Recent developments and applications of grazing incidence scattering

A review of recent developments and applications of grazing incidence scattering is presented. In particular, high energy X-rays now make possible the investigation of buried, solid–liquid and liquid–liquid interfaces with high spatial resolution and possibly time resolution. Elemental sensitivity can be provided by resonant reflectivity and fluorescence based techniques using hard and soft X-rays. The use of partial coherence at third generation synchrotron sources enables one to go beyond the statistical properties of interfacial systems and to investigate their dynamics.     

Probing structural changes of spin-coated polystyrene film after swelling and precipitation by synchrotron GIUSAXS and AFM

Polystyrene film of about 50 nm in thickness on silicon wafer was obtained by spin-coating in tetrahydrofuran solution. The film exhibits a rough surface as shown by atomic force microscopy images and ellipsometry data. Furthermore, such surface roughness produced a characteristic lateral correlation peak in an “out-ofplane” scan in the synchrotron grazing incidence ultra-small angle X-ray scattering pattern. The film was treated with liquids of solvent and non-solvent sequentially, resulting in a process of swelling and precipitation of the polystyrene film. Such a solvent/non-solvent treatment completely changed the original surface structure of the film. Aggregates of polystyrene of different sizes were observed both in atomic force microscopy and synchrotron grazing incidence ultra-small angle X-ray scattering measurements. The results demonstrate that synchrotron grazing incidence ultra-small angle X-ray scattering is a unique means to investigate large area micro-structural features of thin films supported on smooth surfaces.     

Langmuir monolayers as models to study processes at membrane surfaces

The use of new sophisticated and highly surface sensitive techniques as synchrotron based X-ray scattering techniques and in-house infrared reflection absorption spectroscopy (IRRAS) has revolutionized the monolayer research. Not only the determination of monolayer structures but also interactions between amphiphilic monolayers at the soft air/liquid interface and molecules dissolved in the subphase are important for many areas in material and life sciences. Monolayers are convenient quasi-two-dimensional model systems. This review focuses on interactions between amphiphilic molecules in binary and ternary mixtures as well as on interfacial interactions with interesting biomolecules dissolved in the subphase. The phase state of monolayers can be easily triggered at constant temperature by increasing the packing density of the lipids by compression. Simultaneously the monolayer structure changes are followed in situ by grazing incidence X-ray diffraction or IRRAS. The interactions can be indirectly determined by the observed structure changes. Additionally, the yield of enzymatic reaction can be quantitatively determined, secondary structures of peptides and proteins can be measured and compared with those observed in bulk. In this way, the influence of a confinement on the structural properties of biomolecules can be determined. The adsorption of DNA can be quantified as well as the competing adsorption of ions at charged interfaces. The influence of modified nanoparticles on model membranes can be clearly determined. In this review, the relevance and utility of Langmuir monolayers as suitable models to study physical and chemical interactions at membrane surfaces are clearly demonstrated.     

Two-Dimensional Crystallography of Amphiphilic Molecules at the Air–Water Interface

The advent of well-collimated, high-intensity synchrotron X-ray sources and the consequent development of surface-specific X-ray diffraction and fluorescence techniques have recently revolutionized the study of Langmuir monolayers at the air–liquid interface. These methods allowed for the first time the determination of the in-plane and vertical structure of such monolayers with a resolution approaching the atomic level. We briefly describe these methods, including grazing incidence X-ray diffraction, specular reflectivity, Bragg rods, standing waves, and surface fluorescence techniques, and review recent results obtained from them for Langmuir films. The methods have been successfully applied in the elucidation of the structure of crystalline aggregates of amphiphilic molecules such as alcohols, carboxylic acids and their salts, α-amino acids, and phospholipids at the water surface. In addition, it became possible to monitor by diffraction the growth and dissolution of the crystalline self-aggregates as well as structural changes occurring by phase transitions. Furthermore, the surface X-ray methods shed new light on the structure of the underlying ionic layer of attached solvent or solute species. Examples are given where singly or doubly charged ions bound to the two-dimensional (2D) crystal form either an ordered or diffuse counterionic layer. Finally, the surface diffraction methods provide data on transfer of structural information from 2D clusters to 3D single crystals, which had been successfully accomplished by epitaxial-like crystallization both in organic and inorganic crystals.     

