presented using HILIC and LED (365 nm) induced fluorescence.     

Some factors affecting enantiomeric impurity determination by capillary electrophoresis using ultraviolet and laser-induced fluorescence detection.

The key factors influencing enantiomer trace determination were investigated; these include resolution capillary diameter, limit of detection, linear range and type of detection. Chiral reagents, (+)- and (-)-1-(9-fluorenyl)ethyl chloroformate (FLEC), were employed as probes to demonstrate the influence of the variables. In order to find the best resolution, separation variables were optimized in both capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) modes by the application of factorial design experiments. A highly efficient chiral separation of the (+/-)-FLEC, derivatized with nonchiral amino acids, was achieved when using gamma-cyclodextrin as the chiral selector. The benefits of using a small diameter capillary for direct determination of both (+) and (-)-FLEC impurity (0.05-0.1% area/area) were demonstrated using UV detection and applying a sample stacking condition. A frequency-doubled argon ion laser (244 nm) was used as light source for laser-induced fluorescence (LIF) detection. Excitation light was provided by means of an optical fiber directed into the Hewlett Packard 3D capillary cartridge. The signals from UV and LIF were monitored simultaneously. The application of LIF detection greatly improved sensitivity and linear range. Further, as a consequence of the increased sensitivity, sample loading could be decreased, which led to an improvement of separation efficiency. Direct determination of 0.005% impurity could be achieved within the linear range.     

Enantioseparation of the anticoagulant drug phenprocoumon in capillary electrophoresis with UV and laser-induced fluorescence detection and application of the method to urine samples

The enantioseparation of phenprocoumon (PhC) in capillary electrophoresis (CE) has been studied using various cyclodextrins (CDs) such as native alpha, beta and gamma-CD and several neutral and randomly, as well as selectively substituted charged CD derivatives. Reversal of the enantiomer migration order was observed when using heptakis(2,3,6-tri-O-methyl (TM)-beta-CD as a chiral selector compared to all other CDs used. The detection of PhC was performed using either UV or laser-induced fluorescence (LIF) detection. The limit of detection (LOD) observed with LIF detection was ca. 20 times lower compared to UV. The method has been applied to the analysis of urine samples of the patient under treatment with PhC in combination with other drugs such as ramipril, hydrochlorothiazide, and nifedipine.     

Use of a capillary electrophoresis instrument with laser-induced fluorescence detection for DNA quantitation. Comparison of YO-PRO-1 and PicoGreen assays

Highly selective and sensitive assays are required for detection and quantitation of the small masses of DNA typically encountered in clinical and forensic settings. High detection sensitivity is achieved using fluorescent labeling dyes and detection techniques such as spectrofluorometers, microplate readers and cytometers. This work describes the use of a laser-induced fluorescence (LIF) detector in conjunction with a commercial capillary electrophoresis instrument for DNA quantitation. PicoGreen and YO-PRO-1, two fluorescent DNA labeling dyes, were used to assess the potential of the system for routine DNA analysis. Linearity, reproducibility, sensitivity, limits of detection and quantitation, and sample stability were examined for the two assays. The LIF detector response was found to be linear (R2 > 0.999) and reproducible (RSD < 9%) in both cases. The PicoGreen assay displayed lower limits of detection and quantitation (20 pg and 60 pg, respectively) than the YO-PRO-1 assay (60 pg and 260 pg, respectively). Although a small variation in fluorescence was observed for the DNA/dye complexes over time, quantitation was not significantly affected and the solutions were found to be relatively stable for 80 min. The advantages of the technique include a 4- to 40-fold reduction in the volume of sample required compared to traditional assays, a 2- to 20-fold reduction in the volume of reagents consumed, fast and automated analysis, and low cost (no specific instrumentation required).     

Combing DNAzyme with single-walled carbon nanotubes for detection of Pb(II) in water

A sensitive and simple assay for the detection of Pb(2+) in aqueous solutions is reported. It takes advantage of the high affinity between single-stranded DNA (ssDNA) and single-walled carbon nanotubes (SWCNT) as well as the capability of SWCNT in fluorescence quenching. Lead(II) catalyzes the cleavage of a fluorescently labeled DNA substrate by a DNAzyme, which releases the single-stranded product to be adsorbed onto a SWCNT. The decrease in fluorescence is proportional to the Pb(2+) concentration. Concentrations as low as 1 nM Pb(2+) in water could be detected and the detection range spans over 5 orders of magnitude. The unique combination of Pb-specific DNAzyme with SWCNT produces a universal, facile and cost-effective sensing platform for lead ions. The concept can be applied to the design of detection assays for other metal ions or small molecules.     

基于阳离子共轭聚合物比色检测HIV逆转录酶的RNase H活性

利用阳离子聚噻吩衍生物与单链DNA和杂合体DNA/RNA通过静电相结合时所产生的紫外吸收变化,建立了一种检测HIV逆转录酶(RT-HIV)的RNase H活性的方法。阳离子聚噻吩衍生物的紫外吸收最大波长位于短波385nm,与单链DNA结合会使聚噻吩衍生物的紫外吸收最大波长红移至525nm;而与杂合体DNA/RNA结合时对其紫外吸收最大波长几乎没有影响,当利用RT-HIV的核糖核酸酶RNase H活性水解掉杂合体中的RNA时,杂合体溶液又会使聚噻吩衍生物的紫外吸收最大波长发生红移。结果表明,紫外吸收最大波长变化明显,甚至直观用肉眼就可以观察到杂合体水解前后溶液颜色的变化。同时还测定了不同时间下RNase H酶水解杂合体中RNA的吸光度变化曲线,计算出了RNase H酶水解的动力学常数和最大初速度。