Review on grazing incidence X-ray spectrometry and reflectometry

Grazing incidence X-ray techniques are now widely used for surface and thin film analysis. The present article overviews the recent advancement since 1993 of the grazing incidence X-ray spectrometry and reflectometry in both theoretical and experimental aspects. Every current topic related to the total reflection X-ray fluorescence spectrometry (TXRF) is described in detail through the introduction of numerous published works on the application in the various fields of the science and industrial technologies. Recent rapid growth in diffuse scattering at grazing incidence as well as in specular reflection is another important scope. The combined measurements of different grazing incidence X-ray techniques might be a future trend for realizing further advanced analysis of the surface and interfaces of materials.     

X-ray investigation of monolayers formed at the soft air/water interface

Gibbs or Langmuir monolayers formed at the soft air/liquid interface are easy to handle and versatile model systems for material and life sciences. The phase state of the monolayers can be modified by lateral compression of the film while the layer structural changes are monitored by highly sensitive surface characterization techniques. The use of high brilliant synchrotron light sources for X-ray experiments is essential for the monolayer research. The present review highlights the recent achievements recorded in the monolayer field with a special emphasis on different synchrotron based X-ray characterizing methods as: grazing incidence X-ray diffraction, X-ray reflectivity and total reflection X-ray fluorescence. Some examples of single-chain surfactants, special sugar lipids, and semifluorinated compounds are given. Additionally, thin layers formed by peptides, polymers or nanoparticles are highlighted.     

Colloidal wettability probed with X-ray microscopy

Colloids (colloidal particles or nanoparticles) and their in-situ characterizations are important topics in colloid and interface science. In-situ visualization of colloids with X-ray microscopy is a growing frontier. Here, after a brief introduction on the method, we focus on its application for identifying nanoscale wettability of colloidal particles at fluid interfaces, which is a critical factor in colloidal self-assembly. We discuss a quantitative study on colloidal wettability with two microscopic methods: (i) X-ray microscopy by visualizing natural oil–water interfaces and (ii) confocal microscopy by visualizing fluorescently-labeled interfaces. Both methods show consistent estimation results in colloid–fluid interfacial tensions. This comparison strongly suggests a feasibility of X-ray microscopy as a promising in-situ protocol in colloid research, without fluorescent staining. Finally, we address a prospect of X-ray imaging for colloid and interface science.     

Surface versus confinement induced morphology transition in triblock copolymer films: a grazing incidence small angle neutron scattering investigation

The internal nanostructure resulting from microphase separation in triblock copolymer films of polyparamethylstyrene-block-polystyrene-block-polyparamethylstyrene, P(pMS-b-Sd8-b-pMS), has been investigated with grazing incidence small angle neutron scattering (GISANS). X-ray reflectivity, grazing incidence small-angle X-ray scattering (GISAXS), optical microscopy and atomic force microscopy (AFM) complement the investigation. The influence of two limiting interfaces present in confinement is compared to the presence of only one surface. GISANS allows for the detection of structures in the very limited sample volume of confined films as well as for a depth sensitivity to probe the near free surface part of bulk films. With respect to the surface a perpendicular oriented lamella is observed. In contrast to the shrinkage of the characteristic lamellar spacing in confinement at the free surface, a slight increase is determined.     

Interfacial assembly of a phospholipid Langmuir monolayer by electrodeposited silver colloids

Two-dimensional nanostructured silver films were electrodeposited at the surface of a silver nitrate subphase coated by a negatively charged dimyristoylphosphatidylglycerol (DMPG) Langmuir monolayer. The modifications of the phospholipid interfacial organization generated by the growing colloidal silver film were investigated using surface pressure-time isotherms and grazing incidence X-ray diffraction experiments (GIXD). A decrease in the initial surface pressure of the DMPG monolayer is observed outside of the growing silver film, followed by a stabilization of the surface pressure when the radius of the metallic layer reaches its plateau value. This behavior is attributed to the compression of the DMPG molecules above the silver film and to the correlated relaxation and expansion of those outside the silver film area as recorded by a Wilhelmy pressure sensor. GIXD experiments further evidenced the contraction of the phospholipid monolayer above the electrochemically growing films. Indeed, the diffraction spectra show a shift in the peak position toward higher values of the in-plane component of the wave-vector transfer, indicating a closer packing of the DMPG alkyl chains. This is also in agreement with the observed loss of the chain tilt angle, suggesting that the colloidal silver film induces interfacial structuring of the DMPG monolayer.     

Grazing incidence small-angle X-ray scattering: an advanced scattering technique for the investigation of nanostructured polymer films

Hamburg workshop on the "application of synchrotron radiation in chemistry"With grazing incidence small-angle X-ray scattering (GISAXS) the limitations of conventional small-angle X-ray scattering with respect to extremely small sample volumes in the thin-film geometry are overcome. GISAXS turned out to be a powerful advanced scattering technique for the investigation of nanostructured polymer films. Similar to atomic force microscopy (AFM), a large interval of length between molecular and mesoscopic scales is detectable with a surface-sensitive scattering method. While with AFM only surface topographies are accessible, with GISAXS the buried structure is also probed. Because a larger surface area is probed, GISAXS also has a much larger statistical significance compared to AFM. Due to the high demand on collimation, GISAXS experiments are based on synchrotron radiation. Nanostructures parallel and perpendicular to the sample surface observable in thin poly(styrene- block-isoprene) diblock copolymer films are presented as an example of the possibilities of GISAXS.     

Influence of nanoparticle surface functionalization on the thermal stability of colloidal polystyrene films

The installation of large scale colloidal nanoparticle thin films is of great interest in sensor technology or data storage. Often, such devices are operated at elevated temperatures. In the present study, we investigate the effect of heat treatment on the structure of colloidal thin films of polystyrene (PS) nanoparticles in situ by using the combination of grazing incidence small-angle X-ray scattering (GISAXS) and optical ellipsometry. In addition, the samples are investigated with optical microscopy, atomic force microscopy (AFM), and field emission scanning electron microscopy (FESEM). To install large scale coatings on silicon wafers, spin-coating of colloidal pure PS nanoparticles and carboxylated PS nanoparticles is used. Our results indicate that thermal annealing in the vicinity of the glass transition temperature T(g) of pure PS leads to a rapid loss in the ordering of the nanoparticles in spin-coated films. For carboxylated particles, this loss of order is shifted to a higher temperature, which can be useful for applications at elevated temperatures. Our model assumes a softening of the boundaries between the individual colloidal spheres, leading to strong changes in the nanostructure morphology. While the nanostructure changes drastically, the macroscopic morphology remains unaffected by annealing near T(g).     

Colloidal interactions between asphaltene surfaces in aqueous solutions

Asphaltene at oil/water interfaces plays a dominant role in the recovery of crude oil. In this study, asphaltene monolayer films were deposited on hydrophobic silicon wafers and silica spheres from oil-water interfaces using a Langmuir interfacial trough. The morphology of the deposited asphaltene films was characterized with an atomic force microscope (AFM). The colloidal forces between the prepared asphaltene films in aqueous solutions were measured with AFM to shed light on the stabilization of water or oil droplets coated with asphaltene films. Factors such as solution pH, KCl concentration, calcium addition, and temperature all showed a strong impact on colloidal forces between the prepared asphaltene films. The findings provided a better understanding of asphaltene interfacial films at an oil/water interface in stabilizing bitumen-in-water and water-in-bitumen emulsions.     

GISAXS view of vanadium/cerium oxide thin films and influence of lithium intercalation

An examination of structural modifications, induced by mixing vanadium and cerium oxides and by the introduction of lithium in vanadium and mixed vanadium/cerium oxide films, was performed using synchrotron sourced grazing incidence small-angle X-ray scattering. Samples were sol-gel-derived films, deposited by a dip-coating technique. An analysis of the scattering data, acquired by a two-dimensional detection system, is based on the comparison of the surface and bulk characteristics of the film. The trend of estimated structural modifications is supported by the results of previous investigations on a different length scale, performed by atomic force microscopy.     

X-Ray Analysis of Multi-Films for Electrochromic Device Application

Multilayer films based on tungsten oxide (WO₃), ITO (indium tin oxide) and CdS were deposited mainly by reactive dc magnetron sputtering onto glass substrates for electrochromic application. The thin films were analyzed by means of XPS (X-ray photoelectron spectroscopy), GIXD (grazing incidence X-ray diffraction) and XRD (X-ray diffraction). XRD and XPS results confirmed that the films were WO₃, CdS and ITO, respectively. The surface and interface of the CdS/ITO bi-layered film was studied by GIXD in different incidence angles. Detailed results about the amorphous characterization of the films during room temperature growth and post annealing are given.     

Supramolecular assembly at interfaces: formation of an extended two-dimensional coordinate covalent square grid network at the air-water interface

Reaction of a Langmuir monolayer of an amphiphilic pentacyanoferrate(3+) complex with Ni(2+) ions from the subphase results in the formation of a two-dimensional iron-nickel cyanide-bridged network at the air-water interface. The network can be transferred to various supports to form monolayer or multilayer lamellar films by the Langmuir-Blodgett (LB) technique. The same network does not form from homogeneous reaction conditions. Therefore, the results demonstrate the potential utility of an interface as a structure director in the assembly of low dimensional coordinate covalent network solids. Characterization of the LB film extended networks by X-ray photoelectron spectroscopy (XPS), FT-IR spectroscopy, SQUID magnetometry, X-ray absorption fine structure (XAFS), and grazing incidence synchrotron X-ray diffraction (GIXD) revealed a face-centered square grid structure with an average domain size of 3600 A(2). Magnetic measurements indicated that the network undergoes a transition to a ferromagnetic state below a T(c) of 8 K.     

Liquid-liquid interfaces: In isolation and in interaction

Although liquid-liquid interfaces are as important as liquid-vapor interfaces in many fields, including biology and technology, they have received much less attention in terms of systematic experimental studies. Many techniques are, in principle, relevant to both types of interface; likewise similar theories can often be developed for both. The basic physical chemistry of isolated interfaces, i.e. interfaces between two bulk liquids in mutual contact, is introduced first in this review. The interfacial tension, the forces acting at interfaces (i.e. van der Waals, Coulombic and steric forces), and the thermodynamic treatment of such systems are each considered, and the experimental techniques and some of the more important results are summarized. Next, the problem of three-phase contact (in which two or three of the phases are liquid) is introduced, and the concept of wetting and spreading considered. This leads to a discussion of systems in which two bulk phases (either, or both, of which are liquids) are separated by a liquid film; the mutual interaction of the two interfaces now becomes relevant. The stability of such systems is discussed in terms of the various forces acting within the systems, plus any external forces, such as gravity. The thermodynamics of liquid films is briefly introduced, and some discussion of the magnitude of the two interfacial tensions given. Finally, it is shown that the factors governing the formation and stability of liquid droplets and emulsion systems are directly related to the consideration of the earlier sections.     

Grazing incidence X-ray diffraction studies of condensed double-chain phospholipid monolayers formed at the soft air/water interface

The use of highly brilliant synchrotron light sources in the middle of the 1980s for X-ray diffraction has revolutionized the research of condensed monolayers. Since then, monolayers gained popularity as convenient quasi two-dimensional model systems widely used in biophysics and material science. This review focuses on structures observed in one-component phospholipid monolayers used as simplified two-dimensional models of biological membranes. In a monolayer system the phase transitions can be easily triggered at constant temperature by increasing the packing density of the lipids by compression. Simultaneously the monolayer structure changes are followed in situ by grazing incidence X-ray diffraction. Competing interactions between the different parts of the molecule are responsible for the different monolayer structures. These forces can be modified by chemical variations of the hydrophobic chain region, of the hydrophilic head group region or of the interfacial region between chains and head groups. Modifications of monolayer structures triggered by changes of the chemical structure of double-chain phospholipids are highlighted in this paper.     

Proton and calcium-gated ionic mesochannels: phosphate-bearing polymer brushes hosted in mesoporous thin films as biomimetic interfacial architectures

Rational construction of interfaces based on multicomponent responsive systems in which molecular transport is mediated by structures of nanoscale dimensions has become a very fertile research area in biomimetic supramolecular chemistry. Herein, we describe the creation of hybrid mesostructured interfaces with reversible gate-like transport properties that can be controlled by chemical inputs, such as protons or calcium ions. This was accomplished by taking advantage of the surface-initiated polymerization of 2-(methacryloyloxy)ethyl phosphate (MEP) monomer units into and onto mesoporous silica thin films. In this way, phosphate-bearing polymer brushes were used as "gatekeepers" located not only on the outer surface of mesoporous thin films but also in the inner environment of the porous scaffold. Pore-confined PMEP brushes respond to the external triggering chemical signals not only by altering their physicochemical properties but also by switching the transport properties of the mesoporous film. The ion-gate response/operation was based on the protonation and/or chelation of phosphate monomer units in which the polymer brush works as an off-on switch in response to the presence of protons or Ca(2+) ions. The hybrid meso-architectured interface and their functional features were studied by a combination of experimental techniques including ellipso-porosimetry, cyclic voltammetry, X-ray reflectivity, grazing incidence small-angle X-ray scattering, X-ray photoelectron spectroscopy, and in situ atomic force microscopy. In this context, we believe that the integration of stimuli-responsive polymer brushes into nanoscopic supramolecular architectures would provide new routes toward multifunctional biomimetic nanosystems displaying transport properties similar to those encountered in biological ligand-gated ion channels.     

Effect of Gold Nanoparticles on the Structure and Electron‐Transfer Characteristics of Glucose Oxidase Redox Polyelectrolyte‐Surfactant Complexes

Efficient electrical communication between redox proteins and electrodes is a critical issue in the operation and development of amperometric biosensors. The present study explores the advantages of a nanostructured redox‐active polyelectrolyte–surfactant complex containing [Os(bpy)₂Clpy]²⁺ (bpy=2,2′‐bipyridine, py= pyridine) as the redox centers and gold nanoparticles (AuNPs) as nanodomains for boosting the electron‐transfer propagation throughout the assembled film in the presence of glucose oxidase (GOx). Film structure was characterized by grazing‐incidence small‐angle X‐ray scattering (GISAXS) and atomic force microscopy (AFM), GOx incorporation was followed by surface plasmon resonance (SPR) and quartz‐crystal microbalance with dissipation (QCM‐D), whereas Raman spectroelectrochemistry and electrochemical studies confirmed the ability of the entrapped gold nanoparticles to enhance the electron‐transfer processes between the enzyme and the electrode surface. Our results show that nanocomposite films exhibit five‐fold increase in current response to glucose compared with analogous supramolecular AuNP‐free films. The introduction of colloidal gold promotes drastic mesostructural changes in the film, which in turn leads to a rigid, amorphous interfacial architecture where nanoparticles, redox centers, and GOx remain in close proximity, thus improving the electron‐transfer process.     

Manipulation of molecular transport into mesoporous silica thin films by the infiltration of polyelectrolytes

The design of hybrid mesoporous materials incorporating polymeric assemblies as versatile functional units has become a very fertile research area offering major opportunities for controlling molecular transport through interfaces. However, the creation of such functional materials depends critically on our ability to assemble polymeric units in a predictable manner within mesopores with dimensions comparable to the size of the macromolecular blocks themselves. In this work, we describe for the first time the manipulation of the molecular transport properties of mesoporous silica thin films by the direct infiltration of polyelectrolytes into the inner environment of the 3D porous framework. The hybrid architectures were built up through the infiltration-electrostatic assembly of polyallylamine (PAH) on the mesopore silica walls, and the resulting systems were studied by a combination of experimental techniques including ellipso-porosimetry, cyclic voltammetry and X-ray photoelectron spectroscopy, among others. Our results show that the infiltration-assembly of PAH alters the intrinsic cation-permselective properties of mesoporous silica films, rendering them ion-permeable mesochannels and enabling the unrestricted diffusion of cationic and anionic species through the hybrid interfacial architecture. Contrary to what happens during the electrostatic assembly of PAH on planar silica films (quantitative charge reversal), the surface charge of the mesoporous walls is completely neutralized upon assembling the cationic PAH layer (i.e., no charge reversal occurs). We consider this work to have profound implications not only on the molecular design of multifunctional mesoporous thin films but also on understanding the predominant role of nanoconfinement effects in dictating the functional properties of polymer-inorganic hybrid nanomaterials.